date: customer: project: type: qty...project: type: qty: date: customer: series u5 ouray 500 order...
TRANSCRIPT
Page 1 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Ouray 500
Project:
Type: Qty:
Date: Customer:
Series U5 Ouray 500
U5
Light Engine 5G350 44W/4931lm
5G530 68W/7233lm
5G700 89W/9083lm
CCT
Optics R1 Type I
R2 Type II
R3 Type III
R5R Type V (Round)
Adjustable Mounting
S1 Single Short Arm
S2 Double Short Arm
L1 Single Long Arm
L2 Double Long Arm
Finish WH White
BK Black
BZ Bronze
SP Specify Premium Color
Voltage UNV
Options
32700K and 3000K are IDA-Approved
*For other CCT, please consult factory.
SV Silver
303 3000K
40 4000K
8 120V, 240V or 277V only
7 120V or 277V only
6 DM, HLXX, TLR or IMS only. Cannot be combined.
5 Type I, II, III, and IV only
9 Glass is included with CO and PP options and does not need to be specified separately
R4 Type IV
R5S Type V (Square)
5G105 136W/12,517lm
5G1402 183W/15,307lm
BL Semi- Matte Black
120-277V
HS5 House Side Shield (180°)
DM6 Dimming (0-10V)
GL9 Tempered Glass Lens
TLR6,8 Twist Lock Receptacle 7-Pin with Shorting Cap
HL306,8 Hi-Lo Switching Low Output 30%
HL506,8 Hi-Lo Switching Low Output 50%
PP Plane Projector
Fixed Mounting
S 60mm Slip Fitter
W Wall Mount
AT1 Adjustable Tilt
AS Adjustable Swivel
SA Single Pole Adaptor
WD Decorative Wall Box
1204 120V
2404 240V
2774 277V
347 347V
480 480V
4Specify for HLXX option
Pole Motion Sensor with optional photocell See page 11 for order code
2 347/480V and HLXX options cannot be combined with 5G140
* Based on RI distributions at 3000K CCT no glass.
Power Cord Length
CO9 Comfort Optics (Not available with PP optics)
* Add length of arm and height of pole to determine power cord length
TLRP8 Twist Lock Receptacle3-Pin with Photocell
IMS6,7
Internal Motion Sensor
R3W Type III (Wide)
R5Q Type V (Rectangular)
273 2700K
* May be combined with adjust-able mounting
LED WARRANTY
5YEARBUY
AMERICAN
8 10 12 14 16 18 XX8’ 10’ 12’ 14’ 16’ 18’ XX’
- - - - - - -
Pole Order Code:Series Height Finish Options
-
- - -
-Order Code: U5
Page 2 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Specifications
U5
18 15/16” (481mm)
11 7/16” (290mm)
3 9/16” (91mm)
Ouray 500
1. Fixture Housing - Die cast low copper marine grade aluminum body and door. Optional tempered glass lens.
2. Gasketing - Continuous molded silicone gasket provides weatherproofing, dust and insect control at all luminaire connections.
3. Access Door - Die cast low-copper marine grade aluminum door. Hinges open for tooless access to LED light engine and is retained in place with fixed hinge.
4. LED Array - High Flux LEDs mounted to metal core PCB and attached to external heat sink for maximum LED performance and life. CCT tolerance within a 3-step bin and provided with a minimum CRI of 80. LED array has a reported lumen maintenance of 93% at 50,000 hours. L70 calculated greater than 100,000 hours. Exposed face rated to IP65.
5. LED Optics - Technical Optics (R1, R2, R3, R3W,R4, R5S, R5Q and R5R) use Selux signature light pattern acrylic lens holder to secure proprietary silicone optics. Internal micro house side shield available for distributions types I, II, III & IV. Plane Projector (PP) optics available for uplighting. Comfort Optics (CO) option provided with fully diffuse glass.
6. LED Driver - LEDs are driven by RoHS compliant constant current programmable LED driver. Driver includes 0-10V dimming to 10%, meets the requirements of IP66. Driver assembly located inside the head and accessible through the hinged door. 7. Surge Protection - 3-Pole Surge Protection device safeguards electrical components from indirect lighting strikes and surges up to (20kA standard). RoHS compliant.
Exterior Luminaire Finish -Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI.
Standard exterior colors are White (WH), Black (BK), Semi-Matte Black (BL), Bronze (BZ), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide. Hot Dip Galvanized finish (GV) on all steel parts also available.
