cv_arvind pandey

of 5

CURRICULUM VITAE

Arvind PandeyMobile: [email protected]@gmail.com

OBJECTIVE

To Utilize My Skills and Abilities Towards The Growth of The Organization, So That It Become Fruitful To My Career, Capable of Working With or Without Supervision, Having Good Learning and

Managing Skills.WORK EXPERIENCE

(1) Organization : Sterlite Technology Ltd. (Vedanta Resource) Duration : Mar’ 2012 – Till date Designation : Associate Manager (Quality Control Fiber Rollout Project for NFS)

Key Work Experience: • Currently looking over 324 km route& multiple activities ,ensuring their quality.(Civil &Optical)

• Liasioning with BSNL and PICG for smooth roll out of Project.

• Providing Quality training to Execution team and Vendor at field level so as to ensure quality

from end executor.

• Overall responsibility for HOTO documentation and upload the same in ATOM.

• Project DPR for Online Quality Assurance.

• AT offer from projects to QA for Quality Control.

TECHNICAL RESPONSIBILITIES:-

• Monitoring quality of the Excavated Trench /route for duct laying as per company standards &guidelines

• Checking quality of Duct laying (use of dispensers/ decoilers) as per company guide lines.• Checking quality of HDPE duct prior to laying in trench • Physical check for duct joints (couplers)& also duct integrity test, duct leakages etc. • Physical check for Man hole /hand hole (concrete) in factory plant and after delivery on

ground.• Quality check for installation of concrete chambers as per specification &guidelines.• Quality check for concrete route markers as per quality standards.• Quality check for G.I /DWC Installation for crossings of bridges/road/railway tracks.• Quality check at Bridge crossings, railway tracks ,road crossings etc• Quality check of Different Machines like HDD, Excavators, Pressure Compressors so as to

obtain required power, pressure for assigned task,• Quality check of different Non free issue material like Couplers, End Plugs, Simple Plugs,

warning tape etc.,• Quality check for HDPE Duct buried under earth prior to installation of transmission line

(OFC).

of 5

• Quality check of the documents prepared /As-built made.• Quality check of the wire/ Fiber installation in ducts • Quality check of the joints prepared once OFC is installed/blown.• Quality check of the fiber splicing & routing in Joint Closures.• Checking quality of fiber routing for In building installation.• Checking quality of different tools /machines (OTDR.SPLICING, POWER METER)required in

the step by step process, for proper & smooth working.• Quality check of the fiber Termination in ILA/Regeneration room ,inside FMS,• Checking quality of the Earthling pits.( done after repeated 8km length).• Checking Quality of the Shelter Battery Banks, D.G, power unit, transmission equipment ,

armor continuity.• Checking Quality of the different Alarms installed for monitoring the route .• Checking quality of the Safety &Environmental measures used by working agencies.• Check over labour right Compliances.• Maintaining DPR as per quality norms followed on ground.

Responsibilities and Tasks Undertaken:-

• An enterprising leader with abilities in motivating cross functional teams and delivering quality services to clients.

• Deft in handling all quality related issues, handling customers & Channel Partners .

• Strong relationship management, analytical and communication skills

• Expertise in implementing quality parameters with focus on profitability by ensuring optimal utilization of resources.

• Expertise in managing & maintaining business relationship with clients and customers to achieve quality product & service norms by resolving their quality related critical issues.

• Liasioning works with various Government Departments &Clients

• Monitoring project time lines to ensure successful delivery of project within time with quality.

• Knowledge of different quality parameters of EPC & equipment

• Self-motivated, Team building, ready to travel.

JOB RESPONSIBILITIES :-

I. Incoming Quality :- 1. Supplier Audit / visit for quality issues & improvement.2. Maintain Supplier Rating & Analysis of 5Worst Supplier.3. To carry out PPAP (Production Part Approval Process).4. Part Reliability support & updation at vendor end.5. Coordination with other departments & vendors for new development, alternate source development & vendor up gradation activities.6. Conduct trial of new material along with process team.

II. Process Assurance :-1. Recognized for developing and delivering solutions to the organization utilizing Six Sigma

methodology.

of 5

2. Bringing continuous improvements in overall operations by implementing various cost saving initiative like KAIZENS, 5S activities, QC Tools for problem solving etc.3. Preparation of FMEA, Cause-and-Effect, Process Mapping & Pareto analysis.4. Expert in using 7 QC Tools (Problem Solving Tools) for process Improvements.5. Ensuring the process audit at all manufacturing sections against the technical specifications and to initiate process trouble shooting as and when required & Feedback to the process by performing process analysis, proper timely feedback to operation regarding the product Quality. 6. Application of Quality tools viz. 7QC Tools, 6M, FIFO, WHY-WHY Analysis , PFMEA & Pokayuki etc. for process improvement.7. To carry out PPAP, MSA, CONTROL CHART, & SQC process.8. Analyzing all the process data, identify & prioritize the Key areas to focus for the process improvement, which give maximum output.9. Leading Continuous Improvement Suggestion Program (CISP) for process improvement.10. Preparation and Execution of SOP’s, Preventive maintenance Checklist schedule for all the instruments on the shop floor according to the standards.11. Responsible for Highlighting day to day process violations and quality issues to production for necessary corrections.12. Cp/Cpk study for critical parameter.

