7/27/2019 Design Project - Final Template

1/1

TEMPLATE DESIGN2008

www.PosterPresentations.com

Title of the Design ProjectAuthors Name, Reg. No

Guided by : Prof. Guide NameSchool of Mechanical & Building Sciences

Introduction (Font: Perpetua/44)

Introduction to the basic concepts

Applications of the design

What is the need for designing the model?

Problems associated with the current model

Brief introduction about the approach you

have planned in this model

All the above information should be addressed

in the Introduction part in the form of bulletins

Font : Perpetua; Size : 40

Methodology & Objectives

Design Calculations

Design Calculations

The proposed design should be calculated for

the imposed conditions and for the material etc.

Required formulae and the design calculations

have to be mentioned clearly and the final set

of imposed conditions may be tabulated (Fore.g.)

Initial Stress = (Formulae)

Factor of Safety = Value (Assumed)

Use this portion also for the design calculations

and the resultant information

A complete 3 D model and other views

including the exploded views of the CAD design

of the work can be pasted in this portion

If you made any iterative work on the design

improvements, that could be represented as the

design stages

Bill of materials can be provided at the end of

this portion

Based on the imposed conditions, you should conduct the analysis on theproposed model using the CAE package. The imposed conditions,

Discuss the outcomes and the inference from

the analysis. Justify whether the model has

satisfied the imposed conditions or not with the

primitive analysis

Or propose the new design with modifications

in the existing model

Learning Outcomes -

Discuss in brief on the learning outcomes of the

design project work and the knowledge gained

on the successful accomplishment of this design

project

It should be given in the bulletins

Discuss the objectives of the work in bulletin

points

For the framed objectives, mention the

proposed methodology in a step by step

mannerThe methodology should be represented in the

flow chart (For e.g.)

Literature Survey

Initial CAD design

Design calculations

Analysis

Font : Perpetua; Size : 40

Design Calculations

CAD Model

Software employed :

Analysis

Analysis

References

This soft copy of the template has been sent to the concerned faculty guide(s).

Students are required to make use of the template for completing your design

project.

Students are requested to take the color print out of the poster in A4 sheet even

though the template bears A3 format

Submission deadline of the poster format report will be on or before 30 th April 2013

If the poster doesnt follow the font regulations and the format will not be

considered for evaluation and the also marks for the final viva-voce will not be

awarded