5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that Ouray LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the fixture, LED driver and LED light engine when installed and operated according to Selux instructions. Fixture suitable for ambient temperatures of 45ºC (113ºF). For details and exclusions, see “Selux Terms and Condition of Sale.”
Listings and Ratings: Tested to IESNA LM-79-08 and LM-80 test standards at 25ºC ambient temperature. Rated for wet location.
Visit selux.us for our LED End of Life recycling policy.
NRTL Listed (i.e. UL, CSA)
For Buy American compliance on poles, please consult the factory.
1
45
2
Page 3 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Mounting
Ouray 500
S2 - Double Short Arm
EPA = 1.3ft2 (0.13m2)
Weight = 40lbs. (18kg)EPA = 0.8ft2 (0.08m2)
Weight = 21lbs. (10kg)
S1 - Single Short Arm SA - Single Pole Adaptor
EPA = 0.5ft2 (0.05m2)
Weight = 19lbs. (9kg)
27 1/8” (688mm)
54 3/16” (1377mm)
22 916 "
572mm22 916 "
572mm22 9/16”
(572mm)
Page 4 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Mounting
Ouray 500
47 5/8” (1210mm)
EPA = 1.1ft2 (0.10m2)
Weight = 21lbs. (10kg)
L1 - Single Long Arm
EPA = 1.8ft2 (0.157m2)
Weight = 40lbs. (18kg)
L2 - Double Long Arm
95 5/16” (2421mm)
Page 5 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Mounting Details
Ouray 500
S 60 mm Slip Fitter
FITS Ă 2 38 "
60mm
TUBE
5 3/16” (131mm)
3 3/16” (81mm)
3 3/16” (81mm)
Fits Ø 2 3/8” (60mm)
38 "
10mm6 5
16 "160mm
516 "
8mm
518 "
130mm
6 516 "
160mm
512 "
140mm
8130mm
51 "
4 516 "
110mm
Ă 14 "
7mm(FOR M6 BOLTS
BY OTHERS)
1 916 "
40mm
Ă
W Wall Mount
3/8” (10mm)
6 5/16” (160mm)
5 1/8” (130mm)
5/16” (8mm)
4"102mm
4"102mm
4x Ă 38 " 9mm
(FOR M8 BOLTSBY OTHERS)
Ă 8"203mm
4x PLUGS AND 1/2" WATERTIGHTCOMPRESSION CONNECTORINSTALLED IN THE FIELD BY OTHERS(EVERY 90 Ā)
WD Decorative Wall Box
2 5/8” (66mm)
5 1/8” (131mm)
Ø8”(203mm)
4x Plugs & 1/2” Watertight Compression Connector
Installed by others(Every 90°)
2 58 "
66mm
Ă 8"203mm
518 "
131mm
4x PLUGS AND 1/2" WATERTIGHTCOMPRESSION CONNECTORINSTALLED IN THE FIELD BY OTHERS(EVERY 90 Ā)
4"102mm
4"102mm
4x Ă 38 " 9mm
(FOR M8 BOLTSBY OTHERS)
4” (102mm)
4” (102mm)
4x Ø 3/8” (9mm)For M8 bolts by others
1/2" conduit by others
Ø8”(203mm)
38 "
10mm6 5
16 "160mm
516 "
8mm
518 "
130mm
6 516 "
160mm
512 "
140mm
8130mm
51 "
4 516 "
110mm
Ă 14 "
7mm(FOR M6 BOLTS
BY OTHERS)
1 916 "
40mm
Ă
6 5/16” (160mm)
5 1/2” (140mm)
5 1/8” (130mm)
4 5/16” (110mm)
1.378” (40mm)
Ø1/4” (7mm)
For M6 bolts by others
1.772” (45mm)
Page 6 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
21516 "
75mm
21516 "
75mm
6 18 "
155mm6 18 "
155mm
21516 "
75mm
2 1516"
75mm
Tilt +/- 90° in 2.5° increments
Adjustable arm located between fixture head and fixed mounting.
Swivel +/- 90° in 2.5° increments
Mounting Details
Ouray 500
6 1/8” (155mm)
6 1/8” (155mm)
2 15/16” (75mm)
2 15/16” (75mm)
2 15/16” (75mm)
2 15/16” (75mm)
AT Adjustable Tilt
AS Adjustable Swivel
EPA = 0.1ft2 (0.01m2)
Weight = 2.5lbs. (1.1kg)AT/AS mounting only - Add to primary mounting values.
EPA = 0.1ft2 (0.01m2)
Weight = 2.5lbs. (1.1kg)AT/AS mounting only - Add to primary mounting values.
