detent pins carr lane
TRANSCRIPT
-
8/3/2019 Detent Pins Carr Lane
1/3
Pages 10-11
Pages 13
Page 14-15
Pages 16-17
Pages 18-19
Page 20
Page 8
(Rev. 6-10)
TECHNICAL INFORMATION
BALL LOCK PINSBALL LOCK PINS
Precision alignment pin with a ground shank. This popularsingle-acting type is positive locking until released by push-ing the button, which moves the center spindle forward to
allow the locking balls to retract into a radial groove. Widestrange of types and sizes, in steel or stainless steel. Choiceof four handle styles: T, L, Button, and Ring. Standardshank diameters from 3/16 to 1" (5 to 20mm in metric). Anygrip length up to 6" (150mm in metric) is available as stan-dard, at no extra charge. Available from stock in manystandard grip lengths, or quickly made to order in customlengths and diameters.
MARINE BALL LOCK PINS
Similar to our standard single-acting Ball Lock Pins in stain-less steel, except this type has its handle and button madeof 300-series stainless steel. Choice of two handle styles:Recessed Button and Ring. Shank diameters from 3/16 to1/2", each available in a choice of several standard griplengths. Available from stock only (not made to order).
HEAVY-DUTY BALL LOCK PINS
Similar to our standard single-acting Ball Lock Pins, exceptwith a heavier handle for rough service. Available only instainless steel. Handles are made of solid stainless steelfor maximum impact strength (high-strength reinforcedplastic optional), and are specially shaped to prevent acci-dentally pressing the release button. Choice of four handlestyles: T, L, Button, and Ring. Shank diameters from 3/16to 1/2 (5 to 12mm in metric), each in a choice of severalstandard grip lengths. Available from stock only (not madeto order).
ADJUSTABLE BALL LOCK PINS
These Ball Lock Pins have an adjustable grip length. Theycan be used for clamping, or simply to provide a variablegrip length. The threaded handle turns to provide a 1/2"clamping range or adjustment range. Available in steel or
stainless steel. Choice of three handle styles: Knob, T, andL. Standard shank diameters from 1/4 to 1" (6 to 20mm inmetric), each in a choice of many standard grip lengths.Other grip lengths are available as specials (extra chargeand longer delivery time).
DOUBLE-ACTING BALL LOCK PINS
Similar to a single-acting pin, except the center spindle hastwo grooves instead of one, to release the ball by eitherpushing or pulling. Pushing on the handle releases theballs and inserts the pin in one motion. Pulling on the han-dle releases the balls and removes the pin in one motion.Available in steel or stainless steel. Choice of three handlestyles: T, L, and Ring. Standard shank diameters from 3/16to 1" (5 to 20mm in metric). Any grip length up to 6"(150mm in metric) is available as a standard, at no extracharge. Available from stock in some standard grip lengths,or quickly made to order in custom lengths and diameters.
LIFTING PINS
A single-acting ball lock pin with a solid, one-piece bodyand four balls for high tension loads. Positive locking untilreleased by pushing the button. Sturdy forged shackle forheavy lifting. Shank diameters from 1/4 to 1", each in achoice of several standard grip lengths. Available fromstock only (not made to order).
