D616/D640 4K Capture Box User Manual

1

Important Safety Instructions

Before using D616/D640 4K Capture Box, please ensure that you read and understand the safety precautions below:

1. Do not attempt to open the case of D616/D640 4K Capture Box or modify it in any way, as this will void the warranty. 2. Keep D616/D640 4K Capture Box away from water and other liquids, as this may cause the unit to malfunction. 3. D616/D640 4K Capture Box may become warm during use. This does not indicate malfunction. 4. Do not place heavy objects on D616/D640 4K Capture Box, as this may cause the unit to overheat and malfunction. 5. If the exterior of D616/D640 4K Capture Box requires cleaning, wipe it with a soft dry cloth. 6. Do not dispose of the unit via conventional domestic waste.

2

Table of Contents

Important Safety Instruction ................................................................ ………… 1

Table of Contents ................................................................................................ 2

What’s included .................................................................................................. 3

Product Connectors ........................................................................................... 4-5

Connection Instruction and installtion ................................................................... 6

Standalone Mode

1. Installation ............................................................................................... 6

2. Record / Capture to USB or TF Card .......................................................... 7

3. Set Up by OSD .......................................................................................... 7-9

PC Mode

1. Software Installation & Connection ......................................................... 10

2. PC Software (GXPlayer) registration & key features .................. …….. 11-13

Upload video to YouTube ............................................................................... 14-16

Live Streaming via XSplit .............................................................................. 17-19

Live Streaming via OBS ................................................................................. 20-22

Record / Capture to PC ................................................................................... 23-24

Schedule Recording & Set up ........................................................................... 24-25

New Firmware Upgrade Instruction .................................................................... 26

Product Specifications ......................................................................................... 27

Contact ............................................................................................................... 27

3

What's included

4

Product Connectors

1. Power on and REC/STOP button 2. DC input 5V/2A : DC jack for power adaptor 3. HDMI IN : HDMI input 1 4. HDMI input 2 (D616) / YPbPr input (D640) 5. AV/L/R IN: AV/Audio L/R cable 6. HDMI OUT : HDMI output 7. USB TO PC : MicroUSB for connecting to computer. 8. USB Storage : USB connector for USB HDD/USB Flash Drive 9. TF card (MicroSD) input : (Standalone mode only) 10. Line Out: Audio output 11. MIC: Microphone input 12. IR: Infrared Receiver for remote control 13. LED indicator for recording: - Blue: Recording videos in 1080p - Green: Recording videos in 720p.

5

6

Connection instruction and installations (Standalone Mode) 1. Installation

(1) Connect power adapter to DC jack ○2 of D616/D640 (2) Connect video source (PS, XBox, Blu-ray player) to D616/D640 by

HDMI: HDMI in ( D616: ○3 or ○4 / D640: ○3 )

AV: AV/L/R ○5

YPbPr: D640 ○4

(3) Connect D616/D640 from HDMI OUT ○6 to TV via HDMI cable.

(4) Plug the USB storage device into the USB ○8 of D616/D640 4K Capture Box.

7

2. Record/Capture to USB or TF card

(1) After all devices are connected properly, the power will switch on automatically.

(2) Press the REC/STOP button on the capture box or press the REC button on the remote control to start recording.

(3) Press the REC/STOP button again on the capture box or press the STOP button on the

remote control to stop recording. The recorded files will be saved to USB storage or TF (MicroSD) card NOTE: D616/D640 supports FAT32 & NTFS formats only. In FAT32, it will record a new file when the previous recording file reaches the maximum 2GB capacity, the maximun is 32GB for FAT; in NTFS there is no 2GB per file limitation D616/D640 will record as long as needed. When HDD or USB storage is full, D616/D640 stops recording and LED will go off. D616/D640 saves files in MPEG4 format. The resolution can be set at either 720p or 1080p for capture. Please note that not all games/video files are produced at 1080p. D616/640 will record approximately 1GB per 10mins at either 720p or l080p.

3. Setup by OSD (On Screen Display)

Press on the remote control to browse the menu settings of D616/D640 4K Capture Box System Time: Set the time of D616/D640 by year, month, day, hour and minute.

8

Schedule Recording: Allow you to preset recording up to 4 different schedules

OSD Language: Set the language to be displayed on the menu. English, Japanese, Simplified Chinese & Traditional Chinese are available.

9

Aspect Ratio: Auto, 4:3, 16:9, Zoom 1, Zoom 2 and Just Scan are available. The default is set as 16:9.

Software Update: Upgrade the firmware when there is a new version available. You need to download new firmware & save in USB storage, then connect to D616/D640 4K Capture Box Restore factory default: Restore the factory settings. Version: Shows the current version info.

Press on the remote control to browse the Bit Rate settings of D616/D640 4K Capture Box If you set it to a large value, you will get higher image quality, but with larger file size. If you set it to a small value, you will get lower image quality but with smaller file size. For example: LIMITED: 10M means the recorded file is limited to 2GB per file, bit rate is 10Mbps. UNLIMITED means there is no 2GB per file limitation

10

PC Mode

1. Software Installation & Connection

Install GXPlayer on PC Download the software GXPlayer from http://www.tevii.com/Support.asp or get it from the installation CD. Make sure you install the plugin for 3rd party streaming software (OBS, OBS studio, XSplit).

