delivery system products - svi international

SVI International, Inc.155 Harvestore Drive • DeKalb, IL 60115

www.sviinternational.com

800-321-8173815-748-0200

B A L T I M O R E • C H I C A G O • L O S A N G E L E S

Extensive Product Line for anything in your shop including Air Delivery Products!

Automotive Shop Equipment | Delivery System ProductsIncluding Popular Auto Lift Air Valves & Air Cylinders

Air Line Tubing & Push-On Fittings

Table of Contents Polyethylene Tubing ........................................... 2Nylon 12 Tubing.................................................. 3Polyurethane Tubing........................................... 4Polypropylene Tubing ......................................... 5Standard Push-On Fittings (NPT)................... 6–7Metric Push-On Fittings (BSPT) ................... 8–10DOT Push-On Fittings .......................................11Air Release Valves / Air Cylinders .............. 12–14Recoil Air Hoses ............................................... 14Hose Reels & Hose Stops ................................ 15Vibration Dampening Pads for Compressors ... 15

APPLICATIONSAuto Lift Air Lock SystemsAuto & Truck Tire ChangersAir ToolsLube LinesDrain LinesElectrical JacketingLaboratoriesInstrumentationSpray Supply LinesMetering PumpsFood & BeverageAgricultural LinesChemical & Solvent LinesRefrigerationVacuum LinesCoolantsAir Brake Systems

All names, numbers, symbols and descriptions are used for reference purposes only. It is not implied that any part listed is the product of these manufacturers; however, some parts may be the actual product of these manufacturers.

Page

2DSP7900 - 9.13.18

TOLL FREE:800-321-8173

Air Line Tubing and Push-On Fittingsentire contents copyright © 2018 SVI International, Inc.

POPULARCHOICE

POPULARCHOICE

Polyethylene Air Line Tubing Polyethylene tubing is the lowest cost tubing in the SVI product line that you can use for air line replacement in shops on a tight budget. Polyethylene is highly resistant to stress cracks and affords the working and burst pressures for most shop service equipment applications. SVI supplies this tubing in both standard and metric sizes. Polyethylene tubing is stocked in black but other colors are available upon request. SVI conveniently supplies and stocks black by-the-foot or you may order bulk rolls in lengths up to 1000 feet. This means you can purchase exactly what you need for a specific job or in larger quantities to keep your service trucks stocked.

Uses:•Auto Lift Air Lock Systems•Air Tools•Drain Lines•Electrical Jacketing•Food & Beverage•Laboratories• Instrumentation

Polyethylene at a Glance:•Low cost•Lightweight and flexible•Resistant to stress cracking•Temperature range -50° F to +140° F•Use with brass or plastic resin fittings•Chemical Resistant•Color: Black (or specify color)

Other color choices•Black = BK•Blue = BL•Green = GR•Natural = NA•Red = RD•White = WH•Yellow = YL

Polyethylene

Stock your truck today.

METRIC Polyethylene Tubing

Use with METRIC Push-On Fittings found on pages 10–12

SVI Part # O.D. I.D. Wall W.P. (psi) 3:1 (mm) (mm) Thickness @70° F Burst Pressure

BH-7901N-100BK 4.0 2.5 .75 180 540BH-7901O-100BK 6.0 4.0 1.0 150 450BH-7901P-100BK 8.0 6.0 1.0 150 450BH-7901Q-100BK 10.0 8.0 1.0 125 375BH-7901R-100BK 12.0 9.0 1.5 100 300

SVI Part # O.D. I.D. Wall W.P. (psi) 3:1 Length (in) (in) Thickness @70° F Burst Pressure of RollBH-7901D-100BK .250 .170 .040 150 450 100’ RollBH-7901D-250BK .250 .170 .040 150 450 250’ RollBH-7901D-500BK .250 .170 .040 150 450 500’ RollBH-7901D-1000BK .250 .170 .040 150 450 1000’ RollBH-7901D-001BK .250 .170 .040 150 450 By the Foot

BH-7901F-100BK .375 .250 .062 150 450 100’ RollBH-7901F-250BK .375 .250 .062 150 450 250’ RollBH-7901F-500BK .375 .250 .062 150 450 500’ RollBH-7901F-1000BK .375 .250 .062 150 450 1000’ RollBH-7901F-001BK .375 .250 .062 150 450 By the Foot

Use with STANDARD Push-On Fittings found on pages 6–7

STANDARD Polyethylene Tubing

Length Choices

Black is standard, or specify color.

-100BK = 100’ roll-250BK = 250’ roll-500BK = 500’ roll-1000BK = 1000’ roll-001BK = by the foot

DSP7900 - 9.13.18All names, numbers, symbols and descriptions are used for reference purposes only. It is not implied that any part listed is the product of these manufacturers; however, some parts may be the actual product of these manufacturers.

Page

3

TOLL FREE:800-321-8173


POPULARCHOICE

POPULARCHOICE

Nylon 12 Air Line Tubing

Nylon 12 at a Glance: Uses:•Auto Lift Air Lock Systems•Auto & Truck Tire Changers•Air Tools•Lube Lines•Drain Lines•Paint Supply Lines•Refrigeration•Laboratories• Instrumentation

Nylon 12 tubing is recognized as the industry standard for applications where higher working pressures and higher heat and/or chemical resistance are required. It is ideal for outdoor applications because of its superior stress crack resistance making it the perfect choice for air lock systems on lifts used outdoors. SVI supplies this tubing in both standard and metric sizes. Nylon 12 is stocked in black but other colors are available upon request. SVI conveniently supplies and stocks black by-the-foot in standard sizes or you may order bulk rolls in lengths up to 1000 feet. Metric Nylon 12 is sold by-the foot and in bulk lengths of 82’ (25 meters) and 328’ (100 meters). This means you can purchase exactly what you need for a specific job or in larger quantities to keep your service trucks stocked.

