department of mechanical engineering · suraj punj journal for multidisciplinary research 2394-2886...
TRANSCRIPT
Introduction :
2018 – 2019
(Even Sem)
V.S.B. Educational Trust was founded in the year 2000 by Mr. V.S. Balsamy, the founder and
correspondent of the V.S.B. Engineering College, with an interest in promoting, managing and
administrating educational institutions with high academic standards, discipline and to take up and help
other allied activities in the field of education. Under the Trust, V.S.B. Engineering College,Karur was
established in the year 2002 and V.S.B College of Engineering Technical Campus,Coimbatore in the year
2012.
About The Department: Welcome to the Department of Mechanical Engineering at V.S.B.
Engineering College, Karur. It occupies a prominent place in the records of the
college due to its good academic history. It offers 4-year B.E. Mechanical
Engineering course, the most sought-after one among all the courses, since the
Institution was founded in 2002. All our constituents are continually evaluating and
improving the departmental activities to fulfill our mission of excellence in
engineering education. In 2002, the department was started with 60 students; later,
the intake was increased to 120 and 180 subsequently and now it has been enhanced
to 240 because of the continuous good academic efforts and care taken by the
department.
1
Mr.V.S.Balsamy, B.Sc., L.L.B., a leading luminary, has 31 years of
bright standing in the field of law. He is the recipient of “Indira Gandhi
Sadhbavana Award” from Global Economic Council, New Delhi. He was
also honoured with “The Best Humanitarian Award” in 2005.VSB
Educational Trust was founded by him as the Founder-Trustee in the year
2000. He started V.S.B. Engineering College in Karur in the year 2002 and
V.S.B. College of Engineering-Technical Campus in Coimbatore in the year
of 2012. He, the Correspondent of VSB Group of Institutions, lays
emphasis on ‘Hard Work’. As he strongly believes that “HARD WORK IS
THE KEY TO SUCCESS”, it is conceived as the motto of the Institutions.
Vision : To produce quality Human Resources in Mechanical Engineering though excellence in Teaching
and innovative projects and thus to serve the society.
Mission : After the completion of course, Students are able
To impart quality education through the State-of-the-art facilities
To motivate the students to pursue Higher education
To promote research activities by encouraging the faculty and students to carry out projects.
To encourage the students to acquire entrepreneurial skills for the betterment of the Society.
2
Chairman’s Message :
Program Educational Outcomes : PEO1: To develop academic excellence and leadership qualities in students for their professional
career..
PEO2: To prepare the students for pursuing higher studies in the field of Mechanical Engineering
and interdisciplinary courses.
PEO3: Make the students create new design or be an entrepreneur with innovative ideas for the
development of social, technical and business outcomes
PROGRAM SPECIFIC OUTCOMES:
PSO1: Ability to apply the acquired Mechanical Engineering
knowledge for the advancement of society and self.
PSO2: Ability to implement the learned principles of Mechanical
Engineering to analyze, evaluate and create more advanced
mechanical systems or processes.
PSO3: Enable the students to design, analyze and evaluate the
Mechanical engineering components through innovative projects.
3
Teachers Journal Publications: S No Title of paper Name of the author/s Name of journal
ISBN/ISSN
number
1. A Study On Corrosion Behaviour Of Aluminium 6061
Alloy By Friction Stir Welding
Arun.B
Boobalan.P
Jhonson Babu.C
Ajith.M
International Journal of Research
(ijr) 2236-6124
2. Design And Numerical Analysis Of Innovative
Plowing Machine
R.Balamurugan
Nirmal Kannan.V
Rajesh S
International Journal of Research
(ijr) 2236-6124
3. Design Of Leak Proof Coupler Valve For Fuel Supply
In Engine Test Rig
V.Nirmal kannan
M.Vasantha kumar
S.Ram prasad
S.Vajahath rasool
Journal of Applied Science and
Computations (JASC) 1076-5131
4. Microcontroller Based Mini Fire Fight Robot
S. VinothKumar
G. Vijayanand
A. Marishwaran
S. Prabhakaran
Journal of Applied Science and
Computations (JASC) 1076-5131
5. Evaluation Of Eutectic Phase Change Materials
(PCM’s) For Building Free Cooling
Uthayakumar A
Yogaraj N
Harshavarthan A M
Charan kumar P
Journal of Applied Science and
Computations (JASC) 1076-5131
6. Solar Air Heater Studies in Dryer Applications
P.K.Manikanda Pirapu
M.Suresh
V.Nirmal kannan
G.Satish Pandian
International Journal of Research
(ijr) 2236-6124
4
S No Title of paper Name of the author/s Name of journal ISBN/ISSN
number
7. Effect Of Physco-Chemical Properties Of
Nanotube Blended In Biofuel
Mr.M.Dhanabal
Mr.S.Pragash
Mr.T.Subramaniaraja
Mr.K.Sudhakaran
International Journal of Research (ijr) 2236-6124
8. Process Improvement On Engine Test Bed By
Using Drive Adaptor Plate Fixture
V.Ragavan
M.Sangeetha
V.Nirmal kannan
M.Vasantha kumar
Journal of Applied Science and
Computations (JASC) 1076-5131
9. Design and fabrication of Stereo braking system
T.S Kiruba Shankar
R.Dhivagar
K.Ravikumar
V Nirmal Kannan
International Journal of Research (ijr) 2236-6124
10. Lean Production Enhancement Using Segregated
Sub-Assembly Conveyor System
N. Kapildev
P.Raju
V.Nirmal kannan
Journal of Applied Science and
Computations (JASC) 1076-5131
11. Automation Of Manual Work Piece Replacement
In Cnc Machine Using Robot
K.Ramachandran
V.Nirmal kannan
K.Jayaram
M.Guruprasath
International Journal of Research (ijr) 2236-6124
12.