-
8/3/2019 Detent Pins Carr Lane
2/3
MIN.190.250
.313.375
.438
.500
.563
.625
.750
.8751.000
NOM.DIA
3/16 (#10)1/4
5/163/87/161/2
9/165/83/47/8
1
Page 9
(Rev. 1-06
STRENGTH DATA (USA)
STEEL2,1004,000
6,0009,20012,30016,00020,50025,50036,70050,00065,500
Blank (2 Ball)4 Ball
DFT
T-SL
L-SR
R-SB
B-S
A2SA2CA5SA5CA6S
A6CA3SA3C
Grip LengthShank Dia.Shank Material
MS179 90 5 25C
CL 5 BPDR 2.50 S
MS CONVERSIONS
(MS-certified pins available as specials at higher cost)
NAS CONVERSIONS
(NAS-certified pins available as specials at higher cost)
COMPONENTShank
SpindleHandle-BLPT,BLPL,ABPHandle-BLPR,BLPB,BPD
Collar
Button
BallsSpringHandle RingS-HookS-Hook Band
BLP, BPDAPPROX. WEIGHT
(OUNCES)
BLP, BPD, ABPAPPROXIMATE
PULL OUTSTRENGTH
(LBS)
200230
510575710
116014202070297039005400
RECOMMENDEDHOLE DIA
MAX.194.254
.317.379
.443
.505
.568
.630
.757
.8821.010
PER IN..15.25
.40.50
.62
.801.201.352.302.733.47
DEPINSERTION/
REMOVAL FORCE(LBS)
5mm6mm8mm
10mm12mm16mm20mm
2266
101515
1,4002,1003,7005,8008,500
15,40021,600
1.251.752.002.403.404.004.25
.15
.25
.40
.50
.801.352.30
STRENGTH DATA (METRIC).201.240.319.398.477.635.794
.197
.236
.315
.394
.472
.630
.787
230230510710
116020702970
2,6004,0007,000
11,00016,00029,00045,200
3,0004,4008,000
12,50018,00032,50050,900
2,5004,0007,200
11,40016,50029,50046,100
77
1414223030
Type
C
S (Stainless)Blank (Steel) D
BlankD
Blank
D
D
BLP Only* 10ths Inches
1.50 S 4BALL
No. ofBalls
(2 Standard)
F
GripLength
Type andShank Dia.(in 16ths)
63NAS13 C7C 15
Handle MaterialHandle Type
Shank Material
RBPDC L 1 6
Drive OutOption
*These are the only standard combinations of Handle Material, Handle Style, Spindle Material, and BLP-BPDtype directly convertible from NAS to Carr Lane. Other combinations are available as specials.
84 BLPB85 BLPT86 BLPL87 BLPR88 BPDT89 BPDL90 BPDR
Dia. in16ths
10ths Inches
BLP, BPD, ABP, LFPCALCULATED
DOUBLE SHEARSTRENGTH (LBS)***
MIN22
668
101015152020
MAX77
141417222230303540
STAINLESS2,3004,500
7,10010,20013,60018,00023,00028,70041,00056,20073,500
STEEL2,2004,200
6,7009,70013,20017,50022,00027,50039,50050,00070,700
STAINLESS2,0002,200
3,5005,0007,0009,200
11,50013,50020,50028,50037,200
MATERIAL SPECIFICATIONS(Any options listed below are manufacturing options, not options selectable by the customer.)
STAINLESS STEEL PINS17-4 PH, heat treated, 180,000 psi min. tensile strength,or equivalent (300 Series on Detent Pins)**17-4 PH or 416 stainless steelAluminum alloy, black or plain finish303 stainless, or aluminum alloy, black finish
303 stainless
302 or 303 stainless, or aluminum alloy, anodized
440 C stainless17-7PH or 302 stainless302 stainless302 stainless15-7MO or 302 stainless
ALLOY STEEL PINS4130 steel, heat treated, 160,000 psi min. tensile strength,zinc or cadmium plated**4130 steel or 416 stainlessAluminum alloy, black or plain finishCarbon steel, zinc or cadmium plated,or aluminum alloy, black finishCarbon steel, zinc or cadmium plated
Carbon steel, zinc or cadmium plated,or aluminum alloy, anodized440 C stainless17-7PH, 302 stainless, or music wireCarbon steel, zinc or cadmium plated, or 302 stainlessCarbon steel, zinc or cadmium plated, or 302 stainlessCarbon steel, zinc or cadmium plated,or 15-7MO or 302 stainless
DEPCALCULATED
DOUBLE SHEARSTRENGTH (LBS)***
HANDLE1.251.75
2.002.402.903.403.654.004.258.319.00
T-ST
L-SL
R-S
R
C2CS2SC5CS5SC7C
S7S
BPD Only*BLP BPD DIA33 53 334 54 435 55 536 56 637 57 7
38 58 839 59 940 60 1041 61 1242 62 1443 63 16
***Pins with grip lengths over 8" (special) are not heat treat-ed, in order to maintain straightness. Double shearstrength will be reduced approximately 20-50%. Steelpins over 8" long will have a black oxide finish instead ofplating. Pins in larger diameters than listed here are avail-able as specials (may be made from alternate steels).
