dc/ac by solar · 2018. 8. 15. · solar designed by yake solar usa, assembled in china e˚cient ,...
TRANSCRIPT
Diseñado por Yake Solar USA, Ensamblado en China. www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
Street LightingLED Street and Roadway Lighting
GAS StationLED Module Canopy Light
Road and ParkLED Module Parking and Road Lights
SOLAR
YakeBy DC/AC
LED
Introducing YakeLED DC/AC By Yake Solar
July 13 - 2015
Page 1
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
YAK�y LMSLMultiLED Street & Roadway Lights
The YAK�y LSML has a modular design to optimize the process of manufacturing and assembly, with a universal driver for all modules*, Which allow easy upgrading and acquisition SKD for local assembly. Now Yake solar presents two models the YAK�y COB and the YAK�y LMSL. The new generation of high e�ciency LED Street Lights incorporates the latest technology by using a high power light emitting diode (LED) chip, providing the best Lumens/Watt relation in the market. Also, featuring higher brightness intensity, a uniform light distribution and a better thermal management system compare to the old MultiLED technologies.
Yake Solar’s LED Street Lights, o�ers the perfect cost-e�ciency relation, providing energy savings of more than 40% compared to old HPS Lamps.* Product Highlights:• Universal driver is available in 100-240Vac, 50/60Hz, power factor > 95% and THD < 15%, IP67 waterproof.• The LED modules, The Driver and the SPD are fully interchangeable between models of lamps*.• With adjustable angle fixation of 15,10, 5, 0 , -5 degrees above/under the horizon.• Universal mounting system with a double ring 40-61mm (DE) for pole arm.• Durability and long lifespan: > 50000h @ Ta 25C (10 years approx.) • Aluminum alloy case with corrosion resistant powder paint finish.• System Close control 360 degree rotary tool-twist • High Luminous E¬fficiency of up to 115lm / W. • LED module IESNA LM80 approved.• Contain Philips LumiLED Chip LED.• Comply with IP 65 and IEC60529.• Warranty of 5 years limited.• Easy to assemble.• Maintenance free.
Applications: The YAK�y LSMLs are ideal for roads, residential areas, industrial areas, access roads and perimeters.
Note: The YAKfly LSMLs are optionally manufactured in DC configuration as well, providing energy savings over 60% compared to other alternatives on the market (like HPS, LPS, FL, INC and many others) while maintaining the same photometric and power consumption parameters.*
Views
90W 150W 270W
Safe. E�cient , Economic and
.
Page 2
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
Safe. E�cient , Economic and
.
YAK�y LMSLMultiLED Street & Roadway Lights
Features:• The LED modules, The Driver and the SPD are fully interchangeable between models of lamps*.• With adjustable angle fixation of 15,10, 5, 0 , -5 degrees above/under the horizon.• Universal mounting system with a double ring 40-61mm (DE) for pole arm.• Durability and long lifespan: > 50000h @ Ta 25C (10 years approx.) • Aluminum alloy case with corrosion resistant powder paint finish.• System Close control 360 degree rotary tool-twist • High Luminous E¬fficiency of up to 115lm / W. • LED module IESNA LM80 approved.• Contain Philips LumiLED Chip LED.• Comply with IP 65 and IEC60529.• Warranty of 5 years limited.• Easy to assemble.• Maintenance free.
Applications: The YAK�y LSMLs are ideal for roads, residential areas, industrial areas, access roads and perimeters.
