dc, brushless motor series (variable speed type) model...
TRANSCRIPT
15
Features• High power brushless motor• Adjustable speed control for machine or tapping screws• Programmable three stage speed control• Bulilt-in screw counting function• Configures setting with optional remote controller• ESD(electrostatic discharge) protected housing• Detachable power code for easy maintenance
S Series (Variable speed Type) Model DLV30S/45S/70S For Machine Screws #3 - #5/16 (2.6 - 8.0 mm)
®
DLV30S06P DLV30S12P DLV30S20LDLV30S06P DLV30S12P DLV30S20L DEA0151N-AZ DEA0241N-AZ
Programmable Three Stage Speed Control Function
Built-in Screw Fastening Counter
<Step 2><Step 1>
<Step 3>High speed drive increases productivity.
• Batch counting• Fastening time monitoring, OK(Pass)/Fail(NG) decision
LEDs and Setting Buttons on the Screwdriver Part Names of the Remote Controller
Parameter LED Main LED
Workpiece LED
Mode LED Setting Buttons Setting Buttons
LCDPower Switch
Specifications
DLV30S06L-AYKDLV30S12L-AYKDLV30S20L-AYKDLV30S06P-AYKDLV30S12P-AYKDLV30S20P-AYKDLV45S06L-AYKDLV45S12L-AYKDLV45S06P-AYKDLV45S12P-AYKDLV70S06P-AYKDLV70S12P-AYK
Model StartingMethod Power Source Power
Consumption
Lever Start
Lever Start
Push to Start
Lever StartPush to Start
44 WPush to Start
Bit
Hex 1/4”
17.7 - 39.8(2.0 - 4.5)
33.6 - 62.0(3.8 - 7.0)
Torque Adjustment Lb-in(Nm)
3.5 - 14.2(0.4 - 1.6)
Low Torque Spring(Standard Accessory)
High Torque Spring(installed)
Screw Size (for reference)Weight lbs(g)
#3 - #11 2.6 - 5.0 mm
Inch Thread Metric Coarse Thread
1.57 (710)
1.85 (840)
1.90 (860)with Pistol Grip#9 - #13
#12 - #5/16”
4.5 - 6.0 mm
5.0 - 8.0 mm
10.6 - 26.6(1.2 - 3.0)
DEA0151N-A /DEA0241N-AZ
DEA0151N-A /DEA0241N-AZ
DEA0151N-A / DEA0241N-AZDEA0241N-AZ
DEA0151N-A / DEA0241N-AZ
DEA0241N-AZ
DEA0241N-AZ
DEA0241N-AZ
Setting Range of Speed and Torque (for reference only)
*Speed and torque are for reference only. The actual values depend on the fastening material and size of screws. The values are not guaranteed.
DLV30S06SpeedLevel
Speed(rpm)
Lv1Lv2Lv3Lv4Lv5Lv6Lv7Lv8Lv9
160220280340410470530590650
3.5 - 11.5 [0.4 - 1.3]3.5 - 17.7 [0.4 - 2.0]3.5 - 23.9 [0.4 - 2.7]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]
DLV45S06
Torque (Lb-in [Nm])
-17.7 - 21.2 [2.0 - 2.4]17.7 - 30.9 [2.0 - 3.5]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]
DLV70S06
- -
33.6 [3.8] 33.6 - 40.7 [3.8 - 4.6] 33.6 - 47.8 [3.8 - 5.4] 33.6 - 54.9 [3.8 - 6.2] 33.6 - 62.0 [3.8 - 7.0] 33.6 - 62.0 [3.8 - 7.0] 33.6 - 62.0 [3.8 - 7.0]
DLV30S12SpeedLevel
Speed(rpm)
Lv1Lv2Lv3Lv4Lv5Lv6Lv7Lv8Lv9
300420530640750860980
1,0901,200
3.5 - 5.3 [0.4 - 0.6]3.5 - 10.6 [0.4 - 1.2]3.5 - 15.9 [0.4 - 1.8]3.5 - 21.2 [0.4 - 2.4]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]
DLV45S12
Torque (Lb-in [Nm])
--
