dh61ag & ecs g11 assembly
DESCRIPTION
See more on http://touchscreen-apps.blogspot.roTRANSCRIPT
![Page 1: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/1.jpg)
1
All In One Training
ASI ECS G11 Assembly
![Page 2: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/2.jpg)
Getting Started
Lay the system face down making sure not to damage screen
![Page 3: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/3.jpg)
Remove Back Cable CoverPress Tab and Pull off
![Page 4: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/4.jpg)
Remove Back Cover
Undo the five screws holding the cover onSlide to Left, this requires a little force
One under the cable cover
![Page 5: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/5.jpg)
DH61AG Motherboard
DH61AG
DH61AG IO Shield
DH61AG SATA Power cable
![Page 6: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/6.jpg)
Insert ½ Height I/O Shield
Remove from the DH61AG box and place in chassis
![Page 7: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/7.jpg)
Place Backing Plate on Board
Peel off the self-adhesive strip covers from the backing plate that comes with the chassis and affix it to the bottom of the motherboard as shown
![Page 8: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/8.jpg)
Mount MotherboardPlace the motherboard in the chassis being careful to make sure the I/O shield pins clear the sockets on the motherboard. Secure with 4 screws.
![Page 9: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/9.jpg)
Open the CPU Socket
Press down on the CPU socket locking lever and swing the socket frame open. Remove processor cover.
![Page 10: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/10.jpg)
Insert CPU
Carefully align the CPU in the socket using the cutout guides on the processor. Close and secure the locking mechanism.
![Page 11: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/11.jpg)
Install the Wireless Card
Locate the ½ length mini PCIe slot at #7. CAREFULLY (they can be stripped) remove the two mini Phillips screws and place the card edge in the slot. Secure with the mini screws.
![Page 12: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/12.jpg)
Install the mSATA SSD
Locate the full length mini PCIe slot at #15. Make sure the posts fit tightly. CAREFULLY (do not strip) remove the mini Phillips head screws. Insert the mSATA SSD and screw down.
![Page 13: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/13.jpg)
Install the Speaker & Audio Header
Plug in the 1x4 speaker header in the keyed socket at #10. Plug in the front audio header to the yellow set of pins next to the PCIe slot at #12.
![Page 14: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/14.jpg)
Installing the Antenna
Take the antenna lead from the lower part of the case and attach the mini BNC connector to the left post. Attach the antenna lead from the top of the right post on the wireless card.
![Page 15: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/15.jpg)
Connect the FP Switch/LED
Plug the front panel switch/LED connector to point #5 on the side of the board.
![Page 16: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/16.jpg)
Connect the LCD Brightness Hdr
Connect the keyed LCD brightness plug next to the LVDS header in the area marked #14
![Page 17: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/17.jpg)
Plug in the SODIMM Memory
Lay the SODIMM at #2 into the lower memory socket and make sure you lock in place.
![Page 18: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/18.jpg)
Plug in the Dual FP USB
Plug in the keyed front panel USB connector to the USB socket marked #11 to the right.
![Page 19: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/19.jpg)
Plug in the Camera and Panel
• Locate the two 1x5 cables (one is grey the other is black
• These cables will attach to the dual lane USB on the board edge next to the processor socket.
• The dual lane USB pins have 5 pins across one side and four on the other.
• You will need to “punch out” only one of the blocks on the cable so it can go across the pins (top row has 5 bottom has 4 in each case the “fifth” pin is dead.
• Attach both 1X5 cables across the 2x5 USB connector.
![Page 20: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/20.jpg)
Plug in the Camera and Panel (cont)
• First cable
![Page 21: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/21.jpg)
Plug in the Camera and Panel (cont)
• Second cable
![Page 22: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/22.jpg)
Plug In the System Fan
Plug the keyed system fan connector to #4 on the board.
![Page 23: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/23.jpg)
Plug In the Touch Panel
Plug the 1x5 connector to # 6 with the “dead” pin to the right.
![Page 24: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/24.jpg)
Remove the HDD Tray
Remove the two screws on the side of the HDD tray and slide to the left to remove
![Page 25: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/25.jpg)
Mount HDD in Tray
Use the silver flat headed Phillips screws with the long posts through the rubber grommets on the HDD carrier to mount the HDD. Make sure it is in upside down with the connectors opposite the edge of the chassis. Replace carrier in chassis
![Page 26: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/26.jpg)
Mount the “L” Bracket on ODD
Screw the “L” bracket to the back of the ODD with the tiny Phillips screw. Orient the bracket with “L” toward the bottom and the angled slot to the right.
![Page 27: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/27.jpg)
Mount the ODD
Remove the cover plate for the ODD slot by pressing down on the notched center section and lifting the two tabs (the cover is removed by pushing back in the case. Slide the ODD through the slot and secure the “L” bracket at the back to the chassis with a single screw.
![Page 28: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/28.jpg)
Special SATA Power cable
Adapter cable for slim ODD
![Page 29: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/29.jpg)
Locate the SATA Power Cable
Look for the cable that has an “L” connection at one end and a pair of SATA power connections and one large 1x4 Molex power connector
![Page 30: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/30.jpg)
Plug In the SATA Power Cable
Plug the “L” SATA connector into the board at #17. Then plug one SATA power connector into the HDD.