Page 7 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Ouray 500
Optional Base Covers for PolesDie cast aluminum.
Pole InformationRefer to pole specification sheets for construction details, anchorage information and additional options.
A35Round Straight Aluminum Pole
AT535 / AT64/AT74 Tapered Aluminum Pole
A40Round Straight Aluminum Pole
BC9 Optional Base Cover (AT64) Die cast aluminum, two-piece field installable base cover.
81/8” (205mm)
Ø203/8” (518mm)
Ø6” (152mm)
BC13 Optional Base Cover (A40) Die cast aluminum, two-piece field installable base cover.
Ø12 1/2” (316mm)
5 3/16” (131mm)
Ø4” (102mm)
18” (457mm)
26” (660mm)
Pole
Hei
gh
t
18” (457mm)
BC3 Optional Base Cover (AT535) Die cast aluminum, two-piece field installable base cover.
Ø5” (127mm)
5 3/16” (131mm)
Ø12 7/16” (316mm)
Pole width3.5"(90mm)
Pole width4"(102mm)
Pole Data Chart
Allowable EPA calculated according to AASHTO 1994 and include allowance for 1/3 gust factor. See Mounting Configuration pages for fixture arm weight and EPA values.
Pole SeriesBolt
CircleHeight Finish Options90
mph100
mph110
mph120
mph130
mph140
mph150
mph160
mph170
mph180
mph
U-35 31/2" Round Straight Aluminum Pole 73/4" 4.8 3.5 2.6 1.8 1.3 0.9 0.7 0.6 - - 12 12ft WH White
BK Black
BL Semi-Matte Black
BZ Bronze
SV Silver
SP Specify Premium Color
BC3 Decorative Cast Aluminium Base Cover (AT535)
BC9 Decorative Cast Aluminium Base Cover (AT64)
BC10 Decorative Cast Aluminium Base Cover (AT74)
BC13 Decorative Cast Aluminium Base Cover (A40)
T35 Supplied with 31/2" diameter tenon, 41/2" high (use for A40, AT64, AT74 only)
REC GFCI Receptacle with weather-proof cover
REC2 GFCI Receptacle with padlockable in-use cover
REC3 USB and Duplex Receptacle with weather proof cover
REC4 USB and Duplex Receptacle with weatherproof padlockable in-use cover
MS Motion Sensor w/ Optional Photocelll
U-A40 4" Round Straight Aluminum Pole 71/2" 9.3 7.2 5.6 4.5 3.7 3.1 2.7 2.3 2.0 1.7
U-AT535 5" to 31/2" Round Tapered Aluminum Pole 85/8" 13.4 10.5 8.4 6.9 5.8 4.9 4.2 3.6 3.2 2.8
U-AT64 6" to 4" Round Tapered Aluminum Pole 91/2" 20.3 16.1 13.1 10.9 9.2 7.9 6.8 5.9 5.2 4.5
U-A35 31/2" Round Straight Aluminum Pole 73/4" 3.5 2.4 1.6 1.0 0.5 - - - - - 14 14ft
U-A40 4" Round Straight Aluminum Pole 71/2" 10.3 7.9 6.1 4.9 4.0 3.4 2.9 2.5 2.1 1.8
U-AT535 5" to 31/2" Round Tapered Aluminum Pole 85/8" 11.2 8.7 6.9 5.5 4.6 3.8 3.3 2.8 2.4 2.1
U-AT64 6" to 4" Round Tapered Aluminum Pole 91/2" 17.2 13.6 11.0 9.1 7.6 6.5 5.6 4.8 4.2 3.7
U-A35 31/2" Round Straight Aluminum Pole 73/4" 2.1 1.2 0.6 - - - - - - - 16 16ft
U-A40 4" Round Straight Aluminum Pole 71/2" 8.3 6.2 4.7 3.6 3.0 2.5 2.1 1.7 1.5 1.2
U-AT535 5" to 31/2" Round Tapered Aluminum Pole 85/8" 9.1 6.9 5.4 4.3 3.4 2.9 2.4 2.0 1.7 1.5
U-AT64 6" to 4" Round Tapered Aluminum Pole 91/2" 14.3 11.2 9.0 7.4 6.2 5.2 4.4 3.8 3.3 2.9
U-A40 4" Round Straight Aluminum Pole 71/2" 6.6 4.8 3.5 2.6 2.1 1.7 1.4 1.1 0.9 0.7 18 18ft
U-AT535 5" to 31/2" Round Tapered Aluminum Pole 85/8" 9.2 7.0 5.4 4.2 3.4 2.8 2.3 2.0 1.7 1.4
U-AT64 6" to 4" Round Tapered Aluminum Pole 91/2" 11.9 9.2 7.3 6.0 4.9 4.2 3.5 3.0 2.6 2.2
U-AT74 7" to 4" Round Tapered Aluminum Pole 109/16" 17.5 13.8 11.2 9.2 7.7 6.5 5.6 4.8 4.1 3.5
BC10 Optional Base Cover (AT74) Die cast aluminum, two-piece field installable base cover. 8 1/8”
(205mm)
Ø7” (178mm)
Ø203/8” (518mm)
BC5 Decorative Cast Aluminum Base Cover (A35 Pole Only) Die cast aluminum, two-piece field installable base cover.
