design of a controlled platform using open source hardware
DESCRIPTION
Design Of A Controlled Platform Using Open Source Hardware. Manuel Zeno 10/26/2011. Platform Designs. There are many types of controlled platforms Some are autonomous, i.e. self-leveling to the horizon Others can be controlled remotely - PowerPoint PPT PresentationTRANSCRIPT
Design Of A Controlled Platform Using Open Source Hardware
Manuel Zeno10/26/2011
Platform Designs• There are many types of controlled platforms
– Some are autonomous, i.e. self-leveling to the horizon– Others can be controlled remotely
• The proposed platform is designed to be autonomous while providing the user with angular control while costing less than $100
• Applications include nautical satellite tracking, camera stabilization, etc.
Proposed Design
• The concept design uses inexpensive parts to prove the open source hardware control works
• The platform will autonomously control two axis of rotation, pitch and roll using an Arduino Board
The Control System
• The platform is controlled via an open source Arduino microcontroller board
• The Arduino platform uses a variation of the C programming language as input and a ATMega microcontroller chip.
Tilt Sensing Using an Accelerometer
• The Arduino board reads data from an accelerometer to measure tilt angle– The measurement is indirect – In reality the accelerometer is measuring the acceleration
due to gravity in a given sensing axis• The sensed acceleration allows the board to infer the
angle the accelerometer is at any given time
Going from Gs to Degrees• The accelerometer measures
acceleration due to gravity in this case• As the sense axis is tilted, the
acceleration due to gravity sensed changes by the cosine of the angle of tilt
• Nothing in real life is ever linear…– Sensing sensitivity drops off as the sense
angle increases• The sensitivity drop-off can be
approximated using the inverse sine (arcsine) function
• Some error remains, but its smaller than the mechanical slop exhibited by the servos and hardware
Control System 2• Arduino programs are called
“sketches”• The Arduino program includes all
the aforementioned control schemes and also an “averaging” function
• Raw data from the accelerometer is “twitchy” and prone to outliers
• The code includes an “outlier eliminator” function which removes readings higher than limits from being averaged
• Averaging function allows for bulk measurements to be read
Control System Concluded• What distinguishes this design from others is the ability to control the
angle at which the platform attempts to remain at autonomously• This is done by having the user control the angle using potentiometers
– Twisting the potentiometers in one direction or another will change the resistance of the pot
– The resistance change read by the Arduino board will change the default angle value sent to the servos
Platform Demonstration
• Goto webpage