delta pl95h hydrostatic pipelayer

6
DELTA PL95H HYDROSTATIC PIPELAYER

Upload: delta-machinery

Post on 10-Mar-2016

216 views

Category:

Documents


4 download

DESCRIPTION

Delta PL95H Hydrostatic Pipelayer

TRANSCRIPT

Page 1: Delta PL95H Hydrostatic Pipelayer

STANDARD EQUIPMENT

• Antifreeze• Automatic boom stopper• Boom length 9 m• Hydraulic foot brakes• Front bumper• Hydraulically controlled counterweights• Drawbar• Fan blower• Filters, engine oil, full Áow and by-pass with replaceable elements• Filters transmission• Filter hydraulic system• Fuel fi lter• Guards Brake Fuel level Temp. oil reducer Temp. oil exchanger Press. Boost Filter tank Oil level Filter exchanger• Winches, two separate, for hook and boom• Certifi ed rollbar• Instrument panel light• Horn• Lights w/guards, 4 front an tractor, 2 rear• Master disconnect switch

The Netherlands

Delta Machinery

Haven M529, Port of MoerdijkMark S Clarkelaan 64761RK ZevenbergenThe Netherlands

Tel + 31 888 966 966Fax + 31 888 966 950

[email protected]

United Arabic emirates Ras Al Khaimah Machineries LLC Kharran Road, Al fi liyahRas Al KhaimahUnited Arab Emirates

Tel + 971 72289338Fax + 971 72289337

[email protected]

United Arabic emirates Global Pipeline Supplies FZCO 17553 Jebel Ali Free ZoneDubaiUnited Arab Emirates

Tel + 971 48833442Fax + 971 48833545

[email protected]

DELTA PL95H HYDROSTATIC PIPELAYER

DELTA PL95H HYDROSTATIC PIPELAYER

DELTA PL95HDELTA PL95HDELTAHYDROSTATIC PIPELAYER

Solid basic design with advanced technology

Dealer:

opmaak pl95h.indd 1 15-09-12 21:28

Page 2: Delta PL95H Hydrostatic Pipelayer

STANDARD EQUIPMENT

• Antifreeze• Automatic boom stopper• Boom length 9 m• Hydraulic foot brakes• Front bumper• Hydraulically controlled counterweights• Drawbar• Fan blower• Filters, engine oil, full Áow and by-pass with replaceable elements• Filters transmission• Filter hydraulic system• Fuel fi lter• Guards Brake Fuel level Temp. oil reducer Temp. oil exchanger Press. Boost Filter tank Oil level Filter exchanger• Winches, two separate, for hook and boom• Certifi ed rollbar• Instrument panel light• Horn• Lights w/guards, 4 front an tractor, 2 rear• Master disconnect switch

The Netherlands

Delta Machinery

Haven M529, Port of MoerdijkMark S Clarkelaan 64761RK ZevenbergenThe Netherlands

Tel + 31 888 966 966Fax + 31 888 966 950

[email protected]

United Arabic emirates Ras Al Khaimah Machineries LLC Kharran Road, Al fi liyahRas Al KhaimahUnited Arab Emirates

Tel + 971 72289338Fax + 971 72289337

[email protected]

United Arabic emirates Global Pipeline Supplies FZCO 17553 Jebel Ali Free ZoneDubaiUnited Arab Emirates

Tel + 971 48833442Fax + 971 48833545

[email protected]

DELTA PL95H HYDROSTATIC PIPELAYER

DELTA PL95H HYDROSTATIC PIPELAYER

DELTA PL95HDELTA PL95HDELTAHYDROSTATIC PIPELAYER

Solid basic design with advanced technology

Dealer:

opmaak pl95h.indd 1 15-09-12 21:28

Page 3: Delta PL95H Hydrostatic Pipelayer

ENGINE

Make and model Caterpillar C13 ACERTI-6, 4-Stroke-Cycle DieselBore 130.0 mm (5.12 in)Stroke 157.0 mm (6.18 in)Displacement 12.5 L (762.8 in3)Certifi cation rating 440HPAspiration TurbochargedAftercooled Compression Ratio 17.3:1Rotation (from fl ywheel end) CounterclockwiseWeight, Net Dry (approximate kg, lb) 939 kg, 2070 lb

LIFTING CAPACITY

Maximum lift 95.000 kg

OPERATING WEIGHT

56.800 kg

CONTROL SYSTEM

Electronic governing, PTO speed control, Programmable ratings, Cold mode start strategy, Automatic altitude compensation, Power compensation for fuel temperature, Programmable low and high idle and total engine limit, Electronic diagnostics and fault logging, Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4

TRANSMISSION

Main pump: : 2 axial piston pumpsBrand : Sauer DanfossMax fl ow : 286.5 lit/minMain pressure : 420 barMax pressure : 500 barService pump : tandem gear typeMain pump : axial piston type: hydrostatic close circuitMax fl ow : 286,5l/min x 2”Final drive : separate oil circuit with oil cooler and replacement fi lter.

