davey portable pumps - darley · npt discharges options ... ra1013/ 4320-01-390-8214 125 gpm fuel...
TRANSCRIPT
296 1.800.323.0244 | www.edarley.com/pumps
PUMPS
The Affordable, Portable, Engine-Driven Self-Priming PumpsThe Darley® Davey pumps, also known as the “affordable portables” are the most economicalchoice in portable, high-efficiency pumps. Their compact design makes them ideal for avariety of applications such as firefighting, tank filling and water transfers.
PUMP DESIGN FEATURES
5.5 HP AND 6.5 HP SINGLE-STAGE5.5 HP Honda and 6.5 HP Briggs & StrattonOHV Vanguard with recoil rope startWeighs approx. 49 lbs.
13 HP TWO-STAGE13.0 HP Honda and Briggs & Stratton with electric start & recoil rope startWeighs approx. 92 lbs.
OPTIONAL ROLL CAGE
5.5 HP AND 6.5 HP TWO-STAGE
9 HP AND 10 HP TWO-STAGE
PERFORMANCE95 gpm (378 L/M) @ 39 psi (2.7 bar)60 gpm (227 L/M) @ 70 psi (4.8 bar)
20 gpm (76 L/M) @ 90 psi (6.2 bar)
PERFORMANCE
AK304 5.5 HP Honda OHV with Recoil Rope Start $1,500.00AK300 6.5 HP Briggs & Stratton OHV Vanguard $1,580.00
PERFORMANCE120 gpm (454 L/M) @ 36 psi (2.5 bar)95 gpm (378 L/M) @ 83 psi (5.7 bar)60 gpm (227 L/M) @ 118 psi (8.1 bar)20 gpm (76 L/M) @ 144 psi (9.9 bar)
9.0 HP Honda and 10.0 HP Briggs & Stratton OHV Vanguard or Yanmar Diesel all with electric start & recoil rope startWeighs approx. 80 lbs.
PERFORMANCE120 gpm (454 L/M) @ 40 psi (2.8 bar)95 gpm (378 L/M) @ 108 psi (7.4 bar)60 gpm (227 L/M) @ 133 psi (9.2 bar)20 gpm (76 L/M) @ 146 psi (10.0 bar)
Davey Portable Pumps
5.5 HP Single-Stage
6.5 HPTwo-Stage
5.5 HP Honda and 6.5 HP Briggs & StrattonOHV Vanguard with recoil rope startWeighs approx. 60 lbs.
AK305 13.0 HP Briggs & Stratton $2,930.00AK306 13.0 HP Honda Two-Stage $3,230.00
AK302 5.5 HP Honda OHV with Recoil Rope Start $1,280.00AK312 6.5 HP Briggs & Stratton OHV Vanguard with Recoil Rope Start $1,290.00
AK308 9.0 HP Honda Two-Stage $2,910.00AK301 10.0 HP Briggs & Stratton OHV Vanguard $2,550.00AK313 10.0 HP Yanmar Diesel Two-Stage $5,030.00
Pre-drilled powder-coated roll cage with battery tray fits 6.5-13 HP gasoline-driven DaveyFirefighter pumps. Dimensions: 30"x19"x21".
AK310
Marine-grade aluminum casing3-Way discharge port with1 - 1/2" NPTM, 2 - 1" NPTM11/2" NPTM suctionZinc-plated casing boltsMechanical shaft sealNitrile rubber seal and casing “O” ringsSelf-priming up to 19'Easy installationCompact & lightweightHigh pumping efficiency Low oil protection Spark arrestor/exhauster diverter
A B C D E 17.5" 15.3" 15.3" 6.7" 11.7" 20.1" 15.3" 14.8" 6.7" 11.7" 20.3" 15.3" 15.3" 6.7" 11.7" 23.8" 15.3" 15.6" 6.7" 11.7" 21.4" 17.7" 17.1" 7.5" 12.6" 22" 17.7" 16.8" 7.5" 12.6" 25" 19.5" 18.5" 7.9" 13"
22.9" 18.7" 18.0" 7.5" 12.6" 22.4" 17.5" 17.9" 7.5" 12.6"
Cat#AK302AK312AK304AK300AK308AK301AK313AK305AK306
AK310 Optional Pump Roll Cage with Battery Tray $482.00
BE078 Automatic Pressure Relief Valve kit $145.00
BE078
65 gpm (246 L/M) @ 48 psi (3.3 bar)50 gpm (189 L/M) @ 81 psi (5.6 bar)
20 gpm (76 L/M) @ 120 psi (9.0 bar)
Email your inquiries [email protected]
10 HPTwo-Stage
13 HPTwo-Stage
Darley Marine Portable Pumps
297
FeaturesHorizontal shaft6.5 HP (4.8kW 3600 rpm) maxTorque 1.35kg-m/2,500 rpmTransistorized pointless ignition systemRecoil starting systemFuel tank capacity 6 qt.Dual silent air cleaner2011 Carb and EPA Compliant
2BE 6.5H 6.5 HP Honda Portable Pump $5,350.002BE 6.5HCG Coast Guard P6 NSN 4320-01-470-5515 $6,440.00
2BE 21H Performance380 gpm @ 25 psi150 gpm @ 115 psi100 gpm @ 135 psi
2BE 21H Marine 6.5 HP Honda Portable Pump $8,870.00
FeaturesShips complete with aluminum 6061 T6 frameMounted panelJet coated exhaustPainted engine316 stainless shaftHard anodized pump casing3" NPTF suction1-21/2" or 2-11/2" NPT discharge
OptionsGauge, battery, adapters and capsContact Darley for Coast Guard model specifications
Engine2BE10YDNL100: 4 cycle, 10 HP, air-cooled, 1 cylinder,recoil rope start back-up, optional 12 volt electric start and alternator
Dimensions & Weight24"L x 24"W x 23"H163 lbs. (74 kg)
ApplicationsMarineDewateringTransfer and supply
ApplicationsMarineDewateringTransfer and supply
UsesVolume
FeaturesAnodized aluminum alloy casing Discharge headEngine adapterBronze impeller and wear rings
2BE 6.5H Performance1275 gpm @ 12 psi175 gpm @ 28 psi100 gpm @ 45 psi
MADE IN
USA
10HP Diesel Portable Pump2BE 10YD & 2BE 10YDN (Navy P100) NSN 4320-01-470-5515
6.5 HP Portable Pump2BE 6.5 & 2BE 6.5H HCG Pump (U.S. Coast Guard P6)NSN 4320-01-470-5515
21 HP Portable Pump2BE 21H
3" cam lock suction3" cam lock discharge
OptionsDischarge hoseContainer and coverAdaptersSuction hose with strainerContact Darley for Coast Guard model specifications
EngineHonda Model GX630: 4-cycle, V-twin, OHV, 37.7 cu. in. displacement,12-volt starter, 17 amp regulated alternator, 21 HP,replaceable oil filter, recoil rope start back-up
Dimensions & Weight25.5"L x 16"W x 23.75"H190 lbs. (86 kg)
ApplicationsBooster tank fillMultiple hand linesWildland/attack fire suppression
UsesVolume
Choice of the U.S. Coast GuardEngine
Honda Model GX200:Air-cooled, 4 stroke, OHV, single cylinder, 6.5 HP, recoil rope start back-up
Dimensions & Weight18"L x 16"W x 19"H49 lbs. (22 kg)
ApplicationsDewateringLight duty brush truckTransfer and supply
UsesMedium pressureHigh volumeDirect driveEngine mounted
