design, display and design standards placement standards for · placement standards for 911 civic...
TRANSCRIPT
Design, Display andPlacement Standards for911 Civic Number Signs
In areas of provincial civic addressingjurisdiction*, civic number sign design, displayand placement must conform to strictstandards.
These standardsare presented indetail in thisbrochure.
Any new orreplacement civicnumber sign mustbe manufacturedand displayed tomeet thesestandards.
These stipulationswere created in theinterest of publicsafety. It isessential that such civic number signs beeasily recognizable by both their appearanceand consistency of placement in order thatemergency service providers can locate theirdestination.
* Provincial civic addressing jurisdictionincludes all parts of PEI, excluding thefollowing municipalities: Charlottetown,Summerside, Cornwall, Stratford, Souris,Alberton, Montague, Borden-Carleton,O’Leary, Brackley, Georgetown, Tignish,Kensington, Victoria, Kinkora, Wellingtonand Miscouche.
Design Standards
Sign PlateC .049 thickness aluminumC 1/2" radius cornersC 1/4" holes top and bottom, centered 1/2" in
on horizontal centre line of plateC Finished one side onlyC Blue, engineer grade reflective backgroundC White, engineer grade reflective numberingC 4" letter size, font is “Highway D”C Sign sizes are:
5" x 8" (1-2 digits), 5" x 12" (3 digits), 5" x 14" (4 digits), 5" x 16" (5 digits)
C See Diagram 1 for details.
Sign Post (Recommended)C 13 gaugeC Total length will be 5' 6" (1.68 metre)C Rustproofed steel by phosphate etchingC Black acrylic enamel finishC Grade marker at 18" (.45 metre) from
bottom endC Pointed at bottom end, so as to be easily
drivenC Post to have two holes, both 1/4" diameter
at 4" on centre; top hole to be 2" from top ofpost
C See Diagram 2 for details.
Installation HardwareC Two, 3/16" x 1 1/4", zinc plated, round,
slotted head, stove boltsC Two, zinc plated washers, with 3/16" holeC Two, zinc plated lock washers, with 3/16"
holeC Two, zinc plated hex nuts to fit above boltsC Packaged in reclosable, poly bagC See Diagram 3 for examples.
Diagram 2
Diagram 1
Sign Plate
Sign Post
Installation Hardware
Profile
Diagram 3
Design and Placement Standards
Option A – Display in Urban AreasIf the main building beingidentified is within 50 feet ofyour front property line(same as line of electricpoles), the number plate canbe attached to the mainbuilding in such a way that itcan be easily seen from thehighway end of your lane.
Design: Strategic Marketing and Graphic DesignPhotos: Multimedia Services
Printing: Document Publishing Centre2011
11 911 06-30093
Option B – Preferred Rural Display
If the main building beingidentified is more than50 feet from your frontproperty line (same asline of electric poles),place the post and signcombination on the leftside of the driveway (asviewed from the road)which serves thebuilding being identified, with numbers facingthe road and, no closer to the highway thanyour front property line.
For further information,contact the 911 Administration
OfficeTel: (902) 894-0385Fax: (902) 368-6362
E-mail: [email protected]
aÉëáÖåI=aáëéä~ó=~åÇmä~ÅÉãÉåí=pí~åÇ~êÇë
ÑçêVNN=`áîáÅ=kìãÄÉê=páÖåë