Note: The YAKfly LSMLs are optionally manufactured in DC configuration as well, providing energy savings over 60% compared to other alternatives on the market (like HPS, LPS, FL, INC and many others) while maintaining the same photometric and power consumption parameters.*
Optical & Photometric
90 150 270
3 5 9
1 2 3
90W 150W 270W
9500 16000 29900
9000 15200 28400
8600 14400 27000
623mm 753mm 1013mm
369mm 369mm 369mm
118mm 118mm 118mm
705mm 885mm 1100mm
450mm 450mm 450mm
200mm 200mm 200mm
10Kg 12.5Kg 18Kg
* This only applies to the 90W Lamps
Input Voltage
Number of Drivers
Width ( W )
High ( H )
Total Product Weight
Product Dimension
Mounting Hole Size
Packing Dimension
Long ( L )
Width ( W )
High ( H )
Efficiency
GENERAL OPERATING SPECIFICATIONS
Long ( L )
Natural Light ( N )
Warm Light ( W )
Optical Type
Color Rendering Index
View Angle
Luminous Flux( Lumens)
Color Temperature
Cool Light ( C )
Natural Light ( N )
Warm Light ( W )
Cool Light ( C )
Mounting Base Angle Regulations
Working Temperature
IP Grade
Model
ELECTRICAL SPECIFICATIONS
LIGHTING SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Working Live-Span
Frequency
Harmonic Distortion (THD)
Power Factor
100VAC ~ 240VAC / 24VDC*
50HZ ~ 60HZ
< 15%
> 0,95
Number of Modules
Power
ø 40mm - ø 61mm
2MS: IESNA TIPO II
Ra >70
120
115 Lm/W
6.000K ± 300K
4.000K ± 200K
2.700K ± 100K
YAKfly LMSL
-40ºC ~ +55ºC
IP65
>50.000H
-5° to +15°
Page 3
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
YAK�y COBMultiCOB Street & Roadway Lights
The YAK�y COB has a modular design to optimize the process of manufacturing and assembly, with a universal driver for all modules*, Which allow easy upgrading and acquisition SKD for local assembly. Now Yake solar presents two models the YAK�y COB and the YAK�y LMSL.
The new generation of high e�ciency LED Street Lights incorporates the latest technology by using a high power light emitting diode (LED) chip, providing the best Lumens/Watt relation in the market. Also, featuring higher brightness intensity, a uniform light distribution and a better thermal management system compare to the old MultiLED technologies. Yake Solar’s LED Street Lights, o�ers the perfect cost-e�ciency relation, providing energy savings of more than 40% compared to old HPS Lamps.* Product Highlights:• Universal driver is available in 100-240Vac, 50/60Hz, power factor > 95% and THD < 15%, IP67 waterproof.• The LED modules, The Driver and the SPD are fully interchangeable between models of lamps*.• With adjustable angle fixation of 15,10, 5, 0 , -5 degrees above/under the horizon.• Universal mounting system with a double ring 40-61mm (DE) for pole arm. • Durability and long lifespan: > 50000h @ Ta 25C (10 years approx.) • Aluminum alloy case with corrosion resistant powder paint finish.• Comply with IP65 optics system and IEC60529.• System Close control 360 degree rotary tool-twist • High Luminous E¬fficiency of up to 120lm / W. • Contains Philips LumiLED Chip LED.• LED module IESNA LM80 approved.• Warranty of 5 years limited.• Easy to assemble.• Maintenance free.
Applications: The YAK�y COBs are ideal for roads, residential areas, industrial areas, access roads and perimeters.
Note: The YAKfly COBs are optionally manufactured in DC configuration as well, providing energy savings over 60% compared to other alternatives on the market (like HPS, LPS, FL, INC and many others) while maintaining the same photometric and power consumption parameters.*
Views
90W 135W 270W
Safe. E�cient , Economic and
.
Page 4
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
Safe. E�cient , Economic and
.
