deckshield - flowcrete asia · 2021. 3. 9. · astm d4541 (pull-off test) >1.5 mpa* fire...
TRANSCRIPT
www.flowcreteasia.com
DECKSHIELD⊲ Protection systems designed to meet contemporary requirements for upmarket car park environments.
Deckshield Range Technical Profile
Application Suitability
Multi storey car parks have always been many customers’ first point of contact with commercial destinations, but it is only recently that developers have made efforts to improve the quality of the car park experience.
Although often underestimated, the correct specification of waterproofing and surfacing materials is critical, within the car park environment, to delivering a long-term, structurally protected and safe facility for car park operators and vehicle owners.
Flowcrete’s Deckshield range offers a number of colourful deck coating solutions geared up to provide slip-resistance, durability and an excellent service life as well as stand-up to common car park problems. What’s more, Flowcrete’s deck coating systems are Singapore Green Label certified.
Exposed Decks Internal Decks Ramps
Instructional Signage Demarcation Kerbs / Islands
Product SelectorEach parking facility consists of a range of zones or areas and requires a number of surface applications as a result. Flowcrete offers a wide range of flooring products to meet the surface requirements of the entire car park as well as neighbouring zones.
Line Marking
Multi-storey Top Deck
RampsMulti-storey
Internal Deck
StairwaysTurning Circles
Stair Landings
Entrance to Shopping Malls
Deckshield ID
A Green Label certified polyurethane car park deck coating system for intermediate multi storey decks.
Deckshield ID cosmetically enhances and reduces noise, making multi storey car parks brighter, safer environments to visit.
Attractive to brighten up dark car parks
100% UV stable, without yellowing
Protects against chemicals, fire and slips
Green Label certified and low in VOCs
For
a fu
ll Te
chni
cal P
rofil
e, c
onta
ct y
our
loca
l Tec
hnic
al D
epar
tmen
t.
Technical Profile
TEMPERATURE RESISTANCESoftens over 70˚C, hardens on cooling
RESISTANCE TO CHLORIDE IONSDOT BD47/94: Appendix B, Method B4,2(d).
No chloride ion penetration after 28 days
BOND STRENGTHASTM D4541 (Pull-Off Test) >1.5 MPa*
FIRE RESISTANCEEN 13501-1 Bfl - s1
SLIP RESISTANCEBS 7976-2 (typical values for 4-S rubber slider)
Dry >40, Wet dependant on specification
ABRASION RESISTANCETaber Abrader (1kg load using CS17 wheels)
0.1 g loss per 1000 cycles
VOC CONTENTISO11890-2 Very low <20 g/L
Deckshield Oxide / Quartz
Prepared Substrate
Deckshield Finish
Deckshield UV (WB)
Deckshield SF
032-089 Environmentally Preferred
Coating
*Assumes concrete compressive strength is greater than 25N/mm2
Technical Profile
TEMPERATURE RESISTANCETolerant up to 60°C
WATER PERMEABILITYKarsten Test Nil (Impermeable)
BOND STRENGTHASTM D4541 (Pull-Off Test) >1.5 MPa*
FIRE RESISTANCEEN 13501-1 Bfl - s1
SLIP RESISTANCEBS 7976-2 Dry >40, Wet dependant
on specification
ABRASION RESISTANCETaber Abrader (1 kg load using CS10 wheels)
80 mg loss per 1000 cycles
SURFACE HARDNESSKoenig Hardness Test 180 Seconds
SPEED OF CURE** 10˚C 20˚C 30˚CLight Traffic 48 hrs 24 hrs 18 hrs
Full Traffic 72 hrs 48 hrs 36 hrs
Full Chemical Cure 12 days 7 days 6 days
A Green Label certified epoxy car park deck coating system providing a colourful watertight, surface for intermediate decks of multi storey structures.
Deckcoat EP cosmetically enhances and reduces noise, making multi storey car park decks brighter, safer environments to visit.
** C
ure
times
at t
empe
ratu
res
betw
een
0-30
˚C c
an b
e ac
hiev
ed b
y al
terin
g th
e qu
antit
y of
cat
alys
t use
d.
For
appl
icat
ions
falli
ng o
utsi
de o
f thi
s te
mpe
ratu
re r
ange
, ple
ase
cont
act y
our
loca
l Flo
wcr
ete
Tech
nica
l Dep
artm
ent.
*Assumes concrete compressive strength is greater than 25N/mm2
Deckcoat EP
Environmentally Friendly: Green Label certified and low in Volatile Organic Compounds (VOCs).
Attractive: Brightens up dull, dark and musty car park environments.
Resistant: Resistance to chemicals, fire and has a low slip potential.