***2:1 Safety factor
-
8/3/2019 Detent Pins Carr Lane
3/3
Page 25
(Rev. 7-02
Ordering Example (Metric):
CLM - 6 - DEP - 50 - S - C
Add M for metricDiameter (mm)
Grip length (mm)Add -S for stainless steel (steel is standard)
Add -C for attached cable assembly
Ordering Example (USA):
CL - 4 - DEP - 1.50 - S - C
Diameter (16ths of an inch)Grip length (inches)
Add -S for stainless steel (steel is standard)Add -C for attached cable assembly
PART NO.CLM-6-DEP-xxCLM-8-DEP-xxCLM-10-DEP-xxCLM-12-DEP-xxCLM-16-DEP-xxCLM-20-DEP-xx
ADIA
ACTUAL
.2342
.3130
.3917
.4704
.6279
.7854
NOMINAL
6mm8mm
10mm12mm16mm20mm
Solid alignment pin with spring-loaded locking balls (notpositive locking like a ball lock pin). Simply push pin toinsert, and pull to remove. Available in steel or stainlesssteel. Standard shank diameters from 3/16 to 1" (6 to20mm in metric). Note: 3/16-diameter pins have one ballinstead of two, due to their small size. Any grip length upto 6" (150mm in metric) is available as a standard, at noextra charge. Available from stock in many standard griplengths, or quickly made to order in custom lengths anddiameters.
Optional CableOptional cable assemblies are 12" long, with a terminal athe free end for a #10-32 or M5 attachment screw. (CL-82-KA-12.0).
DETENT PINSSEE PAGE 9 FOR MATERIAL SPECIFICATIONS
PART NO.CL-3-DEP-x.xxCL-4-DEP-x.xxCL-5-DEP-x.xxCL-6-DEP-x.xxCL-7-DEP-x.xxCL-8-DEP-x.xxCL-9-DEP-x.xxCL-10-DEP-x.xxCL-12-DEP-x.xxCL-14-DEP-x.xxCL-16-DEP-x.xx
EDIA
1.00
1.50
2.00
DDIA
.375
.438
.500
.563
.625
.688
.750
.8751.0001.125
C.250.344.359.390.469.516.593.672.750.859.984
ACTUAL
.1880
.2480
.3105
.3730
.4355
.4980
.5605
.6230
.7480
.8730
.9980
NOMINAL
3/16 (#10)
1/45/163/8
7/161/2
9/165/83/47/8
1
F
.562
6.00
4.50
4.00
xx
3.75
2.75
x
3.00
xx
2.25
x
1.75
x
x
1.25xxx
1.00xxxx
.75xxx
.50
x
2.50
xxx
ADIA
STOCK GRIP LENGTHS, ALLOY STEEL (INCHES)
B.217.280.360.430.495.570.645.720.860
1.031.16
USA
5.00
= STOCKED IN ALLOY STEEL ONLYX = STOCKED IN ALLOY AND STAINLESS STEEL
1.50xxxxx
2.00
xxxx
METRIC
B.266.363.451.540.725.897
C.344.359.390.516.672.750
DDIA.375.438.500.563.750
1.000
EDIA
1.00
1.502.00
F
.562
100
908060 7050
40
30
25
20
15
STOCK GRIP LENGTHS, ALLOY STEEL (MM)
10
BMIN
A+.000.003
FMAX
CMAX
D.015
E DIA1/16GRIP+.020.000
IBP
3.25
3.50
x