Ø3.5” (90mm)
5 1/4” (133mm)
Ø12 7/16” (316mm)
Page 8 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Ouray 500
5 5/16" [135mm]
8 15/16" [227mm] SQUARE
Ă3 3/4" [Ă95mm]
Ă7 1/2" [Ă191mm]BOLT CIRCLE
CONDUIT OPENING
HANDHOLE SIDE OF POLE.
BOLT CIRCLE DETAIL (Not to Scale)USE CAUTION WHEN SETTING ANCHOR BOLTS. BOLTS MUST BE VERTICALLY STRAIGHT AND CENTERED ON DIMENSIONS SHOWN.
Bolt Circle for A35 & S35 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
Note: Adequate drainage must be provided in concrete foundation.
Anchor Bolt Detail for A35 & S35
3 1/4” (83mm)
3/4” x 17” Partially Galvanized Anchor Bolts
33/4” -10 Galvanized Heavy Hex Nut
3/4” (19mm) ID Galvanized Flat Washers
Concrete footing designed and supplied by others
1/2” (13mm) for leveling
3/4” - 10 Galvanized Heavy Hex Leveling Nut
Bolt Circle for A40 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
A40 POLE ONLY
Hand Hole Location
8 15/16”(227mm)
Ø7 1/2” (191mm) Bolt Circle
Ø3 3/4” (95mm) Conduit Opening
Note: Adequate drainage must be provided in concrete foundation.
5 5/16”(135mm)
3 1/4
" [8
2mm
]
1/2" [13mm]FOR LEVELING
3/4-10 UNC X 17" PARTIALLYGALVANIZED ANCHOR BOLT
3/4-10 UNC GALVANIZED HEAVY HEX NUT
3/4 I.D. GALVANIZEDFLAT WASHER
3/4-10 UNC GALVANIZEDHEAVY HEX LEVELING NUT
CONCRETE
3/4” -10 UNC x 17" Partially Galvanized Anchor Bolt
3/4” ID Galvanized Flat Washers
Concrete footing designed and supplied by others
3/4” -10 Galvanized Heavy Hex Nut
3/4” -10 UNC Galvanized Hex Leveling Nut
3 1/4” (83mm)
1/2” (13mm) for leveling
Anchor Bolt Detail for A40
Pole InformationRefer to pole specification sheets for construction details, anchorage information and additional options.
Ă4 1/2" [Ă114mm]
9 5/8" [244mm] SQUARE
Ă8 5/8" [Ă219mm]
6 1/8" [155mm]
CONDUIT OPENING
BOLT CIRCLE
HANDHOLE SIDE OF POLE.
Bolt Circle for AT535 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
Anchor Bolt Detail for AT535
Hand Hole Location
9 5/8” (244mm)
Ø8 5/8” (219mm) Bolt Circle
Ø4 1/2” (114mm) Conduit Opening
6 1/8” (155mm)
3 1/4
" [8
2mm
]
1/2" [13mm]FOR LEVELING
3/4-10 UNC X 17" PARTIALLYGALVANIZED ANCHOR BOLT
3/4-10 UNC GALVANIZED HEAVY HEX NUT
3/4 I.D. GALVANIZEDFLAT WASHER
3/4-10 UNC GALVANIZEDHEAVY HEX LEVELING NUT
CONCRETE
3 1/4” (82mm)
3/4 -10 Galvanized Heavy Hex Nut
3/4” ID Galvanized Flat Washers
Concrete footing designed and supplied by others
1/2” (13mm) for leveling
3/4” - 10 Galvanized Heavy Hex Leveling Nut
3/4 -10 x 17" Partially Galvanized Heavy Hex Nut
A35/S35 POLE ONLY
Hand Hold Location
Ø7 3/4” (197mm) Bolt Circle
Ø3” (76mm) Conduit Opening
8” (203mm)
5 5/16”(135mm)
Page 9 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Ouray 500
Pole InformationRefer to pole specification sheets for construction details, anchorage information and additional options.