2BE 10YDN Performance250 gpm @ 25 psi180 gpm @ 60 psi95 gpm @ 90 psi
Stainless steel impeller shaftShredded plastallic packingDischarge check valveAdjustable discharge valveThrottleRoll cageExhaust primer3" NPT suction1-21/2" NPT or 2-11/2" NPT discharges
OptionsAdapters and capsElectric startMechanical seal
2BE 10YD 10 HP Yanmar Diesel Portable Pump $8,360.002BE 10YDN Navy P100 NSN 3H 4320-01-387-2869 $13,360.00
Available WithHigh Pressure
www.edarley.com/pumps | 1.800.323.0244
PUMPS
298
Ohler Pumps
Model / NSN Description Price150AAMCFP-1B30CS / 4320-01-547-8729 150 gpm Fuel Transfer Pump with Electric Start Option (Portable) $7,690.00150AAMCWP-1B30 / 4320-01-547-8734 150 gpm Potable Water Transfer Pump (Portable) $6,385.00RA1029 / 4320-01-259-4407 125 gpm Water Transfer Pump (Portable) $7,273.00RA1013 / 4320-01-390-8214 125 gpm Fuel Transfer Pump (Portable) $7,307.00AFPS-6315-24VDC / 4320-01-247-2633 DC Motor-Driven Fuel Transfer Pump with Accessories Package $5,775.00
FeaturesFuel transfer with electric start Potable water transfer Water transfer Pump case, inlet flange, volute, impeller, and wear plate are sand cast aluminum and heat-treatedShaft extension and metal seal components constructed of stainless steel
Portable Pumps
Anodized aluminum quick couplingsAir-cooled, single cylinder, 4-stroke diesel engineSelf lubricating mechanical shaft seal6.1 horsepower (continuous) at 3,600 rpmFuel capacity of 2.5 hours of operation at rated load
1.800.323.0244 | www.edarley.com/pumps
PUMPS
150AAMCFP-1B30CS
10.5 & 11 HP Floating PumpsHEF 10.5BS Dolphin™ & HEF 11H Dolphin™
1-1/4AGE 13V-Twin 13 HP Portable Pump $5,200.001-1/2AGE 13V-Twin 13 HP Portable Pump $5,370.002BE 13V-Twin 13 HP Portable Pump $4,650.00
MADE IN
USA
UsesHigh volumeSelf priming
FeaturesHard anodized aluminum alloy pump casingBronze impeller4" screened suction inlet21/2" NH discharge11 HP: 2011 Carb CompliantHigh-density polyethylene filled with closed-cell polyurethane foamFour built-in carrying handles
Works In As LittleAs 6" Of WaterHEF 10.5BS Performance
390 gpm @ 20 psi250 gpm @ 40 psi200 gpm @ 45 psi100 gpm @ 60 psi
HEF 10.5BS Dolphin™ 10.5 HP Floating Pump $3,060.00HEF 11H Dolphin™ 11 HP Floating Pump $3,180.00
EngineHEF 10.5BS: Briggs & Stratton, 10.5 HP single cylinder, 4 cycle, 2 qt. fuel tank, recoil rope startHEF 11H: Honda GVX390, OHV engine 3/4 gallon fuel tank, recoil rope start
Dimensions & Weight33"L x 30"W x 20"HHEF 10.5BS: 110 lbs. (50 kg)HEF 11H: 120 lbs. (54 kg)
ApplicationsBooster tank fillTransfer and supply
2BE 13V-Twin
13 HP Portable Pumps1-1/4AGE 13V-Twin, 1-1/2AGE 13V-Twin & 2BE 13V-Twin
1-1/4AGE 13V-Twin: Adjustable throttle, 11/2" NPT suction, 2-11/2" NPT discharges1-1/2AGE 13V-Twin: Adjustable throttle, 2" NPT suction, 2-11/2"or 1-21/2" NPT discharge2BE 13V-Twin: 3" NPT suction, 21/2" NPT discharge
1-1/4AGE 13V-Twin Performance60 gpm @ 170 psi40 gpm @ 230 psi20 gpm @ 275 psi
1-1/2AGE 13V-Twin Performance120 gpm @ 80 psi100 gpm @ 110 psi20 gpm @ 185 psi
2BE 13V-Twin Performance300 gpm @ 15 psi150 gpm @ 75 psi80 gpm @ 100 psi
EngineBriggs & Stratton, 13 HP V-twin, 8.35 qt. fuel tank, 12-volt starter, 16 amp alternator, recoil rope start back-up
Dimensions & Weight27"L x 21"W x 23"H145 lbs. (66 kg)
ApplicationsLight duty brush trucksBooster tank fillTransfer and supply
UsesEngine mounted1-1/4AGE 13V-Twin: High press., low vol., gear driven1-1/2AGE 13V-Twin: Med. press., med. vol., gear driven2BE 13V-Twin: Med. press., high vol., direct drive
FeaturesExhaust primer, bronze impeller and wear ringsStainless steel shaftDischarge head with check valveBase with fold away carrying handlesAluminum alloy gear case and engine adapterHeat treated alloy steel helical gears
Darley Portable Pumps
299www.edarley.com/pumps | 1.800.323.0244
18 HP Portable Pump1-1/4AGE 18V, 1-1/2AGE 18V, 2BE 18V & HE 18V
MADE IN
USA
1-1/2AGE 21H 21 HP Portable Pump $6,230.002BE 21H 21 HP Portable Pump $6,400.00HE 21H 21 HP Portable Pump Assembly #1/$7,370.00
Assembly #2/$7,780.00Assembly #1/$8,580.00
EngineBriggs & Stratton: 4 cycle, 18 HP, V-twin, OHV, replaceable oil filter, 8.35 qt. fuel tank, 34.75 cu. in. displacement, 12-volt starter, recoil rope start back-up, 16 amp regulated alternator
Dimensions & Weight27"L x 21"W x 25"H145 lbs. (66 kg)HE 18V: 215 lbs. (98 kg)
ApplicationsBooster reelMultiple hand linesTransfer and supplyWildland/attack fire suppression
2BE 21H shown withoptions
HE 21H
21 HP Portable Pump1-1/2AGE 21H, 2BE 21H & HE 21H
UsesEngine mounted1-1/4AGE 18V: High press., low vol., gear driven1-1/2AGE 18V: High press., med. vol., gear driven2BE 18V: Med. press., high vol., direct driveHE 18V: Low press., high vol., direct drive
Also Available in 10 & 13 HP and withBriggs Vanguard
Mechanical sealAdjustable throttle1-1/2AGE 21H: 2" NPT suction, 2-11/2" or 1-21/2" NPT discharge2BE 21H: 3" NPT suction, 1-21/2" & 2-11/2" or 1-21/2" NPT dischargeHE 21H: Assembly #1 - 4" NPT suction, 3" NPT dischargeAssembly #2 - 4" NH suction and screen, 1-21/2" and 2-11/2" NPT discharge headAssembly #3 - 4" NH suction and screen, 2-21/2" NH discharges, 1/4 turn, ball, self-locking, bronze valvesCall for additional options
EngineHonda GX 630: 4 cycle, 21 HP, V-twin, OHV, replaceable oil filter, 38.5 cu. in. displacement, 12-volt starter, 20 amp regulated alternator, 6 gal. fuel tank, hose and adapter
