department of defense guidance · imaginary surfaces separation requirements width grades &...

24
Department of Defense Guidance Harold V. Honey, P.E., PMP Federal Project Manager 100 Airside Drive Moon Township, PA 15108 412.269.2741 [email protected]

Upload: others

Post on 23-May-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Department of Defense GuidanceHarold V. Honey, P.E., PMP

Federal Project Manager

100 Airside DriveMoon Township, PA [email protected]

Page 2: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

▪ Why is DoD different from FAA?

Page 3: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

High Performance Aircraft

Page 4: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Austere Conditions

Page 5: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Stuff the Blows Up

Page 6: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

▪ USAF ▪ USA

▪ USN/USMC ▪ USCG

Service Specific Criteria

Page 7: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Whole Building Design Guidewww.wbdg.org/

Page 8: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Whole Building Design Guidewww.wbdg.org/

Page 9: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

What is on WBDG?

▪ Official repository for DoD Engineering Criteria

• UFC

• UFGS

▪ Interim and Service-Specific Guidance

• ETL

• EM

• ECB

• TSPWG

▪ Links to Service Engineering Organizations

• USACE

• NAVFAC

• AFCEC

Page 10: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Tri-Service Transportation Website

https://transportation.erdc.dren.mil/triservice/criteria.aspx

Page 11: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Criteria Definitions

▪ UFC = Unified Facilities Criteria

▪ ETL = Engineering Technical Letter

▪ UFGS = Unified Facilities Guide Specification

▪ EM = Engineer Manuals

▪ ECB = Engineering and Construction Bulletins

▪ TSPWG = Tri-Service Pavement Working Group

Page 12: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Primary Airfield Guidance

▪ UFC 3-260-01 Airfield and Heliport Planning

(2019) and Design (GEOMETRICS)

▪ UFC 3-260-02 Pavement Design for Airfields

(2001) (THICKNESS DESIGN & DETAILS)

Page 13: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

UFC 3-260-01 Airfield and Heliport Planning and Design

▪ Aviation Facility Planning

▪ Pavement Use Designations

▪ Imaginary Surfaces

▪ Separation Requirements

▪ Width

▪ Grades & Slopes

Page 14: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

UFC 3-260-02 Pavement Design for Airfields

▪ General Requirements (AF, Army, Navy/USMC)

▪ Traffic for Design

▪ Site Investigation

▪ Subgrades

▪ Base Courses

▪ Flexible Pavement

▪ Plain PCC

▪ Reinforced PCC

▪ Fibrous PCC

▪ Prestressed PCC

▪ Continuously Reinforced PCC

▪ Overlay/Inlay

▪ Frost Design

Page 15: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Other Pavement Related UFCs

▪ 3-250-01 Pavement Design for Roads and Parking

▪ 3-250-04 Standard Practice for Concrete Pavements

▪ 2-250-07 Standard Practice for Pavement Recycling

▪ 3-250-08FA Standard Practice for Sealing Joints and Cracks in Rigid and Flexible Pavement

▪ 3-250-01 Soil Stabilization for Pavements

▪ 3-260-04 Airfield and Heliport Marking (2018)

▪ 3-535-01 Visual Air Navigation Facilities

▪ 4-211-01 Aircraft Maintenance Hangars

▪ 4-211-02 Aircraft Corrosion Control and Paint Facilities

Page 16: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Air Force Engineering Technical Letters

▪ ETL 97-5 Proportioning Concrete Mixtures with Graded Aggregates for Rigid Airfield Pavements

▪ ETL 04-2 Standard Airfield Pavement Marking Schemes

▪ ETL 07-6 Risk Assessment Procedure for Recycling PCC Suffering from ASR in Airfield Pavement Structures

▪ ETL 08-2 Testing Protocol for Rigid Spall Repair

Materials

▪ ETL 14-2 Preventing and Repairing Concrete Deterioration under MV-22 and CV-22 Aircraft

What is going on with AF ETLS?

Page 17: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Tri-Service Pavement Working Group

▪ The Tri-Service Pavement Working Group develops manuals that supplement guidance found in other UFC, UFGS, DLA specifications and Service-specific publications. TSPWG is administered by HQUSACE, NAVFAC and AFCEC

▪ TSPWG M 3-270-01.08-2 Testing Protocol for Rapid Setting Rigid Repair Materials

▪ TSPWG TSC 13-1 Inspector’s Manual for Hot-Mixed Asphalt and Portland Cement Concrete Pavement Construction

▪ ***TSPWG M 3-250-04.97-05 Proportioning Concrete Mixtures with Graded Aggregates for Rigid Airfield Pavements***

Page 18: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Army Engineering Technical Letters

▪ ETL 1110-3-511 Army Airfield/Heliport Planning and Design Changes (Army-only mods to UFC 3-260-01)

▪ ETL 1110-3-510 Aviation Complex Planning and Design Criteria for Unmanned Aircraft Systems

Page 19: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Army Engineering and Construction Bulletins

▪ ECB 2014-20 Consolidated Quality Improvement ECB Requirements for Design and Construction of Airfield and Heliport Projects

• “All airfield project designs, regardless of funding type or scope, require TSC review.”

• “Airfield Designs will be in conformance with UFC 3-260-01, UFC 3-260-02 and UFC 3-535-01”

• “Unbracketed text on UFGSs are prohibited from being edited for USACE airfield projects without specific prior approval by the USACE Transportation System Center (TSC).”

Page 20: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

NAVFAC-Specific Criteria and Specifications

Page 21: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Unified Facility Guide Specifications

▪ 32 13 14.13 Concrete Pavement for Airfields and Other Heavy-Duty Pavement

▪ 32 11 23.23 Base Course Drainage Layer

▪ 32 11 20 [Base Course for Rigid][Subbase for Flexible] Paving

▪ 32 01 19 Field Molded Sealants for Sealing Joints in Rigid Pavements

▪ 32 13 73 Compression Joint Seals for Concrete Pavements

▪ 32 01 18.71 Grooving for Airfield Paving▪ 32 17 23 Pavement Markings

Page 22: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Design Software

▪ Tri-Service -- PCASE 2.09.05 (Sep 2015)

• Army, Air Force, Navy

• Pavement-transportation Computer Assisted Structural Engineering

• US Army CoE Product

• https://transportation.erdc.dren.mil/pcase/

Page 23: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Specification Software

▪ SpecsIntact v. 5.0

• DoD and NASA sponsored

• Allows for building project specs from UFGS

• http://specsintact.ksc.nasa.gov/Software/Software.shtml

Page 24: Department of Defense Guidance · Imaginary Surfaces Separation Requirements Width Grades & Slopes. UFC 3-260-02 Pavement Design for Airfields General Requirements (AF, Army, Navy/USMC)

Questions?

100 Airside DriveMoon Township, PA [email protected]