Version: KITS-TDS-LMHAluR-Web-1016-eng

DESCRIPTION

APPLICATIONS

BENEFITS

- Eurofins Indoor Air Comfort Gold Standard - Easy to cut

- AS-Quality - Melting point of fibers > 1000 °C

- Resilient, strong and flexible - Without addition of silicon oil- Easy and quick to install

CERTIFICATS

Data sheet:Lamella matLMF AluR

Lamella Mat LMH AluR is non-combustible mineral wool roll with a tear resistant glass fibre reinforced aluminium foil. The vertical orientation of the mineral wool fibres ensures good compressive strength, while keeping flexibility and ease of handling.Due to a relatively low weight Lamella Mats LMH AluR eases the typical overhead installation on heating & ventilation ducts

Lamella Mat LMH AluR is recommended for thermal and fire-protection insulation of technical equipment such as:

Oct.2016

Thermal insulation for HVAC ducts with rectangular or circular geometry, Pipe works, Vessels, Heat accumulators

Erzeugnisse aus MINERALWOLLE

Version: KITS-TDS-LMHAluR-Web-1016-eng

DESCRIPTION

APPLICATIONS

BENEFITS

- Eurofins Indoor Air Comfort Gold Standard - Easy to cut

- AS-Quality - Melting point of fibers > 1000 °C

- Resilient, strong and flexible - Without addition of silicon oil- Easy and quick to install

CERTIFICATS

Data sheet:Lamella matLMF AluR

Lamella Mat LMH AluR is non-combustible mineral wool roll with a tear resistant glass fibre reinforced aluminium foil. The vertical orientation of the mineral wool fibres ensures good compressive strength, while keeping flexibility and ease of handling.Due to a relatively low weight Lamella Mats LMH AluR eases the typical overhead installation on heating & ventilation ducts

Lamella Mat LMH AluR is recommended for thermal and fire-protection insulation of technical equipment such as:

Oct.2016

Thermal insulation for HVAC ducts with rectangular or circular geometry, Pipe works, Vessels, Heat accumulators

Erzeugnisse aus MINERALWOLLE

Version: KITS-TDS-LMHAluR-Web-1016-eng

DESCRIPTION

APPLICATIONS

BENEFITS

- Eurofins Indoor Air Comfort Gold Standard - Easy to cut

- AS-Quality - Melting point of fibers > 1000 °C

- Resilient, strong and flexible - Without addition of silicon oil- Easy and quick to install

CERTIFICATS

Data sheet:Lamella matLMF AluR

Lamella Mat LMH AluR is non-combustible mineral wool roll with a tear resistant glass fibre reinforced aluminium foil. The vertical orientation of the mineral wool fibres ensures good compressive strength, while keeping flexibility and ease of handling.Due to a relatively low weight Lamella Mats LMH AluR eases the typical overhead installation on heating & ventilation ducts

Lamella Mat LMH AluR is recommended for thermal and fire-protection insulation of technical equipment such as:

Oct.2016

Thermal insulation for HVAC ducts with rectangular or circular geometry, Pipe works, Vessels, Heat accumulators

Erzeugnisse aus MINERALWOLLE

Version: KITS-TDS-LMHAluR-Web-1016-eng

DESCRIPTION

APPLICATIONS

BENEFITS

- Eurofins Indoor Air Comfort Gold Standard - Easy to cut

- AS-Quality - Melting point of fibers > 1000 °C

- Resilient, strong and flexible - Without addition of silicon oil- Easy and quick to install

CERTIFICATS

Data sheet:Lamella matLMF AluR

Lamella Mat LMH AluR is non-combustible mineral wool roll with a tear resistant glass fibre reinforced aluminium foil. The vertical orientation of the mineral wool fibres ensures good compressive strength, while keeping flexibility and ease of handling.Due to a relatively low weight Lamella Mats LMH AluR eases the typical overhead installation on heating & ventilation ducts

Lamella Mat LMH AluR is recommended for thermal and fire-protection insulation of technical equipment such as:

Oct.2016

Thermal insulation for HVAC ducts with rectangular or circular geometry, Pipe works, Vessels, Heat accumulators

Erzeugnisse aus MINERALWOLLE

Version: KITS-TDS-LMHAluR-Web-1016-eng

DESCRIPTION

APPLICATIONS

BENEFITS

- Eurofins Indoor Air Comfort Gold Standard - Easy to cut

- AS-Quality - Melting point of fibers > 1000 °C

- Resilient, strong and flexible - Without addition of silicon oil- Easy and quick to install