•Strong•Higher working pressures•Lightweight and flexible•Resistant to stress cracking•Excellent outdoor capabilities•Temperature range -60° F to +200° F•Use with brass or plastic resin fittings•Color: Black (or specify color)

STANDARD Nylon 12 TubingSVI Part # O.D. I.D. Wall W.P. (psi) 3:1 Length

(in) (in) Thickness @70° F Burst Pressure of RollBH-7902D-100BK .250 .180 .035 290 870 100’ RollBH-7902D-250BK .250 .180 .035 290 870 250’ RollBH-7902D-500BK .250 .180 .035 290 870 500’ RollBH-7902D-1000BK .250 .180 .035 290 870 1000’ RollBH-7902D-001BK .250 .180 .035 290 870 By the Foot

BH-7902F-100BK .375 .275 .050 250 750 100’ RollBH-7902F-250BK .375 .275 .050 250 750 250’ Roll BH-7902F-500BK .375 .275 .050 250 750 500’ RollBH-7902F-1000BK .375 .275 .050 250 750 1000’ RollBH-7902F-001BK .375 .275 .050 250 750 By the Foot

METRIC Nylon 12 TubingSVI Part # O.D. I.D. Wall W.P. (psi) 3:1

(mm) (mm) Thickness @70° F Burst PressureBH-7902N-001BK 4.0 2.3 .85 350 1050BH-7902O-001BK 6.0 4.0 1.0 340 1020BH-7902P-001BK 8.0 6.0 1.0 250 750BH-7902Q-001BK 10.0 8.0 1.0 225 675BH-7902R-001BK 12.0 10.0 1.0 200 600BH-7902S-001BK 14.0 12.0 2.0 175 525

Other color choices•Black = BK•Blue = BL•Green = GR•Natural = NA•Red = RD•White = WH•Yellow = YL

Length choicesfor Standard sizes-100BK = 100’ roll-250BK = 250’ roll-500BK = 500’ roll-1000BK = 1000’ roll-001BK = by the foot

for Metric sizes- 082BK = 82’ roll- 328BK = 328’ roll- 001BK = by the foot


Use with STANDARD Push on Fittings found on pages 6–7

Nylon 12


Page

4DSP7900 - 9.13.18

TOLL FREE:800-321-8173


Polyurethane Air Line Tubing

Polyurethane at a glance•Heat & Cold Resistant•Temperature range -40° F to +160° F•Kink resistant•Strong•Lightweight and very flexible•Use with brass or plastic resin fittings•Meets NSF Requirements•Color: Black (or specify color)

Uses:•Auto Lift Air Lock Systems•Air Tools•Lubrication Lines•Painting Systems•Hydraulic Lines•Metering Pumps•Food & Beverage•Laboratories• Instrumentation•Agricultural lines

Polyurethane tubing is made from the highest quality raw materials available. Polyurethane tubing is strong and very flexible and affords superior kink resistance and low temperature flexibility to other types of tubing. It is ether-based which makes it resistant to hydrolysis, fungus and weathering. In addition to its industrial uses it meets NSF (National Sanitation Foundation) requirements. SVI supplies this tubing in both standard and metric sizes. Polyurethane tubing is stocked in black but other colors are available upon request. SVI conveniently supplies and stocks black by-the-foot or you may order bulk rolls in lengths up to 1000 feet. This means you can purchase exactly what you need for a specific job or in larger quantities to keep your service trucks stocked.

STANDARD Polyurethane Tubing

METRIC Polyurethane TubingSVI Part # O.D. I.D. Wall W.P. (psi) 3:1 (in) (in) Thickness @70° F Burst PressureBH-7903N-100BK 4.0 2.5 .75 200 600BH-7903O-100BK 6.0 4.0 1.0 180 540BH-7903P-100BK 8.0 5.0 1.5 175 525BH-7903Q-100BK 10.0 6.5 1.75 150 450BH-7903R-100BK 12.0 8.0 2.0 150 450

Other color choices•Black = BK•Clear = CL•Green = GR•Clear Blue = CB•Red = RD•White = WH•Yellow = YL


Polyurethane

Length Choices

Black is standard, or specify color.

-100BK = 100’ roll-250BK = 250’ roll-500BK = 500’ roll-1000BK = 1000’ roll-001BK = by the foot

SVI Part # O.D. I.D. Wall W.P. (psi) 3:1 Length (in) (in) Thickness @70° F Burst Pressure of RollBH-7903D-100BK .250 .156 .047 180 540 100’BH-7903D-250BK .250 .156 .047 180 540 250’BH-7903D-500BK .250 .156 .047 180 540 500’BH-7903D-1000BK .250 .156 .047 180 540 1000’BH-7903D-001BK .250 .156 .047 180 540 By the Foot

BH-7903F-100BK .375 .250 .063 150 450 100’BH-7903F-250BK .375 .250 .063 150 450 250’BH-7903F-500BK .375 .250 .063 150 450 500’BH-7903F-1000BK .375 .250 .063 150 450 1000’BH-7903F-001BK .375 .250 .063 150 450 By the Foot



Page

5

TOLL FREE:800-321-8173


Polypropylene at a glance•Lightweight and Durable•Higher Working Pressures •Excellent Outdoor Durability•Acid & Chemical Resistant•Heat Resistant•Use with Brass or Plastic Resin Fittings•Color: Black