BOOM

Type : Std. 9 m A frame welded box square section Diameter wire rope : 19 mm - 3/4 inMinimum breaking strength rope : 305 KN - 68,58 lb Number of Hook lines : 6Number of Boom lines : 5

ADJUSTABLE COUNTERWEIGHTS

QD-CS: quick-disconnected counterweight system. For the possibility of disassembly in a short time(all the counterweight pack.)Removable counterweight : 4 unit 2600 kg eachTotal weight extendable : 10.400 kg

WINCH Hook Boom

Winches Two Braden dual brakeDrum diameter 270 mm 330 mmFlange diameter 508 mm 546 mmDrum length 343 mm 500 mmHooklines 8

HYDRAULIC WINCHES

Type : Hydraulic controlled drums (reversible.) Driven by variable fl ow hydraulic pump and control valve block in open circuit.Final drive : Compact hydrostatic drive unit, two-stage planetary gearBrakes : Integrated multiple disk brakes, spring applied hydraulic releaseHydr. Motors : Rexroth

TRACK FRAME

8 roller track frame with sealed and lubricated Caterpillar D9 type chain Number of bottom rollers : 8Number of carrying rollers : 2Gauge : 2.6 m - 8.5 ftStandard shoes width : 32 in

ELECTRIC SYSTEM

Operating voltage : 24 VCapacity (total) : 220 AhStarter capacity : 7.5 KwAlternator : 55 A

FLUID CAPACITIES

Fuel tank : 360 litersHydraulic system circuit : 410 liters Cooling system : 60 litersEngine oil : 40 litersFinal drive each : 24 liters

CONTROLS

Joystick control winchesJoystick counterweightsJoystick controlled tracks

WINCH SPECIFICATION

Main Pump Type : Linde HPR 105-02 axial piston variable displacement pumpValvesMax capacity : 286 lit/minWorking pressure : 420 barControl TypePilot units for remote control of winch motors and counter-weightProgressive and sensitive operations Service PumpType : Gear pumpMax capacity : 10 liters.min - 2.6 U.S. gal/min Working pressure : 30 bar - 435 p.s.i.

OPTIONS

• Delta LMS Safety System• E-rops enclosed cab with heather and/or Air conditioning.• Cold weather kit• Rear winch• GPS telemetry system

WARRANTY

1 Year Limited Warranty

DELTA PL95H HYDROSTATIC PIPELAYER

36405053

6433

22703650

4454

5727

3090

3646

3646

8000

9880

1399

1279

1159

1038

415

380

344

308

358

351

344

337

1200 1400 1600 1800 2000 2200

EngineTorque lb•ft

EnginePower bhp

BSFClb/bhp-hr

1009590

80

70

60

504540

30

20

10

0

220

200

180

160

140

120

100

80

60

40

20

1

4 6 8 10 12 14 16 18 20 22 24

1.5 2 3 3.5 4 4.5 5 5.5 6 6.5 72.5

Working RangeISO 8813

lb x1000

kg x1000

M

Ft

Lifti

ng C

apac

ity

Boom Overhang

Max. Lift Capacity S.A.E. J743B

Max. Load Capacity ISO 8813

1 Caterpillar C13 ACERT Tier IIIA engine

440HP (made in USA)

2 Caterpillar Messenger Display

(made in USA)

3 Caterpillar D9 fi nal drive

(made in USA)

4 Caterpilar D9 Chain (made in USA)

5 Paccar Braden winches

(made in USA)

6 Rexroth hydraulic motors for winches

(made in Germany)

7 Sauer Danfoss Hydraulic pumps for

hydrostatic transmission

(made in Germany)

8 Sauer Danfoss Hydraulic

motors for hydrostatic transmission

(made in Germany)

9 Joystick controlled

Hydrostatic transmission

10 Joystick controlled hydraulic winches

11 LMI safety system on Request

(made in Netherlands)

