d 1204014
TRANSCRIPT
8/12/2019 d 1204014
http://slidepdf.com/reader/full/d-1204014 1/2
D1204014 060604-P-004
Sheet 1 of 2
B
A
REV
OWNER Kuwait Oil Company (K.S.C) INQ. NO. 060604-0200-304-01
JOB TITLE Replacement of 9 Crude Oil Filling Lines Project DIC JOB NO. 060604
AL-AHLEIA SWITCHGEAR CO., KUWAIT ITEM NO. 105-MCC-101A,B
P/O NO. PO-060604-0200-304-001-A01 V/P NO.VP-PO-060604-0200-304-001-A01-105-MCC-101-007-B
VENDOR
DOCUMENT TITLE :
DAELIM INDUSTRIAL CO.,LTD
TECHNICAL SPECIFICATION FOR 440V SWITCHGEAR & MCC
JOB NO. 060604
A - APPROVED WITHOUT COMMENT
AAN - APPROVED AS NOTED
RFC - RETURN FOR CORRECTION
NA - NOT APPLICABLE
SIGNED BY : DATE :
DAELIM'S PERMISSION TO PROCEED OR REVIEW TAKEN ON
VENDOR PRINTS SHALL NOT RELIEVED VENDOR FROM ITS
RESPONSIBILITIES OR LIABILITIES UNDER PURCHASE ORDER.
BJ
27.08.07 ISSUED FOR APPROVAL RKK DC BJ
03.10.07REVISED AS PER CUSTOMER
COMMENTS DTD 17.09.07RKK DC
APPROVEDDATE DESCRIPTION PREPARED REVIEWED
8/12/2019 d 1204014
http://slidepdf.com/reader/full/d-1204014 2/2
D1204014 060604-P-004
sheet 2 of 2
TECHNICAL SPECIFICATION FOR 440V SWITCHGEAR & MCC(REF: KOC PROJECT FOR REPLACEMENT OF 9 CRUDE OIL FILLING LINES)
I:\USERS\DESIGN\FILES\KUWAIT\KOC\12704907\SUBMITTAL REV.2\D1204014-2.doc
440V LV Switchboards offered are cellular cubicle type, constructed from zinc coated,
phosphated and chromated sheet steel of thickness 2 mm. Outgoing unit rated up to 400A
will be housed in individual drawout cell of the Switchboard and feeders rated more than
400A will be housed in fixed cell. The door of each cell is provided with pad lockable rotary
handle which is interlocked with the controlling switch in the cell in such a way that the door
can be opened only when the switch is in "OFF" position. The board will be totally enclosed,
dust and vermin proof. The Switchboard is front operated and rear accessible for cable
termination. Incoming and outgoing cable entry/exit will be at bottom.
All metal work would be cleaned to remove scale, oil and grease before painting. The steel
work would be painted using electrostatic guns and powder paint of Light Grey Shade 10-A-
03 to BS 4800.
Busbars offered are hard drawn high conductivity electrolytic copper, tinned and insulated
with heat shrinkable PVC sleeves.
ACB’s & MCCBs offered are type tested by the manufacturer of the switching unit. Our
busbar system is type tested for short circuit withstand capacity at KEMA Lab., Netherlands
and also our offered switchboard will be tested at our works for all routine tests as per
BS/IEC. No other tests are envisaged in our offer.
The switchboard is designed for indoor use (Degree of Protection: IP42). Bolts, screws etc.
are of Zinc Plated finish only.
Approximate Overall Dimension of Switchboards will be:
Item no. Description Width x Depth x Height (in mm)
1. 440V Switchboard for CMM 8680 x 900 x 2500
(105-MCC-101A,B)
**********