After the installation completed, please restart your computer first before using GXPlayer. Connect the devices

(1) Connect power adapter to DC jack ○2 of D616/D640 (2) Connect video source (PS, Xbox, Blu-ray player) to D616/D640 by

HDMI: HDMI in ( D616: ○3 or ○4 / D640: ○3 )

AV: AV/L/R ○5

YPbPr: D640 ○4

(3) Connect the Micro USB cable from D616/D640 ○7 to USB port of PC.

http://www.tevii.com/Support.asp

11

12

2. PC Software(GXPlayer) registration & Key features Please register GXPlayer online before using it or you can only record up to 10 minutes.

Run GXPlayer. Click on screen upright corner to open the "About" window. Then click on the "Register" button to open the "Register" window.

Fill in your Email address, Name and Code (The Code can be found on the CD cover as below) Then click on "OK" to finish the registration.

13

The software CD comes with famous video editing software Power Director licensed from Cyberlink. You can find the CD key on the back of CD cover

14

Upload Video to YouTube 1. GXPlayer Open below folder marked in red

2. Click below mark in red to stream recorded video to YouTube

15

3. Input google ID & Password

4. Edit the name & description of video which you paln to stream Upload

16

5. Uploading completed OK

6. Open YouTube My channelYou can find the video file you just uploaded

17

Live Streaming via XSplit

1. Download & open XSplit on your PC add webcam, capture card, video devices

GXPlayer Box

2. Outputs --> set up a new output --> (for example) Twitch

3. Enter ID, Password to Log In (please apply a new account for Twitch beforehand)

18

19

1. After set up completed，Click Outputs Twitch- tevii123 to start streaming

20

Live Streaming via OBS

Download & install the latest version of OBS and open it Select

“Settings”

1. Select “Stream ““Service” (website) Streamer Key OK

21

2. How to find your Stream Key (taking Twitch as example)

Open TwitchSelect Dashboard (A)Setings (B)Show Key (C)

3. Sources Add video capture deviceDevice option, select GXPlayer Box

22

4. Audio Output Mode Output desktop audio (DirectSound) OK

5. Press “Start Streaming”

23

Record/Capture to PC

1. After all devices are connected properly, run GXPlayer on your PC.

2. Click on to start recording; click again to stop recording.

You can also click on to capture a screenshot

24

3. Click on to view the recorded video files.

You can click on to play back selected recorded video.

Schedule Recording & Set up

25

Video Resolution: Set the recording resolution. 1080p, 720p and 480p are available. Video Bitrate: 6Mbps, 8Mbps, 10Mbps, 12Mbps, 15Mbps and 18Mbps are available. Video Render: Define the video render. Video Mix Render9 and Internal YUV Render are available. Hotkey for Recording: Set the hotkey for starting and stopping recording videos. MP4 Format: You are free to select MP4 Format as below: MP4(H264, AAC), MP4(H264, AC3), MP4(H264, MP3), MPEGTS(H264, AAC) Language: Set the language to be displayed on the screen. English, Japanese, Simplified Chinese and Traditional Chinese are available. Files Saved to Folder: Displays the saving path of recorded videos. You can change the saving path by clicking on the folder button. Automatically generate the file name when recording starts: If this option is selected, the titles of recorded videos will be named automatically. Set up maximum recording time: Set the maximum recording time. D616/640 will stop recording when the time reaches the maximum recording time. Schedule Recording: Allow you to preset recording up to 4 different schedules OK: Click to save the settings. Cancel: Click to exit the "Setup" window without saving the settings.

26

New Firmware Upgrade Instruction Upgrade Tool: please use a FAT32 formatted USB flash drive 1. Download & unzip the compressed file and copy the "MERGE.bin" to USB Flash Drive 2. Connect USB Flash Drive to D616/D640 3. Turn on power of D616/D640. Under OSD, select “Software Update (USB)” & press Yes 4. OSD will show the process of upgrading by percentage, do NOT unplug USB Flash Drive 5. After upgrade completed, please select “factory reset” from OSD

Supported Resolutions

27

PRODUCT SPECIFICATIONS Output format MP4 (H.264)

Video standards (input) NTSC, PAL,

Supported recording formats

FAT32, NTFS

Input HDMI, AV, Audio L/R, MIC / YPbPr (for D640)

Output HDMI (pass-through), USB, Micro USB, Line out

Bit Rate Max: 16Mbps

Recording capacity Maximum 2GB per file or unlimited

Maximum storage capacity

2TB (HDD), 32GB (USB Flash drive & TF Card)

Power supply DC 5V, 2A

Weight 104g

Dimensions 13 (L) x 8.5 (W) x 1.5 (H) cm

CONTACT • If you encounter problems about using and upgrading hardware and software,

please contact our support team: sales@tevii.com Please download the software GXPlayer http://www.tevii.com/Support.asp

mailto:sales@tevii.comhttp://www.tevii.com/Support.asp