Uses:•Auto Lift Air Lock Systems•Auto & Truck Tire Changers•Air Tools•Lube Lines•Drain Lines•Chemical & Solvent Lines• Instrumentation

Parflex Polypropylene tubing by Parker, available in black only, is durable and lightweight and is suited for applications where higher temperatures and working pressures are expected. This tubing is standard equipment on air locking systems on Rotary Lift models. Parflex is also excellent for use outdoors, in direct sunlight, and is acid and chemically resistant. SVI supplies this tubing in 1/4” and 3/8” OD sizes and conveniently supplies and stocks it in black. It is sold by-the-foot or you may order bulk rolls in lengths up to 500 feet. This means you can purchase exactly what you need for a specific job or in larger quantities to keep your service trucks stocked.

Parflex Polypropylene Air Line Tubing

SVI Part # O.D. I.D. Wall W.P. (psi) 3:1 Length (in) (in) Thickness @70° F Burst Pressure of RollBH-7904D-100BK .250 .170 .040 300 1200 100’ RollBH-7904D-500BK .250 .170 .040 300 1200 500’ RollBH-7904D-001BK .250 .170 .040 300 1200 By the Foot

BH-7904F-100BK .375 .250 .062 300 1200 100’ RollBH-7904F-500BK .375 .250 .062 300 1200 500’ RollBH-7904F-001BK .375 .250 .062 300 1200 By the Foot

STANDARD Polypropylene Tubing

Available in Black only


Parflex Polypropylene


Page

6DSP7900 - 9.13.18

TOLL FREE:800-321-8173


for Polyethylene, Nylon, Polyurethane & Polypropylene Air Line Tubing

SVI Part # OD Tube NPTBH-7910-034 1/4” 1/8”BH-7910-035 1/4” 1/4”BH-7910-036 1/4” 3/8”BH-7910-039 3/8” 1/4”BH-7910-040 3/8” 3/8”BH-7910-041 3/8” 1/2”

SVI Part # OD Tube NPTBH-7910-054 1/4” 1/8”BH-7910-055 1/4” 1/4”BH-7910-056 1/4” 3/8”BH-7910-060 3/8” 1/8”BH-7910-061 3/8” 1/4”BH-7910-062 3/8” 3/8”BH-7910-063 3/8” 1/2”

Straight Male Connector Straight Union

Different Union

Union Elbow

Union Tee

Bulkhead Union

Female Bulkhead Union

Straight Female Connector

Swivel Male Elbow

Swivel Male Tee

Swivel Male Run Tee



Standard Push-On Fittings - NPT Thread

Standard Push-On Fittings—NPT Thread


SVI Part # OD Tube BH-7910-121 1/4” BH-7910-123 3/8”

SVI Part # OD Tube OD TubeBH-7910-125 1/4” 5/32”BH-7910-126 5/16” 1/4”BH-7910-127 3/8” 5/16”BH-7910-128 1/2” 3/8”

SVI Part # OD TubeBH-7910-130 1/4”BH-7910-132 3/8”

SVI Part # OD TubeBH-7910-151 1/4”BH-7910-153 3/8”BH-7910-154 1/2”


SVI Part # OD TubeBH-7910-135 1/4”BH-7910-137 3/8”

Nickel-Plated Brass


Page

7

TOLL FREE:800-321-8173


Standard Push-On Fittings - NPT Threadfor Polyethylene, Nylon, Polyurethane & Polypropylene Air Line Tubing

POM (Polyoxymethylene) Resin

Standard Push-On Fittings— NPT Thread

Swivel Male Elbow

Swivel Male Tee

Swivel Male Run Tee

Union Tee

Swivel Branch Y

SVI Part # OD Tube BH-7911-081 1/4” BH-7911-083 3/8”





Swivel Union YSVI Part # OD TubBH-7911-088 1/4”BH-7911-090 3/8”


Page

8DSP7900 - 9.13.18

TOLL FREE:800-321-8173


Metric Push-on Fittings - BSPT Thread (British Standard Pipe Thread)for Metric Polyethylene, Nylon & Polyurethane Air Line Tubing

Nickel-Plated Brass

SVI Part # OD Tube BSPTBH-7912-040 4mm 1/8”BH-7912-041 4mm 1/4”BH-7912-042 6mm 1/8”BH-7912-043 6mm 1/4”BH-7912-044 6mm 3/8”BH-7912-045 8mm 1/8”BH-7912-046 8mm 1/4”BH-7912-047 8mm 3/8”BH-7912-048 10mm 1/4”BH-7912-049 10mm 3/8”BH-7912-050 12mm 1/4”BH-7912-051 12mm 3/8”BH-7912-052 12mm 1/2”

Please Note: The Metric Push-on Fittings that appear on the following pages are British Standard Pipe Thread (BSPT).

British Standard Pipe Thread is recognized internationally as British Metric. Standard Pipe Thread in the United States is NPT or National Pipe Thread. BSPT is a tapered thread similar to NPT. Although similar, they should not be interchanged. Please beware that some equipment manufactured in Europe may use British Standard Pipe Parallel (BSPP) which does not have a taper. Before ordering please check the owner’s manual of the particular machine for the proper thread sizes. Other thread sizes are available upon request.