Chemical Resistance
Petrol
Diesel
Antifreeze
Hydraulic Fluid
Chlorides
Natural Quartz Scatter
Prepared Substrate
Deckcoat EP Topcoat
Deckcoat EP Primer
*Assumes concrete compressive strength is greater than 25N/mm2
032-089 Environmentally Preferred
Coating
Technical Profile
TEMPERATURE RESISTANCETolerant up to 60˚C
BOND STRENGTHASTM D4541 (Pull-Off Test) >1.5 MPa*
FIRE RESISTANCEEN 13501-1 Bfl - s1
SLIP RESISTANCEBS 7976-2 Dry >40, Wet dependant
on specification
WATER VAPOUR TRANSMISSIONASTM E96 3.19 g / m2 / 24 hrs
SURFACE HARDNESSASTM D 2240 D Shore D 50
SPEED OF CURE** 10˚C 20˚C 30˚CLight Traffic 36 hrs 24 hrs 16 hrs
Full Traffic 48 hrs 36 hrs 24 hrs
Full Chemical Cure 14 days 7 days 6 days
A Green Label certified pigmented, low VOC, water-based epoxy, car park deck coating system specifically designed to withstand the damp environments of basement car parks.
Deckcoat EPW cosmetically enhances and reduces noise making the car park environment a brighter, safer, more welcoming environment to visit.
** C
ure
times
at t
empe
ratu
res
betw
een
0-30
˚C c
an b
e ac
hiev
ed b
y al
terin
g th
e qu
antit
y of
cat
alys
t use
d.
For
appl
icat
ions
falli
ng o
utsi
de o
f thi
s te
mpe
ratu
re r
ange
, ple
ase
cont
act y
our
loca
l Flo
wcr
ete
Tech
nica
l Dep
artm
ent.
Environmentally Friendly: Green Label certified and low in Volatile Organic Compounds (VOCs).
Chemical Resistant: Resistant to chemicals, engine oils and brake fluids.
Economical:Provides value for money alongside good performance.
*Assumes concrete compressive strength is greater than 25N/mm2
Deckcoat EPW 032-089 Environmentally Preferred
Coating
Chemical Resistance
Petrol
Diesel
Antifreeze
Engine Oil
Chlorides
Battery Acids
Deckcoat EPW Basecoat
Prepared Substrate
Deckcoat EPW Topcoat
Deckcoat EPW Primer
Technical Profile
TEMPERATURE RESISTANCESoftens over 70˚C, hardens on cooling
CAPILLARY ABSORPTION & PERMEABILITY TO WATEREN 1062-3 w <0.1 kg / m2 x h0.5
RESISTANCE TO CHLORIDE IONSDOT BD47/94: Appendix B, Method B4,2(d).
No chloride ion penetration after 28 days
BOND STRENGTHASTM D4541 (Pull-Off Test) >1.5 MPa*
FIRE RESISTANCEEN 13501-1 Bfl - s1
SLIP RESISTANCEBS 7976-2 Dry >40, Wet dependant
on specification
ABRASION RESISTANCETaber Abrader (1 kg load using CS17 wheels)
300 mg loss per 1000 cycles
SPEED OF CURE** 10˚C 20˚C 30˚CLight Traffic 30 hrs 18 hrs 12 hrs
Full Traffic 48 hrs 36 hrs 24 hrs
Full Chemical Cure 12 days 7 days 6 days
A polyurethane car park deck coating system providing a colourful crack bridging, waterproof surface for exposed decks.
Deckshield ED cosmetically enhances and reduces noise, making exposed car park decks brighter, safer environments to visit.
** C
ure
times
at t
empe
ratu
res
betw
een
0-30
˚C c
an b
e ac
hiev
ed b
y al
terin
g th
e qu
antit
y of
cat
alys
t use
d.
For
appl
icat
ions
falli
ng o
utsi
de o
f thi
s te
mpe
ratu
re r
ange
, ple
ase
cont
act y
our
loca
l Flo
wcr
ete
Tech
nica
l Dep
artm
ent.
Waterproofing: A waterproof surface that protects the concrete structure against weather.
Environmentally Friendly: Low in Volatile Organic Compounds (VOCs) and solvent free..
Attractive: Brightens up dull, dark and musty car park environments.
Resistant: Excellent resistance to chemicals, fire and has a low slip potential.
Reduces Noise: Higher textured finishes reduce unwanted tyre squeal.
UV Stable: 100% UV light stable. Prevents from yellowing effect.
*Assumes concrete compressive strength is greater than 25N/mm2
Deckshield ED
Deckshield Finish
Deckshield Oxide 0.8–1.2mm Scatter
Natural Quartz 0.3–0.6mm Scatter
Prepared Substrate
Deckshield ED Primer
Deckshield Finish
Deckshield UV (WB)
Deckcoat ED Membrane
Chemical Resistance
Petrol
Diesel
Antifreeze
Hydraulic Fluid
Chlorides
Battery Acids
A methyl methacrylate car park deck coating system providing a colourful surface for intermediate decks.
Deckshield ID Rapide has been developed to enable very fast track applications, therefore dramatically reducing down time.
Attractive to brighten up dark car parks
Hard wearing to minimise repair costs
Protects against chemicals, fire and slips
Fast cure methyl methacrylate resin
For
a fu
ll Te
chni
cal P
rofil
e, c
onta
ct y
our
loca
l Tec
hnic
al D
epar
tmen
t.
