dd65 minimax horizontal directional drill · new astec earthpro™ series it weighs a nimble 2,600...
TRANSCRIPT
Thielemann & Jörger Tiefbautechnik GmbH
Kapellenstraße 16 77855 Achern
Fon: + 49 (0) 78 41 . 67 36 594 Fax: + 49 (0) 78 41 . 50 83 089
E-Mail: [email protected] Web: www.tj-tiefbautechnik.de
DD65 Minimax Horizontal Directional Drill
Power and versatility in a compact packageThe Astec® EarthPro™ Series DD-65 MiniMax horizontal directional drill from Astec Underground offers power and versatility in a compact package. This unit is small enough to work among obstacles in existing landscapes or in tight work areas such as against walls or buildings. This unit offers 6,000 lbs of thrust/pullback force and is capable of up to 500 ft-lbs of rotary torque, with a maximum rotary speed of 180 rpm.
New Astec EarthPro™ Series
It weighs a nimble 2,600 pounds (1179.3 kg) for minimum impact on turf and existing landscape. The patented Es!Lok system is integra-ted into the drill controls. An emergency shut down switch is located at the driller’s console.
Powered by a dependable 26-horse-power Caterpillar® C1.1 diesel engine, the DD-65 has an onboard duplex mud pump that can pump 5 gallons per minute at 650 psi. This unit features the field-proven single rack-and-pinion carriage drive. It uses 5-foot drill stem with an outside diameter of 1.75 inches and can carry up to 150 feet of pipe.
6,000 lbs (2.72 Tonnes) maximum thrust/pullback• 500 ft-lb (677.9 Nm) rotary torque• Rack and pinion carriage drive• Single multi-function joystick controls• Quick, easy set up•
Engine
Make and model Caterpillar© C1.1 Diesel
Gross Horsepower 26hp @ 2200rpm 19.4kw @ 2200rpm
Fuel Tank Capacity 10 Gal 37.9 L
Hydraulic capacity 15 Gal 56.78 L
Drive system Triple pump hydraulic system
Weight
Machine weight 2,600 lbs (approx) 1,179.3 kg (approx)
Width at tracks 35.5 in 0 .90 m
Height 59 in 1.50 m
Length 124 in 3.15 m
Note: Weight does not include pipe
Thielemann & Jörger Tiefbautechnik GmbH
Kapellenstraße 16 77855 Achern
Fon: + 49 (0) 78 41 . 67 36 594 Fax: + 49 (0) 78 41 . 50 83 089
E-Mail: [email protected] Web: www.tj-tiefbautechnik.de
DD65 Minimax Specifications
ENGINECaterpillar® C1.1 diesel• 26-hp (19.4 kw) @ 2200 RPM• Fuel capacity 10 U.S. gallons (37.9 L) •
(Eight-hour operatingcapacity)• Hydraulic capacity 15 U.S. gallons (56.78L)• Drive system: Triple pump hydraulic system •
ROTARY DRIVERotary system Direct drive, infinitely variable •
torqueRotary (high torque) 500 ft-lb (677.9 Nm)• Maximum rotary speed 150 rpm•
CARRIAGE DRIVEMaximum thrust/pullback 6,000 lb •
(2.72 Tonnes)Carriage system Rack and pinion• Carriage speed up to 150 ft/min (45.7 m/min)• Thrust frame welded, single-sided, •
heavy-duty rack
DRILLING UNITTravel system self-propelled• Flat surface speed up to 1.5 mph (2.4 km/h)• Forward and reverse• Track material Rubber• Drill angle 15.5 degrees• Wrench/clamp vise type• Hold-down system single powered hydraulic •
auger and independent rear thrust stabilizer
DRILLING FLUID PUMPOnboard mud pump Duplex pump• Output 0-5 gpm (18.9 L/m)• Maximum pressure 650 psi (44.82 bar)•
PIPE LOADERManual loaded 5-ft (1.52 m) stem. •
Onboard capacity is 150 ft (45.72 m)
DRILL PIPE (OPTIONAL)Length 5 ft (1.52 m)• Outside diameter (tube) 1.25 in (31.75 mm)• Tool joint O.D 1.75 in (44.45 mm)• Fluid course 0.31 in (7.87 mm)• Minimum bend radius 70 ft (21.34 m)•
PROTECTIVE EQUIPMENTA Zap-Alert System is standard equipment. •
Emergency shut down switch at driller’s console and tram control. The ES!LOK® exit- side lockout system is standard equipment.
APPROXIMATE WEIGHT AND DIMENSIONSApproximate operating weight — without pipe •
2,600 lbs (1,179.3 kg)Width 35.5 in (.90 m)• Height 59 in (1.50 m)• Length 124 in (3.15 m)•
Note: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable. © 2008 ASTEC UNDERGROUND. All Rights Reserved. ASTEC_DD1416_1_08