Influence Of Ageing Behavior On Hardness Of
Squeeze Cast Al 7075 - 2.5% Ticp Using
Response Surface Methodology
P.Raju
Vijayanand .G
International Journal of Research (ijr) 2236-6124
13. Performance Evaluation of Solar Air Heater
P.K.Manikandapirapu
G.R.Gopinath
M. Suresh
Journal of Applied Science and
Computations (JASC) 1076-5131
5
S No Title of paper Name of the author/s Name of journal ISBN/ISSN
number
14.
Design And Fabrication Of Windmill By Using
Mercury And Water
T.S Kiruba Shankar
R.Dhivagar
V Nirmal Kannan
K.Ravikumar
Journal of Applied Science and
Computations (JASC) 1076-5131
15. Design Of Innovative Waste Plastics Disposal
Machine
H Rajarajasozhan
V Nirmal Kannan
M.Mohamed Abdul Hafeez
R.G.Hari
International Journal of Research (ijr) 2236-6124
16.
Automatic Traffic Controller For
Ambulance
Dr.R.Parthasarathi Suraj Punj Journal For
Multidisciplinary Research 2394-2886
17.
Design And Implementation With
Motorization In Igm Positioner
Dr.V Nirmal Kannan Suraj Punj Journal For
Multidisciplinary Research 2394-2886
18.
Fabrication Of Remote Controlled Forklift For
Stair Case Climbing
S.Ramprasad Suraj Punj Journal For
Multidisciplinary Research 2394-2886
19. Conversion Of Ambient Air Into Water Using
Refrigerant Unit P.A.Nigal Ashik
Suraj Punj Journal For
Multidisciplinary Research 2394-2886
20.
Power Generation In Suspension System By
Combination Electromagnet And Rack & Pinion
V.Ragavan Suraj Punj Journal For
Multidisciplinary Research 2394-2886
21.
Analysis Of Biodiesel Properties From Various Oil
Resources And Develop Relationships Among The
Properties
Arunraj Suraj Punj Journal For
Multidisciplinary Research 2394-2886
22. Characterization Of Natural Fibers -Review Arunraj, Raju Suraj Punj Journal For
Multidisciplinary Research 2394-2886
6
S No Title of paper Name of the
author/s Name of journal
ISBN/ISSN
number
23.
Thermal Investigation Of Al-Mos2, Al-Cu And Al-
Graphite
Alloys
Vijay Anand.G Suraj Punj Journal For Multidisciplinary
Research 2394-2886
24. Design And Fabrication Of Multipass Solar Air
Heater
P.K.Manikanda
Pirapu&
Dr.R.Parthasarathi
Suraj Punj Journal For Multidisciplinary
Research 2394-2886
25.
Thermoelectric Power Generation Using
Peltier
G.R.Gopinath Suraj Punj Journal For Multidisciplinary
Research 2394-2886
26.
Compatibility Analysis of VRF air conditioning
system for Green Buildings
S.Ramprasad Suraj Punj Journal For Multidisciplinary
Research 2394-2886
27.
Effect of Cutting fluid in Optimization of the
Process parameters by Taguchi technique
Arunraj Suraj Punj Journal For Multidisciplinary
Research 2394-2886
28.
Identification of Fuel Level in Digital Form in Fuel
Tank and Distance Calculation in Two Wheelers
K.Ramachandran Suraj Punj Journal For Multidisciplinary
Research 2394-2886
29.