![Page 31: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/31.jpg)
ODD SATA Power & Data Cable
Locate the ODD SATA power & data cable and plug the combo end to the ODD. Connect the 1x4 receptacle to the corresponding socket on the HDD power cable. Plug the SATA data cable to the front socket at #17
![Page 32: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/32.jpg)
HDD SATA Data Cable
Plug the HDD SATA cable into the back of the HDD. Plug the “L” connector at the other end into the second socket at #17
![Page 33: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/33.jpg)
Place the Processor Heat Pipe
Place the heat pipe on the processor socket as shown. Make sure the cooling fins fit into the space provided. Tighten the four spring loaded screws until the heat pipe is firmly seated. Align the fan with the cooling fins and screw down at 3 points.
![Page 34: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/34.jpg)
Attach the Heat Pipe Fan Header
Plug in the heat pipe fan to #3
![Page 35: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/35.jpg)
Do Not Plug In the LVDS Header
• You will need to use the Integrator Tool Kit (ITK) to set the BIOS to use the flat panel display connected through the LVDS header.
• The next step is very important. You must correctly set the power for the flat panel LVDS display
![Page 36: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/36.jpg)
Set the Power Jumpers for LVDS
Back in the area marked #14 there are two blocks at opposite ends with jumpers. The one to the left is a 1x3. Set this across the two right pins. The other is a 2X3 with two pins missing. Set this jumper across the back two furthest to the right. Each is marked with an
![Page 37: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/37.jpg)
Connect the DVI Monitor
• Before you can use the built-in flat panel (LVDS) display, you will have to use the Intel Integrator Tool Kit (ITK) to enable the BIOS (the default is no LVDS device installed).
• Also plug in the USB keyboard and power supply• Plug in the DOS bootable USB thumb drive with the
DOS version of the ITK.
![Page 38: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/38.jpg)
Hit F2 to Enter the BIOS
• Scroll over to the “Boot” tab• Scroll down to “Boot to Removable Devices” and
make sure it reads <Enable>• Scroll down to “Boot USB Devices First set to
<Enable>• Plug in the DOS bootable USB thumb drive with the
DOS version of the Integrator Tool Kit (ITK)• Press the F10 key “Exit Saving Changes (Y/N)” and
press “Y” the system will reboot to the USB key
![Page 39: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/39.jpg)
Using the ITK for DOS
• When you see the “C:\” prompt type in the following (the command is case sensitive, so type exactly as shown) and hit “Enter”
• itoolkit EXTRACT –config –tokens –ini=ag_g11.ini• The EXTRACT command creates a visual file with
the various BIOS commands/functions.• The screen will look similar to this
![Page 40: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/40.jpg)
Modify the ag_g11.ini File part 1
• Boot your laptop and plug the bootable USB key into it
• Use “Wordpad” to edit the g11.ini file• Use CTRL F command and find IGD Flat Panel• Change the “Value” from 0:Disable to 1:LVDS
![Page 41: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/41.jpg)
Modify the ag_g11.ini File part 2
• Use CTRL F command and find Pre-Defined EDID• Change the Value from 3 to 15 (1080P)
![Page 42: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/42.jpg)
Modify the ag_g11.ini File part 3
• Use CTRL F command and find IGD Secondary Video Port
• Change the Value from 0 : None to 3 : DVI-I Digital; IGD Secondary Video Port;---------------------------------------; Select a single value from this list:; 0 : None (default); 2 : DVI-I (Blue) Analog; 3 : DVI-I (Blue) Digital; 5 : HDMIValue=3
![Page 43: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/43.jpg)
Modify the ag_g11.ini File part 4
• Use CTRL F command and find Screen Brightness• Change the Value to 6 : Brightest
; Screen Brightness;---------------------------------------; Select a single value from this list:; 0 : Dimmest (default); 1 : Dimmer ; 2 : Dim; 3 : Neutral; 4 : Bright; 5 : Brighter; 6 : BrightestValue=6
![Page 44: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/44.jpg)
Modify the ag_g11.ini File part 5
• Save the file as ag_g11.ini to the bootable USB drive and exit Wordpad.
• Open the ag_g11.ini file and check that the changes were saved. If not, repeat the 4 steps. If done, exit the program remove the bootable USB drive and plug it back into the g11 system then boot the g11 to the USB drive.
![Page 45: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/45.jpg)
Updating the BIOS with ITK
• At the C:\ prompt type the following command (case sensitive)
• Itoolkit INSTALL –config –tokens –ini=ag_g11.ini• The INSTALL command will write your modifications
to the BIOS• Hit the enter key and your screen should look
similar to this
![Page 46: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/46.jpg)
Turn Off the System
• Unplug the power supply and the DVI monitor• Remove the bootable USB drive• Gently push the LVDS cable into its receptacle on
the board in area #14. Use the edges and avoid pushing on the wires.
![Page 47: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/47.jpg)
Booting the Flat Panel Display
• Plug in the power supply and start the system• The LCD flat panel should be on
![Page 48: DH61AG & ECS G11 Assembly](https://reader033.vdocuments.site/reader033/viewer/2022061306/54b423734a79595d448b45de/html5/thumbnails/48.jpg)
Install the Stand
• Using the six screw points from the inside of the back cover, secure the stand
• Slide the cover on the back of the system. Screw in the five points to secure the chassis. Plug in the power, replace cable cover