CERTIFICATS

Data sheet:Lamella matLMF AluR

Lamella Mat LMH AluR is non-combustible mineral wool roll with a tear resistant glass fibre reinforced aluminium foil. The vertical orientation of the mineral wool fibres ensures good compressive strength, while keeping flexibility and ease of handling.Due to a relatively low weight Lamella Mats LMH AluR eases the typical overhead installation on heating & ventilation ducts

Lamella Mat LMH AluR is recommended for thermal and fire-protection insulation of technical equipment such as:

Oct.2016

Thermal insulation for HVAC ducts with rectangular or circular geometry, Pipe works, Vessels, Heat accumulators

Erzeugnisse aus MINERALWOLLE

LMH AluR je tepelná izolácia vyrábaná z nehorľavej minerálnej vlny. Štruktúra pružných lamiel z minerálnej vlny v spojení s vystuženou Al fóliou umožňuje ľahké obalenie potrubia izoláciou na jeho zakrivených plochách s väčšími priemermi alebo aj obalenie valcových nádob bez nutnosti použitia dištančných a upevňovacích prvkov.

Izolačná lamela LMH AluR je odporúčaná na použitie ako tepelná izolácia a ochrana proti ohňu v technických zariadeniach typu:• Vzduchotechnické potrubie kruhového alebo obdĺžnikového prierezu• Potrubné rozvody• Akumulačné nádoby

• Zlatý certifikát kvality vnútorného prostredia Eurofins GOLD• AS Kvalita• Kompaktná, odolná a pružná izolácia• Jednoduchá a rýchla inštalácia

• Ľahko sa reže a tvaruje• Bod tavenia vlákien ≥ 1 000 °C• Bez prídavku silikónového oleja

POPIS

POužItIE

VýHODy

CERtIfIKáty

Technický list:lamelová izoláciaLMH AluR

jún 2017

Verzia: KI-TL/LMH-ALUR/CZ-160902

Lamella Forte LMH AluR

Properties Symbol UnitTest method/

Standards

Reaction to fire EN 13501-1

ϑ 10 50 100 150 200 250 °C EN 12667 http://dopki.com/T4305MPCPR

λ 0,037 0,044 0,056 0,070 0,088 0,109 W/(m·K)

≤ 250 AGI Q 132

≤ 80 EN 14706

AGI Q 132

EN 13468Water vapour diffusion resistance value

sd m EN 12086

Water absorption WP kg/m2 AGI Q 132

Melting point of fibres --- °C DIN 4102-17

Silicone free ---

Designation code MW EN 14303-T4-ST(+)250-WS1-MV1-CL10 EN 14303

Product range: Thickness: 20 - 140 mm

Length: 2.500 - 10.000 mm

Width: 500 or 1.000 mm Headoffice

Technical Solutions Europe

Knauf Insulation GmbH

Parkring 15-17

D-85748 Garching bei München

Production Plant

Knauf Insulation d.o.o.

Novi Marof

Croatia

www.knaufinsulation-ts.com

Handling & storage

All rights reserved, including those of photomechanical reproduction and storage in electronic media. Commercial use of the processes and work activities presented in this document is not permitted. Extreme caution was observed when putting together the information, texts and illustrations in this document. Nevertheless, errors cannot quite be ruled out. The publisher and editors cannot assume legal responsibility or any liability whatever for incorrect information and the consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of errors pointed out.

Go to product

≥ 1000

Produced without addition of silicone oil

≤ 1,0

Lamella Mat LMH AluR is easy to handle and easy to install. It is supplied wrapped in polyethylene foil which is designed for short term protection only. For longer term protection on site, it is recommended to store the product either indoors or under a roof and off the ground. Product information is mentioned on every pack.

About ECOSE® TechnologyKnauf Insulation mineral wool products with ECOSE® Technology benefit from a formaldehyde-free binder made from rapidly renewable bio-based materials instead of petroleum-based chemicals. The technology has been developed for Knauf Insulation’s mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or fire performance. Insulation products made with ECOSE® Technology contain no dye or artificial colours – the colour is completely natural.

Declared material properties are obtained in the production process and ensured by the factory production control in accordance with the European Standard at the time of manufacture.Observing storage and handling guidelines will maintain performance within published tolerances.