Automatic Speed Reduction In Automobiles
For Averting Accidents
Dr.G.Satish Pandian Suraj Punj Journal For Multidisciplinary
Research 2394-2886
30. Accident Detection System For Vehicles P.A.Nigal Ashik Suraj Punj Journal For Multidisciplinary
Research 2394-2886
31.
Failure Mode Design Of Pinion Inner
Cone Bearing In Four Wheeler
Crown Assembly
Dr.V Nirmal Kannan Suraj Punj Journal For Multidisciplinary
Research 2394-2886
7
S No Title of paper Name of the author/s Name of journal ISBN/ISSN
number
32.
Design And Fabrication Of Clamping Device
To Overhaul Wagon Air Brake Cylinder
Dr.G.Satish Pandian Suraj Punj Journal For
Multidisciplinary Research 2394-2886
33.
Productivity Improvement Using Segregated
Sub Assembly Conveyor System
Dr.V Nirmal Kannan Suraj Punj Journal For
Multidisciplinary Research 2394-2886
34. Design and Numerical Analysis in impeller cover
planes by using special fixture Dr.R.Parthasarathi
ICCET 2018 Padmavathy Engineering
College 1314-3395
35. FEA models of 3D printing process for fabricating a
mini robot
Dr.V.Nirmal Kannan
Dr.R.Parthasarathi
International Journal of Scientific
Research 0976-2876
36. Productivity enhancement using automation of
removing refractory lining hydraulic mechanism
Dr.V.Nirmal Kannan
T.S.Kiruba Sankar
Dr.G.Satish Pandian
B.Arun
ICCET 1943-023X
37. Design and Numerical Analysis in impeller cover
planes by using special fixture P.Raju
ICCET 2018 Padmavathy Engineering
College 1314-3395
38.
Optimization of Machining Parameters for Burr
minimization in CNC turning of Materials using
Genetic Algorithm and Response Surface
Methodology
Dr.M.Mohamed Abdul
Hafeez
1st International Conference on
Innovations in
Thermal,Manufacturing,Structural and
Environmental Engineering
1662-7482
39. Optimization and Biodiesel production from
Prosopsis Juliflora oil with high free fatty acids Dr.P.Ganeshan
Journal of Applied Fluid Mechanics
Annexure-I 1735-3572
8
Name of students
undertaking field projects
/ internships
Company Name
Abarna.K.M TNPL, Karur
Abishek.R ATAL Coach, Karur
Abishek.R Kaashiv InfoTech, Chennai
Ajith.M TNPL, Karur
Ajith.M Rooby Tex, Coimbatore
Akash.P MM Brothers, Calicut
Allen Vijay.V.N MM Brothers, Calicut
Alwin Geo Johnson MM Brothers, Calicut
Angeal.B.L Ashok Leyland, Namakkal
Arun Sabrish.M Kaashiv InfoTech, Chennai
Arun.P Kaashiv InfoTech, Chennai
Bharath Atlas Processing Mills, Karur
Bharathi Kannan.P TNPL, Karur
Bharathvaj.K ACCL, Gummidipoondi
Boobalan.P Rooby Tex, Coimbatore
Boopathi.M GR Soft Tech, Trichy
Deepan.S TNPL, Karur
Dinesh Kumar.S TNPL, Karur
Dinesh Kumar.S Rooby Tex, Coimbatore
Dinesh.S Atlas Processing Mills, Karur
Elson Kurian Ezekiel GT Hyundai,Karur
Gokul Raj.T TNPL, Karur
Gowtham.P Rooby Tex, Coimbatore
Field Projects/Internships by Students:
Hanifathul Mubarak.M TNPL, Karur
Harsha Varthan.A.M Gem Pricision Tool (P) Ltd
Jeevanathan.R TNPL, Karur
Jegan.S TNPL, Karur
Jhonson Babu.C Rooby Tex, Coimbatore
Kalidash.P GR Soft Tech, Trichy
Karthick Raja.R TNPL, Karur
Kaviyarasan.R TNPL, Karur
Kirubhakaran.S ATAL Coach, Karur
Kishore.S ATAL Coach, Karur
Krishnakumar.V ATAL Coach, Karur
Lalithkumar.T ATAL Coach, Karur
Logesh Kumar.N TNPL, Karur
Mahendran.P Rooby Tex, Coimbatore
Makesh Kumar.N Rooby Tex, Coimbatore
Manikandan.P TNPL, Karur
Manjunath.S ATAL Coach, Karur
Manoj Prabhakar.K ATAL Coach, Karur
Marishwaran.A TNPL, Karur
