8/13/2019 Dell 2850 RAID

1/7

Step-by-Step Guide to Configure Hardware

RAID on DELL servers with Screenshots

Expanding the capacity of a server by adding newdisk drives is a typical activity for administrator. In this article, let us review how to add two new

disk drives to the DELL server and create RAID 1 using Dell PowerEdge Expandable RAIDController PERC configuration utility. This tool is also called as PERC/CERC Bios

Configuration Utility.

If you are using the latest DELL Servers, please refer to the article that explainshow to createRAID on PERC 6/i Integrated BIOS Configuration Utility.

1. Launch PERC/CERC BIOS Configuration Utility.

Insert the two new disk drives onto the empty slots available on the server and reboot. During

the system startup, press Ctrl+M to launch the PowerEdge Expandable RAID Controller BIOSConfiguration Utility.

2. Go to Configure -> View/Add Configuration

Using the arrow keys, select the Configure option from the main menu and View/Add

Configuration option from the Configure menu as shown below.

http://www.thegeekstuff.com/2009/05/dell-tutorial-create-raid-using-perc-6i-integrated-bios-configuration-utility/http://www.thegeekstuff.com/2009/05/dell-tutorial-create-raid-using-perc-6i-integrated-bios-configuration-utility/http://www.thegeekstuff.com/2009/05/dell-tutorial-create-raid-using-perc-6i-integrated-bios-configuration-utility/http://www.thegeekstuff.com/2009/05/dell-tutorial-create-raid-using-perc-6i-integrated-bios-configuration-utility/http://www.thegeekstuff.com/wp-content/uploads/2008/07/1-ctrl-m-during-startup.jpghttp://www.thegeekstuff.com/2009/05/dell-tutorial-create-raid-using-perc-6i-integrated-bios-configuration-utility/http://www.thegeekstuff.com/2009/05/dell-tutorial-create-raid-using-perc-6i-integrated-bios-configuration-utility/

8/13/2019 Dell 2850 RAID

2/7

3. Status of the new disk drives

The View/Add Configuration menu item, will display all disk drives on the system along with

status. In the following example, 4 disk drives are online and already configured. The 2 newdrives display the READY status as shown below. The text next to ONLINE indicates the logical

volume number and the disk# inside the logical drive. For e.g. A01-00 indicates logical volume

1 and disk#0. A01-01 indicates logical volume 2 and disk#1.

http://www.thegeekstuff.com/wp-content/uploads/2008/07/2-view-add-configuration-menu.jpg

8/13/2019 Dell 2850 RAID

3/7

4. Make the disk drives online

Use arrow key and select the first drive with READY status and press space bar, whichwill change the status from READY to ONLINE and add A02-00 next to it. A02-00 will

be blinking at this stage.

The cursor will automatically move to the next available drive with READY status.Press space bar, which will change the status from READY to ONLINE and add A02-01

next to it. Both A02-00 and A02-01 will be blinking at this stage.

Press Enter to indicate the array selection is complete. Both A02-00 and A02-01 will stopblinking.

http://www.thegeekstuff.com/wp-content/uploads/2008/07/3-physical-drive-ready-status.jpg

8/13/2019 Dell 2850 RAID

4/7

5. Configure the disk drives

Press F10 to continue the configuration of two selected disk drives. This will display the Array

configuration screen as shown below. The array number A02 number that got assigned for the

new disk drives from the previous step, is displayed here.

http://www.thegeekstuff.com/wp-content/uploads/2008/07/4-physical-drive-online-status.jpg

8/13/2019 Dell 2850 RAID

5/7

Press space bar which will display the Span-1 message in the A02 text area as shownbelow.

Press F10 to continue the configuration to the next step.

http://www.thegeekstuff.com/wp-content/uploads/2008/07/5-f10-select-configurable-array.jpg

8/13/2019 Dell 2850 RAID

6/7

6. Select RAID Level.

Pressing F10 from the above screen, will display the RAID configuration screen as shown below.

Use the arrow keys to select RAID 1 and press enter. Use arrow keys to scroll down, select Accept and press enter to save the configurations.

http://www.thegeekstuff.com/wp-content/uploads/2008/07/7-choose-raid-level1.jpghttp://www.thegeekstuff.com/wp-content/uploads/2008/07/6-space-bar-span-1.jpg

8/13/2019 Dell 2850 RAID

7/7

The advanced menu in the above screen has the following options. I suggest that you dont

change this and leave it to the default values.

Stripe Size: 2KB, 4KB, 8KB, 16KB, 32KB, 64KB (default value) or 128 KB. Write Policy: WRBACK (default value) or WRTHRU

Read Policy: NO_READAHEAD, READAHEAD or ADAPTIVE (default value) Cache Policy: Cached IO or Direct IO (default value)

After saving the configuration, reboot the system. Logical Volume 02 is now configured asRAID1 using the two new disk drives and ready for use.

Prepared By: Muhammad Umer (Systems Administrator)