Metric Push-On FittingsBSPT Thread

Metric Straight Male Connector

Metric Swivel Male Elbow

Metric Swivel Male Tee

Metric Swivel Male Run Tee

Metric Straight Female Connector

SVI Part # OD Tube BSPTBH-7912-002 4mm 1/8”BH-7912-003 4mm 1/4”BH-7912-005 6mm 1/8”BH-7912-006 6mm 1/4”BH-7912-007 6mm 3/8”BH-7912-008 8mm 1/8”BH-7912-009 8mm 1/4”BH-7912-010 8mm 3/8”BH-7912-011 8mm 1/2”BH-7912-012 10mm 1/8”BH-7912-013 10mm 1/4”BH-7912-014 10mm 3/8”BH-7912-015 12mm 1/4”BH-7912-016 12mm 3/8”BH-7912-017 12mm 1/2”

SVI Part # OD Tube BSPTBH-7912-086 4mm 1/8”BH-7912-087 4mm 1/4”BH-7912-089 6mm 1/8”BH-7912-090 6mm 1/4”BH-7912-091 6mm 3/8”BH-7912-092 8mm 1/8”BH-7912-093 8mm 1/4”BH-7912-094 8mm 3/8”BH-7912-095 10mm 1/8”BH-7912-096 10mm 1/4”BH-7912-097 10mm 3/8” BH-7912-098 10mm 1/2” BH-7912-099 12mm 1/4” BH-7912-100 12mm 3/8” BH-7912-101 12mm 1/2”


SVI Part # OD Tube BSPTBH-7912-061 4mm 1/8”BH-7912-062 4mm 1/4”BH-7912-064 6mm 1/8”BH-7912-065 6mm 1/4”BH-7912-066 6mm 3/8”BH-7912-067 8mm 1/8”BH-7912-068 8mm 1/4”BH-7912-069 8mm 3/8”BH-7912-070 10mm 1/8”BH-7912-071 10mm 1/4”BH-7912-072 10mm 3/8”BH-7912-073 12mm 1/4”BH-7912-074 12mm 3/8”BH-7912-075 12mm 1/2”


Page

9

TOLL FREE:800-321-8173


Metric Push-on Fittings - BSPT Thread (British Standard Pipe Thread)for Metric Polyethylene, Nylon & Polyurethane Air Line Tubing Nickel-Plated Brass

SVI Part # OD TubeBH-7912-135 4mm BH-7912-136 6mm BH-7912-137 8mmBH-7912-138 10mmBH-7912-139 12mm

SVI Part # OD Tube OD TubeBH-7912-142 6mm 4mmBH-7912-143 8mm 6mmBH-7912-144 10mm 8mmBH-7912-145 12mm 10mm

SVI Part # OD Tube BH-7912-150 4mmBH-7912-151 6mmBH-7912-152 8mmBH-7912-153 10mmBH-7912-154 12mm


SVI Part # OD Tube BSPT BH-7912-180 4mm 1/8”BH-7912-181 4mm 1/4”BH-7912-182 6mm 1/8”BH-7912-183 6mm 1/4”BH-7912-184 6mm 3/8”BH-7912-185 8mm 1/8”BH-7912-186 8mm 1/4”BH-7912-187 8mm 3/8”BH-7912-188 10mm 1/4”BH-7912-189 10mm 3/8”BH-7912-190 10mm 1/2”BH-7912-191 12mm 1/4”BH-7912-192 12mm 3/8”BH-7912-193 12mm 1/2”


Metric Push-On Fittings— BSPT Thread

Metric Straight Union

Metric Different Union

Metric Union Elbow

Metric Union Tee

Metric Bulkhead Union

Metric Female Bulkhead Union


Page

10DSP7900 - 9.13.18

TOLL FREE:800-321-8173


POM (Polyoxymethylene) Resin

Metric Push-on Fittings - BSPT Thread (British Standard Pipe Thread)for Metric Polyethylene, Nylon & Polyurethane Air Line Tubing

Metric Push-On Fittings—

BSPT Thread




SVI Part # OD Tube BH-7913-110 4mmBH-7913-111 6mmBH-7913-112 8mmBH-7913-113 10mm

SVI Part # OD Tube BSPTBH-7913-117 4mm 1/8”BH-7913-118 4mm 1/4”BH-7913-120 6mm 1/8”BH-7913-121 6mm 1/4”BH-7913-122 6mm 3/8”BH-7913-123 8mm 1/8”BH-7913-124 8mm 1/4”BH-7913-125 8mm 3/8”BH-7913-126 10mm 1/4”BH-7913-127 10mm 3/8”BH-7913-128 10mm 1/2”


Metric Swivel Branch Y Metric Swivel Male Run Tee

Metric Union Tee

Metric Male Swivel Male Elbow

Metric Swivel Union Y

Metric Swivel Male Tee


Page

11

TOLL FREE:800-321-8173


D.O.T. Push-On Fittings - NPT Threadfor D.O.T. Type “A” & Type “B” Air Line Tubing

D.O.T. Push-On Fittings— NPT Thread

Brass

SVI Part # OD Tube NPTBH-7914-005 1/4” 1/8”BH-7914-006 1/4” 1/4”BH-7914-007 1/4” 3/8”BH-7914-011 3/8” 1/8”BH-7914-012 3/8” 1/4”BH-7914-013 3/8” 3/8”BH-7914-014 3/8” 1/2”BH-7914-015 1/2” 1/4”BH-7915-016 1/2” 3/8”BH-7915-017 1/2” 1/2”