13. To motivate the 5S & Kaizen culture in the shop floor .

III. Customer Assurance :-1. Preparation of 8D for internal & external Customer complaints.2. Visit at Customer End for Complaints Analysis and Resolve the same at Customer end.3. Application of Quality tools viz. 7QC Tools, WHY-WHY analysis for Customer Complaints.4. Monitor Customer Satisfaction Index on quarterly basis.5. Customer Quarterly feedback on quality ratings & Ranking6. CAPA effectiveness, Adherence checking and SOP updation for control in operation"7. CAPA closure monitoring with Manufacturing and CAPA validation.8. Root cause identification , and prevention of bad product leaving the organization

(2) Organization : Videocon Industries Ltd. Duration : Feb’2008 – To Mar’2012 Designation : Engineer- Incoming Quality Assurance Dept in refrigeration Unit. Company involved in manufacturing of home appliances.

JOB RESPONSIBILITIES : -• LRR & LRN data collection, analysis & improvement.• Supplier Audit / visit for quality issues & improvement.• Maintain Supplier Rating & Analysis of 5Worst Supplier.• To prepare PATD (Part Assurance Test Design) & PIST (Part Inspection Test Standard) for

parts.• To carry out FPA (First Part Approval) process.• Analysis of part’s FFR (Field Failure Rate) & improvement. • To ensure product quality by carrying out various tests viz. , Salt Spray Test, Hot & Cold Test

etc• Part Reliability support & updation at vendor end.• To maintain ISO procedure & documentation & revise if needed.• Application of Quality tools viz. 7QC Tools, fishbone diagrams, etc. for quality improvement.

of 5

• Full time member of VSD (Vendor Support & Development) Team.• Daily data updation in SAP ERP. • Coordination with other departments & vendors for new development, alternate source

development & vendor up gradation activities.• Checking Specialty of CRCA Material.• Responsible for PPAP Documentation.• Assisting in QMS documentation required for ISO.• Checking quality of new developing parts.• Calibrating instruments and maintaining documents related with it.• Daily Process & Product Audit.• As a Q.A. Inspector in inward, in-process and final inspection areas to check and control

Quality of the products.• To maintain ISO & SOP procedure & documentation & revise if needed.• Monthly data collection & analysis & generate MIS on defects.• Coordination with other departments & Supplier for CAPA (corrective and preventive action).

EDUCATION

Examination Board/University Institute RemarksBE- Mechanical Engineering [2004-2008]

Rajiv Gandhi Technical University (M.P.)

Bansal Institute of Science & Technology, Bhopal

65.2%

HSSC (12 th) [2003]

Board of Secondary Education (M.P.)

Saraswati Higher Sec. School, Rewa

60.0%

HSC (10th) [2001]Board of Secondary Education (M.P.)

Saraswati Higher Sec. School, Rewa

70.2%

INDUSTRIAL TRAINING

I have done 45 days Industrial Training from “BALCO ALUMINA POWER PLANT” Korba, Chhattisgarh.

PROFESIONAL TRAININGS • Six Sigma Black Belt-IACT GLOBAL(offers certification and training services )• Quality and Process Development.• Project Tracking and Reporting.• 7 QC Tools.• Process Mapping, Cause and Effect & FMEA.• Auditing tools & techniques• ISO 9001-2008 and TL-9001 internal audit Certified by DNV.• SOP writing & Documents preparation.• Supervisory Excellence.• 8D analysis.• KaizenCOMPUTER SKILLS

• Oracle• Word Power Point

of 5

• MS Office 2007, Excel• Auto Cad & pro-e.

PERSONAL DETAILS

• Name : Arvind Pandey

• Date of birth : 01 st Feb1986

• Marital Status : Married• Father’s Name & Occupation : B.L. Pandey (Govt. Service)• Mother’s Name & Occupation : Aruna Pandey (Housewife)

• Permanent Address : Village – Post Hanumangarh, Dist- Sidhi (Madhya Pradesh), 486661

• Total Experience : 7 Years

Personal Traits :

• I am a young with sound physique, sincere dynamic, result oriented and also having sound experience.

• I am interest growing with you on the long term basis. • I always take more interest in challenging assignments. • Ability and interest to learn from others and work as a team. • Good Communication Skills.

DECLARATION :-

I hereby declare that information given above is true to the best of my knowledge .

PLACE: Kashmir (J&K) DATE: (ARVIND PANDEY)