YAK�y COBMultiCOB Street & Roadway Lights
Optical & Photometric
Road side
House side
0.00.0 0.50.5 1.01.0 1.51.5 2.02.0 2.5d/h2.5d/h
[Unit:lx] Imax:6105.17cdImax:6105.17cdH=9.0m
0°
90°
±180°
-90°
1221.04
2442.07
3663.10
4884.14
6105.17
90 135 270
2 3 6
90W 135W 270W
10800 16300 32590
10400 15500 30900
9900 14700 29400
385mm 605mm 1031mm
350mm 350mm 350mm
102mm 102mm 102mm
2.6Kg 6.6Kg 14.6Kg
NOTE: Dimming Control it is Optional*
IP Grade IP65
Working Live-Span >50.000H
Quantity of Modules
GENERAL OPERATING SPECIFICATIONS YAKfly LMCL
Model
Working Temperature -40ºC ~ +70ºC
Input Voltage 100VAC ~ 240VAC / 24 VDC*
Frequency 50HZ ~ 60HZ
Power
ELECTRICAL SPECIFICATIONS
Harmonic Distortion (THD) < 20%
Natural Light ( N )
Power Factor 0,9 ~ 0,98
Efficiency 120 Lm/W
Dimming Control* 0-10V (IEC60929)
SPD 10KV/10KA (ANSI C62.41)
LIGHTING SPECIFICATIONS
Optical Type 2MS: IESNA TIPO II
Cool Light ( C )
Mounting Hole Size Ø 40 mm - Ø 61 mm
Product Weight
Mounting Base Angle Regulations -5° to +15°
Luminous Flux( Lumens)
Warm Light (W)
4.250K ± 200K
MECHANICAL SPECIFICATIONS
Product Dimension
Long ( L )
Width ( W )
High ( H )
Color Temperature
Cool Light ( C )
Warm Light (W)
View Angle 120
5.500K ± 300K
Natural Light ( N )
2.700K ± 100K
Color Rendering Index Ra > 65
Product Highlights:• Universal driver is available in 100-240Vac, 50/60Hz, power factor > 95% and THD < 15%, IP67 waterproof.• The LED modules, The Driver and the SPD are fully interchangeable between models of lamps*.• With adjustable angle fixation of 15,10, 5, 0 , -5 degrees above/under the horizon.• Universal mounting system with a double ring 40-61mm (DE) for pole arm. • Durability and long lifespan: > 50000h @ Ta 25C (10 years approx.) • Aluminum alloy case with corrosion resistant powder paint finish.• Comply with IP65 optics system and IEC60529.• System Close control 360 degree rotary tool-twist • High Luminous E¬fficiency of up to 120lm / W. • Contains Philips LumiLED Chip LED.• LED module IESNA LM80 approved.• Warranty of 5 years limited.• Easy to assemble.• Maintenance free.
Applications: The YAK�y COBs are ideal for roads, residential areas, industrial areas, access roads and perimeters.
Note: The YAKfly COBs are optionally manufactured in DC configuration as well, providing energy savings over 60% compared to other alternatives on the market (like HPS, LPS, FL, INC and many others) while maintaining the same photometric and power consumption parameters.*
Page 5
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
YAK�y MLCLMultiLED Canopy Light
Safe. E�cient , Economic and
.
The YAK�y MultiLED Canopy Light its build with an anodized extruded heat sink designed to optimize the process of heat management, with a universal driver, which allows easy upgrading and acquisition based on Knock-Down Kit (SKD) for local assembly.The new generation of high e�ciency LED Lights incorporates the latest technology by using a high power light emitting diode (LED) chip, providing the best Lumens/Watt relation in the market. Also, featuring higher brightness intensity, a uniform light distribution and a better thermal management system compared to the old MultiLED technologies.Yake Solar’s LED Lights, o�er the perfect cost-e�ciency relation, providing energy savings up to 60% compared to old HPS Lamps*. *LED vs HPS power equivalents depends on illumination standards adopted by each country.
Product Highlights:• Universal driver is available in 100-240Vac, 50/60Hz, power factor > 95% and THD < 15%, IP67 waterproof.• Optimized light distribution in both symmetry and asymmetry designs provides a better uniformity.• High tempered glass with over 90% light transmission rate of light provides protection.• Environmentally friendly: LEDs do not contain mercury unlike �uorescent lighting.• Anodized extruded heat sink design provides perfect heat management.• Durability and long lifespan: > 50,000h @ Ta 25C (10 years approx.).• Comply with IP65 optics system and IEC60529.• High Luminous Efficiency of up to 100Lm/W.• Universal driver in 100-240VAC 50/60Hz.• Tool-less assembly (Easy Assembly).• Contains Philips LumiLED Chip LED.• LED module IESNA LM80 approved.• Energy and maintenance savings.• Warranty of 5 years limited.• Maintenance free.
