G O N U M B E R O N E . . . G O S C H U L T E !

Keeps decks clean of field debris and straw.

Reduces fire hazards by keeping the clutch areas free of dry material.

Helps prevent weed or seed contamination from field to field.

Keeps workers mowing longer and not cleaning decks off.

Visual confirmation of properly operating drive shafts is made easier.

Reduces piles in the field from previous clean off areas.

Keep Your Cutter Clean and

Improve Efficiency

Cyclone Deck Debris Fan Kit

- Strategically Mounted -

1

2

3

4

5

6

Schulte Industries Ltd.,P.O. Box 70, Englefeld, Saskatchewan, Canada S0K 1N0Tel: (306) 287-3715 Fax: (306) 287-3355E-Mail: info@schulte.caVisit our Web site at: www.schulte.ca

Schulte Industries Ltd. reserves the right to change the design, material and specifications of its products without notice. Illustrations mayinclude optional equipment and accessories, and may not include all standard equipment. Part No. 1000-141

Sold By:

The Schulte Cyclone fan system will eliminate debris from buildingup on your mower decks.

The Cyclone fan system will help keep the area around yourcutter’s slip clutches free of debris. This reduces the fire hazardassociated with dry material being in close proximity to a slippingfriction clutch. The constant air flow from the Cyclone fans acrossthe gearboxes will help to keep the boxes cool during operation.

The Cyclone fan system assists in the prevention of weed or seedcontamination from field to field.

Cutter operators will be more productive as down time from therequirement to regularly clean the cutter off is eliminated. Thepiles of material created in the field from cleaning of the decksare also a thing of the past.

Operator run time is increased as he does not have to spend timecleaning the decks off prior to moving from field to field. Thisputs more $$$ in the farmers pockets!

Another added benefit to keeping the cutter decks free of debrisis that it will increase the service life of the safety shieldingwhich encompasses the drivelines. The top deck of the cutter willlook newer longer.

No weight build up on top of the deck which reduces stress onthe framework of the cutter.

Schulte is a registered trademark of Alamo Group Inc. Schulte Industries Ltd. reserves the right to change the design, specification of it’s products without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.

PRINTED IN CANADA PREPARED by NELSON GRAPHIC DESIGN 201101

Air flow Air flow

SPECIFICATIONS- Three 24" in-line fans with 8 blades- 3 Hydraulic Gear Motors- One hydraulic circuit and case drain required- Minimum of 11 gpm- Each fan will put out 8000 to 9600cfm