SVI Part # OD Tube NPTBH-7914-054 1/4” 1/8”BH-7914-055 1/4” 1/4”BH-7914-056 1/4” 3/8”BH-7914-060 3/8” 1/8”BH-7914-061 3/8” 1/4”BH-7914-062 3/8” 3/8”BH-7914-063 3/8” 1/2”BH-7914-064 1/2” 1/4”BH-7914-065 1/2” 3/8”BH-7914-066 1/2” 1/2”

SVI Part # OD Tube NPTBH-7914-026 1/4” 1/8”BH-7914-027 1/4” 1/4”BH-7914-028 1/4” 3/8”BH-7914-029 3/8” 1/8”BH-7914-030 3/8” 1/4”

Straight Male Connector Union Elbow

Male Run Tee

Swivel Male Run Tee

Swivel Male Tee

Union Connector

Female Connector

Male Elbow

Female Elbow

SVI Part # OD Tube OD TubeBH-7914-070 1/4” 1/4”BH-7914-072 3/8” 3/8”BH-7914-074 1/2” 1/2”

SVI Part # OD Tube NPTBH-7914-080 1/4” 1/8”BH-7914-081 1/4” 1/4”BH-7914-084 3/8” 1/4”BH-7914-085 3/8” 3/8”BH-7914-087 1/2” 3/8”



SVI Part # OD Tube OD TubeBH-7914-119 1/4” 1/4”BH-7914-120 3/8” 3/8”BH-7914-121 1/2” 1/2”


Page

12DSP7900 - 9.13.18

TOLL FREE:800-321-8173


SVI Part # Description OEM OEM# CommentsBH-7157-59 Air Release Valve ALM X00096 4-Posters BH-7152-05 Air Release Valve ALM X00113 2-PostersBH-7152-06 Air Cylinder ALM A00095 1-Side portBH-7210-22 Air Cylinder Benwil 200077 GPI-9 Series Cassette LiftsBH-7213-01 Air Release Valve Benwil 500373 4-PostersBH-7213-60 Air Cylinder Benwil 500068 4-PostersBH-7228-73 Air Release Valve Challenger 37016 37000; 39000; 70000BH-7229-29 Air Cylinder Challenger 37026 37000; 39000; 70000BH-7238-26 Air Cylinder Forward WG-1,

QG01-9100FWD BH-7251-42 Air Cylinder Globe 913830 1-Side port; 1-Rear portBH-7278-01 Air Cylinder Hunter BH-7289-09 Air Cylinder Hydralift 78830 1-Side port; 1-Rear portBH-7437-34 Air Cylinder PMW 002120 4-PostersBH-7476-11 Air Cylinder Bend Pak S110 4-PostersBH-7501-53 Air Cylinder Rotary FA2230-1 RoundBH-7503-94 Air Cylinder Rotary FC5708-2 D-Shaped 2-Ports 1-PluggedBH-7504-19K Air Release Valve Kit Rotary N620 4-PostersBH-7506-01 Air Cylinder Rotary FC5706-6 D-Shaped; Side portBH-7514-20 Air Release Valve Rotary FA3203 Push button styleBH-7515-01 Air Cylinder Rotary FA2273-20 2-Ports w/elbowsBH-7515-02 Air Release Valve Rotary FA2273-3 Toggle styleBH-7515-46 Air Cylinder Rotary FC5224-33 Fully retractedBH-7517-29 Air Cylinder Rotary FC5309-3 D-Shaped; 1-Side PortBH-7528-92 Air Cylinder Rotary N61 D-Shaped; 1-Side PortBH-7530-90 Air Cylinder Rotary FC5706-17 Order BH-7503-94BH-7542-61 Air Cylinder Rotary S130017 D-Shaped; 2-Side PortsBH-9413-14 Air Release Valve Globe 918053 Normally closedBH-9432-01 Air Cylinder Globe 916987 1-Rear portBH-9432-02 Air Release Valve Globe 916990 Normally openBH-9667-01 Air Release Valve Weaver S-18325 Old style valve; 3-Ports; 2-mounting holesBH-9667-01A Air Release Valve Weaver Newer style valve; 2-Ports; No mount holes BH-9667-02 Air Cylinder Weaver S-25502 Rear port; fully retractedBH-9667-03 Air Cylinder Weaver S-25534 Side port; fully extendedBH-9775-07 Air Cylinder Rotary FA299-15 Single cylinders; fully retractedBH-9775-11 Air Cylinder Rotary FA2106-10 Dual cylinders; fully extendedBH-9786-10 Air Cylinder Rotary T100145 Cassette LiftsBH-9786-15 Air Release Valve Rotary T140073 4-Posters

Air Release Valves & Air CylindersFor 2-Post and 4-Post Surface Mount Lifts and In-Ground Fore & Afts

BH-7152-05for ALM

(Ref # X00113)

BH-7152-06for ALM

(Ref # A00095)

BH-7210-22for Benwil

(Ref # 200077)

BH-7157-59for ALM

(Ref # X00096)

Air Release Valves& Air Cylinders

BH-7278-01for Hunter


Page

13

TOLL FREE:800-321-8173



Air Release Valves & Air CylindersFor 2-Post and 4-Post Surface Mount Lifts and In-Ground Fore & Afts


(Ref # 500373)


(Ref # 500068)

BH-7229-29for Challenger

(Ref # 37026)

BH-7228-73for Challenger

(Ref # 37016)

BH-7251-42for Globe

(Ref # 913830)

BH-7503-94for Rotary

(Ref # FC5708-2)


(Ref # FA2273-20)

BH-7528-92for Rotary(Ref # N61)

BH-7289-09for Hydralift(Ref # 78830)

BH-7504-19Kfor Rotary

(Ref # N620)


(Ref # FC5706-6)