Technical Profile
TEMPERATURE RESISTANCESoftens over 70˚C, hardens on cooling
WATER PERMEABILITYKarsten Test Nil (Impermeable)
RESISTANCE TO CHLORIDE IONSDOT BD47/94: Appendix B, Method B4,2(d).
No chloride ion penetration after 28 days
BOND STRENGTHASTM D4541 (Pull-Off Test) >1.5 MPa*
FIRE RESISTANCEEN 13501-1 Cfl - s1
SLIP RESISTANCEBS 7976-2 Dry >40, Wet dependant
on specification
SPEED OF CURE (PER LAYER)Walk On 1 hour
Full Traffic & Chemical Cure 2-3 hours
Deckshield ID Rapide
*Assumes concrete compressive strength is greater than 25N/mm2
Deckshield Rapide Bodycoat
Deckshield Oxide
Prepared Substrate
Deckshield Rapide Primer
Deckshield Rapide Topcoat
Deckshield Rapide Topcoat
Silica Quartz 0.4–0.8mm
A methyl methacrylate car park deck coating system providing a colourful watertight, hard wearing surface for exposed decks.
Deckshield ED Rapide has been developed to enable very fast track applications, therefore dramatically reducing down time.
For
a fu
ll Te
chni
cal P
rofil
e, c
onta
ct y
our
loca
l Tec
hnic
al D
epar
tmen
t.
Technical Profile
WATER PERMEABILITYKarsten Test Nil (Impermeable)
BOND STRENGTHASTM D4541 (Pull-Off Test) >1.5 MPa*
FIRE RESISTANCEEN 13501-1 Cfl - s1
SLIP RESISTANCEBS 7976-2 Dry >40, Wet dependant
on specification
ABRASION RESISTANCE (TOP COAT)Taber Abrader (1kg load using CS17 wheels)
300 mg loss per 1000 cycles
SPEED OF CURE (PER LAYER)Walk On 1 hour
Full Traffic & Chemical Cure 2-3 hours
Enhances car park’s appearance
Hard wearing to minimise repair costs
Protects against chemicals, fire and slips
Fast cure methyl methacrylate resin
Deckshield ED Rapide
*Assumes concrete compressive strength is greater than 25N/mm2
Deckshield Rapide Bodycoat
Deckshield Oxide
Prepared Substrate
Flowfast Damp Primer
Deckshield Rapide Topcoat
Deckshield Rapide Topcoat
Deckshield Rapide Membrane
Silica Quartz 0.4–0.8mm
Technical Profile
FIRE RESISTANCEEN 13501-1 Bfl - s1
SLIP RESISTANCEMethod described in BS 7976-2 (typical values for 4-S rubber slider)
Dry>40, Wet depends on specification (in accordance with HSE and UKSRG guidelines)
TEMPERATURE RESISTANCESoftens over 70°C, Hardens on cooling
CHEMICAL RESISTANCEContact Technical Department. Resistant to petrol, diesel, antifreeze, hydraulic fluid, chlorides and battery acids.
ABRASION RESISTANCEASTM D4060 (1 kg load using CS17 wheels)
0.1g loss per 1000 cycles
WATER PERMEABILITYNil - Karsten test (impermeable)
BOND STRENGTH>1.5 MPa*
UV LIGHT RESISTANCE (WITH DECKSHIELD UV WB TOPCOAT)Excellent (non-yellowing)
SPEED OF CURE 10˚C 20˚C 30˚CLight Traffic 30 hrs 18 hrs 12 hrs
Full Traffic 48 hrs 36 hrs 24 hrs
Full Chemical Cure 12 days 7 days 6 days
Deckshield LBD is a polyurethane traffic coating system that incorporates a technically advanced polyurethance based dissipating moisture barrier.
Ensures the controlled dissipation of moisture vapour at the lowest basement car park levels.
Moisture Barrier: Tolerates up to 100% relative humidity in the concrete or screed substrate.
Attractive: Brightens up dull, dark, musty car parks and suspended floors.
Hard-Wearing: Hard-wearing & abrasion resistant suitable for regular vehicle traffic.
Slip Resistant: Highly textured finish to provide a safe environment for vehicular ramp users.
Chemical Resistant: Excellent resistance to engine oil, battery acid, hydraulic fluid, fuel, etc.
*Assumes concrete compressive strength is greater than 25N/mm2
Prepared Substrate
Deckshield Oxide/Quartz
Deckshield UV (WB)
Deckshield DPM
Deckshield Finish
For
a fu
ll Te
chni
cal P
rofil
e, c
onta
ct y
our
loca
l Tec
hnic
al D
epar
tmen
t.
Deckshield LBD
*Whilst every care has been taken to ensure that the information included in this document was accurate at the time of printing, Tremco Construction Products Group APAC reserves the right to change product specifications at any time without prior notice. The photographs and colours reproduced in this publication are within the constraints of the printing process and are not to be used for matching purposes. All photographs are used for approximate representation only and may not show the actual products on offer. E&OE. A
PAC
0309
21
www.flowcreteasia.com [email protected]