Applications:The Yake Solar MultiLED Canopy Lights are ideal for gas stations, residential areas, industrial areas, access roads and perimeters.
Note: Yake Solar’s MultiLED Canopy Lights are manufactured in AC con�guration, providing energy savings over 60% compared to other alternatives on the market (like HPS, LPS, FL, INC and many others) while maintaining the same photometric and power consumption parameters*.
LED & Optics
Page 6
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
Safe. E�cient , Economic and
.
YAK�y MLCLMultiLED Canopy Light
400m
m
400mm
150m
m
Optical & Photometric
S: Symmetric type
A: Asymmetric type
Color Temperature
400mm
Cool Light ( C )
Power Factor
< 20%
Efficiency
Power
Input Voltage 100VAC ~ 240VAC
50HZ ~ 60HZ
Working Temperature
IP Grade
Working Live-Span
Frequency
Harmonic Distortion (THD)
ELECTRICAL SPECIFICATIONS
LIGHTING SPECIFICATIONS
MECHANICAL SPECIFICATIONS
GENERAL OPERATING SPECIFICATIONS
Long ( L )
Natural Light ( N )
Optical Type
Color Rendering Index
Cool Light ( C )
Natural Light ( N )
Product Dimension
8550
8500Luminous Flux
( Lumens)
YAKfly MLCL
-30ºC ~ +50ºC
IP65
L70>50.000H
Ra >70
> 0,9
5.500K ± 300K
4.250K ± 250K
90W
Symmetric (S) Asymmetric (A)
8400
8350
100 Lm/W
Product Weight 8Kg
Width ( W )
High ( H )
400mm
115mm
Page 7
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
YAK�y LMCLLED Module Canopy Light
The YAK�y LED Module Canopy Lights have a modular design to optimize the process of manufacturing and assembly, with a universal driver for all modules, Which allow easy upgrading and acquisition based on Knock-Down Kit (SKD) for local assembly.The new generation of high e�ciency LED Lights incorporates the latest technology by using a high power light emitting diode (LED) chip, providing the best Lumens/Watt relation in the market. Also, featuring higher brightness intensity, and uniform light distribution and a better thermal management system compared to the old MultiLED technologies.Yake Solar’s LED Module Canopy Lights, o�er the perfect cost-e�ciency relation, providing energy savings up to 60% compared to old HPS Lamps*.*LED vs HPS power equivalents depends on illumination standards adopted by each country.
Product Highlights:• Universal driver is available in 100-240Vac, 50/60Hz, power factor > 95% and THD < 15%, IP67 waterproof.• The LED modules, the driver and the SPD are fully interchangeable between models of lamps.• Tool-less 360 degree rotatable twist-lock photocell control ANSI C136.10 compliant. (Optional)• Environmentally friendly: LEDs do not contain mercury unlike �uorescent lighting.• Durability and long lifespan: > 50,000h @ Ta 40C (10 years approx.).• 3G vibration per ANSI C136.31 bridge and overpass designed.• Comply with IP65 optics system and IEC60529.• Aluminum alloy case with powder paint finish.• High Luminous Efficiency of up to 100Lm/W.• Contains Philips LumiLED Chip LED.• LED module IESNA LM80 approved.• Energy and maintenance savings.• Warranty of 5 years limited.• Maintenance free.• Easy assembly.
Applications:The YAK�y LMCL is ideal for gas stations, residential areas, industrial areas, access roads and perimeters.
Note: The YAKfly’s LMLC are manufactured in AC configuration, providing energy savings over 60% compared to other alternatives on the market (like HPS, LPS, FL, INC and many others) while maintaining the same photometric and power consumption parameters*.
LED & Optics
75W
150W
225W
Safe. E�cient , Economic and
.
Page 8
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
Safe. E�cient , Economic and
.