(Ref # FA2230-1)


(Ref # FA3203)


(Ref # FA2273-3)


(Ref # FC5224-33)


(Ref # FC5309-3)


(Ref # S130017)

BH-9413-14for Globe

(Ref # 918053)

BH-7476-11for Bend-Pak(Ref # S110)

BH-9432-01for Globe

(Ref # 916987)

See following page for Internal Airline Kit for Many Rotary 4-Post Models (BH-7509-72)


Page

14DSP7900 - 9.13.18

TOLL FREE:800-321-8173


SVI Part # Description OEM OEM# CommentsBH-7207-33 Recoil Hose Benwil 200098 GPI-9 Series Cassette LiftsBH-7233-53 Recoil Hose Challenger 16147 CS9200 Cassette LiftBH-7508-83 Recoil Hose Rotary FC147-14 Rolling Bridges BH-7544-12 Recoil Hose Rotary T140096 Cassette Lifts

Recoil Air Hoses

BH-9667-03for Weaver

(Ref # S-25534)


(Ref # S-18325)

BH-9667-01Afor Weaver


(Ref # T100145)


(Ref # FA299-15)


(Ref # S-25502)

BH-9432-02for Globe

(Ref # 916990)


(Ref # FA2106-10)


(Ref # T140096)

BH-7233-53for Challenger(Ref # 16147)


(Ref # FC147-14)


Recoil Air Hoses

Internal Airline Kitfor Many Rotary4-Post Lift Models

BH-7509-72 (OEM #FC5760)Some Components Available Individually

Please see our Air Compressor Repair Parts catalog for a complete listing.

Air Release Valves & Air Cylinders


Page

15

TOLL FREE:800-321-8173


Designed to provide slip-free performance on air, water, grease and oil hose. Two styles are available. L-style are the larger, wider style. All hardware is included.

TWO PIECE “DONUT STYLE”HOSE REEL HOSE STOPS

Wide Style

STANDARDBP-1525 for 3/8” ID - 5/8” to 23/32” OD hose

WIDE STYLE (L-Style)BP-1527L Wide-Style for 1/4” ID HoseBP-1525L Wide-Style for 3/8” ID HoseBP-1526L Wide-Style for 1/2” ID Hose

Standard Style

HOSE REELS AND HOSE STOPSSVI offers a huge selection of hose reels and hose stops — call today for catalogs!

Many other styles and sizes available!Request your catalog now:

800-321-8173

VIBRATION DAMPENING PADS FOR COMPRESSORSUse SVI’s rubber pads to reduce vibration noise from air compressors and other equipment. Don’t see what you’re looking for? We have other pads available. Give us a call!

Use SVI’s Vibration Dampening Pads to reduce vibration noise from your air compressor and other equipment. AS-2200-53 and -54 Pads are constructed from extremely durable and long lasting, multiple-ply reinforced rubber.

ChooseYour Size!3” OR 4”SQUARE

1” Thick5/8” Hole

SVI Part # DescriptionAS-2200-53 Vibration Dampening Pad 3” Square x 1” ThickAS-2200-53-4 Vibration Dampening Pads 3” Square x 1” Thick (Set of 4)AS-2200-54 Vibration Dampening Pad 4” Square x 1” ThickAS-2200-54-4 Vibration Dampening Pads 4” Square x 1” Thick (Set of 4)

VIBRATION DAMPENING PADS

Direct Fit BranD

All names, numbers, symbols and descriptions are used for reference purposes only. It is not implied that any part listed is the product of these manufacturers; however, some parts may be the actual product of these manufacturers. Entire contents copyright © 2018, SVI International, Inc. Prices subject to change without notice.

*AMMCO, BASELINE, COATS and DUCKHEAD are registered trademarks of Hennessy Industries, Inc. SVI International, Inc. is not associated in any way with Hennessy Industries, Inc.

3 Ready-Ship Warehouses for Faster Shipping! | BALTIMORE • CHICAGO • LOS ANGELESMain Office: 155 Harvestore Drive • DeKalb, IL 60115

800-321-8173815-748-0200Fax: 800-899-1784 • 815-748-0210E-Mail: [email protected]

EASY TO ORDER:

SVI International, Inc.Catalogs and Information Online: www.sviinternational.com

Accu-TurnAll ToolAmmco®*BaseLine®*BoschCembCoats®*Corghi

FMCGiulianoHofmannHunterJohn Bean / (JBC)Kwik-WayLaunch

NussbaumRangerSicamSiceSnap-OnTecoTuxedo

In addition to SVI’s Direct Fit BranD, we are proud to be a one-stop shop for many other great products including:

and many more!

AIR COMPRESSOR PARTS• Air Receiver Tanks • Compressor Mufflers• Automatic Tank Drain Valve for Champion Compressors• Filters—Many OEM Ref Available!• Filters, Regulators, Lubricators• Intake Filter Products• Milton Air System Products• Re-Coil Hose • Valves• Vibration Dampening Pads & much more!