Dimensions & Weight1-1/2AGE 21H: 24"L x 27"Wx 23"H, 145 lbs. (66 kg)2BE 21H: 24"L x 27"W x 22"H, 190 lbs. (86 kg)HE 21H: 24"L x 27"W x 23"H, 215 lbs. (98 kg)
ApplicationsBooster reelMultiple hand linesTransfer and supplyWildland/attack fire suppression
UsesEngine mounted1-1/2AGE 21H: High press., low. vol., gear driven2BE 21H: Med. press., high vol., direct driveHE 21H: Low press., high vol., direct drive
FeaturesAluminum alloy casing Bronze impeller and wear ringStainless steel impeller shaft
1-1/2AGE 21H Performance120 gpm @ 155 psi75 gpm @ 230 psi35 gpm @ 300 psi
2BE 21H Performance380 gpm @ 25 psi150 gpm @ 115 psi100 gpm @ 135 psiHE 21H Performance
535 gpm @ 20 psi320 gpm @ 60 psi100 gpm @ 70 psi
1-1/4AGE 18V Performance60 gpm @ 230 psi40 gpm @ 315 psi20 gpm @ 360 psi
1-1/2AGE 18V Performance120 gpm @ 130 psi100 gpm @ 170 psi50 gpm @ 250 psi
2BE 18V Performance375 gpm @ 25 psi300 gpm @ 45 psi100 gpm @ 140 psiHE 13V Performance
520 gpm @ 15 psi300 gpm @ 55 psi100 gpm @ 70 psi
1-1/4AGE 18V 18 HP Portable Pump $6,090.001-1/2AGE 18V 18 HP Portable Pump $6,080.002BE 18V 18 HP Portable Pump $5,740.00HE 18V 18 HP Portable Pump Assembly #1/$6,550.00
Assembly #2/$6,760.00Assembly #3/$7,580.00
2BE 18V
FeaturesBronze impeller and seal ringStainless steel impeller shaftMechanical sealBuilt-in discharge check valveAdjustable discharge valveAluminum alloy casing and discharge valveExhaust primer1-1/4AGE 18V: 11/2" NPT suction, 2-11/2" or 1-21/2" NPT discharges1-1/2AGE 18V: 2" NPT suction, 2-11/2" or 1-21/2" NPT discharge2BE 18V: 3" NPT suction, 2-11/2" or 1-21/2" NPT dischargeHE 18V: Assembly #1 - 4" NPT suction, 3" NPT discharge,Assembly #2 - 4" NH suction and screen, 1-21/2" and 2-11/2"NPT dischargeAssembly #3 - 4" NH suction and screen, 1-21/2" and 2-11/2" NPT discharge
PUMPS
EngineBriggs & Stratton Vanguard:4 cycle, 23 HP, V-twin, OHV, replaceable oil filter, 12-volt starter, recoil rope start back-up, 16 amp regulated alternator, 6 gal. fuel tank, hose and adapter
Dimensions & Weight1-1/2AGE 23V: 24"L x 21"Wx 24"H, 180 lbs. (82 kg)2-1/2AGE 23V: 24"L x 21"Wx 24"H, 190 lbs. (86 kg)2BE 23V: 24"L x 21"W x 24"H, 195 lbs. (89 kg)HE 23V: 24"L x 21"W x 24"H, 220 lbs. (100 kg)
ApplicationsBooster tank fillMultiple hand linesWildland/attack fire supp.
UsesEngine mounted1-1/2AGE 23V: High press., med. vol., gear driven2-1/2AGE 23V: High press., high vol., gear driven2BE 23V: Med. press., high vol., direct driveHE 23V: Med press., high vol., direct drive
2BE 23V
Darley Portable Pumps
300 1.800.323.0244 | www.edarley.com/pumps
PUMPS
MADE IN
USA
23 HP Portable Pump1-1/2AGE 23V, 2-1/2AGE 23V, 2BE 23V & HE 23V
1-1/2AGE 23V 23 HP Portable Pump $6,320.002-1/2AGE 23V 23 HP Portable Pump $6,450.002BE 23V 23 HP Portable Pump $6,260.00HE 23V 23 HP Portable Pump Assembly #1/$6,870.00
Assembly #2/$7,360.00Assembly #3/$7,930.00
HE 23V Performance535 gpm @ 20 psi300 gpm @ 60 psi100 gpm @ 70 psi
2BE 23V Performance390 gpm @ 30 psi200 gpm @ 110 psi100 gpm @ 140 psi
2-1/2AGE 23V Performance290 gpm @ 45 psi100 gpm @ 135 psi50 gpm @ 175 psi
1-1/2AGE 23V Performance120 gpm @ 145 psi50 gpm @ 255 psi20 gpm @ 265 psi
FeaturesHard anodized aluminum alloy casing and discharge valveSulfuric anodized aluminum alloy gear case and engine adapterBronze impeller and wear ringMechanical sealHeat treated alloy steel helical gearsBall bearing construction pump and engineBuilt-in discharge check valveAdjustable discharge valveFold-away carrying handles1-1/2AGE 23V: 2" NPT suction, 2-11/2" NPT discharge2-1/2AGE 23V: 21/2" NPT suction, 2-11/2" and 1-21/2" NPT discharge2BE 23V: 3" NPT suction, 2-11/2" & 1-21/2" NPT dischargeHE 23V: Assembly #1 - 4" NPT suction, 3" NPT dischargeAssembly #2 - 4" NH suction, 1-21/2" and 2-11/2" NPT dischargeAssembly #3 - 4" NH suction, 2-21/2" NH valves2-year engine, lifetimeignition warrantyCall for additional options
35 HP Portable Pump2-1/2AGE 35V
EngineBriggs & Stratton: 4 cycle, 35 HP, V-twin, OHV, air cooled gas engine, electric start, flywheel alternator, fuel and oil pump filters, 6 gal. fuel tank
Dimensions & Weight28"L x 27"W x 31"H205 lbs. (93 kg)
ApplicationsBooster ReelBooster Tank FillMultiple Hand LinesWildland/Attack Fire Supp.
UsesMed. press., high vol., geardriven, engine mounted
FeaturesAnodized aluminum gear casing, discharge head, gear case and engine adapterBronze impeller and wear ringsStainless steel impeller shaftMechanical sealHelical gearsDischarge check valveAdjustable discharge valveSulfuric anodized aluminum alloy gear case and engine adapterThrottle and exhaust primer
Control panel:Mounted with engine controls and pressure gauge21/2" NPT suction2-11/2" and 1-21/2" NPT discharges
OptionsGuage, battery, adapters and caps
2-1/2AGE 35V Performance300 gpm @ 100 psi200 gpm @ 150 psi50 gpm @ 265 psi
Available As An HGE High Flow
2-1/2AGE 35V 35 HP Briggs & Stratton Portable Pump $8,310.00
35 HP Portable PumpHGE 35VEngine
Briggs & Stratton: 4 cycle, 35 HP, V-twin, OHV, air cooled gas engine, electric start, flywheel alternator, fuel and oil pump filters, 6 gal. fuel tank
Dimensions & Weight29.5"L x 27"W x 31"H330 lbs. (150 kg)
ApplicationsBooster ReelBooster Tank FillMultiple Hand LinesWildland/Attack Fire Supp.