* reaction to fire for 20 mm thickness: A2

AS-Quality --- ≤ 10 ppm

> 100

non- combustible / A1* Declaration of performance

Thermal conductivity in relation to temperature

Maximum servicetemperature

ST(+) °CMineral wool side

Aluminium side

Description/Data

Lamella Forte LMH AluR

Properties Symbol UnitTest method/

Standards

Reaction to fire EN 13501-1

ϑ 10 50 100 150 200 250 °C EN 12667 http://dopki.com/T4305MPCPR

λ 0,037 0,044 0,056 0,070 0,088 0,109 W/(m·K)

≤ 250 AGI Q 132

≤ 80 EN 14706

AGI Q 132

EN 13468Water vapour diffusion resistance value

sd m EN 12086

Water absorption WP kg/m2 AGI Q 132

Melting point of fibres --- °C DIN 4102-17

Silicone free ---

Designation code MW EN 14303-T4-ST(+)250-WS1-MV1-CL10 EN 14303

Product range: Thickness: 20 - 140 mm

Length: 2.500 - 10.000 mm

Width: 500 or 1.000 mm Headoffice

Technical Solutions Europe

Knauf Insulation GmbH

Parkring 15-17

D-85748 Garching bei München

Production Plant

Knauf Insulation d.o.o.

Novi Marof

Croatia

www.knaufinsulation-ts.com

Handling & storage

All rights reserved, including those of photomechanical reproduction and storage in electronic media. Commercial use of the processes and work activities presented in this document is not permitted. Extreme caution was observed when putting together the information, texts and illustrations in this document. Nevertheless, errors cannot quite be ruled out. The publisher and editors cannot assume legal responsibility or any liability whatever for incorrect information and the consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of errors pointed out.

Go to product

≥ 1000

Produced without addition of silicone oil

≤ 1,0

Lamella Mat LMH AluR is easy to handle and easy to install. It is supplied wrapped in polyethylene foil which is designed for short term protection only. For longer term protection on site, it is recommended to store the product either indoors or under a roof and off the ground. Product information is mentioned on every pack.

About ECOSE® TechnologyKnauf Insulation mineral wool products with ECOSE® Technology benefit from a formaldehyde-free binder made from rapidly renewable bio-based materials instead of petroleum-based chemicals. The technology has been developed for Knauf Insulation’s mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or fire performance. Insulation products made with ECOSE® Technology contain no dye or artificial colours – the colour is completely natural.

Declared material properties are obtained in the production process and ensured by the factory production control in accordance with the European Standard at the time of manufacture.Observing storage and handling guidelines will maintain performance within published tolerances.

* reaction to fire for 20 mm thickness: A2

AS-Quality --- ≤ 10 ppm

> 100

non- combustible / A1* Declaration of performance

Thermal conductivity in relation to temperature

Maximum servicetemperature

ST(+) °CMineral wool side

Aluminium side

Description/Data

Lamella Forte LMH AluR

Properties Symbol UnitTest method/

Standards

Reaction to fire EN 13501-1

ϑ 10 50 100 150 200 250 °C EN 12667 http://dopki.com/T4305MPCPR

λ 0,037 0,044 0,056 0,070 0,088 0,109 W/(m·K)

≤ 250 AGI Q 132

≤ 80 EN 14706

AGI Q 132

EN 13468Water vapour diffusion resistance value

sd m EN 12086

Water absorption WP kg/m2 AGI Q 132

Melting point of fibres --- °C DIN 4102-17

Silicone free ---

Designation code MW EN 14303-T4-ST(+)250-WS1-MV1-CL10 EN 14303

Product range: Thickness: 20 - 140 mm

Length: 2.500 - 10.000 mm

Width: 500 or 1.000 mm Headoffice

Technical Solutions Europe

Knauf Insulation GmbH

Parkring 15-17

D-85748 Garching bei München

Production Plant

Knauf Insulation d.o.o.

Novi Marof

Croatia

www.knaufinsulation-ts.com

Handling & storage

All rights reserved, including those of photomechanical reproduction and storage in electronic media. Commercial use of the processes and work activities presented in this document is not permitted. Extreme caution was observed when putting together the information, texts and illustrations in this document. Nevertheless, errors cannot quite be ruled out. The publisher and editors cannot assume legal responsibility or any liability whatever for incorrect information and the consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of errors pointed out.

Go to product

≥ 1000

Produced without addition of silicone oil

≤ 1,0

Lamella Mat LMH AluR is easy to handle and easy to install. It is supplied wrapped in polyethylene foil which is designed for short term protection only. For longer term protection on site, it is recommended to store the product either indoors or under a roof and off the ground. Product information is mentioned on every pack.

About ECOSE® TechnologyKnauf Insulation mineral wool products with ECOSE® Technology benefit from a formaldehyde-free binder made from rapidly renewable bio-based materials instead of petroleum-based chemicals. The technology has been developed for Knauf Insulation’s mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or fire performance. Insulation products made with ECOSE® Technology contain no dye or artificial colours – the colour is completely natural.

