demo report - gulfincon€¦ · demo report client location application supervision date : hbk –...
TRANSCRIPT
DEMO REPORT
CLIENT LOCATION APPLICATION SUPERVISION DATE
: HBK – AFCON JV : New Port Project - Messaied : Concrete Surface Preparation for Water proofing. Require smooth surface : Mr. Sayyed : 24th June 2014
Current Scope of Work l
The project consists construction of five compartmented Water Tanks (Fresh water/ Sea water/ Sewage water) including pipe laying. All water tanks are required to be water proofed internally & externally. Besides the water tanks there are approximately 1500 nos’ of R/C pit supports for the pipes which are to be laid through. The surfaces of both pit supports & water tank require grinding for a smooth planed surface.
LOCATION : BUILDING 01 Building 01/ Compartment 2
Unprepared Concrete surface (Formwork Joint) Surface prepared using stone grinding wheel
Authorized Sole Agent in Qatar .
Gulf Incon W.L.L, P.O. Box 4076, Doha, Qatar T: +974 44683511 / +974 44996500 F: +974 44684065 / +974 44690057 E: [email protected]
Authorized Sole Agent in Qatar .
Gulf Incon W.L.L, P.O. Box 4076, Doha, Qatar T: +974 44683511 / +974 44996500 F: +974 44684065 / +974 44690057 E: [email protected]
Current Method of Surface Prepration Stone Cup Grinding wheel is used in conjunction with a normal 800 watts 4.5” inch Angle Grinder. Disadvantages of Current Method_______________________________________________________ Stone Cup Wheel Stone Cup Wheel is relatively very heavy & it requires a low speed high Torque, Higher wattage Angle grinder. When the low torque machine is used on a vertical surface the weight of the stone wheel constantly loads a lateral force which will eventually lead to,
• Damaged or offset spindle • Overload on gear wheels • Failure of electronics due to excessive torque load
The consumption rate of stone cup grinding wheel is considerably high. Angle Grinder 800 Watts 4.5” inch Angle Grinders are designed for steel & metal processing industry. Normal grinders are not designed to take in high volumes of Dust. Continuous flow of large quantities of dust through the cooling went will lead to,
• Poor air flow leads to over heating of machine • Over heating leads to failure of electronics, bearings & sealing washers etc…. • Excessive depositions of dust in greased gear, bearings & motor parts will cause high
abrasion increasing maintenance cost
Proposed Method______________________________________________________________________ Trelawny TCG 125 Concrete Hand Grinder (1400 Watts) with 5” inch Diamond Grinding Disc. 125mm Diamond Grinding Disc The rigid construction of segmented diamond disc contributes to,
• High material removal • Low consumption of Discs • Very light surface profile that improves adherence of water proofing primer coats • Larger circumference of 125mm covers more area increasing productivity
Trelawny TCG125 1400 Watts Concrete Hand Grinder 1400 Watts Trelawny Hand Grinder is specifically designed to withstand the hazardous environment created during concrete grinding. Higher wattage machine equipped with heat insulated motor part & optimized air flow ensures continuous working capacities in high ambient temperature. The advantages of TCG125 are,
• Optimized air flow for optimized cooling & reduced dust deposition • Reduced dust deposition increasing service life & reducing maintenance cost • Special D-grip handle allows proper handling with operator hand directly over gear housing • Restart Protection: Prevents restart of machine in the event of a power cut off during work
Authorized Sole Agent in Qatar .
Gulf Incon W.L.L, P.O. Box 4076, Doha, Qatar T: +974 44683511 / +974 44996500 F: +974 44684065 / +974 44690057 E: [email protected]
Demonstration & Analysis Two 2 Sq. mtr area was selected for both TCG 125 Diamond Grinding & 800 watts Angle grinder for Stone cup wheel grinding. The material height was measured of both materials for productivity analysis.
Stone cup wheel : Before Demo Tapered wall Height : 4.4 cm
125mm Diamond Disc : Before Demo Diamond Segment Height : 0.5 cm
Stone cup wheel : After Demo Tapered wall Height : 4.3 cm
125mm Diamond Disc : After Demo Diamond Segment Height : 0.5 cm
Authorized Sole Agent in Qatar .
Gulf Incon W.L.L, P.O. Box 4076, Doha, Qatar T: +974 44683511 / +974 44996500 F: +974 44684065 / +974 44690057 E: [email protected]
TCG 125 HAND GRINDER WITH 125MM DIAMOND GRINDING DISC
NORMAL GRINDER WITH STONE CUP WHEEL.
Authorized Sole Agent in Qatar .
Gulf Incon W.L.L, P.O. Box 4076, Doha, Qatar T: +974 44683511 / +974 44996500 F: +974 44684065 / +974 44690057 E: [email protected]
PRODUCTIVITY
TIME Stone Cup Wheel with Normal Grinder for 2 Sq mtr : 20 mnts Diamond Disc with Trelawny TCG 125 for 2 Sq. mtr : 8 mnts .
PRODUCTIVITY : 40% ACCESORY CONSUMPTION Stone Cup Wheel for 2 Sq mtr : 1.0 mm 125mm Diamond Gr. Wheel for 2 Sq.mtr : 0.0 mm .
PRODUCTIVITY : 100%
OPERATOR FEED BACK The operators for the Demonstration selected by Mr. Sayyed are all specialized in grinding works. The operators prefer the TCG125 with diamond gr. Wheel due to its, • Fast Material Removal rate • Easy Handling of the tool • Wider coverage area in a short time • Less Fatigue Hope that the above details of this demo report is sufficient for your kind perusal. For any clarifications please contact the undersigned. For Gulf Incon, Tuan Afaham Burah Field Sales Executive (Tools & Equipment) M T F E
: +974 33018291 : +974 44996510 : +974 44684065 : [email protected]