Mathiraj.N ATAL Coach, Karur
Mohanram.P TNPL, Karur
Moulishwaran.R ATAL Coach, Karur
Muruganantham.S TNPL, Karur 9
Muthu Kumar.E TNPL, Karur
Nagarjun.K ATAL Coach, Karur
Naveen Kumar.C TNPL, Karur
Naveen Kumar.S Varnam Associates, Madurai
Naveen.K ATAL Coach, Karur
Naveen.R ATAL Coach, Karur
Nesa Kumar.M TNPL, Karur
Nesakumar.M ATAL Coach, Karur
Nirmal.R SAIL,Salem
Prabhakaran.S TNPL, Karur
Prabhakaran.V TNPL, Karur
Pradeep.S VKG Automobiles, Karur
Prakash.R Varnam Associates, Madurai
Prasana Kumar.N Varnam Associates, Madurai
Praveen Kumar.P Varnam Associates, Madurai
Pravin Kumar.M Appin Technology Lab, Coimbatore
Prem Kumar.E TNPL, Karur
Prem Kumar.J Varnam Associates, Madurai
Premkumar.S ATAL Coach, Karur
Ragul.K ATAL Coach, Karur
Ragul.P ATAL Coach, Karur
Ragul.V VKG Automobiles, Karur
Rajarajasozhan.M Caterpillar, Chennai
Sabarinathan.N TNPL, Karur
Sanjeevi.K Caterpillar, Chennai
Selva Kumar.S TNPL, Karur
SelvaKumar.E VKG Automobiles, Karur
Sharmatha.S TNPL, Karur
Sivachandran.M TNPL, Karur
Sivakumar.M TNPL, Karur
Sivaprakash.G Caterpillar, Chennai
Soundar.R TNPL, Karur
Sri Vignesh.S TNPL, Karur
Srinivasan Southern Railways, Chennai
Surentharan.B Caterpillar, Chennai
Suriya Prakash Mittulal Lalah & Sons, Tirupur
Tamilarasan.K VKG Automobiles, Karur
TamiZhaZhagen.K VKG Automobiles, Karur
Vellingiri R Southern Railways, Chennai
Venkatesh.S Ashok Leyland, Chennai
Vignesh narayan.R Ashok Leyland, Chennai
Vinoth.G Ashok Leyland, Chennai
Vivek.K Kaashiv InfoTech, Chennai
Vivek.K Abile Technologies, Coimbatore
Yuvaraj.S Ashok Leyland, Chennai
10
MOU’s with companies :
Name of the institution/ industry
Year of signing MoU Duration
List the actual activities under each
MoU year wise
Number of students participated under
MoUs
Tamil Motors 2018 3 Years Project, Inplant and internship training
8
ATAL Coach 2018 3 Years Project, Inplant and internship training
12
Veespa Technologies 2018 3 Years Project, Inplant and internship training
8
Awards for Staff :
Faculty Name Year of Award PAN Designation Name of the award
Mr.S.Ram Prasad 2019 AXWPR8495B Assistant Professor NPTEL - Elite Gold
Award
11
V.S.B. ENGINEERING COLLEGE
Department of Mechanical Engineering
Result Analysis of Anna University Examinations (May/June 2019)
Class / Semester: IV YEAR / VIII SEMESTER Batch: 2015-2019
Sl.No. Name of the
Subject Name of the faculty
member
No. of Students Appeared
No. of Students Absent
No. of Students passed
No. of Students
failed
Result withheld
Pass (%)
1
MG 6863 Engineering Economics
Dr. M.Mohamed Abdul Hafeez /
Mr.P.A.Nigal Ashik
162 1 161 1 0 99.38%
2
IE 6605 Production
Planning and Control
Dr. M.Mohamed Abdul Hafeez /
Mr.P.Raju / Mr.K.Ramachandhira
n
162 1 155 7 0 95.68%
3
ME 6016 Advanced I.C.
Engines
Mr.V.Ragavan / Mr.G.Vijayanand
162 1 155 7 0 95.68%
4 ME 6811
Project Work
Mr.K.Arunraj / Dr. M.Mohamed
Abdul Hafeez Mr.P.A.Nigal Ashik /
Dr.R.Parthasathi Dr.G.Sathish Pandian
/ Mr.V.Ragavan
163 Nil 163 0 0 100.00%
12
Best Result of the Year :
Symposium Conducted :
13
We ,the Department of Mechanical Engineering
students conducted the National level Technical
Symposium on February 21, 2019.
In that symposium , many college students were
took part and presented their knowledge to everyone .
Honorable Chief Guest : Mr.Raja
In that symposium there are 5 technical
events and 6 non technical events are
conducted.