cut resistant hand protection - bob dale...
TRANSCRIPT
CUT RESISTANT HAND PROTECTION
CUT RESISTANT HAND PROTECTION
Hi-Viz SafetyHigh visibility TPR impact moulds for added safety
Abrasion ResistantHPPE shell & Nitrile coating provide optimum protection from abrasion
Cut ResistantHigh Performance Polyethylene fiber for excellent cut resistance
Impact ResistantTPR (Thermoplastic rubber) back-hand, thumb and finger moulds
Oil ResistantNitrile coating offers excellent resistance to oils and grease
CUT RESISTANT GLOVES offer the ultimate combination of comfort and long lasting, heavy duty protection. Benefits can include excellent cut, abrasion and chemical resistance, while still offering superb dexterity and flexibility. Ideal for hazardous work environments where sharp tools and materials are handled.
Chemical ResistantNitrile offers protection from contact with hazardous chemicals
Puncture ResistantNitrile coating provides physical resistance to punctures and snags
Powerful GripNitrile coating provides excellent wet, dry and light oil grip
Tear ResistantPowerful tear resistant protection to keep hands safe
Lightweight & BreathableUltra lightweight fabric keeps hands cool for all day wear
DexterityForm fitting design & a soft, flexible coating for lightweight comfort
99-1-9792* 6-11 (XS-X2L)Cut Resistant Impact Gloves
AN
SI
CUT
A8
Check with your BDG® sales representative for availability. (Not all gloves available in the USA)
99-1-9623* 6-11 (XS-X2L)HPPE Cut Resistant Gloves
+ High Performance Polyethylene fiber shell for excellent cut resistance
+ Double dipped nitrile coating+ Elastic wrist for secure fit
and feel+ Sandy Nitrile coating
provides a firm grip
AN
SI
CUT
A3
SAFETY STANDARDS:
99-1-9629* 6-11 (XS-X2L)HPPE Cut Resistant Gloves
+ High Performance Polyethylene fiber shell for excellent cut resistance
+ Elastic wrist for secure fit and feel
+ Sandy Nitrile coating provides a firm grip
AN
SI
CUT
A9
SAFETY STANDARDS:
CUT-X
99-1-9628* 6-11 (XS-X2L)HPPE Cut Resistant Gloves
+ High Performance Polyethylene fiber shell for excellent cut resistance
+ Elastic wrist for secure fit and feel
+ Sandy Nitrile coating provides a firm grip
AN
SI
CUT
A8
* Glove design and rating specifications are subject to final verification and may change.
99-1-9791* 6-11 (XS-X2L)Cut Resistant Impact Gloves
+ High Performance Polyethylene fiber shell for excellent cut resistance
+ TPR guards for impact protection
+ Elastic wrist for secure fit and feel
+ Sandy Nitrile coating provides a firm grip
AN
SI
CUT
A5
SAFETY STANDARDS:
99-1-9627* 6-11 (XS-X2L)HPPE Cut Resistant Gloves
+ High Performance Polyethylene fiber shell for excellent cut resistance
+ Sandy Nitrile coating provides a firm grip
+ Elastic wrist for secure fit and feel
AN
SI
CUT
A7
SAFETY STANDARDS:
99-1-9626* 6-11 (XS-X2L)HPPE Cut Resistant Gloves
+ High Performance Polyethylene fiber shell for excellent cut resistance
+ Elastic wrist for secure fit and feel
+ Sandy Nitrile coating provides a firm grip
AN
SI
CUT
A6
SAFETY STANDARDS:
Check with your BDG® sales representative for availability. (Not all gloves available in the USA)
CUT RESISTANT GLOVES
99-1-9780 7-11 (S-X2L)HPPE Cut Resistant Gloves
+ High Performance Polyethylene fiber shell for excellent cut resistance
+ Polyurethane coated palm for flexibility and breathability
+ Elastic wrist for secure fit and feel
SAFETY STANDARDS:
AN
SI
CUT
A24242B
EN388
99-1-9781 6-11 (XS-X2L)HPPE Cut Resistant Gloves
+ High Performance Polyethylene fiber shell for excellent cut resistance
+ Microfoam polyurethane coated palm for flexibility and breathability
+ Elastic wrist for secure fit and feel
SAFETY STANDARDS:
AN
SI
CUT
A3
AN
SI
CUT
A3
4442C
EN388
