19

www.basor.comDECLARATION OF CONFORMITY

DECLARACIÓN DE CONFORMIDAD

The company / La Empresa:

BASOR ELECTRIC, S.A.

Address / Dirección:

Av. Alcodar, 45-47, 46700. Gandía (VLC), Spain.

Declares that the product:

Declara que el producto:BASORTRAY MRE

Installed in accordance to the installa! on standards, manufacturer’s instruc! ons and professional rules, duly maintained and used for the applica! ons as intended.

Instalado de acuerdo con las normas de instalación, instrucciones del fabricante y conforme a las reglas profesionales, debidamente mantenido y u! lizado en las aplicaciones para las que está previsto.

Complies with the essen! al requirements of the Council Direc! ves:

Cumple con los requisitos esenciales de las Direc! vas del Consejo:2014/35/UE (Low Voltage Direc! ve) / (Direc� va de Baja Tensión)

Incorporated in the Spanish Legisla! on in: R.D. 7/1988 and its modifi ca! on R.D. 154/1995.

Incorporado en la Legislación Española en: R.D. 7/1988 y su modifi cación R.D. 154/1995.

And it is suitable and safe for the intended use and it is in conformity with the following standard:

Es adecuado y seguro para el uso a que está des! nado y es conforme con la siguiente norma:UNE EN 61537

Addi! onal informa! on:

Información adicional:

This product is intended to be installed and maintained by skilled persons, it may be used by ordinary persons only as a replacement part, to subs! tute for an iden! cal device.

Este producto está previsto para ser instalado y mantenido por un profesional, puede ser usado por una persona no formada para reemplazamiento de uno idén! co.

Place and date:

Lugar y fecha:

Gandía April 2016

Gandía Abril 2016

Technical department / Departamento Técnico

20

DATA SHEET BASORTRAY MRE

UNE-EN 61537 REV.20/04/2016

www.basor.com

ER 50x50+TAPAMRE

MOUNTING INSTRUCTIONS

SAFE WORKING LOAD

Models (BxH):

100x60; 150x60; 200x60; 300x60; 400x60; 500x60; 600x60; 100x80; 150x80; 200x80; 300x80; 400x80; 500x80; 600x80; 150x100; 200x100; 300x100; 400x100; 500x100; 600x100.

Finishes: PG; HDG

Characteristics of the cable tray:

- Metallic

- Non-! ame propagating component

- System with electrical continuity

- Electrically conductive component

- Minimum temperature of -50 ˚C

- Maximum temperature of 150 ˚C

- With metallic coating, resistance to corrosion:PG coating: class 3

HDG coating: class 5

- Impact strenght: 20J

Base Models Classi" cation

100 C

150 B

200 C

300 C

400 C

500 C

600 C

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

CTA

Def

CTA

(K

g/m

)

20

40

60

80

100

120

140

160

De

f (mm

)

d (m)

1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5

MRE H=60 mm

4

6

8

10

12

CTA

Def

CTA

(K

g/m

)

40

60

80

100

120

140

160

180

De

f (mm

)

d (m)

1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5

MRE H=80 mm

- Classi" cation acc. to the free base area:

Non-drilled tray: A

Drilled tray:

- Set up the self-assembly system 4 B1 bolt sets are needed for each cable tray and no union are needed.

- The tray installation for an electrical system should NOT run under other types of canalisations such as water, vapour or gas.

- To guarantee a good ventilation we recommend installing the trays keeping a minimum distance of 250 mm between each tray.

- Trays which are placed on supports shall have to keep a gap of 20 mm from the wall to allow for a correct ventilation of the cables.

Accesories:

This family has large array of accessories: Cover, divider, horizontal bend, vertical inside/outside bends, T intersection, cross intersection, reduction, AS lateral derivation, union joint, articulated union joints.

100; 00 00; 500x100; 600 00.

This technical data sheet issued accordingly to the ful" llment of the product Standard, is itself a necessary analyses of the electric risks according to the low tension Directive 2014/35/UE of February 26th 2014, in e# ect from April 20th 2016

21

SAFE WORKING LOAD

2

4

6

8

10

12

14

16

18

20

CTA

Def

CTA

(K

g/m

)

20

40

60

80

100

120

140

160

180

200

De

f (mm

)

d (m)

1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0

MRE H=100 mm

This technical data sheet issued accordingly to the ful! llment of the product Standard, is itself a necessary analyses of the electric risks according to the low tension Directive 2014/35/UE of February 26th 2014, in e" ect from April 20th 2016