TENAX CORPORATION

4800 E. Monument Street / Baltimore, MD 21205

phone 410-522-7000 / fax 410-522-3190 / www.tenaxus.com

UV 5

Deer Fence Kit Instructions

Step 1:Place each post no more than 10’ apart. Lightly tap each post into the ground 12”. If the ground is hard use a bulb auger or post hole digger to create a pilot hole.

Step 2:Using 5 fence ties per post, attach the netting to each post and extend the poles as you go around the perimeter of the fence.

Step 3:Place a sod staple through the netting and into the ground every 5’. (deters animals from entering through the bottom of fence)

Step 4:To secure two sections of netting together, overlap the net-ting 3-4” and secure with tie wire or fence ties.

Step 5:Create a flap for entry point. Protect your plants.