CE marked

1 2 3

4 5 6

7 8 9

10 11

DisclaimerThe information contained in this brochure is intend to be of a general use only. Delta may at any time for technical or other necessary reasons modify any of the specifi cations mentioned. Illustrations do not necessarily show the product in standard conditions. The dimensions, weights and capacities shown are approximate only and are subjects to variations within normal manufacturing techniques.

opmaak pl95h.indd 2 15-09-12 21:28

Page 4: Delta PL95H Hydrostatic Pipelayer

ENGINE

Make and model Caterpillar C13 ACERTI-6, 4-Stroke-Cycle DieselBore 130.0 mm (5.12 in)Stroke 157.0 mm (6.18 in)Displacement 12.5 L (762.8 in3)Certifi cation rating 440HPAspiration TurbochargedAftercooled Compression Ratio 17.3:1Rotation (from fl ywheel end) CounterclockwiseWeight, Net Dry (approximate kg, lb) 939 kg, 2070 lb

LIFTING CAPACITY

Maximum lift 95.000 kg

OPERATING WEIGHT

56.800 kg

CONTROL SYSTEM

Electronic governing, PTO speed control, Programmable ratings, Cold mode start strategy, Automatic altitude compensation, Power compensation for fuel temperature, Programmable low and high idle and total engine limit, Electronic diagnostics and fault logging, Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4

TRANSMISSION

Main pump: : 2 axial piston pumpsBrand : Sauer DanfossMax fl ow : 286.5 lit/minMain pressure : 420 barMax pressure : 500 barService pump : tandem gear typeMain pump : axial piston type: hydrostatic close circuitMax fl ow : 286,5l/min x 2”Final drive : separate oil circuit with oil cooler and replacement fi lter.

BOOM

Type : Std. 9 m A frame welded box square section Diameter wire rope : 19 mm - 3/4 inMinimum breaking strength rope : 305 KN - 68,58 lb Number of Hook lines : 6Number of Boom lines : 5

ADJUSTABLE COUNTERWEIGHTS

QD-CS: quick-disconnected counterweight system. For the possibility of disassembly in a short time(all the counterweight pack.)Removable counterweight : 4 unit 2600 kg eachTotal weight extendable : 10.400 kg

WINCH Hook Boom

Winches Two Braden dual brakeDrum diameter 270 mm 330 mmFlange diameter 508 mm 546 mmDrum length 343 mm 500 mmHooklines 8

HYDRAULIC WINCHES

Type : Hydraulic controlled drums (reversible.) Driven by variable fl ow hydraulic pump and control valve block in open circuit.Final drive : Compact hydrostatic drive unit, two-stage planetary gearBrakes : Integrated multiple disk brakes, spring applied hydraulic releaseHydr. Motors : Rexroth

TRACK FRAME

8 roller track frame with sealed and lubricated Caterpillar D9 type chain Number of bottom rollers : 8Number of carrying rollers : 2Gauge : 2.6 m - 8.5 ftStandard shoes width : 32 in

ELECTRIC SYSTEM

Operating voltage : 24 VCapacity (total) : 220 AhStarter capacity : 7.5 KwAlternator : 55 A

FLUID CAPACITIES

Fuel tank : 360 litersHydraulic system circuit : 410 liters Cooling system : 60 litersEngine oil : 40 litersFinal drive each : 24 liters

CONTROLS

Joystick control winchesJoystick counterweightsJoystick controlled tracks

WINCH SPECIFICATION

Main Pump Type : Linde HPR 105-02 axial piston variable displacement pumpValvesMax capacity : 286 lit/minWorking pressure : 420 barControl TypePilot units for remote control of winch motors and counter-weightProgressive and sensitive operations Service PumpType : Gear pumpMax capacity : 10 liters.min - 2.6 U.S. gal/min Working pressure : 30 bar - 435 p.s.i.