Declared material properties are obtained in the production process and ensured by the factory production control in accordance with the European Standard at the time of manufacture.Observing storage and handling guidelines will maintain performance within published tolerances.

* reaction to fire for 20 mm thickness: A2

AS-Quality --- ≤ 10 ppm

> 100

non- combustible / A1* Declaration of performance

Thermal conductivity in relation to temperature

Maximum servicetemperature

ST(+) °CMineral wool side

Aluminium side

Description/Data

Lamella Forte LMH AluR

Properties Symbol UnitTest method/

Standards

Reaction to fire EN 13501-1

ϑ 10 50 100 150 200 250 °C EN 12667 http://dopki.com/T4305MPCPR

λ 0,037 0,044 0,056 0,070 0,088 0,109 W/(m·K)

≤ 250 AGI Q 132

≤ 80 EN 14706

AGI Q 132

EN 13468Water vapour diffusion resistance value

sd m EN 12086

Water absorption WP kg/m2 AGI Q 132

Melting point of fibres --- °C DIN 4102-17

Silicone free ---

Designation code MW EN 14303-T4-ST(+)250-WS1-MV1-CL10 EN 14303

Product range: Thickness: 20 - 140 mm

Length: 2.500 - 10.000 mm

Width: 500 or 1.000 mm Headoffice

Technical Solutions Europe

Knauf Insulation GmbH

Parkring 15-17

D-85748 Garching bei München

Production Plant

Knauf Insulation d.o.o.

Novi Marof

Croatia

www.knaufinsulation-ts.com

Handling & storage

All rights reserved, including those of photomechanical reproduction and storage in electronic media. Commercial use of the processes and work activities presented in this document is not permitted. Extreme caution was observed when putting together the information, texts and illustrations in this document. Nevertheless, errors cannot quite be ruled out. The publisher and editors cannot assume legal responsibility or any liability whatever for incorrect information and the consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of errors pointed out.

Go to product

≥ 1000

Produced without addition of silicone oil

≤ 1,0

Lamella Mat LMH AluR is easy to handle and easy to install. It is supplied wrapped in polyethylene foil which is designed for short term protection only. For longer term protection on site, it is recommended to store the product either indoors or under a roof and off the ground. Product information is mentioned on every pack.

About ECOSE® TechnologyKnauf Insulation mineral wool products with ECOSE® Technology benefit from a formaldehyde-free binder made from rapidly renewable bio-based materials instead of petroleum-based chemicals. The technology has been developed for Knauf Insulation’s mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or fire performance. Insulation products made with ECOSE® Technology contain no dye or artificial colours – the colour is completely natural.

Declared material properties are obtained in the production process and ensured by the factory production control in accordance with the European Standard at the time of manufacture.Observing storage and handling guidelines will maintain performance within published tolerances.

* reaction to fire for 20 mm thickness: A2

AS-Quality --- ≤ 10 ppm

> 100

non- combustible / A1* Declaration of performance

Thermal conductivity in relation to temperature

Maximum servicetemperature

ST(+) °CMineral wool side

Aluminium side

Description/Data

Lamella Forte LMH AluR

Properties Symbol UnitTest method/

Standards

Reaction to fire EN 13501-1

ϑ 10 50 100 150 200 250 °C EN 12667 http://dopki.com/T4305MPCPR

λ 0,037 0,044 0,056 0,070 0,088 0,109 W/(m·K)

≤ 250 AGI Q 132

≤ 80 EN 14706

AGI Q 132

EN 13468Water vapour diffusion resistance value

sd m EN 12086

Water absorption WP kg/m2 AGI Q 132

Melting point of fibres --- °C DIN 4102-17

Silicone free ---

Designation code MW EN 14303-T4-ST(+)250-WS1-MV1-CL10 EN 14303

Product range: Thickness: 20 - 140 mm

Length: 2.500 - 10.000 mm

Width: 500 or 1.000 mm Headoffice

Technical Solutions Europe

Knauf Insulation GmbH

Parkring 15-17

D-85748 Garching bei München

Production Plant

Knauf Insulation d.o.o.

Novi Marof

Croatia

www.knaufinsulation-ts.com

Handling & storage

All rights reserved, including those of photomechanical reproduction and storage in electronic media. Commercial use of the processes and work activities presented in this document is not permitted. Extreme caution was observed when putting together the information, texts and illustrations in this document. Nevertheless, errors cannot quite be ruled out. The publisher and editors cannot assume legal responsibility or any liability whatever for incorrect information and the consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of errors pointed out.

