detail specifications - farmall technology machines.pdf · detail specifications mailing address: 1...

Detail Specifications

Mailing Address:

1 Km, Defence Road, Bhoobatian Chowk,

Raiwind Road, Lahore 54600, Pakistan

Email: [email protected]

Toll Free: 0800 87787

Telephone: 0092 42 3532 2124

Fax: 0092 42 3532 2205

www.farmalltechnology.com

Earthmoving – Soil Scrapper

Earthmoving: Farm mechanization demands long fields for infield efficiency of water

application and machines operation. Soil shifting is time-taking and expensive operation.

Further, upper 4 inch (10 CM) soil is most productive. Dragging of soil during soil shifting

process makes soil powdery which reduces water absorption capacity of the soil effecting

plants growth. Additionally, dragging action compacts the lower soil.

Soil Scrapper: Front closing soil scrapper fill the bucket with loose soil, front door of the

bucket is closed hydraulically. Scrapper is lifted and it runs on wheels to the fill area,

front door opens gradually and soil is pushed out in a uniform layer.

Specifications: Standard machine requires 90 to 100 HP tractor to fills 71 cubic feet (2

cubic meter) of soil, close its throat and run on wheels, without dragging on land, and

ejects soil uniformly at destination. Machines from 75 to 200 HP are available on order,

manual, laser or GPS assisted with variations to suit soil conditions and work-output

requirement.

Suitability: This is a low cost but very efficient machine equally suitable for agriculture

and construction industry.

[email protected]


Laser Land Leveling

Fine Leveling: When major soil is shifted, laser leveler is used for fine leveling. Laser

leveler should be used only where land leveling variation is not more than 2 inches (5

CM).

Specifications: Standard machine is 8 feet (2.5 M) wide and requires minimum 75 HP.

Bigger and smaller machines are supplied on order.

[email protected]


Front end loader mounts on the front of a tractor. It is used to load soil, farm yard

manure, farm produce, animal feed etc., on a trailer. Efficient machine for loading.

Specifications:

Standard machines has bucket capacity of 1 cubic meter and weight lifting of up to

0.75 tone. Different sizes and bucket designs are available to meet every need.

Front End Loader

[email protected]


Water inundation is very harmful to the plants,

soil biota, soil texture and nutrients. In the flat

irrigated lands it is strongly recommended that

permanent raised bed should be made for the

crop growing and furrows are kept for as

irrigation channels. For this purpose, a raised

bed maker is offered:

Specifications:

Depending upon tractor HP, required output and

field size 1 to 4 beds machines are available.

Further size of the bed is also variable,

depending upon crop, water saturation capacity

and wheel base of the tractor.

Options: Several attachments can be mounted

on the bed maker such as:

• Fertilizer applicator

• Compost applicator

• Various applicators for the powder,

granular or liquid farm chemicals

Machines are made on order, strictly meeting

crop production program.

Raised bed Maker

[email protected]


Transplanting is a labour intensive application and is difficult to apply on large

acreage. Seedlings are raised in a nursery area for open field transplanting.

Placement of seedlings in a dry soil at an accurate distance while instantly watering

plants to minimize trauma is essential. Our Water Wheel Transplanter is designed

achieve these objectives. All kind of crops with variable row to row and plant to plant

at an accurate distance can be maintained. This machine is custom build on order.

Options: Number of beds, row-to-row and plant to plant spacing.

Water Wheel Transplanter

It is a necessary supporting machine for the

Water Wheel Transplanter. It feeds water and

plant nursery to the Transplanter operating in

the field for uninterrupted operation.

Options: Wheel base, water and nursery trays

feeding capacity, water pump and hoses.

Water Bowser

[email protected]


Latest crop production process has moved on to Raisedbed farming, that offer

following benefits:

Single pass operation & No tillage required

Provides moist soil to plants for consistent growth - NOT saturated

Controlled traffic compact furrows to reduce water seepage

Biota fosters in raised beds which is like a food factory for plants

Soil cover reduces requirements of other inputs to ZERO after few crops

Reduce water requirements by 70% due to little evaporation, therefore NO

accumulation of salts and increase in Ph. value

These machine are custom made and can do the following functions:

Pulverize the soil

Make raisedbeds

Band fertilizer on the side of plant rows in root zone (Optional)

Band compost in the root zone of plants (Optional)

Plant (big seeds) such as sunflower, corn, cotton, soybean seeds at

accurate plant-to-plant distance with air vacuum, pneumatically

Low-Till Single Pass Raisedbed

Precision Planter

[email protected]


This machines is meant for planting small seeds.

These machine do the following functions:

Make raisedbeds

Band fertilizer on the side of plant rows in root zone

(Optional)


Plant small seeds such as wheat, carrots, rape seed

etc., randomly up to five rows on a bed.

Options: One to four bed machines with fixed or adjustable row to row

distance, metering system, fertilizer, compost banding and

combining other applications such as weedicides.