UsesMed. press., high vol., geardriven, engine mounted
FeaturesAnodized aluminum alloy casing, discharge head, gear case and engine adapterBronze impeller and wear ringsStainless steel impeller shaftMechanical sealHelical gearsDischarge check valveAdjustable discharge valveSulfuric anodized alum. alloy gear case and engine adapterThrottle and exhaust primerControl panel: Mounted with engine controls and pressure gaugeAssembly #1 - 4" NPT suction, 3" NPT dischargeAssembly #2 - 4" NH suction, 1-21/2" and 2-11/2" NPT dischargeAssembly #3 - 4" NH suction, 2-21/2" NH discharge valves
Portable
Darley Portable Pumps
HE 64RS Hercules(Skid Mounted Shown)
301
MADE IN
USA
HGE 35V 35 HP Air Cooled Portable Pump Assembly #1/$8,910.00Assembly #2/$9,530.00
Assembly #3/$10,130.00
HGE 35V Performance500 gpm @ 50 psi300 gpm @ 105 psi100 gpm @ 170 psi
HE 64RP Performance575 gpm @ 100 psi320 gpm @ 200 psi165 gpm @ 165 psi
OptionsGuage, battery, adapters and caps
64 HP Portable PumpHE 64RP Hercules & HE 64RS Hercules
EngineRotax 582: 2 cylinder, 2-cycle, 64 HP, liquid-cooled, 12-volt electric start and recoil rope start back-up, 6 gal. fuel tank, hose and adapter
Dimensions & Weight34"L x 30"W x 26"H225 lbs. (102 kg)
ApplicationsBooster Tank FillTransfer and supplyMultiple Hand LinesWildland/Attack Fire Supp.
UsesUltra high performance
Marine VersionAvailable
Features170W lighting and recharging coilAluminum alloy casingBronze impeller and seal ringStainless steel impeller shaftMechanical sealBelt driven rotary primerHeat exchanger with thermalprotection circuitWraparound frame with fold out handlesLoss of prime shutdownPressure governorVernier throttle4" NH suction, 2-1/4" turn self-locking 21/2" NH discharge ball valves with capsAvailable with wheelsCall for additional options
HE 64RP 64 HP Hercules Portable Pump $19,250.00HE 64RS 64 HP Hercules Skid Mounted Pump (Call for details) $17,700.00
www.edarley.com/pumps | 1.800.323.0244
PUMPS
EngineKubota D902 Diesel:24 HP, 3600 rpm, liquid cooled diesel, replaceable oil filter, replaceable fuel filter, 12-volt starter
Dimensions & Weight1-1/2AGE 24K: 36"L x 22"W x 26"H, 371 lbs. (168 kg)2BE 24K: 35"L x 23.3"W x 26.3"H (40" w/exhaust), 386 lbs. (175 kg)
ApplicationsBooster reelMultiple hand linesTransfer and supplyWildland/attack fire suppression
UsesEngine mounted, gear driven1-1/2AGE 24K: High press., high vol.2BE 24K: Med. press., high vol.
FeaturesHard anodized aluminum alloy casingBronze impeller and seal ringStainless steel impeller shaftSilicon carbide mechanical sealBall bearing constructionAdjustable throttle1-1/2AGE 24K: 2" NPT suction, 2-11/2" or 1-21/2" NPT discharge2BE 24K: 3" NPT suction, 2-11/2" and 1-21/2" NPT discharge
OptionsDual panelsElectric and manual throttlesRotary vane primer
302 1.800.323.0244 | www.edarley.com/pumps
Darley Portable PumpsPU
MPS
MADE IN
USA
24 HP Portable Pumps1-1/2AGE 24K & 2BE 24K
1-1/2AGE 39K 39 HP Liquid-Cooled Portable Pump $14,710.002-1/2AGE 39K 39 HP Liquid-Cooled Portable Pump $14,690.00
FeaturesAluminum alloy casing and discharge valveSulfuric anodized aluminum alloy gear caseBronze impeller and wear ringsStainless steel impeller shaftHeat treated alloy steel helical gearsBall bearing constructionAdjustable throttle1-1/2AGE 39K: 2" NPT suction, 2-11/2" or 1-21/2" NPT discharge2-1/2AGE 39K: 21/2" NPT suction, 1-21/2" or 2-11/2" NPT discharge
1-1/2AGE 39K Performance25 gpm @ 300 psi80 gpm @ 310 psi160 gpm @ 245 psi
2-1/2AGE 39K Performance50 gpm @ 180 psi150 gpm @ 170 psi320 gpm @ 100 psi
1-1/2AGE 24K Performance25 gpm @ 335 psi75 gpm @ 220 psi120 gpm @ 130 psi
Max pressure 400 psi2-1/2AGE 24K Performance
200 gpm @ 115 psi300 gpm @ 80 psi390 gpm @ 20 psi
2BE 24K
1-1/2AGE 24K 24 HP Portable Pump $13,940.002BE 24K 24 HP Portable Pump $13,580.00
Optional dual panels
39 HP Portable Pumps1-1/2AGE 39K & 2-1/2AGE 39K
EngineKubota V1505 Diesel: 39 HP naturally aspirated, 4 cylinders, liquid-cooled, 12-volt, electric start, 40 amp alternator, pressure lubed, oil and fuel pump filters
Dimensions & Weight1-1/2AGE 39K: 41"L x 24"Wx 42.5"H, 523 lbs. (237 kg)2-1/2AGE 39K: 41"L x 24"W x 42.5"H (40" with exhaust), 528 lbs. (240 kg)
ApplicationsBooster reelMultiple hand linesTransfer and supplyWildland/attack fire suppression
UsesEngine mounted, gear driven1-1/2AGE 39K: High press., low vol.2-1/2AGE 39K: High press., med vol.
OptionsDual panelsElectric and manual throttlesRotary vane primer
1-1/2 AGE 39K
2-1/2 AGE 39K
EngineKubota V2403M Diesel:59 HP turbo, 4 cycle, liquid cooled, mounted engine control panel
Dimensions & Weight50"L x 22"W x 40"H886 lbs. (402 kg)
ApplicationsMeets 250 gpm @ 150 psi for Type 2 Structure engines Meets 150 gpm @ 250 psi for Type 3 Wildland engines
FeaturesStainless steel shaft Aluminum alloy gear case and engine adapter Heat treated alloy steel helical gears Mechanical seal4" NPT suction3" NPT discharge companion flangeCall for options
HSE 250K 59 HP Diesel Portable Pump $18,730.00
HSE 250K Performance360 gpm @ 150 psi250 gpm @ 200 psi175 gpm @ 255 psi125 gpm @ 294 psi
Darley Diesel Pumps42 HP Diesel Kubota1-1/2AGE 42K, 2-1/2AGE 42K & HE 42K
303www.edarley.com/pumps | 1.800.323.0244
PUMPS
MADE IN
USA
1-1/2AGE 42K 42 HP Portable Pump $15,030.002-1/2AGE 42K 42 HP Portable Pump $15,010.00HE 42K 42 HP Portable Pump Assembly #1/$15,010.00
Assembly #2/$15,630.00Assembly #3/$16,250.00
59 HP Diesel Portable PumpHSE 250KSingle Stage, Centrifugal, Direct Engine Mount
NFPA Rated250 GPM
1-1/2AGE 42K
HE 42K
2-1/2AGE 42K Performance275 gpm @ 160 psi175 gpm @ 215 psi75 gpm @ 230 psi
HE 42K Performance600 gpm @ 40 psi
300 gpm @ 135 psi250 gpm @ 150 psi
1-1/2AGE 42K Performance115 gpm @ 230 psi75 gpm @ 285 psi25 gpm @ 295 psi
EngineKubota V1505 Diesel: 42 HP turbo diesel, 4 cylinders, liquid-cooled, 12-volt, electric start, 40 amp alternator, pressure lubed, oil and fuel pump filters
Dimensions & Weight1-1/2AGE 42K: 41"L x 24"Wx 42.5"H, 523 lbs. (237 kg)2-1/2AGE 42K: 41"L x 24"W x 42.5"H, 528 lbs. (240 kg)HE 42K: 37"L x 20"W x 31"H, 490 lbs. (222 kg)
ApplicationsBooster reelMultiple hand linesWildland/attack fire supp.HE 42K: Dewatering
UsesEngine mounted, gear driven1-1/2AGE 42K: High press., med vol.2-1/2AGE 42K: Med. press., med vol.HE 42K: Med. press., high vol.