YAK�y LMCLLED Module Canopy Light
Optical & Photometric
75 150 225
1 2 3
75W 150W 225W
6550 12400 19000
6450 12300 18800
290mm 395mm 505mm
420mm 420mm 420mm
150mm 150mm 150mm
10Kg 12Kg 15.5Kg
NOTE: Dimming Control it is Optional*
YAKfly LMCL
-30ºC ~ +50ºC
IP65
L70>50.000H @ 40ºC
Ra > 70
> 0,95
3M: IESNA TYPE 3M
5.500K ± 300K
4.250K ± 250K
10KV/10KA (ANSI C62.41)
Width ( W )
High ( H )
Product Weight
Product Dimension
GENERAL OPERATING SPECIFICATIONS
Long ( L )
Natural Light ( N )
Optical Type
Color Rendering Index
Cool Light ( C )
Natural Light ( N )
Model
Cool Light ( C )
Working Temperature
IP Grade
Working Live-Span
Frequency
Harmonic Distortion (THD)
Power Factor
SPD
Quantity of Modules
Luminous Flux( Lumens)
Color Temperature
ELECTRICAL SPECIFICATIONS
LIGHTING SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Power
Input Voltage
Dimming Control* 0-10V (IEC60929)
100VAC ~240VAC
50HZ ~ 60HZ
< 15%
Efficiency 100 Lm/W
Page 9
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
YAK�y LMPL LED Module Parking Light
Safe. E�cient , Economic and
.
The YAK�y LED Module Parking Lights have a modular design to optimize the process of manufacturing and assembly, with a universal driver for all modules, Which allow easy upgrading and acquisition based on Knock-Down Kit (SKD) for local assembly.
The new generation of high e�ciency LED Lights incorporates the latest technology by using a high power light emitting diode (LED) chip, providing the best Lumens/Watt relation in the market. Also, featuring higher brightness intensity, and uniform light distribution and a better thermal management system compared to the old MultiLED technologies.
Yake Solar’s LED Module Parking Lights, o�er the perfect cost-e�ciency relation, providing energy savings up to 60% compared to old HPS Lamps*.
*LED vs HPS power equivalents depends on illumination standards adopted by each country.
Product Highlights:• The LED modules, the driver and the SPD are fully interchangeable between models of lamps.• Tool-less 360 degree rotatable twist-lock photocell control ANSI C136.10 compliant. (Optional)• Environmentally friendly: LEDs do not contain mercury unlike �uorescent lighting.• High Density PC optic lens provides high uniformity and optimal light distribution.• Durability and long lifespan: > 50,000h @ Ta 40C (10 years approx.).• 3G vibration per ANSI C136.31 bridge and overpass designed.• Universal Driver available in 100-277VAC 50/60Hz.• Aluminum alloy case with powder paint finish.• High Luminous Efficiency of up to 100Lm/W.• Energy and maintenance savings.• Maintenance free.• Easy assembly.
Applications:The Yake Solar LED Module Parking Lights are ideal for industrial areas, site lighting for parking lot, playgrounds, sport areas, campuses and roads.
Note: Yake Solar’s LED Module Parking Lights are manufactured in AC configuration, providing energy savings over 60% compared to other alternatives on the market (like HPS, LPS, FL, INC and many others) while maintaining the same photometric and power consumption parameters*.*LED vs HPS power equivalents depends on illumination standards adopted by each country.
75W
150W
LED & Optics
225W
Page 10
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
Safe. E�cient , Economic and
.
YAK�y LMPL LED Module Parking Light
Product Highlights:• The LED modules, the driver and the SPD are fully interchangeable between models of lamps.• Tool-less 360 degree rotatable twist-lock photocell control ANSI C136.10 compliant. (Optional)• Environmentally friendly: LEDs do not contain mercury unlike fluorescent lighting.• High Density PC optic lens provides high uniformity and optimal light distribution.• Durability and long lifespan: > 50,000h @ Ta 40C (10 years approx.).• 3G vibration per ANSI C136.31 bridge and overpass designed.• Universal Driver available in 100-277VAC 50/60Hz.• Aluminum alloy case with powder paint finish.• High Luminous Efficiency of up to 100Lm/W.• Energy and maintenance savings.• Maintenance free.• Easy assembly.
