details of tune and method setup for ltq orbitrap application: nanospray, peptides gary woffendin,...
TRANSCRIPT
Details of Tune and MethodSetup for LTQ Orbitrap
Application: nanospray, peptides
Gary Woffendin, Michaela ScigelovaThermo Electron, UK
Tune file - nanospray
Tune file - nanospray
Tune file - nanospray
Tune file - nanospray
Tune file - nanospray
Tune file - nanospray
Tune file - nanospray
Tune file - nanospray
Micro AS autosampler settings
Note: Micro AS must be put back to ‘Menu/Serial’ (use the touch screen)Note: in sample table the vial position should be ‘1a1’
Micro AS autosampler settings
Wash solution: water
Micro AS autosampler settings
Surveyor LC settings
Surveyor LC settings
LTQ Orbitrap settings
LTQ Orbitrap settings
LTQ Orbitrap settings
LTQ Orbitrap settings
Exclusion duration set to about ½ peak width (here 15 sec)
LTQ Orbitrap settings
LTQ Orbitrap settings
LTQ Orbitrap settings
LTQ Orbitrap settings
LTQ Orbitrap settingsScan event 2 – MS/MS of the 1st most intense ion
LTQ Orbitrap settingsScan event 3 – MS/MS of the 2nd most intense ion
LTQ Orbitrap settingsScan event 4 – MS/MS of the 3rd most intense ion
Divert Valve
Method Summary
Method Summary