IN-GROUND LIFT PARTS FOR:

Benwil ChallengerCochin Curtis Ford Smith

GilbarcoGlobeHDL/ISS InnovativeJoyceManitowoc Lifts

SURFACE MOUNT LIFT PARTS FOR:

Acanus Ammco®*Alamo / ASSSA ALM AMIAshawa Ben PearsonBendPak BenwilBishamonBoston BradburyCascosConsul ChallengerForce Ford SmithForward Fuchs / Zippo

GeminiGilbarcoGlobeGrand Hofmann HydraliftIme IstobalKismetKimmKoniLaunchLaycockLincolnMahaManitowoc LiftsMohawk NussbaumOMAOMCN PMW

AUTO LIFT REPAIR PARTS FOR ALL MAKES & MODELS ~NO MATTER THE AGE OF THE LIFT!• Arm Restraint Kits & Parts• Cables—Lifting and Equalizing• Chain• doorjammerPRO - Door Protection Pad• Height Extensions and Rubber Pads• Installation Products & Tools• Power Units and Parts• Pulleys and Chain Rollers• Seal Kits for In-Ground & Surface Mount • Safety Legs / Non-Rotators • Replacement Lift Kits • Power Post Lifting Systems• Tanks for In-Ground Lifts• Turf Attachments for 2-Post Lifts

LUBRICATION & PAINT / FOAM SPRAY REPAIR PARTS & KITS FOR:• Alemite • ARO • Balcrank • Graco • Lincoln

PETROLEUM EQUIPMENT & REPAIR PARTS FOR:• Gas Pump & Meter Kits and Parts for Gasboy • Tokheim • Fill-Rite • Including Parts for Older Pumps: Wayne • Bennett • Gilbarco • Bowser A.O. Smith (Geosource) • Southwest SEAL KITS

SHOP EQUIPMENT• Hein-Werner Products • Omega Products • Porto-Power • Pro-Lift TIRE EQUIPMENT REPAIR PARTS • Tire Changer and Wheel Balancer Parts for All Makes

QualityRangerRavaglioliRotary LiftsSilent TechSliftSomers SouriauStenhoj Stertil KoniSunTecalemitTitanWeaverWertherWesternWestinghouseWheeltronicWorth Zippo

PKS LiftsRotaryUS HoistWeaverWestern

CUSTOM PRODUCTSAnd let us know if you want something you use in your shop to be added to our product line!

VALVES• Air Compressor Valves of All Types• Air and Hoist Control Valves• Ball Valves • Check Valves• Kingston Valves • Pressure Relief Valves• Relief Valves • Safety Valves• Solenoid Valves • Tire Changer Valves • And More!

BRAKE LATHES & REPAIR PARTS• RELS Brake Lathes—RELS 2000 / 2000XL• Brake Lathe Repair Parts and Accessories for All Makes

EXHAUST REMOVAL SYSTEMS & PRODUCTS FLUID DELIVERY• Lenz Fittings• Steel Hydraulic Line Tubing and Fittings• Strut and Hangers HOSE REELS BY REELCRAFT®

HYDRAULIC CYLINDERS— • Custom Single-Acting Large Bore Cylinders• Also see “Lifting Equipment” LIFTING EQUIPMENT• New In-Ground Lifts—Car, Truck & Bus• Small Equipment Shop Maintenance (SESM) Lifts for lifting Landscape Equip. ATVs / UTVs, Motorcycles, Lawn Mowers, Golf Carts and More!• Custom Lifting Equipment incl. Production Line Lifts, Rail Car Lifts and More• Custom Hydraulic Cylinders for Various Applications• Turf Attachments for 2-Post Lifts

TERMS AND CONDITIONS OF THE SALES ORDER

FOR SVI INTERNATIONAL, INC.

1. GENERAL. The terms and conditions of sales order outlined herein shall apply to the sale by SVI INTERNATIONAL, INC. (hereinafter referred to as “Company”) of the items described on the facing page (hereinafter referred to as “Merchandise”) to Purchaser.

2. DELIVERY. Delivery shall be deemed to be complete when the Merchandise has been shipped F.O.B. Company’s plants in DeKalb, Illinois, Montclair, California; and Baltimore, Maryland (“Company’s plants”). Shipments are subject to delays from causes or contingencies beyond the reasonable control of the Company. When otherwise not specified, shipments will be made in standard containers via carrier which, in the judgment of the Company, will result in the most practical method. Title and right of possession will pass to the Purchaser upon receipt by the carrier at the shipping point. If a customer of the Company should specify a specific carrier’s method of shipment (i.e. UPS Next Day Air) and that carrier does not perform to the customer’s expectations, freight credit to acustomer’s account will not be issued unless the Company can first obtain a credit.

3. RISK OF LOSS. Identification of the Merchandise under Uniform Commercial Code (hereinafter referred to as “UCC”) Section 2-501 shall take place at the moment of shipment F.O.B. Company’s plants. Risk of loss shall pass to the Purchaser when the Merchandise is shipped from the Company’s plants.

4. TITLE. Title to the merchandise shall transfer to the Purchaser when the Merchandise is shipped from the Company’s plants.5. WARRANTIES. The Company guarantees its products to be free from defects in workmanship and raw materials for a period of one year

from date of purchase. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY AND ALL WARRANTIES EXPRESS OR IMPLIED. COMPANY DOES NOT WARRANT THE MERCHANDISE IS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE. Company’s liability for breach of the terms of this Agreement, including any warranty, is limited to either refund of the invoice price of the Merchandise or at Company’s option, replacement of the Merchandise free of charge, including transportation charges but not includingthe cost of labor. Purchaser has not relied on any statement or upon the conduct of Company with respect to the prospective use of the merchandise. Company shall not be liable for and Purchaser waives any and all claims for any loss or damage, directly or indirectly, arising from the use of the Merchandise and for punitive, incidental or consequential damages, including, but not limited to, damages to property, for loss of use, loss of time, loss of profit or loss of income. The Company does not authorize the sale of our products under any other warranty, expressed or implied.