6 3/4" [172mm]
10 5/16" [262mm] SQUARE
Ă5 1/2" [Ă140mm]
Ă9 1/2" [Ă241mm]
CONDUIT OPENING
BOLT CIRCLE
HANDHOLE SIDE OF POLE.
Bolt Circle for AT64 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
Anchor Bolt Detail for AT64
Hand Hole Location
10 5/16” (262mm) Square
Ø9 1/2” (241mm) Bolt Circle
Ø5 1/2” (140mm) Conduit Opening
6 3/4” (172mm)
3 1/2
" [8
9mm
]
1/2" [13mm]FOR LEVELING
3/4-10 UNC X 17" PARTIALLYGALVANIZED ANCHOR BOLT
3/4-10 UNC GALVANIZED HEAVY HEX NUT
3/4 I.D. GALVANIZEDFLAT WASHER
CONCRETE
3/4-10 UNC GALVANIZEDHEAVY HEX LEVELING NUT
3 1/2” (89mm)
3/4” -10 Galvanized Heavy Hex Nut
3/4” ID Galvanized Flat Washers
Concrete footing designed and supplied by others
1/2” (13mm) for leveling
33/4” - 10 Galvanized Heavy Hex Leveling Nut
3/4” -10 x 17" Partially Galvanized Heavy Hex Nut
11 1/4" [286mm] SQUARE
7 1/2" [190mm]
Ă10 9/16" [Ă268mm]
Ă6" [Ă152mm]CONDUIT OPENING
HANDHOLE SIDE OF POLE.
BOLT CIRCLE
Bolt Circle for AT74 Use caution when setting anchor bolts. Bolts must be vertically straight and centered on dimensions shown
Anchor Bolt Detail for AT74
Hand Hole Location
11 1/4” (286mm) Square
Ø10 9/16” (268mm) Bolt Circle
Ø6” (152mm) Conduit Opening
7 1/2” (190mm)
1"-8 UNC X 36" PARTIALLYGALVANIZED ANCHOR BOLT
1" I.D. GALVANIZEDFLAT WASHER
CONCRETE
4 1/8
" [1
05m
m]
1/2" [13mm]FOR LEVELING
1"-8 UNC GALVANIZED HEAVY HEX NUT
1"-8 UNC GALVANIZEDHEAVY HEX LEVELING NUT
4 1/8” (105mm)
1"-8 UNCGalvanized Heavy Hex Nut1” ID Galvanized Flat Washers
Concrete footing designed and supplied by others
1/2” (13mm) for leveling
1"-8 Galvanized Heavy Hex Leveling Nut
1"-8 UNC x 36"Partially Galvanized Heavy Hex Nut
Page 10 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Wiring Diagrams
Ouray 500
Standard Wiring (120V-480V)*
DRIVER(S) /LIGHT ENGINE
SURGEPROTECTOR
BLACK
WHITE
BARE
RED
ORANGE
L1
N
DIM(+)
DIM(-)
FROMFEEDCORD
TLRP1 Wiring (120V/240V/277V)
FROMFEEDCORD
L1
N
DIM(+)
DIM(-)
BLACK
WHITE
BARE
RED
ORANGE
SURGEPROTECTOR
DRIVER(S)/LIGHT ENGINE
TLRP1
RED
WHITE
GREEN
BLACK
WHITE
GREEN
BLACK
WHITE
GREEN
DIM (-)
DIM (+)
BROWN
ORANGE
CAPPEDINSIDE
FIXTURE
CAPPEDINSIDE
FIXTURE
FROMFEEDCORD
L1
N
SPARE
SPARE
BLACK
WHITE
BARE
RED
ORANGE
SURGEPROTECTOR
DRIVER(S) /LIGHT ENGINE
TLR/TLRP2/TLRP3
RED
DIM (+)
DIM (-)
WHITE
GREEN
TLR/TLRP2/TLRP3 Wiring (120V-480V)*
Hi-Lo Switching Option (HL30/HL50) Wiring120/240/277V. When red is energized, light output will beat "Lo" level.