OPTIONS

• Delta LMS Safety System• E-rops enclosed cab with heather and/or Air conditioning.• Cold weather kit• Rear winch• GPS telemetry system

WARRANTY

1 Year Limited Warranty

DELTA PL95H HYDROSTATIC PIPELAYER

36405053

6433

22703650

4454

5727

3090

3646

3646

8000

9880

1399

1279

1159

1038

415

380

344

308

358

351

344

337

1200 1400 1600 1800 2000 2200

EngineTorque lb•ft

EnginePower bhp

BSFClb/bhp-hr

1009590

80

70

60

504540

30

20

10

0

220

200

180

160

140

120

100

80

60

40

20

1

4 6 8 10 12 14 16 18 20 22 24

1.5 2 3 3.5 4 4.5 5 5.5 6 6.5 72.5

Working RangeISO 8813

lb x1000

kg x1000

M

Ft

Lifti

ng C

apac

ity

Boom Overhang

Max. Lift Capacity S.A.E. J743B

Max. Load Capacity ISO 8813

1 Caterpillar C13 ACERT Tier IIIA engine

440HP (made in USA)

2 Caterpillar Messenger Display

(made in USA)

3 Caterpillar D9 fi nal drive

(made in USA)

4 Caterpilar D9 Chain (made in USA)

5 Paccar Braden winches

(made in USA)

6 Rexroth hydraulic motors for winches

(made in Germany)

7 Sauer Danfoss Hydraulic pumps for

hydrostatic transmission

(made in Germany)

8 Sauer Danfoss Hydraulic

motors for hydrostatic transmission

(made in Germany)

9 Joystick controlled

Hydrostatic transmission

10 Joystick controlled hydraulic winches

11 LMI safety system on Request

(made in Netherlands)

CE marked

1 2 3

4 5 6

7 8 9

10 11

DisclaimerThe information contained in this brochure is intend to be of a general use only. Delta may at any time for technical or other necessary reasons modify any of the specifi cations mentioned. Illustrations do not necessarily show the product in standard conditions. The dimensions, weights and capacities shown are approximate only and are subjects to variations within normal manufacturing techniques.

opmaak pl95h.indd 2 15-09-12 21:28

Page 5: Delta PL95H Hydrostatic Pipelayer

ENGINE

Make and model Caterpillar C13 ACERTI-6, 4-Stroke-Cycle DieselBore 130.0 mm (5.12 in)Stroke 157.0 mm (6.18 in)Displacement 12.5 L (762.8 in3)Certifi cation rating 440HPAspiration TurbochargedAftercooled Compression Ratio 17.3:1Rotation (from fl ywheel end) CounterclockwiseWeight, Net Dry (approximate kg, lb) 939 kg, 2070 lb

LIFTING CAPACITY

Maximum lift 95.000 kg

OPERATING WEIGHT

56.800 kg

CONTROL SYSTEM

Electronic governing, PTO speed control, Programmable ratings, Cold mode start strategy, Automatic altitude compensation, Power compensation for fuel temperature, Programmable low and high idle and total engine limit, Electronic diagnostics and fault logging, Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4

TRANSMISSION

Main pump: : 2 axial piston pumpsBrand : Sauer DanfossMax fl ow : 286.5 lit/minMain pressure : 420 barMax pressure : 500 barService pump : tandem gear typeMain pump : axial piston type: hydrostatic close circuitMax fl ow : 286,5l/min x 2”Final drive : separate oil circuit with oil cooler and replacement fi lter.

BOOM

Type : Std. 9 m A frame welded box square section Diameter wire rope : 19 mm - 3/4 inMinimum breaking strength rope : 305 KN - 68,58 lb Number of Hook lines : 6Number of Boom lines : 5

ADJUSTABLE COUNTERWEIGHTS

QD-CS: quick-disconnected counterweight system. For the possibility of disassembly in a short time(all the counterweight pack.)Removable counterweight : 4 unit 2600 kg eachTotal weight extendable : 10.400 kg

WINCH Hook Boom

Winches Two Braden dual brakeDrum diameter 270 mm 330 mmFlange diameter 508 mm 546 mmDrum length 343 mm 500 mmHooklines 8

HYDRAULIC WINCHES

Type : Hydraulic controlled drums (reversible.) Driven by variable fl ow hydraulic pump and control valve block in open circuit.Final drive : Compact hydrostatic drive unit, two-stage planetary gearBrakes : Integrated multiple disk brakes, spring applied hydraulic releaseHydr. Motors : Rexroth

TRACK FRAME

8 roller track frame with sealed and lubricated Caterpillar D9 type chain Number of bottom rollers : 8Number of carrying rollers : 2Gauge : 2.6 m - 8.5 ftStandard shoes width : 32 in

ELECTRIC SYSTEM

Operating voltage : 24 VCapacity (total) : 220 AhStarter capacity : 7.5 KwAlternator : 55 A

FLUID CAPACITIES

Fuel tank : 360 litersHydraulic system circuit : 410 liters Cooling system : 60 litersEngine oil : 40 litersFinal drive each : 24 liters

CONTROLS

Joystick control winchesJoystick counterweightsJoystick controlled tracks

WINCH SPECIFICATION

Main Pump Type : Linde HPR 105-02 axial piston variable displacement pumpValvesMax capacity : 286 lit/minWorking pressure : 420 barControl TypePilot units for remote control of winch motors and counter-weightProgressive and sensitive operations Service PumpType : Gear pumpMax capacity : 10 liters.min - 2.6 U.S. gal/min Working pressure : 30 bar - 435 p.s.i.