Applications:The Yake Solar LED Module Parking Lights are ideal for industrial areas, site lighting for parking lot, playgrounds, sport areas, campuses and roads.
Note: Yake Solar’s LED Module Parking Lights are manufactured in AC configuration, providing energy savings over 60% compared to other alternatives on the market (like HPS, LPS, FL, INC and many others) while maintaining the same photometric and power consumption parameters*.*LED vs HPS power equivalents depends on illumination standards adopted by each country.
75 150 225
1 2 3
75W 150W 225W
7250 13800 211006900 13100 200506500 12450 19050
471mm 579mm 687mm420mm 420mm 420mm143mm 143mm 143mm
9Kg 11Kg 14.5Kg
NOTE: Dimming Control it is Optional*
YAKfly LMPL
-30ºC ~ +50ºCIP65
L70>50.000H @ 40ºC
Ra >70
> 0,95
3MS: IESNA TYPE 3
5.500K ± 300K4.250K ± 250K3.150K ± 100K
10KV/10KA (ANSI C62.41)
GENERAL OPERATING SPECIFICATIONS
Long ( L )
Natural Light ( N )Warm Light ( W )
Optical Type
Color Rendering Index
Luminous Flux( Lumens)
Color Temperature
Cool Light ( C )Natural Light ( N )Warm Light ( W )
Model
High ( H )Product Weight
Product Dimension
ELECTRICAL SPECIFICATIONS
LIGHTING SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Working TemperatureIP Grade
Working Live-Span
FrequencyHarmonic Distortion (THD)
Quantity of Modules
Cool Light ( C )
Power Factor
SPD
Width ( W )
PowerInput Voltage
Dimming Control* 0-10V (IEC60929)
100VAC ~277VAC50HZ ~ 60HZ
< 15%
Efficiency 100 Lm/W
Optical & Photometric
Page 11
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
YAK�y CRPL ACCOB Round Park Light
The YAK�y COBLED CRPL has a radiator with an aluminum alloy with high grade of purity that make it Self-cleaning, light weight and optimize the process of heat management and has long lifespan. Further, The YAK�y CRPL has a silicon sealer that make the lamp dustproof and waterproof. The security locks are easy removal. Also, the power supply is connected by a connector CRT making that the lamp has an easy maintenance.The new generation of high e�ciency LED Lights incorporates the latest technology by using a high power light emitting diode (LED) chip, providing the best Lumens/Watt relation in the market. Also, featuring higher brightness intensity, a uniform light distribution and a better thermal management system compared to the old MultiLED technologies.Yake Solar’s LED Lights, o�er the perfect cost-e�ciency relation, providing energy savings up to 60% compared to old HPS Lamps*.*LED vs HPS power equivalents depends on illumination standards adopted by each country.
Product Highlights:• Universal driver is available in 100-240Vac, 50/60Hz, power factor > 95% and THD < 15%, IP67 waterproof.•Environmentally friendly: LEDs do not contain mercury unlike fluorescent lighting.• Aluminum heat radiator design provides perfect heat management.• Durability and long lifespan: > 50,000h @ Ta 25C (10 years approx.).• Comply with IP65 optics system and IEC60529.• High Luminous Efficiency of up to 100Lm/W.• LED module IESNA LM80 approved.• Energy and maintenance savings.• Warranty of 5 years limited.• Bridgelux Chip LED.• Maintenance free.
Applications:The Yake Solar COBLED CRPL Lights are ideal for residential areas, industrial areas, access roads and perimeters.
Note: Yake Solar’s COBLED CRPL Lights are manufactured in AC con�guration, providing energy savings over 60% compared to other alternatives on the market (like HPS, LPS, FL, INC and many others) while maintaining the same photometric and power consumption parameters*.*LED vs HPS power equivalents depends on illumination standards adopted by each country.
