d’alembert’s principle - indiana university bloomingtondermisek/cm_14/cm-5-4p.pdf · (all other...
TRANSCRIPT
Constrained motion and generalized coordinatesbased on FW-13
Often, the motion of particles is restricted by constraints,
constraints correspond to forces
and we want to:work only with independent degrees of freedom (coordinates)
eliminate forces of constraintk = 2k = 1 k = 2 (4)
Motion of N particles, n = 3N degrees of freedom, subject to k equations relating coordinates:
holonomic constraints
the system has n - k = 3N - k degrees of freedom!can be time dependent
66
any set of n - k = 3N - k independent coordinates that completely specify the system
Generalized coordinates:
cartesian coordinates subject to k constraints
change of a cartesian coordinate induced from changes in generalized coordinates in dt:
partial derivatives! (all other variables are kept constant)
or, in a compact way:
67
Virtual displacements:
are defined as infinitesimal, instantaneous displacements of the coordinates consistent with the constraints.
i = 1, ..., n
68
D’Alembert’s Principlebased on FW-14
forces of constraint are perpendicular to the direction of motion and thus they do no work
The forces of constraint do no work under a virtual displacement:
rotation about point 1
(perpendicular to tension)
We can rewrite Newton’s 2nd law as:
orapplied force reaction force (constraint)
D’Alembert’s principle:
forces of constraint have disappeared!
69
Lagrange’s equationsbased on FW-15
We want to rewrite D’Alembert’s principle in terms of the generalized coordinates.
The applied force piece:
The virtual work done by applied forces under virtual displacement
generalized forcescan be calculated directly from this definition, or from
computing the virtual work done by applied forces for virtual displacement along a given generalized coordinate
70
Juggling with time derivatives:
i i
only functions of q and tfunction of generalized coordinates, generalized
velocities and time - all physically independent variables! (if specified at a given time, subsequent motion of the system is determined)useful formulas:
other variables are kept constant when taking partial derivatives
the order of partial derivatives can be interchanged
71
The momentum piece:
kinetic energy:
72
Now we can rewrite D’Alembert’s principle in terms of the generalized coordinates:
kinetic energy
generalized forces
all q are independent and arbitraryLagrange’s equations:
n-k equations for n-k independent generalized coordinates(equivalent to Newton’s 2nd law)
73
For conservative forces (potential energy depends only on the position):
generalized forces are given by negative gradients with respect to corresponding generalized coordinate:
Lagrange’s equations for conservative forces:
Lagrangian
74
Using Lagrange’s equationsbased on FW-16
Pendulum:
pendulum equation, small small-amplitude approximation - oscillations with
θ is the generalized coordinate
.θ
75
Bead on a Rotating Wire Hoop:θ is the generalized coordinate
hoop rotates with constant angular velocity about an axis perpendicular to the plane of the hoop and passing through the edge of the hoop. No friction, no gravity.
pendulum equation
76
Moving inside a cone: A particle of mass m is constrained to move on the inside surface of a smooth cone of half-angle α. The particle is subject to a gravitational force. Determine a set of generalized coordinates and find Lagrange's equations of motion.
77
Rotating pendulum: The point of support of a simple pendulum of length b moves on a massless rim of radius a rotating with constant angular velocity ω. Find the equation of motion for the angle θ.
78
Pendulum with horizontally moving support:A simple pendulum of mass m2 with a mass m1 at the point of support which can move on a horizontal line in the plane in which m2 moves. Find the equation of motion for x and the angle ϕ.
79