FeaturesAluminum alloy casing and discharge valveSulfuric anodized aluminum alloy gear caseBronze impeller and wear ringsStainless steel impeller shaftHeat treated alloy steel helical gearsBall bearing constructionAdjustable throttle1-1/2AGE 42K: 2" NPT suction, 2-11/2" or 1-21/2" NPT discharge2-1/2AGE 42K: 2-1/2" NPT suction, 1-21/2" or 2-11/2" NPT dischargeHE 42K: Assembly #1 - 4" NPT suction, 3" NPT dischargeAssembly #2 - 4" NH suction and screen, 1-21/2" and 2-11/2" NPT discharge head and check valveAssembly #3 - 4" NH suction and screen, 2-21/2" NH discharges, 1/4 turn, ball, self-locking, all bronze valvesCall for options
Darley skid-mounted and trailer-mounted pumps offer versatile pumping protection ranging from a basic pump end through a fullyengineered turn-key system. A wide variety of pump and engine combinations are available. Though all units come standard with anengine control panel with throttle making the unit operable, Darley®
can provide units with custom pump control panels including traditional master gauges and relief valve or with Darley® ergonomicAuto Control Governor.
HE500/Isuzu 4BD1
Darley Skid/Trailer Mounted Pumps
Contact Darley Today For a Copy of Our Complete Pump Catalog
304 1.800.323.0244 | www.edarley.com/pumps
PUM
PSMADE IN
USA
Pump PerformanceRatings from 250 gpm through 1500 gpm UL
Pump ModelsHE 500, KSE 750, LSE 1000, PSE 1000-1500
EnginesCummins, John Deere, Deutz, Isuzu, GMC
TrailersSingle or double axle, tongue jack, rear stabilizers, 2" ball
MountingsCross-mount, skid or trailer mounted styles are available
Optional Accessories IncludeCustom control panels12v primersRelief valvesTrailersGas and diesel modelsStorage containersSuction hose troughs with straps and foot loops Fuel tanksSuction and discharge hose with nozzles
ApplicationsIndustrial Rural
Engineering Requirements Contact the Darley Engineering Department at 800-634-7812 for quotes, proper engine horsepowerand RPM requirements.
Trailer-mountedengine driven pump
Large Variety of
Marine Drives for
Fire Boats Available
1-1/2AG
Darley PTO Pumps
305
MADE IN
USA
Assembly #1
HM 250, 350, 500 PTO Pump
Assembly #2
Assembly #3
ApplicationsMini pumperTankerWildland/attack fire
UsesSingle stageCentrifugal
FeaturesVertically split, cast iron, bronze fitted pump casingImpeller seal ring opposed design to eliminate end thrustSplined impeller (not keyed) for longer life
The HM pump has been a top seller for Darley and throughout the industry for many yearsdue to its compact design, capacity, durability and simplicity in maintenance. The HM isan ideal pump for tanker applications, brush trucks and mini pumpers, and providesexcellent pump and roll performance. The compact design also allows it to fit into tight spots in retrofits of existing apparatus. The HM pump is available in three differentassembly levels, from the pump only to a fully manifolded offering to meet all needs.
ASSEMBLY #1Single stage, centrifugal pump, gearbox assembly, 21/2" NPT discharge, 3" NPT suction (HM250/350), 4" NPT suction (HM500)Dimensions:HM250/HM350: 15"L x 11"W x 18"H, 127 lbs. (58 kg)HM500: 16"L x 11"W x 18"H, 140 lbs. (64 kg)
ASSEMBLY #2Single stage, centrifugal pump, gearbox assembly, suction elbow,discharge head with check valve, 2 - 21/2" NPT discharge, 3 - 3"suction (HM250/350), 3 - 4" victaulic suction (HM500)Dimensions:HM250/HM350: 25"L x 14"W x 31"H, 150 lbs. (68 kg)HM500: 27"L x 16"W x 34"H, 200 lbs. (91 kg)
ASSEMBLY #3Single stage, centrifugal pump, gearbox assembly, suction elbow,discharge head with check valve, complete manifolds, dischargevalves, adapters and caps, 2 - 21/2" NH 1/4 turn ball valves, 2 - 3" NH suction adapters and caps (HM250/350), 2 - 4" NH suction adapters and caps (HM500)Dimensions:HM250/HM350: 25"L x Body Width x 31"H, 325 lbs. (148 kg)HM500: 27"L x Body Width x 34"H, 425 lbs. (193 kg)
HM 250 Performance250 gpm @ 150 psi175 gpm @ 200 psi125 gpm @ 250 psi
HM 350 Performance350 gpm @ 150 psi245 gpm @ 200 psi175 gpm @ 250 psi
HM 500 Performance500 gpm @ 150 psi350 gpm @ 200 psi250 gpm @ 250 psi
Oversized, deep groove radial type bearings for longer life10 tooth splined shaft for durabilityHelical cut gears
1-1/2 & 2-1/2 AG PTO PumpsPump Casing
Vertically split type, aluminum alloy, bronze fitted is standard; all-bronze opt.
Pump ShaftPrecision-ground stainless steel with long-wearing ceramic hard-coating under packing glands. Shaft is splined for broached impeller hubs for greater resistance to wear, torsional vibration and torque imposed by engine.
ImpellerHigh-strength bronze alloy accurately balanced and splined to pump shaft for precision fit and durability. Seal ring design eliminates end thrust.
www.edarley.com/pumps | 1.800.323.0244
PUMPS
Call for completespecifications,
2-1/2 AG Performance325 gpm @ 150 psi260 gpm @ 200 psi140 gpm @ 300 psi
1-1/2 AG Performance150 gpm @ 80 psi
100 gpm @ 200 psi35 gpm @ 300 psi
BearingsDeep-groove radial-type ball bearings, oversized for long life. Bearings are protected at openings from road dirt and water splash with oil seals.
Shaft SealEasy maintenance of the exclusive Darley Injection Packing System which allows pump to be repacked in minutes. Opt. mechanical seal is available.
