deckel fp3 nc - maschinen-kistner.de2016. 7. 20. · deckel fp3 nc | empty the coolant tank . and...
TRANSCRIPT
KISTNER GmbH & Co. KG
Industriestraße 7-9 D-95349 Thurnau
Tel. (+49) 9228 987-0 [email protected] www.maschinen-kistner.de
DECKEL FP3 NC
LIST OF CONTENTS
Machine info …………………………………………………….………………………….………..…….…………………………………..…..……….
Equipment …………………………………………………………………………………………………….……..………………………………….………
Technical data ………………………………………………………………………..………….………..……………………………..….…………. Machine pictures ……………………………………………………………………….………………………………………………….……….
Transport data ………………………………………………………………………………………………………………………………….……….
3 4 5 9 11
DECKEL FP3 NC | | 2
2
MACHINE INFO
| 3
Manufacturer
Type
Year of manufacture
Control
Machine number
General overhauled
DECKEL FP3 NC |
2 Machine vices – Manufactured by WNT Model NCG Collet chuck kit
approx. 20 Tool holders Electronic handwheel Machine housing Folding head horizontal / Vertical Coolant device Drilling and milling quill User guide / Documentation Machine parameters on CD
| 4
EQUIPMENT
DECKEL FP3 NC |
| 5
TECHNICAL DATA
Work area
X-axis (longitudinal)
Y-axis (cross)
Z-Achse (vertical) a) with angular table without slatted cover b) with angular table with slatted cover c) with universal table d) with NC-rotary table
Vertical milling head
Quill
Swivel range
DECKEL FP3 NC |
| 6 DECKEL FP3 NC |
Main drive Controlled asynchronous motor
Power Speed range Speed infinitely programmable
vertical
horizontal Torque Available at the spindle (included degree of efficiency)
vertical
horizontal
| 7 DECKEL FP3 NC |
Feed drive Regulated AC motors for all axis carriage
Torque / speed X-, Y- axis
Torque / speed Z-axis
Collision protection-coupling in the Z-axis
Feed speed infinitely programmable
metric
Zoll-System
Rapids
metric
Zoll-System Measuring system Direct measuring
Resolution
4. axis
Input resolution
metric
Zoll-System
4. axis Table sliders 1 groove
Width
Screwing for table accessories
Permissible loading Tool holder Tool clamping through plate spring assembly, hydraulic release, tool holder SK 40 for tool shanks
with pull studs
| 8 DECKEL FP3 NC |
Dimensions Floor area requirements (with security area)
Machine weight, incl. angle table, vertical milling head, electrical device and control
Cabinet
Operating voltage
Power consumption
Ground floatation
MACHINE PICTURES
| 9 DECKEL FP3 NC |
| 10 DECKEL FP3 NC |
TRANSPORT DATA
| 11 DECKEL FP3 NC |
Transport weight Machine without packaging
Machine during delilvery with transport floor with box
Cabinet without packaging with packaging Transport dimensions (approx.) Machine (LxWxH)
Transport floor (LxWxH)
Transport box (LxWxH) Required width of the door (WxH) approx.
| 12 DECKEL FP3 NC |
Empty the coolant tank and disconnect from the machine
Move the cabinet from the machine. Do not disconnect the electrical connection yet, if the machine has still to be balanced.
Required tools: 2 transport logs.
Remove the tool from the
spindle.
Move down carefully the table slides and locate them
on the transport log.
Turn down the vertical milling head and screw into the
spindle bracket.
Turn the control panel to the machine and secure with
clamp from twisting
Thank you very much for your interest
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*