SURGEPROTECTOR
BLACK
WHITE
BARE
ORANGE
RED
L1
N
SPARE
L2
FROMFEEDCORD
RELAY
DRIVER(S) /LIGHT ENGINE
CAPPEDINSIDE
FIXTURE
* (347/480V with 5G350 has a transformer - not shown)
Page 11 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Ouray 500
39 16"
91m
m
C L
31 2"89
mm
C L
35 8"92
mm
C L
OUR
AY
400
OUR
AY
500
OUR
AY
600
REV
ISIO
NS
REV
.EC
ND
ESC
RIPT
ION
DA
TEBY
APP
R BY
DREV.
MA
TERI
AL:
SEE
BO
M
PRO
DUC
T SE
RIES
:
R
DWG
SIZ
E
THIS
DRA
WIN
G IS
THE
PRO
PERT
Y O
F SE
LUX
CO
RPO
RATIO
N A
ND
IS
PRO
TEC
TED
BY
CO
PYRI
GHT
LA
W. I
T M
AY
ON
LY B
E C
OPI
ED O
R RE
PRO
DUC
ED W
ITH P
RIO
R, W
RITT
EN A
UTHO
RIZA
TION
FO
R TH
E PU
RPO
SE O
F M
AN
UFA
CTU
RIN
G A
ND
/OR
SUBM
ISSI
ON
FO
R SE
LUX
CO
RPO
RATIO
N.
DW
G. #
: IM
SFI
NIS
H:
OUR
AY
- IM
S SE
NSO
R V
IEW
S
T (8
45) 6
91-7
723
F (8
45) 6
91-6
749
DA
TE: 1
1/26
/201
8
SCA
LE: 1
:2
DRA
WN
BY:
SHEE
T: 1
OF
1
TOLE
RAN
CES
UN
LESS
OTH
ERW
ISE
NO
TED
:D
ECIM
AL
INC
H:
.XX
.02"
.X
XX
.010
"
DEC
IMA
L M
ETRI
C:
X.X
.5
X.XX
.25
FRA
CTIO
NS:
1/
32 [.
79m
m]
AN
GUL
AR:
1
1/2
5 LU
MEN
LA
NE
P.O
. BO
X 10
60HI
GHL
AN
D, N
Y 12
528
CHE
CKE
D B
Y:
APP
ROV
ED B
Y:
Internal Motion Sensor (IMS Option)• WattStopper FSP-211• WattStopper FSP-L3• FSIR-100 Remote (supplied separately)
FSIR-100 Remote3 9/16(91mm)
TWIST LOCK RECEPTACLE WITH PHOTOCELL (TLRP)
212 "
63mm
Ă 2 78 "
74mm
Ø 2 7/8” (74mm)
2 1/2” (63mm)
TWIST LOCK RECEPTACLE (TLR)
2 38 "
60mm
Ă 2 78 "
73mm
Ø 2 7/8”(73mm)
2 3/8”(60mm)
Optional Accessories(TLPC) 3-Pin Twist Lock Receptacle with Photocell (TLR) 7-Pin Twist Lock Receptacle with shorting cap
TLR = 7-Pin Twist Lock Receptacle with Shorting Cap TLPC = TE Connectivity BF Series (BF-PV) 3-Pin
(REC) GFCI RECEPTACLE DETAIL (120V)
(REC2) PADLOCKABLE IN-USE GFCI RECEPTACLE DETAIL (120V)
5/8” (15mm)
2 3/4” (70mm)
4 1/2” (114mm)
Pole (Generic View)
Cover shown in the closed position
(REC) GFCI RECEPTACLE DETAIL (120V)
(REC2) PADLOCKABLE IN-USE GFCI RECEPTACLE DETAIL (120V)
3 9/16” (91mm)
6 11/16” (170mm)
Pole (Generic View)
Cover shown in the closed position
2 1/4” (58mm)
REC and REC3 REC2 and REC4
GFCI Receptacle (REC) - 120V 15A GFCI duplex receptacle with weatherproof, self-closing cover; located 36” (915mm) o.c. from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel (120V only).
USB & Duplex Receptacle (REC3) (not shown) - 120V 20A duplex receptacle with USB combination ports. (1) type A and (1) type C high power 5A, 5V USB outlets. With weatherproof, self-closing cover; located 36” (915mm) o.c. from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel.
REC3 does not incorporate GFCI (Ground Fault Circuit Interrupter) protection, and shall be powered by a GFCI protected branch circuit (by others).
GFCI Receptacle (REC2) - 120V 15A GFCI duplex receptacle with weatherproof, self-closing, padlockable in-use cover; located 36” (915mm) o.c. from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel (120V only).