Inlet/Outlet1-1/2AG: 2" NPT suction, 2" NPT discharge2-1/2AG: 21/2" NPT suction,21/2" NPT discharge
JMP 500Features
Two stage, series/parallel, centrifugal pump, PTO driven3 - 21/2" NPT discharge flanges3 - 4" NPT suction flangesRotation: engine or opposite engineGear ratio to fit PTOMounting angles
Dimensions241/2"Lx12"Wx26"H, 250 lbs. (114 kg)
JMP 500 NH(Normal Pressure, High Pressure) Simultaneous for normal pressure, high pressure200 gpm @ 110 psi100 gpm @ 290 psi
OptionsAir powered staging valve with 13/4" air cylinder3-gear gearcase
JMP 500 Performance500 gpm @ 150 psi375 gpm @ 200 psi250 gpm @ 250 psi100 gpm @ 500 psi
JMP 500 3-Gear
JMP 5002-Gear
PSP 1000, 1250, 1500
Assembly #1Single stage, centrifugal pump, PTO driven, 2 gear case
18"Lx17"Wx26"H, 325 lbs. (148 kg)Assembly #2 Single stage, centrifugal pump, PTO driven, suction elbow, discharge head with check valve
Dimensions29"Lx17"Wx39"H, 435 lbs. (197 kg) Features
3" or 4" NPT discharge flanges5" or 6" suction flangesRotation: engine oropposite engine1410 lock on yokeMounting angles
Assembly #3Single stage, centrifugal pump, PTO driven, suction elbowand suction manifold with nipple, discharge head withcheck valve, discharge manifold and discharge valvesDimensions
29"Lx84"Wx39"H, 670 lbs. (304 kg)
LSP 500, 750, 1000
Assembly #3
FeaturesSingle stage, centrifugal pump, PTO driven5" NPT discharge flanges6" NPT or weld suction flangesRotation: engine or opposite engine
PSP 1000 Performance1000 gpm @ 150 psi700 gpm @ 200 psi500 gpm @ 250 psi
PTO Pumps
306 1.800.323.0244 | www.edarley.com/pumps
PUM
PSMADE IN
USA
Choice of the U.S. ForestService & CaliforniaDept. of Forestry
LSP 500 Performance500 gpm @ 150 psi350 gpm @ 200 psi250 gpm @ 250 psi
PSP 1250 Performance1250 gpm @ 150 psi875 gpm @ 200 psi625 gpm @ 250 psi
Options
LSP 750 Performance750 gpm @ 150 psi525 gpm @ 200 psi375 gpm @ 250 psi
Assembly #1
Dimensions19"Lx18"Wx23"H, 345 lbs. (157 kg)
Discharge manifold, available as 2 gear (pictured) or 3 gear transmission
PSP 1500 Performance1500 gpm @ 150 psi1050 gpm @ 200 psi750 gpm @ 250 psi
LSP 1000 Performance1000 gpm @ 150 psi700 gpm @ 200 psi500 gpm @ 250 psi
PSRH 1000 - 1500
PSD 1000, 1250, 1500 Silent Pak®Single Stage, Centrifugal, Single Suction Impeller, Direct(Gearless) Drive to Impeller, PTO Driven
Features5" NPT discharge flanges6" NPT or weld suction flange1410 companion drive flange Rotation: engine or opposite engine
PSD 1250 Performance1250 gpm @ 150 psi875 gpm @ 200 psi625 gpm @ 250 psi
PSD 1500
Single Stage, Centrifugal, PTO Driven 3 Gear Gearcase
Assembly #14" or 5" NPT or weld discharge flange2nd stage pump5" or 6" NPT or weld flange suctionRotation: Engine or Opposite Engine1410 lock on yoke
PSD 1500 Performance1500 gpm @ 150 psi1050 gpm @ 200 psi750 gpm @ 250 psi
1500 GPM rating using the Chelsea 870/877PTO on the EVS transmission
1500 gpm rating from Chelsea when using their Model 870XAFJP-B5XV series PTO with a 200% ratio and an Allison EVS 3000 Seriestransmission. The engine speed needed is only 2049 rpm, so it canbe matched with most engines on the market capable of producingat least 225 net horsepower. The Allison transmission must beordered with the 1:00 PTO provision, but the pump can run off the8:00 or 1:00 position.
PSRH 1250 Performance1250 gpm @ 150 psi875 gpm @ 200 psi625 gpm @ 250 psi
PSRH 1500 Performance1500 gpm @ 150 psi1050 gpm @ 200 psi750 gpm @ 250 psi
2nd Stage H 100 BoosterSingle Stage, Centrifugal, High Pressure Booster. Can BeAdded To Any Midship Or PTO Pump For SimultaneousHigh Flow, High Pressure - Pressure up to 600 psi.
High Pressure 2nd StageSimultaneous Flows
200 gpm @ 400 psi100 gpm @ 580 psi
H 100 Booster
PTO & Front/Rear Mounted Pumps
Assembly #3 Discharge manifold with 4-21/2" NH, 1/4 turn, ball, discharge valves and caps, mounted3" NPT discharge tap5" or 6" NPT or weld flange suction
307www.edarley.com/pumps | 1.800.323.0244
PUMPSMADE IN
USA
PSRH 1000 Performance1000 gpm @ 150 psi700 gpm @ 200 psi500 gpm @ 250 psi
Dimensions & Weight16"L x 19"W x 19"H225 lbs. (102 kg)
ApplicationsCrash Fire RescueRescue PumperTanker
TransmissionRecommended Transmission:LDM-XHD-PTOGear Ratio: 1.34:1 - 2.67:1300 HP Split Shaft PTO, Torque Rating Up to 19,300 ft. lb.
BenefitsQuiet – No transmission to generate pump noiseCompact – Weighs only 225 lbs.Economical – Priced at a fraction of the cost of conventional splitshaft midship pumps Maintenance Free – No maintenance required for the pump when ordered with a Darley mechanical seal
PSD 1000 Performance1000 gpm @ 150 psi700 gpm @ 200 psi500 gpm @ 250 psi
LDM-XHD-PTOPower output over 300 HP
Torque output over 600 ft-lbs.
Shown with OptionalHydraulic Motor
Now available up to 1000 GPM
European design,low profile500-1000 gpm, Single Stage, Centrifugal, Rear Mount
Pump with Independent Second Stage
The pumps have been adapted to the following standard hydraulic motor mounts:
11/2 AGH - SAE “B” flange, 13T 16/32 involute spline shaft
HH100 - SAE “B” flange, 14T 12/24 involute spline shaft
HH250/350/500 - SAE “C” flange, 14T 12/24 involute spline shaft
JMH500 - SAE “C” flange, 14T 12/24 involute spline shaft
LSH1000 - SAE “C” flange, 14T 12/24 involute spline shaft
Hydraulically Driven Pumps
Transmission Casing: Alloy cast-iron with adequate oil reservecapacity helps ensure low operating temperature.Drive Shafts: Precision-ground heat-treated alloy steel STD on XHD.Gears: 25/8"XHD face helical. Precision-cut from heat-treated alloysteel for quite operation and long life.Gear Shift: A heat treated alloy steel splined spur gear engageseither pump drive gear or truck drive shaft gear. A two positionpositive-lock manual selection lever in cab is standard. Air powered shift control is optional.Bearings: Deep groove radial type ball bearings, oversized forlong life. Bearings are protected at openings from road dirt andwater splash with oil seals and water slinger.Pump Gear Ratios: For optimum matching of engine to pump,the following step up ratios are available: 1.34, 1.49, 1.66, 1.86,2.12, 2.44, 2.66 also 1 to 1. Available with engine or oppositeengine rotation.