6. SETOFF. All claims for money due or to become due from the Company shall be subject to deduction by the Company for any setoff or counterclaim arising out of this or any other claims of the Company or its affiliated companies, whether such setoff or counterclaim arose before or after any assignment by Purchaser.

7. INDEMNIFICATION. Purchaser agrees to indemnify the Company and hold it harmless from and against all claims, liability, loss, damage or expense, including reasonable counsel fees, arising from or by reason of any modifications or alterations made by Purchaser.If a customer of the Company modifies or alters any part, in any manner whatsoever, or uses any part in departure from recommendedperformance specifications, said customer agrees to indemnify and hold the Company harmless from and against all liability and expenses based on damage to property or injury to or death of any person arising out of or attributable to such modified or altered part. Further, the Company will not accept any such modified or altered part for credit to a customer’s account.

8. FREIGHT POLICY. Freight charges on individual orders less than $3000 in net value, are prepaid and added to invoice or collect FOB shipping point. Freight charges on one shipment only (standard ground service and to the continental US only) on most $3000 net value orders may be paid by SVI International, Inc. - FOB shipping point. Please speak to your Salesperson for exceptions to this Freight policy for your specific order. Note: Customers with COD terms are responsible for all carrier COD fees regardless of order, including refusal fees.

9. RETURN POLICY. To return a part for credit or inspection, Purchaser must first contact our Main Office in Illinois, to obtain a Return Merchandise Form. Once Purchaser has obtained this form, the parts can be returned freight prepaid only. The Return form must beincluded with the shipment. Parts returned to the Company without the approved form will be returned freight collect to the shipper or refused. Returns must be initiated within 60 days of the invoice date. The Return Forms are valid for 60 days, from the date of issue. All Returns are subject to 25% restocking charges. Return parts brought into our remote warehouses, will not be accepted by our personnel,without a Return Merchandise Form from the Main Office. Parts which have been used in any way or manner, including any installation or incorporation into a lift, hoist, or other equipment, shall NOT be eligible for return whether or not a Return form has been assigned.

10. RESTOCK CHARGE. Returns are subject to up to twenty-five (25%) restocking charge. Refusals are subject to the same restocking charge plus the cost of outbound and return freight charges and/or fees incurred by the Company due to shipment refusal.

11. PRICES AND PAYMENTS. All prices are subject to change without notice. All prices are F.O.B. shipping point. The Company standard terms are net 30 days, C.O.D. company check, C.O.D. cash, VISA, MasterCard, Discover or American Express. However, if in the judgment of the Company, the financial condition of the Purchaser at any time does not justify shipment according to standard terms of payment, the Company may require full or partial payment in advance.

12. INTERPRETATION. This sales order is intended by the parties as a complete and exclusive statement of the terms of their agreement. It supersedes all prior agreements, written or oral. No course of prior dealings between the parties and no usage of the trade shall be relevant to supplement or explain any terms used in this sales order. Acceptance or acquiescence in a course of performance renderedunder this purchase order shall not be relevant to determine the meaning of this sales order even though the accepting or acquiescingparty has knowledge of the nature of the performance and opportunity for objection. Whenever a term defined by the UCC is used in this sales order the definition contained in the UCC shall control.

13. MODIFICATION. This sales order can be modified or rescinded only by a writing signed by both parties.14. WAIVER. No claim or right arising out of a breach of this sales order can be discharged in whole or in part by a waiver or renunciation of

the claim or right unless such waiver or renunciation is supported by consideration and is in writing signed by the aggrieved party.15. ASSIGNMENT. No right or interest in this sales order shall be assigned by either party without the written consent of the other and no

delegation of any obligation owed, or of the performance of any obligation by either the Company or Purchaser shall be made without the written consent of the other party. Any attempted assignment or delegation not made in conformity with this paragraph shall be wholly void and totally ineffective for all purposes.

16. TIME TO PERFORM AND BRING ACTION. Time is of the essence of this sales order. Any action for breach of this sales order shall be commenced within two (2) years after the cause of action has accrued. Any party who loses any litigation shall reimburse the other party for costs including reasonable attorney’s fees. The exclusive jurisdiction for any legal action shall be the Circuit Court of DeKalb County, Illinois.

17. APPLICABLE LAW. This sales order shall be governed by the UCC of Illinois as effective and in force on the date of this sales order.

• Air Compressor Parts and Filters• Auto Lift Parts for Any Brand• Auto Lift Cables and Chain• Auto Lift Power Units and Parts• Auto Lift Sheaves / Pulleys and Chain Rollers• Brake Lathe Repair Parts• Exhaust System Products • Fluid Delivery Repair Parts• Hose Reels and Hose Stops• In-Ground Auto Lifts• Lubrication Equipment Repair Parts • Petroleum / Service Station Pump and Tank Products • Repair Parts for Gasboy Consumer Series• SESM Lifts for ATV/UTV, Golf Cart and More!• Tire Changer Repair Parts • Transfer Pumps• Turf Attachments for 2-Post Lifts• Vehicle Lifting Systems • Wheel Balancer Accessories

SVI International, Inc.155 Harvestore Drive • DeKalb, IL 60115

800-321-8173 • 815-748-0200Fax: 800-899-1784 • 815-748-0210

Information and Catalogs Online:www.sviinternational.com

ASIDE FROM A COMPLETE LINE OF AIR LINE TUBING & FITTINGS, SVI OFFERS A HUGE SELECTION OF PRODUCTS FOR THE SHOP.

Entire contents copyright © 2018, SVI International, Inc.

B A L T I M O R E • C H I C A G O • L O S A N G E L E S

delivery system products - svi international

Documents