data sheet metal detectors ms08-85 sqta

2
 QLC/QLCTA SQ/SQTA MS 08/85 SQ and SQTA MS 08/85 SQ SQ = Single sensor system for installation only below the belt. Typical use i n the Mining aggregate, Stone- and earth processing, Lime works, Clin ker works, Cement factories, Slag processing and Coal-burning power stations. Other sizes on request. MS 08/85 SQTA SQTA = two-part sensor sytem, installation below and above the belt, for large heights of material on conveyor. Typical use in the Mining aggregate, Stone- and earth processing, Lime works, Clinker works, Cement factories, Slag processing and Coal-burning power stations. Other sizes on request. H = max. burden deep + 100 mm. CONTROL UNIT Technical data: Nominal size A mm B mm Belt wide mm Weight kg 500 700 400 500 18 650 850 400 650 24 800 1000 400 800 28 800 1250 500 1000 44 1200 1 500 500 1200 52 1400 1 700 500 1400 60 1600 1 900 500 1600 96 1800 2100 650 1800 130 2000 2300 650 2000 142 Nominal size A mm B mm Belt wide mm Weight kg 500 700 400 500 46 650 850 400 650 57 800 1000 400 800 66 1000 1250 500 1000 100 1200 1500 500 1200 118 1400 1700 500 1400 147 1600 1900 500 1600 227 1800 2100 650 1800 296 2000 2300 650 2000 321 Page 1 of 2 Professionel Metal Detectors from EAB 15.06.2010 http://www.eabreinhausen.de/eu/ms0885_eu.htm

Upload: akshay-kadbe

Post on 30-Oct-2015

903 views

Category:

Documents


54 download

TRANSCRIPT

Page 1: Data Sheet Metal Detectors MS08-85 SQTA

7/15/2019 Data Sheet Metal Detectors MS08-85 SQTA

http://slidepdf.com/reader/full/data-sheet-metal-detectors-ms08-85-sqta 1/2

  QLC/QLCTA 

SQ/SQTA 

MS 08/85 SQ and SQTA

MS 08/85 SQ

SQ = Single sensor system for installation only below the belt. Typical use in the Mining aggregate,

Stone- and earth processing, Lime works, Clinker works, Cement factories, Slag processing andCoal-burning power stations.

Other sizes on request.

MS 08/85 SQTA

SQTA = two-part sensor sytem, installation below and above the belt, for large heights of material onconveyor. Typical use in the Mining aggregate, Stone- and earth processing, Lime works, Clinker works,Cement factories, Slag processing and Coal-burning power stations.

Other sizes on request.

H = max. burden deep + 100 mm.

CONTROL UNIT

Technical data: 

Nominalsize

Amm

Bmm

Belt widemm

Weightkg

500 700 400 500 18

650 850 400 650 24

800 1000 400 800 28

800 1250 500 1000 44

1200 1500 500 1200 52

1400 1700 500 1400 60

1600 1900 500 1600 96

1800 2100 650 1800 130

2000 2300 650 2000 142

Nominalsize

Amm

Bmm

Belt widemm

Weightkg

500 700 400 500 46

650 850 400 650 57

800 1000 400 800 66

1000 1250 500 1000 100

1200 1500 500 1200 118

1400 1700 500 1400 147

1600 1900 500 1600 2271800 2100 650 1800 296

2000 2300 650 2000 321

Page 1 of 2Professionel Metal Detectors from EAB

15.06.2010http://www.eabreinhausen.de/eu/ms0885_eu.htm

Page 2: Data Sheet Metal Detectors MS08-85 SQTA

7/15/2019 Data Sheet Metal Detectors MS08-85 SQTA

http://slidepdf.com/reader/full/data-sheet-metal-detectors-ms08-85-sqta 2/2

 [Home ] [Applications ] [Metal Detectors ] [Contact]

Power supply: 100 to 240 V, 50 to 60 Hz +/- 10%

Power required: 15 VA

Belt speed: 0,3 - 6,0 m/s

Ambient temp.: -20° C to +55° C

Protective class: IP 55

Design: Sheet steel

Mounting: prepared for wall mounting

Weight: 18 kg

Input: 1 coaxial cable (sensor link cable)

Color: RAL 7035 grey, treated by electrophoresis dipcoating

Outputs:Metal alarm, one relay with 1 potential free

nc/no-contact, switching capacity 230V/5A,ohmic load

Disturbance, one relay with 1 potential freenc/no-contact, switching capacity 230V/5A,ohmic load

Page 2 of 2Professionel Metal Detectors from EAB

15.06.2010http://www.eabreinhausen.de/eu/ms0885 eu.htm