Split-Shaft LDM-XHD-PTO
KSRH 500, 750, 1000
KSRH 500 Performance500 gpm @ 150 psi350 gpm @ 200 psi250 gpm @ 250 psi
KSRH 750 Performance1250 gpm @ 150 psi875 gpm @ 200 psi625 gpm @ 250 psi
KSRH 1000 Performance1000 gpm @ 150 psi700 gpm @ 200 psi500 gpm @ 250 psi
High Pressure200 gpm @ 400 psi100 gpm @ 500 psi
Features Discharge manifold with 21/2" NH, 1/4 turn, ball, discharge valves and caps, (2 - 500 gpm, 3 - 750 gpm, 4 - 1000 gpm) mounted3" NPT discharge flange5" NH suction and cap4" NPT suction tapComplete mounting kitIndependent 2nd stage, high pressure booster, mounted direct to main pump transmission
Dimensions33"Lx31"Wx33"H, 510 lbs. (232 kg)
LDM-XHD-PTO-O: Opposite engine rotation, Gear ratio: 0.93 to 1 thru 1.27 to 1LDM-XHD-PTO-E:Engine rotation, Gear ratio: 1:34 to 1 thru 2.67 to1
Pumps
308 1.800.323.0244 | www.edarley.com/pumps
PUMPS
MADE IN
USA
Great for PumpingIndependent of Road Speed
Butterfly ValvesBehind-the-panel butterfly valves are available in either manual or electric, meeting the latest NFPAslow close and relief valve requirement.
Impeller ShaftsImpeller shafts incorpo-rate SAE 10-tooth splinerather than keyed pressfits for exceptional dura-bility with our broachedimpeller. A splined fit isstronger than a single key, so it never shears.
Mechanical Seal OptionOptional mechanical sealis made with a silicon carbide stationary face which is extremely hard and heat dissipative, resisting wear and dry running damage.
Pressure Relief ValveAutomatically activates valve at pre-set pressures up to 800 psi. Remotepanel control unit provides on/off selectorvalve, hand wheel pressure setting controland flush valve to cleanthe strainer. Equippedwith emergency override.
Oil-Less PrimerPositive displacement rotary vane vacuum pumpwith self-lubricating vanesrequires no lubricant forthousands of primes. Noneed to mount and fill areservoir. Fluid primers are still available.Available in 12 or 24 volt.
Overheat ProtectionSystemStainless steel and brass temperature relief system has a preset temp of 120°Fwhich then dumps up to55 gpm into atmosphereafter which the systemresets automatically.Available in 12 or 24 volt.
Injection PackingTime saving and reliable, this Darley exclusive feature allows the pump to be repacked in min-utes, rather than hours,and eliminates the chanceof an on-scene mechani-cal seal failure.
Discharge Check ValveThis automatic dischargecheck valve permits Darley pumps to beprimed with dischargegates open and capsremoved when drafting toget water on the fire rapidly. Pump holds primeduring intermittent drafting operations.
Vacuum CastImpellerAccurately balanced to fit a 10-splined stainless steel pump shaft for exceptional durability and efficiency.Twisted vane design allows for higher lift.
309www.edarley.com/pumps | 1.800.323.0244
PUMPSMADE IN
USA
LDM PUMP FEATURES THAT SET US APARTSelf-Locking Discharge ValvesBronze valves with stainless steel ball valvesstay secure in the posi-tion. 1/4 turn valves won’tcreep, even under maximum pressure, andthere are no clumsytwist handles to lock.
LDMH High Pressure OptionOptional high-pressurebooster pump can be added to most Darley models for pressure up to 600 psi.
AutoControl™GovernorRegulates pump press. and monitors all ess.engine vital signs. This aut. pressure gov. constantly monitors and adjusts the throttle to safely maintain the desired pressure.
Patented AutoCool™Eliminates the possibility of oil contamination cooling oil from outside the transmission
LDM Midship PumpSingle-Stage or Multi -Stage
Magna Trans PerformanceDriveline Rating of - 19,230 ft. lbs.Extra Oil Capacity - 64 oz.Bullet Nose Sliding Clutch GearEasy Access Dipstick
HM 500 Solution Series™ Module
Hand wheel controlled tank to pumpAir actuated tank to pumpFront/rear dischargeDeck gunFoam level gauge
Features
Options
Features
Options
Back view
310 1.800.323.0244 | www.edarley.com/pumps
PUM
PSMADE IN
USA
1500 gpm RatingAvailable Without Intake Valve
Save Valuable Space and Weight
PSP 1250 Solution Series™ Module
900 lbs. - 1,100 lbs. (Approximate weight range)6 bolt attachment to frame rail, turnkey packagePTO drivenSingle side 6" suction intakeFully engineering side slung moduleDarley AutoControl™ governorDarley rotary vane primer2" Akron push-pull controlled tank fill4" Darley tank to pump swing check valve assemblyWater level gauge
Transmission mounting angle for improved driveline angles6" Butterfly valve, manual hand wheel controlled3 – Panel mounted 21/2" discharges(Optionally lever or push-pull controlled)Up to 3 - 3" Akron electrically actuated water onlydischarges (LDH passenger, LDH rear, LDHmonitor/deck gun, LDH front bumper, etc.)1 - 3" Akron electrically actuated water/foam discharge3 - 2" Akron push-pull controlled water/foam discharges for cross-lay, speed-lay, or front dischargeFoam level gaugeFoam Pro 2001/2002 system
The PSP 1250 Solution Series™ is ideal for tankers and economical pumpers.
500 - 700 lbs. (dependent on options)4 bolt frame attachment, turnkey packagePTO Driven HM 5004" suction21/2" auxiliary suction2" pump to tank, push pull controlledDarley AutoControl™ governorDarley oil-less primerWater level gaugeElectrically actuated tank to pump2 - 21/2" panel mounted discharges, Lever controlled2 - 11/2" crosslays, push-pull controlled
The HM 500 Solution Series™ features the Darley HM 500 PTO-drivenpump with a control panel that has all the bells and whistles.
311www.edarley.com/pumps | 1.800.323.0244
PUMPS
MADE IN
USA Optional Pump Accessories
The pump AutoControl™Governor not only regulates pump pressure,but monitors all essentialengine vital signs. Thisautomatic pressure gover-nor constantly monitorsand adjusts the pumpthrottle to safely maintainthe desired pressures.
AP00950 Rotary Vane Primer $1,450.00AP00960 Fluid-less Vane Primer $1,450.00
Injection Packing
2603145 Darley AutoControl™ Governor, All Engines $4,140.004216300 Darley AutoControl™ Governor, Ford 6.0 $4,140.00
VD00600 Multi-Port Isolated Valve $400.00
Control panels are available on many ofDarley’s portable pumps. Standard panelincludes a RUN/STOP ignition switch, astarter button, throttle, and liquid-filledgauges. It will also work with recoil ropestart engines. Ship. wt. 1 lb.
Control PanelDischarge Relief ValveDarley relief valves are madeof high-strength bronze alloyfor corrosion resistance andlong service life. For pressurerelief, these valves will automatically activate at a preset pressure up to 800 psi. Remote panel control providesON/OFF selector valve, large handwheelpressure setting control, flush valve andstrainer A switch attachment actuates a pilotlight to indicate when the valve is either open orclosed. A mechanical override allows the valve to beclosed manually. Ship. wt. 35 lbs.
VR00700 3" Thru 1500 GPM $1,890.00VR00500 Suction Relief Valve $1,420.00
AC01104 Control Panel $555.00
Multi-Port Isolated ValveThis 6-port drain is designed with independent ports which virtually eliminate inaccurate gauge readings.Ship wt. 4 lbs.
Smart Panel
Pump intake and discharge pressures in both psi and KpaPump cavitation alarm and adjustment back to idleEngine monitoring of oil pressure, water temperature, battery voltage, and engine rpmPreset function for instant and reliable operationSave money, a pressure relief valve or individual gauge controls are no longer required
Darley AutoControl™ Governor Rotary Vane PrimerPositive displacement rotary-vane vacuum pump for 20' to 28' suctionlifts with any make, capacity, or style fire pump. Constructed of aluminumalloy, heat-treated and hard-coat anodized to take the punishment offire service. Solenoid-operated motor runs from vehicle’s electrical system. Priming system includes bronze push/pull valve with electricswitch, and complete mounting and operating instructions. Rotary-vanepriming pump with valve, solenoid and motor. 12 volt or 24 volt. Ship. wt. 42 lbs.