USB & Duplex Receptacle (REC4) (not shown)- 120V 20A duplex receptacle with USB combination ports. (1) type A and (1) type C high power 5A, 5V USB outlets. With weatherproof, self-closing padlockable in-use cover; located 36” (915mm) o.c. from base of pole, in-line with hand hole. Receptacle is intended only for portable tools or other portable equipment to be connected to outlet only when attended by operating personnel.
REC4 does not incorporate GFCI (Ground Fault Circuit Interrupter) protection, and shall be powered by a GFCI protected branch circuit (by others).
Page 12 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
12"305.00
OVERALLPOLEHEIGHT
Hand Hole Location
TYPE 27 (270°)
TYPE 18 (180°)
TYPE 09 (90°)
HAND HOLELOCATION
TYPE 00 (0°)
TOP VIEW
SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0°IN 90° INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)
DREV.
DWG SIZE
TYPE 27 (270Ā)
TYPE 18 (180Ā)
TYPE 09 (90Ā)
HAND HOLDLOCATION
TYPE 00 (0Ā)
TOP VIEW
SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0ĀIN 90Ā INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)
POLE DEPICTED IS GENERIC PLEASEREFERENCE CUSTOMER ORDER
FOR SPECIFIC POLE MODEL NUMBERTYPE 18 SHOWN
SCALE: 1:16
ADRAWN BY: FAH
DRW
JLJ
REVISIONSREV. ECN DESCRIPTION DATE BY APPR BY
01 XXXX CREATED FOR MARKETING 09/21/2016 FAH DRW
A 0017.17TO DETAIL MODIFICATION TOPOLES AND COLUMNS FOR
SENSOR MOUNTING ORIENTATIONLOGIC
07/12/2017 FAH DRW
12"305.00
NOMINALPOLE
HEIGHTMINUS 12"
NOMINALPOLE HEIGHT
HAND HOLELOCATIONA
4 X Ă .136 3.45 THRU8-32 UNC THRU
2 X Ă .188 4.76 THRU
2.00050.80
3.00076.20
1.00025.40
.50012.70
3.50088.90
3.25082.55
1.62541.28
1.75044.45
1.00025.40
DETAIL ASCALE 1 : 1
MATERIAL: SEE BOM
PRODUCT SERIES:
R
THIS DRAWING IS THE PROPERTY OF SELUX CORPORATION AND ISPROTECTED BY COPYRIGHT LAW. IT MAY ONLY BE COPIED ORREPRODUCED WITH PRIOR, WRITTEN AUTHORIZATION FOR THEPURPOSE OF MANUFACTURING AND/OR SUBMISSION FOR SELUXCORPORATION.
DWG. #: 6-48B323-00FINISH: PER SO
EXTERIOR SENSOR POLE MOD REFERENCE
T (845) 691-7723F (845) 691-6749
DATE: 9/21/2016
SHEET:1 OF 2
TOLERANCES UNLESS OTHERWISE NOTED:DECIMAL INCH:
.XX ā .02"
.XXX ā .010"
DECIMAL METRIC:
X.X ā .5X.XX ā .25
FRACTIONS: ā 1/32 [.79mm] ANGULAR: ā 1 1/2 Ā
5 LUMEN LANEP.O. BOX 1060HIGHLAND, NY 12528
CHECKED BY:
APPROVED BY:
ES01
A
General Pole Drawing For Example Only
TYPE 27 (270°)
TYPE 18 (180°)
TYPE 09 (90°)
HAND HOLELOCATIONTYPE 00 (0°)
TOP VIEW
SENSOR ANGULAR ORIENTATION FROM HAND HOLE 0°90° INCREMENTS CLOCKWISE AROUND POLE (TYPE 00,09,18,27)
Sensor angular orientation from hand hole 0°
90° increments clockwise around pole (Type 00,09,18,27)
OverallPole
Height
Pole Motion Sensor
The Selux outdoor rated sensor incorporates Passive Infrared (PIR) technology for motion sensing and also includes a built in photocell. Designed to mount directly through a 1/2” KO in a single gang faceplate on pole/column, the SBO utilizes 100% Digital Passive Infrared (PIR) technology that is tuned for walking size while preventing false tripping from the environment.
Series Optics Hand Hole Orientation Program Color Photocell
Feature Voltage
MS
Motion Sensor
1 270° coverage - Single Sensor
00D0 (0V=0%)
WH WhiteY Yes UNV
09 D1 (1V=10%) BK Black N No 347
18 D3 (3V=30%)BZ Bronze
480
27 D5 (5V=50%)
NOTE: Motion sensor comes programmed at 30% dimmed level with a 5 min. delay as default. All programming required after shipping by others.