OPTIONS

• Delta LMS Safety System• E-rops enclosed cab with heather and/or Air conditioning.• Cold weather kit• Rear winch• GPS telemetry system

WARRANTY

1 Year Limited Warranty

DELTA PL95H HYDROSTATIC PIPELAYER

36405053

6433

22703650

4454

5727

3090

3646

3646

8000

9880

1399

1279

1159

1038

415

380

344

308

358

351

344

337

1200 1400 1600 1800 2000 2200

EngineTorque lb•ft

EnginePower bhp

BSFClb/bhp-hr

1009590

80

70

60

504540

30

20

10

0

220

200

180

160

140

120

100

80

60

40

20

1

4 6 8 10 12 14 16 18 20 22 24

1.5 2 3 3.5 4 4.5 5 5.5 6 6.5 72.5

Working RangeISO 8813

lb x1000

kg x1000

M

Ft

Lifti

ng C

apac

ity

Boom Overhang

Max. Lift Capacity S.A.E. J743B

Max. Load Capacity ISO 8813

1 Caterpillar C13 ACERT Tier IIIA engine

440HP (made in USA)

2 Caterpillar Messenger Display

(made in USA)

3 Caterpillar D9 fi nal drive

(made in USA)

4 Caterpilar D9 Chain (made in USA)

5 Paccar Braden winches

(made in USA)

6 Rexroth hydraulic motors for winches

(made in Germany)

7 Sauer Danfoss Hydraulic pumps for

hydrostatic transmission

(made in Germany)

8 Sauer Danfoss Hydraulic

motors for hydrostatic transmission

(made in Germany)

9 Joystick controlled

Hydrostatic transmission

10 Joystick controlled hydraulic winches

11 LMI safety system on Request

(made in Netherlands)

CE marked

1 2 3

4 5 6

7 8 9

10 11

DisclaimerThe information contained in this brochure is intend to be of a general use only. Delta may at any time for technical or other necessary reasons modify any of the specifi cations mentioned. Illustrations do not necessarily show the product in standard conditions. The dimensions, weights and capacities shown are approximate only and are subjects to variations within normal manufacturing techniques.

opmaak pl95h.indd 2 15-09-12 21:28

Page 6: Delta PL95H Hydrostatic Pipelayer

STANDARD EQUIPMENT

• Antifreeze• Automatic boom stopper• Boom length 9 m• Hydraulic foot brakes• Front bumper• Hydraulically controlled counterweights• Drawbar• Fan blower• Filters, engine oil, full Áow and by-pass with replaceable elements• Filters transmission• Filter hydraulic system• Fuel fi lter• Guards Brake Fuel level Temp. oil reducer Temp. oil exchanger Press. Boost Filter tank Oil level Filter exchanger• Winches, two separate, for hook and boom• Certifi ed rollbar• Instrument panel light• Horn• Lights w/guards, 4 front an tractor, 2 rear• Master disconnect switch

The Netherlands

Delta Machinery

Haven M529, Port of MoerdijkMark S Clarkelaan 64761RK ZevenbergenThe Netherlands

Tel + 31 888 966 966Fax + 31 888 966 950

[email protected]

United Arabic emirates Ras Al Khaimah Machineries LLC Kharran Road, Al fi liyahRas Al KhaimahUnited Arab Emirates

Tel + 971 72289338Fax + 971 72289337

[email protected]

United Arabic emirates Global Pipeline Supplies FZCO 17553 Jebel Ali Free ZoneDubaiUnited Arab Emirates

Tel + 971 48833442Fax + 971 48833545

[email protected]

DELTA PL95H HYDROSTATIC PIPELAYER

DELTA PL95H HYDROSTATIC PIPELAYER

DELTA PL95HDELTA PL95HDELTAHYDROSTATIC PIPELAYER

Solid basic design with advanced technology

Dealer:

opmaak pl95h.indd 1 15-09-12 21:28