LED & Optics
30W
40W
50W
Safe. E�cient , Economic and
.
Page 12
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
Safe. E�cient , Economic and
.
YAK�y CRPL ACCOB Round Park Light
Product Highlights:• Universal driver is available in 100-240Vac, 50/60Hz, power factor > 95% and THD < 15%, IP67 waterproof.• Environmentally friendly: LEDs do not contain mercury unlike fluorescent lighting.• Aluminum heat radiator design provides perfect heat management.• Durability and long lifespan: > 50,000h @ Ta 25C (10 years approx.).• Comply with IP65 optics system and IEC60529.• High Luminous Efficiency of up to 100Lm/W.• LED module IESNA LM80 approved.• Energy and maintenance savings.• Warranty of 5 years limited.• Philips LumiLED Chip LED.• Maintenance free.
Applications:The Yake Solar MultiLED CRPL Lights are ideal for residential areas, industrial areas, access roads and perimeters.
Note: Yake Solar’s MultiLED CRPL Lights are manufactured in AC configuration, providing energy savings over 60% compared to other alternatives on the market (like HPS, LPS, FL, INC and many others) while maintaining the same photometric and power consumption parameters*.*LED vs HPS power equivalents depends on illumination standards adopted by each country.
Optical & Photometric
30 40 50
30W 40W 50W
Cold Light ( C ) 3450 Lm 4600 Lm 5750 Lm
Natural Light ( N ) 3300 Lm 4400 Lm 5500 Lm
Warm Light ( W ) 3150 Lm 4200 Lm 5250 Lm
Cold Light ( C )
Natural Light ( N )
Warm Light ( W )
Long ( L )
Width ( W )
High ( H )
NOTE: Dimming Control it is Optional*
MECHANICAL SPECIFICATIONS
Product Weight
Product Dimension
752mm
450mm
249mm
7,5Kg
Color Rendering Index
Model
Lamp Efficiency
Lumen flux
LIGHTING SPECIFICATIONS
-30ºC ~ +50ºC
IP65
>50.000H
Ra > 65
> 0,95
3M: IESNA TYPE 3M
5.500K ± 300K
2.800K ± 250K
10KV/10KA (ANSI C62.41)
> 95%
SPD
Color Temperature
ELECTRICAL SPECIFICATIONS
4.250K ± 250K
GENERAL OPERATING SPECIFICATIONS
Optical Type
YAKfly CRPL
Working Temperature
IP Grade
Working Live-Span
Frequency
Harmonic Distortion (THD)
Power
Input Voltage
Dimming Control* 0-10V (IEC60929)
100VAC ~ 240VAC
50HZ ~ 60HZ
< 15%
LED Luminous Efficiency >135 Lm/W
Power Factor
Page 13
SOLAR
www.YakeSolar.comDesigned by Yake Solar USA, Assembled in China
Safe.
YAK�y Street Lights have a modular design to optimize the process of manufacturing and assembly, with a universal driver for all modules, Which allow easy upgrading and acquisition based on Knock-Down Kit (SKD) for local assembly.
Our new YakeLED series uses a new generation of high e�ciency LEDs incorporating the latest technology by using a high power light emitting diode (LED) chip or module , providing the best Lumens/Watt relation in the market. Also, featuring higher brightness intensity, and uniform light distribution and a better thermal management system compared to the old MultiLED technologies.
YakeLED series, o�er the perfect cost-e�ciency relation, providing energy savings up to 60% compared to old HPS Lamps*.
*LED vs HPS power equivalents depends on illumination standards adopted by each country.Note: YakeLED are optionally manufactured in AC con�guration as well, providing energy savings over 60% compared to other alternatives on the market (like HPS, LPS, FL, INC and many others) while maintaining the same photometric and power consumption parameters*.
Yake LED DC/AC By
SOLAR
YakeBy DC/AC
LED
Certi�cations may vary depending on each component or product line
July 13 - 2015
Page 14