Raisedbed Random Seeder

[email protected]


Latest crop production process has moved on to Raisedbed

farming, that offer following benefits:

Provides moist soil to plants for consistent growth - NOT

saturated


Biota fosters in raised beds which is like a food factory for

plants

Soil cover reduces requirements of other inputs to ZERO

after few crops

Reduce water requirements by 70% due to little

evaporation, therefore NO accumulation of salts and

increase in Ph. value

These machine are all-in-one and do the following functions:

Make raisedbeds

Band fertilizer on the side of plant rows in root zone

(Optional)


Plant (big seeds) such as sunflower, corn, cotton, soybean

seeds at accurate plant-to-plant distance with air vacuum,

pneumatically

Raisedbeds

Raisedbed Precision Planter

[email protected]


Latest crop production process has moved on to Raisedbed farming, that

offer following benefits:

Provides moist soil to plants for consistent growth - NOT saturated


Biota fosters in raised beds which is like a food factory for plants

Soil cover reduces requirements of other inputs to ZERO after few

crops

Reduce water requirements by 70% due to little evaporation, therefore

NO accumulation of salts and increase in Ph. value

These machine are all-in-one and do the following functions:

Make raisedbeds

Band fertilizer on the side of plant rows in root zone (Optional)


Plant (big seeds) such as sunflower, corn, cotton, soybean seeds at

accurate plant-to-plant distance with air vacuum, pneumatically

Plant small seeds such as wheat, carrots, rape seed etc., randomly up

to five rows on a bed.

Raisedbed Planting System – All-

in-One

[email protected]


It is a break through in crop production

technology. Under this crop production process,

we increase 33% plants in the same space as

compared to the traditional furrow planting,

while saving water and other inputs. Over 40%

yield increase has been experienced.

Options: one to four bed planting machines,

with fertilizer, compost and agrochemical

applicators.

Raised Bed Potato Planter

[email protected]


This is state of an art machine which can operate

between plant rows planted on raised beds as close as

8 inches (20 CM), with complete accuracy and without

damaging the plants. Machine can cater plants

planted between 8 to 96 inches (20 to 244 CM) row

spacing.

Options: Machines covering one to three beds are

made available, for most type of crops.

Precision Weeder Aerator

[email protected]


We have full range of tine type plows/ ploughs suitable for 50 to 120 HP tractors to

break hardpan at variable depths and soil pulverization.

Options: Clod breakers in various designs, tine shapes and mouse attachments to

make underground drainage system, this is a very useful attachment where soil washing

is required to decrease salinity and or alkalinity.

Chisel Plow/Plough with Clod

Breaker

[email protected]


Spraying farm chemicals is a delicate operation. There are three major groups of farm

chemicals (Pesticides, Fungicides & Weedicides in soluble and emulsion) i.e. Systemic,

Contact and Broad Spectrum. In an acre of crop there are 3,000 to 100,000 plants with

millions of leafs & enormous surface area; different plant heights, plant structure and

canopy. It is required that equal layer of coat is applied on the total surface area. There

are many variables, hard to reach places, ambient temperature, humidity in the air and

wind velocity causing drift. Management of droplet size, its uniformity, drift control,

evaporation are some of the highly technical challenges. We offer machines to handle

most challenges.

Options: Boom size in width, type of nozzles, tank capacity, mounted or trailed, tank

agitators, pump type and filtration. These are made to order machines. Other options

are for greenhouse/tunnels, open field and orchids applications.

Spry Machines

[email protected]


Sugarcane is a difficult crop to harvest. Self-propelled harvesters are very expensive and

are meant for large plantations. For smaller farmers a low cost machine was felt

essential. FarmAll developed this machine for the 1st time in the world. It cuts cane at

the ground level and lay it in a swath. It can either be lifted with a frontend loader to

load on a trailer and or stripped, bundled and loaded manually.

In each country line to line distance of plant rows is different, it could be anywhere from

20 to 60 inches (50 to 152 CM). Reaper can reap one or two rows at a time, depending

upon number of rows between 60 inch (152 CM) operating width.

Options: Mechanical and hydrostatic versions.

Sugarcane Reaper

[email protected]


Normally corn is harvested with a self-propelled combine harvester equipped with

maize header. Harvester pick cobs when dried and shell corn from cob, clean grain and

fill it in the inbuilt storage tank, from where it is moved on to a trailer with an auger.

Harvester are very expensive and meant for large scale commercial operation.

Secondly, harvesters can not pick green corn for the table market.

Corn Picker, can pick corn dried or in green form and fill it in the bucket mounted

behind the tractor. This machine can pick cobs from three rows planted between 26 to

32 inch (66 to 82 CM) row spacing, simultaneously.

Corn Picker

[email protected]


Plow – Ploughs are meant to pulverize the soil. Soil Science established that plowing is

very harmful for soil as well as life in the soil. Therefore, present time farming practices

are focused on low-till and even No-Till crop production processes.

However, these are still in use by majority of farmers, especially in underdeveloped

countries.

We make range of plows from 2 to 8 disc for 35 to 120 HP tractors.

Options: Fixed and Reversible.

Disc Plow / Plough

[email protected]


Pulverizing is very harmful for soil as well as life in the soil. Therefore, present time

farming practices are focused on low-till and even No-Till crop production processes.

However, these are still in use by majority of farmers, especially in underdeveloped

countries.

We make range of harrows from 12 to 36 disc for 50 to 120 HP tractors.

Options: Tandem, Offset, Mounted and Trailed.

Disc Harrows

[email protected]


This machine is commonly used for mulching crop residues and making seedbeds for

planting next crop. We make all types and sizes, suitable from 35 to 120 HP tractors.

Raised Bed Renovator: This is our specialized machine for single pass low-

till crop production process. We make in one and three bed raised-bed renovators.

Rotavator – Raised Bed

Renovator

[email protected]


Trailers are used to transport inputs to the field and produce from field to farmyard or

markets. We make trailers in all sizes, shapes and features.

Options: Dimensions, Breaking System, Axle Load, Rim size; back, side or raise and

side tilt custom build are available.

Trailers

[email protected]


detail specifications - farmall technology machines.pdf · detail specifications mailing address: 1...

Documents