d-link des-3326s config l3 ip networking
DESCRIPTION
D-LINK DES-3326S L3 Config (Manual)TRANSCRIPT
Technical Support Department
DESDES--3326S3326S
How to configure Layer 3 IP How to configure Layer 3 IP NetworkingNetworking
Technical Support Department
Layer 3 IP Networking
DES-3226S
Management Port
IP: 10.90.90.90
VLAN2 : VID2
IP:192.168.0.1
VLAN3 : VID3
IP:192.168.10.1
VLAN4 : VID4
IP:192.168.20.1
Technical Support Department
• Layer 3 VLANs must be configured on DES-3326S before they can be assigned IP subnets.
• The static VLAN configuration is specified on a per port basis.
Technical Support Department
1. Config 802.1Q VLANs
Technical Support Department
Detail Setting
Technical Support Department
• To setup IP Interfaces on the switch:
Go to the Advanced Setup folder, and click on the Layer 3 IP Networking link, and then click on the Setup IP Interfaces.
Technical Support Department
2. Setup IP Interface
Technical Support Department
3. Setup IP and Subnet Mask
Technical Support Department
4. CLI Configuration
config vl default delete 1:2-26
create vl vlan2 tag 2
config vl vlan2 ad enable add untagged 1:2-1:8
create vl vlan3 tag 3
config vl vlan3 ad enable add untagged 1:9-1:16
create vl vlan4 tag 4
config vl vlan4 ad enable add untagged 1:17-1:24
create ipif ip2 192.168.0.1/24 vlan2 state enable
create ipif ip3 192.168.10.1/24 vlan3 state enable
create ipif ip4 192.168.20.1/24 vlan4 state enable