Go to product

≥ 1000

Produced without addition of silicone oil

≤ 1,0

Lamella Mat LMH AluR is easy to handle and easy to install. It is supplied wrapped in polyethylene foil which is designed for short term protection only. For longer term protection on site, it is recommended to store the product either indoors or under a roof and off the ground. Product information is mentioned on every pack.

About ECOSE® TechnologyKnauf Insulation mineral wool products with ECOSE® Technology benefit from a formaldehyde-free binder made from rapidly renewable bio-based materials instead of petroleum-based chemicals. The technology has been developed for Knauf Insulation’s mineral wool products, enhancing their environmental credentials without affecting the thermal, acoustic or fire performance. Insulation products made with ECOSE® Technology contain no dye or artificial colours – the colour is completely natural.

Declared material properties are obtained in the production process and ensured by the factory production control in accordance with the European Standard at the time of manufacture.Observing storage and handling guidelines will maintain performance within published tolerances.

* reaction to fire for 20 mm thickness: A2

AS-Quality --- ≤ 10 ppm

> 100

non- combustible / A1* Declaration of performance

Thermal conductivity in relation to temperature

Maximum servicetemperature

ST(+) °CMineral wool side

Aluminium side

Description/Data

LMH AluR

Technický parameter

Súèinite¾ tepelnej vodivosti v závislosti od teploty

0,037 pri 10 °C0,044 pri 50 °C0,056 pri 100 °C0,070 pri 150 °C0,088 pri 200 °C0,109 pri 250 °C

W/(m . K) EN 12667λ

Maximálna prevádzková teplota ST(+) 250* EN 14706

EN 823

EN 13501-1

DIN 4102-17

EN 1602

EN 12086

EN 13468

–

EN 14303

T4

A1

≥ 1 000

≤ 1,0 (WS1) kg/m2

m

ppm

–

> 100

≤ 10

Výroba bez prídavku silikónového oleja

–

–

–

MW EN 14303-T4-ST(+)250-WS1-MV1-CL10

Wp

Sd

–

τt

Trieda tolerancie hrúbky

Trieda reakcie na oheò

Bod tavenia vlákien

Nasiakavosś

Ekvivalentná difúzna hrúbka (fólia)

Obsah silikónu

Kód znaèenia

AS-Kvalita

Symbol Jednotka NormaTrieda/Hodnota

Vlastnosti

* pre povrch na strane fólie ≤ 80 °C

Výrobné rozmery

Manipulácia a skladovanie

Hrúbka: 25 – 140 (mm)Dĺžka: 2 500 – 10 000 (mm)Šírka: 500 alebo 1 000 (mm)

Izolácie LMH AluR sú dodávané v PE obaloch, ktoré sú určené len na krátkodobú ochranu. Materiál musí byť skladovaný na suchom mieste bez vystavenia vplyvu priameho slnečného žiarenia. Informácie o produkte sú uvedené na každom balení.

Všetky práva vyhradené vrátane fotoreprodukcie a uloženia na elektronických nosièoch. Komerèné využitie pracovných postupov uvedených v tomto dokumente nie je povolené. Príprave tohto dokumentu bola venovaná maximálna pozornosś, napriek tomu nie je možné celkom vylúèiś výskyt prípadnej chyby. Vydavate¾ nepreberá žiadnu zodpovednosś za prípadné nesprávne informácie a ich dôsledky. Akéko¾vek podnety a pripomienky k obsahu tohto dokumentu sú vítané.

Knauf Insulation, s. r. o. železničný rad 24 968 14 Nová BaňaSlovenská republika

Zákaznícky servistel.: +421 45 68 33 512fax: +421 45 68 33 511www.knaufinsulation.skodbyt.sk@knaufinsulation.com

O technológii ECOSEVýrobky z minerálnej vlny Knauf Insulation, pri ktorých výrobe sa používa technológia ECOSE, prinášajú výhody bezformaldehydového spojiva z obnoviteľných zdrojov, ktoré nahrádzajú chemikálie na ropnej báze. táto technológia bola vyvinutá pre výrobky z mine-rálnej vlny Knauf Insulation na zvýšenie ich šetrnosti k životnému prostrediu bez zmeny tepel-notechnických, akustických alebo požiarnych vlastností. Materiál neobsahuje žiadne pridané farbivá – farebnosť minerálnej vlny je úplne prírodná.

Izolácie LMH AluR sú označené značkou CE, ktorá dokladuje splnenie všetkých kritérií podľa harmonizovanej normy EN 14303. Vyhlásenie o vlastnostiach a ostatná dokumentácia sú k dispozícii na www.knaufinsulation.sk.

Vyhlásenie o vlastnostiach

Web