Bluetooth mucisc LED Ceiling Lamp

Data Sheet of Instructions

Lightac Industry Co.,LimitedSupplier of idea energy saving LED Lamp

www.lightac.netsales@lightac.com

Index

1. General introduction------------------------------------------32. Product Photo---------------------------------------------------33. Product parameter---------------------------------------------54. Product Description--------------------------------------------65. Packing List------------------------------------------------------76. Lamp Installtion-------------------------------------------------87. F&Q--------------------------------------------------------------12

-

1.General introduction

Thanks for choosing our series of bluetooth music LED Ceiling Lamp,Pleaserefer to this data sheet of instruction before using our lamp, to ensure thecorrect application you do.This lamp is suit for the bedroom, Bathroom,Studying Room,and other similarplaces,depending on the controller,you can easy to adjust the lamp colortemperature and brightness,at the same time,through the inside Bluetooth onlamp,it can play the music which come from the phones,PC,and other digitaldevices’ music which has bluetooth function,bring you the onesoft,healthy,happy comfortable time.

2.Product Photo

Lamp Pictures：

Plastic expansion

Self tapping screw

Lamp Body

-

Controller Picture:

ControllerPicture

on/offSleep mode

Bright＋/ Sound＋

Music Mode

Lamp Mode

CCT＋/ Next Song

Entire Bright

Mode/Play Pause

CCE ‐ / PREV Song

Bright ‐ / Sound ‐

-

3.Parameter

Table

1

No. Part Bluetooth Music LED Ceiling Lampmain specification

1

WholeLamp

Whole LampWatts

< 35W，standby power＜1W

2 Input Voltage 100～260VAC

3 Protection With overload 3A、short-circuitprotection

4 Power Factor PF≥0.9

5 Efficiency ≥85%

6 WorkingTemperature

-20～45

7

LampPart

Lamp Watts 3W～24W

8 CCT 3000K～6000K

9 On / off mode By hand、infrared remote control

11 IR ControlDistance

8m based on no obstacles

12

Audio(Music)

Horn 2.75inch

13 Rated Watts 8W

14 nominalimpedance

6Ω

15 FrequencyDistance

120Hz～20Khz

16 total harmonicdistortion

≤5%

17 BluetoothDistance

10m based on no obstacles

-

4.Product Description

4.1:Lamp Mode：

1. first to connect the power, LED lamp brightness is day white 100%,and thenyou can use the controller to adjust brightness and color temperature(CCT) whichyou want.2.Under any modes, you can directly press lamp mode to fast enter the mode theLED lamp,And the 4 navigating keys can adjust the brightness and colortemperature (CCT).3.On/off key is whole key function,that means you can turn on / off the LED lampand bluetooth under any modes

4.2：Bluetooth Mode：1.After LED Lamp connect the power, it will automatic open the bluetoothfunction,and then, turn on your phone or pad or such kind of the digitaldevices,search “DONNAHO” and connect,after success to connecting,it can playthe music on itself.2.Under any modes,press “bluetooth modes” key, it can fast to enter the bluetoothmodes,And the 4 navigating keys can adjust the sound and songs to play.3.Long time to press “on/off”key can dis-connect the bluetooth,and it can connectthe new devices of bluetooth4.Long time press “Bluetooth Mode” key can off the bluetooth function

4.3：Sleep Mode：1. Under any modes,press “Sleep Mode”key,it can fast to enter the sleep

mode,LED Brightness will be 20%

4.4：Entire Brightness Mode1. Under any modes,press”entire brightness mode”key, it can fast to enter the the

entire brightness,brightness will be 100%

-

5.Packing List

Table

2

No Part Quantity Specification Remark

1 Lamp 1 PCS

2 Plasticexpansion

4 PCS

3 Self tappingscrew

4 PCS ST4.2*16，Cross head Fix Lamp

5 Controller 1 PCS

6 Battery 1 Pair AAA/1.5V

8 Instructions 1 PCS

-

6. Lamp Installtion

※ Please prepare the screwdrive and electrodrill before the installation.

7.1天花板打孔、标识定位点

6.1 install pre-kit

First to make the hole by electrodrill,put the plastic expansion inside thehole,and tap into them.

P i c t u r e - 1

Plastic expansion &4PCS

-

6.2 Wiring

Connect the wire which come from the ceiling part

P i c t u r e - 2

Attention：Red or Brown connect “L”，Blue or Black Connect “N”；

-

6.3 Fixed

After the wire connect,and then fixed the bottom part with Self tapping screw

P i c t u r e - 3

-

6.4 Install all

After fixed bottom part install lamp shell and horn etc.

Picture- 4

-

7.F&Q

Question Answer

No soundPlease confirm the bluetooth is on,and connect issuccess,Please confirm if the sound is smallest.pleasepress the VOL＋to increase the volume.

Can notfindBluetoothsignal

check if the bluetooth is under the fast flash

condition,if yes, bluetooth will do the checking ,please

search again the “DONNHOA”and connect it ,if ask the

code,please input”0000”

No bright　Check i f connec t the power，to check if thesignal lamp is on when use controller.If confirm it connect the power, please check if the batteris on power for the controller.

Sound isnoisy

Please check the music file is OK.　Replace with other digital devices to check if it is work　Noisy may resu l t f rom message rece iv ing ,　Check if the installation is loosen.