17.7 [2.0]17.7 - 23.0 [2.0 - 2.6]17.7 - 28.3 [2.0 - 3.2]17.7 - 33.6 [2.0 - 3.8]17.7 - 38.9 [2.0 - 4.4]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]
DLV30S20SpeedLevel
Speed(rpm)
Lv1Lv2Lv3Lv4Lv5Lv6Lv7Lv8Lv9
500690880
1,0601,2501,4401,6301,8102,000
3.5 [0.4]3.5 - 7.0 [0.4 - 0.8]
3.5 - 10.6 [0.4 - 1.2]3.5 - 14.1 [0.4 - 1.6]3.5 - 17.7 [0.4 - 2.0]3.5 - 21.2 [0.4 - 2.4]3.5 - 24.7 [0.4 - 2.8]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]
Torque (Lb-in [Nm])
DC, Brushless MotorDC, Brushless Motor
Power Supply
DEA0151N-AZDEA0241N-AZ
Model Input Ouput Maximum Rated Power100 - 240 V AC,50/60 Hz, 60 W 40 V DC
Weight lbs(g) Standard Accessory1.23 (560)1.98 (900)
150 W240 W
80” (2 m) cord withUL three-prong plug
Low speed start-up minimizes cross-threading, stripped screws.
Low speed at torque-up minimizes stripped screw and overshott torque.
16
S Series (Variable speed Type) Model DLV30S/45S/70S
Lead wire colors are the ones used in the optional signal cable ass’y DLW9090.
Pin No. Lead wire color Signal Input / outputRed
WhiteGreen
Yellow
BrownBlue
Gray
OrangePeachPurple
Yellow GreenBlack
123
4
56
7
89101112
+24 V DC power (supplied from outside)Workpiece SignalReset signal LINK-INForced stop signalOK SignalNG SignalLINK-OUTChannel switching signalTorque-up (count) signalChannel AChannel BChannel C0 V DC
InputInput
Input
OutputOutput
Output
OutputInputInputInput
*Either Pin No.4 or 7 must be selected, but not both.
Setting Range for Standard Models
*Graphs are for reference only. The actual values depend on usage conditions.
The low speed level is effective in hard-to-fasten applications such as tapped holes in sheet metal, stainless steel, and plastic.The high speed level is effective in shortening the cycle time in an assembly line.
Equipped with the External Signal ConnectorThe screwdriver can accept an external signal or output a signal externally through the external signal connector.
98
7
654
3
21
10
1211
Optional AccessoriesRemote ControllerRC1000
Standard Accessories
Signal Cable Ass’yDLW9090 (3 m)
Connection CordDLW9073 (1.5 m)
Relay Cord(To connect DLW9073 and DLW9073)DLW9074
*Standard accessory of screwdrivers
(Nm)
®
For DLV30S
. Bit NK35 x 2 x 7 x75
. Suspension Bail
. Low Torque Spring
. Connection Cord (DLW9073)
For DLV45S DLV70S
. Bit NK35 x 2 x 7 x75
. Suspension Bail
. Connection Cord (DLW9073)
. Pistol Grip (DLW2300ESD)
70.8
62.0
53.1
44.2
35.4
26.6
17.7
8.8
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
21 43 65 7 8 9
DLV45S
DLV70S
DLV45S
DLV70S
DLV30SLow Torque Spring
DLV30SHigh Torque Spring
Torque Diagrams(for reference)
Torque Scale
Bit Torque (Lb-in)
200 400 600 800 1000 1200 1400 1600 1800 2000 2200
70.8
62.0
53.1
44.2
35.4
26.6
17.7
8.8
0
DLV30S06
DLV45S06
DLV70S06
DLV30S12
DLV45S12
DLV30S20
Speed (min-1)
Bit Torque (Lb-in)