Packing adjustments are madesimple with Darley Injection
Packing. One tube containseight pellets. Ship wt. 1 lb.
3817104 Injection Packing $52.00
VD00102 Master Drain $236.00
Master DrainHeavy brass tubing and plunger,stainless steel rod. Eight holestapped for iron pipe fittings tohold copper tubing from up toeight locations.
4227800 Smart Panel $6,965.00
Darley Fuel TanksDarley’s fuel tanks are another great accessoryfor your portable pump. The plastic fueltanks are EPA compliant. Ship. wt. 4 lbs.
Control engine speedActs as pressure regulatorWaterproofDisplays discharge pressuresForces back to your presetRotary knob for setting pressure/rpm7" high contrast color LCD screenActs as CAFS Commander (opt) Used on LE600 pumps for USMC
KE00128 6 Gallon Fuel Tank $270.00KE00129 3 Gallon Fuel Tank $265.00
Foam proportioners:Foam Flurry foam system
Work light
Water/foam nozzle packages
for N.A.F.S.
Built-in foam cell
Hondaengine
1.5" Mattydaleswivel
Poly hose tray
250/300 gallon tank
Features13 HP twin impeller Darley Davey pump with Briggs & Stratton engine200 gallon Pro Poly tankF4000 Hannay electric rewind reel100' of 1" booster hoseSelf-priming up to 19'1.5" or 2.5" NST suction adapter1" tank recirculation1.5" tank to pump and discharge
BenefitsErgonomically designedForkliftable to standard pick-up bedSolid pump performance forgrass firefighting
Dimensions & Weight94"L x 48"W x 42"H700 lbs. (318 kg)
Attack 1 with Options
Roller & spoolhose guide
312 1.800.323.0244 | www.edarley.com/pumps
PUM
PSMADE IN
USA
Theoretical Friction Loss in100' of 1" Booster @ 100 psi
12 gpm = 2 psi20 gpm = 6 psi30 gpm = 14 psi
Attack 1 Performance120 gpm @ 40 psi95 gpm @ 108 psi20 gpm @ 146 psi
Attack 1Fast Attack Skids Attack 1 $8,600.00
with Options
Email your inquiries to
313
MADE IN
USA
The Attack 2 has the same tank and reel as the Attack 1 but standardizes on our gear-driven or direct-drive Darley pump coupled to an 18 hp engine with control panel.
1.5AGE18V120 gpm @ 130 psi100 gpm @ 170 psi25 gpm @ 270 psi
Attack 2 Performance2BE18V
375 gpm @ 25 psi300 gpm @ 45 psi
100 gpm @ 140 psi
FeaturesDarley 18 hp pumpExhaust primer200 gallon Pro Poly tankHannay electric rewind reel100' of 1" Booster hose
Dimensions & Weight94"L x 48"W x 42"H900 lbs. (409 kg)
OptionsBriggs Vanguard, Honda and diesel enginesN.A.F.S. Nozzle Aspirated Foam SystemsJakPak drop-ins bodiesSee the Attack 1 with options
Fast Attack Skids Attack 2 $11,200.00
Also available in diesel-powered
The UHP-HV® (Ultra High Pressure-High Volume) module offers the best of both worlds for the wildland-urban interface. Darley has combined ourversatile direct-drive 2BE pump and the CAT 7CP highpressure piston pump to meet all your firefightingneeds in one compact package. Main pump can beused for water transfer or for 11/2" hose for structuralattacks while the belt driven CAT can produce low flowhigh pressure flows in excess of 1300 psi with optionalfoam through the 1/2" HP hose. The system is nowavailable in both gasoline and diesel-powered versions. The diesel boasts a 24.5 HP Kubota water-cooled engine.
UHP-HV®Ultra High Pressure - High Volume
UHP3 gpm @ 600 psi
3.5 gpm @ 780 psi4 gpm @ 1050 psi
Simultaneous Flows2BE23V
250 gpm @ 45 psi160 gpm @ 80 psi30 gpm @ 125 psi
UHP8 gpm @ 1200 psi
Individual Flows2BE23V
275 gpm @ 55 psi175 gpm @ 100 psi45 gpm @ 140 psi
The UHP-HV® utilizes our patented ODIN® drive system driving our 2BE high volume pump and a high pressure CAT piston pump.
FeaturesCAT 7CP high pressure piston pump with foam injectionHigh pressure pump belt drive systemHigh volume Darley 2BE pumpBronze impeller and seal ringsKeyed impeller and shaftOversized bearing for longer lifeExhaust primerPowder coated aluminum frameAll stainless plumbingElectric rewind Hannay Reel with 200' of 1/2" hose, full capture leadsDual Strike Gun with holster (20' effective discharge)Reel Height: 421/2"
Dimensions & Weight46"W x 24 1/2"H x 32"D569 lbs. (258 kg)
PUMPS
www.edarley.com/pumps | 1.800.323.0244
Restart Time Delay Control Panel
Standard Control Panel
Standard Plus Control Panel
Self Testing System Control Panel
Darley Self-Testing Hydrant BoosterCustom Pump Solutions
Features
314 1.800.323.0244 | www.edarley.com/pumps
PUM
PS
NFPA 13D Fire Pump Control PanelsRestart Time Delay
Works with external pressure switchIncludes pressure switch relay andrestart time delay
StandardMotor HP rated disconnectIntegrated pressure switchIntegrated minimum run timer andrestart time delayRemote Start and 3rd party monitoring contacts
Standard PlusWeekly exercise timer – “Pumperciser”All the same features as the Standard
Self-Testing SystemMarkets only automatic pump testMarkets only dual pressure transducer based systemGreen Check on panel face means last test successfulPLC based programJockey Pump Mode, can help detect a leakRecover mode, provides automatic shutdown when there is no more demandOptional web browser and email capabilityRemote Start ContactsThird party monitoring contract
In order for a fire department to operate effectively and efficiently it must have atrained staff, working equipment and a water supply. The Darley Self TestingHydrant Booster is an essential work horse piece of equipment that helps ensurereliable equipment and access to a pressurized water supply. For rural areas orany area with inadequate water pressure, the Darley Self Testing Hydrant Boosteris your solution for consistent, reliable hydrant pressure. Your department can beconfident that you will have the water you need, when you need it.
Patented Self Testing technologyMounted on a fully integrated skid unitThe Self-Test is a real test based solely on the pump’s reaction and performance when a true drop in pressure is created on the discharge linePanel contains full web browser capability and its own IP addressStatus of pump running, test mode activation, test successful and system fault light can be monitored from the web or emailPanel is a single point connection design that holds controls for both the primary pump and jockey pump, reducing installation costJockey Pump is controlled by a variable speed VFD controller that helps further reduce set up time, reduce pump hammering, and prolong the life of the pumpsPanel also includes a manual start button
Panel includes a mechanical bypass so in the unlikely event the PLC were to fail, the system would default to a mechanical pressure switch control, allowing for the primary pump to start in the event of a pressure drop. The mechanical bypass includes minimum run timer, so in the event pressure recovers, the pump can still shut itself down after 3 minutes of running under recovered pressure conditions.
MADE IN
USA