Solutions for Surface Refinement

NanoLandGlobal & Diener

What is Nanotechnology?

Nanotechnology is the design, characterization, production and

application of structures, devices and systems by controlling

shape and size at the nanoscale (NanoDictionary Basel: Collegium Basilea 2005)

We are working at a scale where structures/materials are one

dimension below 100 nm or about 100,000 times smaller than

the width of one human hair!

The Global Impact of Nanotechnology

It is estimated by some analyst reports that 10% of all jobs can be related to nanotechnology by 2016

Michael Dell, CEO of Dell Computers, was asked, “If you were 20 years old and about to do it all over again, what would you be pursuing today?” Michael Dell answered, “Working with Nanomaterials”

What Functionality Can be Offered?

We work exclusively with equipment manufacturers (including mobile phone

manufacturers)

Normally the goal is not to make the phone last forever (nor to provide protection

from complete immersion)

The goal normally is to protect the electronics from corrosion, so that the phone, etc

return rate for specific countries (eg with high humidity) is reduced to nearly zero

during the warrantee period.

We can provide customised coatings, to extend the corrosion resistance of most

products. If required we can make these completely protected from immersion.

The Characteristics of the Process Coatings using a teflon-like monomers

have found widespread applications in

electronics

The coatings, applied with low pressure

plasma systems give the substrate super

hydrophobic and oleophobic properties

The coatings have become very important

in Electronics to protect against water

corrosion

We offer a complete solution including

capital equipment, consumables, together

with a unique testing technology to test

the coating thickness

Technical Specifications

How can the Coating be Tested?

We developed a process to test the coating thickness.

It uses capital equipment that has been designed

from scratch in-house.

The coating is uniform (conformal) due to the

combination of plasma and process.

The thickness of the coating can be measured on

each batch of circuits boards treated.

The coating thickness can be adjusted per batch if

this is required.

A One Stop Solution

We supply the process both for coating and testing

We supply the Plasma Machines

We supply the Test Machines

We supply the Consumables

We have treated over 1 Million mobile phones with

this process

Next Steps?

Let's open a dialog so we can demonstrate how we

can add value for your business.

Call us on +44 20 3287 9234

info@nanolandglobal.com

www.nanolandglobal.com