12”(305mm)
Ouray 500
Page 13 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
• 100% Digital PIR Detection, excellent RF Immunity
• 270° coverage pattern
• Up to 30ft mounting
• IP66 Rated for outdoor applications
• Built-in 1kV surge protection
• No minimum load requirements
• Made for LED light source
• Interchangeable hot and load wires - impossible to wire backwards
• Adjustable time delays, max/min dim levels and ramp rates
• Programming button accessible without opening sensor or removing gaskets
• No field calibration or sensitivity adjustments required
• Non-volatile setting memory
• Convenient test mode
• Suitable for Title 24 applications
Motion Sensor Wiring Diagram
Pole Motion Sensor
LINECORD
BLKWHTBLKVIO
SBO SENSORGRY
GRN
WH
T
BLK
BLK
WH
TG
RN RED
ORG
BLK
WH
TG
RN
ORGRE
D
FIXT
URE
FEED
CO
RD
WEATHERPROOF WIRE CONNECTOR,600V 18-8GA
(SUPPLIED)
ATTACH CORD TO BACK OF SENSOR MOUNTING PLATEWITH 2 ZIP TIES (NOT SUPPLIED)
Ouray 500
Page 14 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Photometry
Catalog #: U5-R1-XX-XX-5G350-30-XX-UNV Delivered Lumens: 4931lmInput Watts: 43W Efficacy: 112 lm/WCCT: 3000KCRI (Ra): >80Maximum candela of 2661 at 45° from vertical.IES classification: Type IIMounting Height: 16’ (4.9 m)BUG Rating: B1-U0-G1Power Factor: 0.990Total Harmonic Distortion: 10.5%
R1 Optics / 43W LED / 3000K CCT
Catalog #: U5-R2-XX-XX-5G350-30-XX-UNV Delivered Lumens: 4974lmInput Watts: 43W Efficacy: 113 lm/WCCT: 3000KCRI (Ra): >80Maximum candela of 2603 at 62.5° from vertical.IES classification: Type IIIMounting Height: 16’ (4.9 m)BUG Rating: B1-U0-G1Power Factor: 0.990Total Harmonic Distortion: 10.5%
R2 Optics / 43W LED / 3000K CCT
Catalog #: U5-R3-XX-XX-5G350-30-XX-UNV Delivered Lumens: 4882lmInput Watts: 43W Efficacy: 111 lm/WCCT: 3000KCRI (Ra): >80Maximum candela of 3120 at 60° from vertical.IES classification: Type IIIMounting Height: 16’ (4.9 m)BUG Rating: B1-U0-G1Power Factor: 0.990Total Harmonic Distortion: 10.5%
R3 Optics / 43W LED / 3000K CCT
Ouray 500
Page 15 of 15 (Rev. 02/2021) ORY5_ss_v15.5
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Catalog #: U4-R3W-5G350-30-XX-UNV Delivered Lumens: 12036lmInput Watts: 126W Efficacy: 96 lm/WCCT: 3000KCRI (Ra): >80Maximum candela of 4092 at 40° from vertical.IES classification: Type VSMounting Height: 16’ (4.9 m)BUG Rating: B3-U0-G1Power Factor: 0.990Total Harmonic Distortion: 10.5%
R3W Optics / 126W LED / 3000K CCT
Photometry
Ouray 500
Catalog #: U5-R4-XX-XX-5G350-30-XX-UNV Delivered Lumens: 4848lmInput Watts: 43W Efficacy: 110 lm/WCCT: 3000KCRI (Ra): >80Maximum candela of 3359 at 62.5° from vertical.IES classification: Type IIIMounting Height: 16’ (4.9 m)BUG Rating: B1-U0-G1Power Factor: 0.990Total Harmonic Distortion: 10.5%
R4 Optics / 43W LED / 3000K CCT
Catalog #: U5-PP-XX-XX-5G350-30-XX-UNV Delivered Lumens: 4312lmInput Watts: 43W Efficacy: 98 lm/WCCT: 3000KCRI (Ra): >80Maximum candela of 2342 at 55° from vertical.IES classification: Type IIIMounting Height: 16’ (4.9 m)BUG Rating: B1-U0-G1Power Factor: 0.990Total Harmonic Distortion: 10.5%
PP Optics / 43W LED / 3000K CCT