cyberspace lte
TRANSCRIPT
FEATURES OF LTEBY
CYBERSPACE DEPARTMENT OF TECHNICAL
OUTLINE
• Why LTE?
• LTE UE
• Cyberspace LTE
WHY LTE?
Higher spectrum efficiency drives cost-per-bit reduction.
LTE has higher spectrum efficiency than all the past data network, hence lower operation cost per bit. More bits are transmitted and received at a lower cost.
1. COST REDUCTION
WHY LTE?
Applications now have a very sky-high demand for high speed and low latency. Such as Mobile-TV, Online gaming, VoIP, Video-on-demand, See-you-see-me
2. NEXT GENERATION APPS
WHY LTE?
LTE has fewer network components and migration path is easier and cost effective.
3. SIMPLIFIED NETWORK ARCHITECTURE
WHY LTE?
LTE can run on wide range of bandwidth depending on the one that fits the operator technological and business model. The bandwidth; 1.25MHz, 3MHz, 5MHz, 10MHz, 15MHz and 20MHz.
4. SCALABLE BANDWIDTH
WHY LTE?
With LTE, you can have uninterrupted connection moving at high
speed of about 350Km/h, this is not possible with other
technology.
5. MOBILITY AT HIGH SPEED
LTE UE CLASSES
UE classes are as presented below;
• It should be noted that UE classes are constantly being developed and more
classes are now specified by 3GPP (up to class 10), but the five classes are
physically available in the market.
• Higher classes of LTE UE have improvement on the capability to do 64QAM
on the UL and higher order of MIMO transmission.
WHY LTE?
LTE supports roaming with the 3GGP mobile networks. However,
these services are not easy to achieve some other technology like
WiMAX.
5. ROAMING
WHY LTE?
LTE needs lower power consumption than other
telecommunication multiple access technology. One of the
reasons of this is the use of SC-FDMA modulation in uplink
channels.
6. ENERGY EFFICIENCY
CYBERSPACE LTE
• Cyberspace LTE network run on TDD Technology. TDD is Time
Division Domain. Which means that both downlink and uplink
use the same frequency.
• FDD is Frequency Division Domain which means the downlink
and uplink use different frequency
1. TDD OR FDD
CYBERSPACE LTE
• Cyberspace LTE network covers only Lagos (for now) with 100
eNodeB (eNodeB are base stations).
• The network has the potentials of growing in the nearest
future.
2. COVERAGE
CYBERSPACE LTE
• Cyberspace LTE network run on NCC Licensed band 42 and
frequency 3465 – 3485MHz.
• Our bandwidth is 20MHz. The largest bandwidth for
deployment of LTE. LTE Advance can do more than 20MHz but
the technology is till under-construction.
3. FREQUENCY BAND AND BANDWIDTH
CYBERSPACE LTE
• Cyberspace currently has three types of devices, MiFi, Indoor
terminal and outdoor terminal.
• The modems have two parts inside by design;
• A. the LTE WAN – connects to the LTE network and gets public
IP address.
• B. the WiFi – connects devices together in WLAN and assigns a
local IP via its inbuilt DHCP.
4. TERMINALS (UE)
CYBERSPACE LTE
• The Huawei MiFi (Model E5776s-420) can support 10 connected WiFi Users
• It has in-built battery that can last over 3 hours in active use and more when idle.
• The battery is rechargeable via its USB port on a computer or its adapter.
• It very portable and can be carried about.
• It is class-4 LTE UE device with 2X2 MIMO transmission system.
• Default log-in details;
• User Account :user Password: menauser
• Admin account: admin Password: menatelecom124
4. TERMINALS – MIFI
CYBERSPACE LTE
• The Huawei Indoor CPE (Model B5142 ) can support 30 connected
WiFi Users
• It is currently used for internet deployment for clients.
• It has a better gain than MiFi, but not as much as outdoor. It also has
2 RJ-45 ports for LAN connections.
• It is class-4 LTE UE device with 2X2 MIMO transmission system.
• Default log-in details;
Admin account: admin Password: LTEcpe
4. TERMINALS – INDOOR TERMINAL
CYBERSPACE LTE
• The Huawei Outdoor (Model B2268 H/S) can support 15 connected WiFi Users per SSID. 2 SSID’s can be configured.
• It has two RJ-45 ports for LAN connections.
• It can do L2TP for layer-2 trunking function. It is currently used by enterprise clients. It has more gains and can work at far distances from the eNodeB.
• It is class-4 LTE UE device with 2X2 MIMO transmission system.
• Default log-in details;
Admin account: admin Password: LTEcpe
4. TERMINALS – OUTDOOR TERMINAL