99-1-9790 6-11 (XS-X2L)Cut Resistant Impact Gloves
+ High Performance Polyethylene fiber shell for excellent cut resistance
+ Nitrile foam coating provides a strong grip and resists oils and grease
+ TPR guards for impact protection
SAFETY STANDARDS:
4X43C
EN388
99-1-9770 7-11 (S-X2L)HPPE 18 Gauge Cut Resistant Gloves
+ High Performance Polyethylene fiber shell for excellent cut resistance
+ Polyurethane coating for a firm grip
+ Elastic wrist for secure fit and feel
SAFETY STANDARDS:
AN
SI
CUT
A44X43D
EN388
99-1-9772 7-11 (S-X2L)HPPE 18 Gauge Cut Resistant Gloves
+ High Performance Polyethylene fiber shell for excellent cut resistance
+ Nitrile foam coating for a firm grip
+ Elastic wrist for secure fit and feel
SAFETY STANDARDS:
AN
SI
CUT
A44X44D
EN388
99-1-9774 7-11 (S-X2L)Kevlar® 18 Gauge Cut Resistant Gloves
+ Kevlar® shell for excellent cut resistance and comfort
+ Nitrile foam coating for a firm grip
+ Elastic wrist for secure fit and feel
SAFETY STANDARDS:
AN
SI
CUT
A43X42D
EN388
99-1-9776 7-11 (S-X2L)Kevlar® 13 Gauge Cut Resistant Gloves
+ Kevlar® shell for excellent cut resistance and comfort
+ Nitrile foam coating for a firm grip
+ Elastic wrist for secure fit and feel
SAFETY STANDARDS:
AN
SI
CUT
A44X43D
EN388
99-1-9778 7-11 (S-X2L)HPPE 13 Gauge Cut Resistant Gloves
+ Cut resistant HPPE shell
+ Nitrile foam coating (touchscreen device compatible)
+ Elastic wrist for secure fit and feel
SAFETY STANDARDS:
AN
SI
CUT
A44X44D
EN388
Check with your BDG® sales representative for availability. (Not all gloves available in the USA)
CUT RESISTANT GLOVES
99-1-9729 7-11 (S-X2L)Cut Resistant w/Flexible Coating
+ Fiberglass, lycra and nylon cut resistant liner
+ Flexible HPTTM coating
+ Treated with Actifresh® to eliminate bacteria
SAFETY STANDARDS:
AN
SI
CUT
A23341C
EN388
99-9-9731 7-11 (S-X2L)Winter Cut Resistant w/Flexible Coating
+ Terry liner for added warmth
+ Fiberglass, lycra and nylon cut resistant liner
+ Flexible HPTTM coating
SAFETY STANDARDS:
AN
SI
CUT
A44443C
EN388
60-1-1280KV S-X2L (9-13)Utility Leather Glove
+ Premium cowhide grain leather
+ Cut resistant Kevlar® liner
+ 6.5” split leather Gauntlet cuff with reflective strips
+ Fully welted seams
SAFETY STANDARDS:
AN
SI
CUT
A4
AN
SI
PUNCT.
5CUT3
EN388
AN
SI
CUT
A3
10-1-8013 8-12 (XS-XL)Cut Resistant Liner with Dyneema®
+ Seamless Dyneema®, stainless steel, spandex glove liner
+ Elastic wrist for secure fit and feel
+ 13 gauge knit
+ CFIA approved for food contact
SAFETY STANDARDS:
AN
SI
CUT
A5
AN
SI
CUT
A3
50-9-1280KV S-X2L (9-13)Lined Utility Grain Leather Mitt
+ Premium cowhide grain leather
+ Cut resistant Kevlar® liner
+ Thinsulate™ lined (C-100) for added warmth
+ 6.5” split leather Gauntlet cuff with reflective strips
SAFETY STANDARDS:
AN
SI
PUNCT.
5
20-1-1600 S-X2L (9-13)Goatskin Driver w/Kevlar® Liner
+ Premium grain goatskin for a soft, comfortable fit
+ Cut resistant palm w/Kevlar® lining for cut/abrasion resistance
+ Kevlar® stitching
+ Double shirred elastic wrist
SAFETY STANDARDS:
AN
SI
PUNCT.
3A
NS
ICUT
4CUT5
EN388
20-1-11930 S-X2L (9-13)Performance Cut/Impact
+ TPR guards for impact protection
+ Cut resistant palm lined for cut/abrasion resistance
+ Double stitched synthetic leather palm
+ PVC dot pattern for added grip
SAFETY STANDARDS:
AN
SI
CUT
A53544
EN388
99-1-9700 7-10 (S-XL)Kevlar® Seamless Knit
+ Kevlar® shell for excellent cut resistance and comfort
+ Crinkle latex coating offers superb grip and natural puncture resistance
+ Elastic wrist for secure fit and feel
SAFETY STANDARDS:
AN
SI
CUT
A23244X
EN388
Check with your BDG® sales representative for availability. (Not all gloves available in the USA)
2 DIFFERENT TESTS 1 COMMON TEST MACHINE
VERTICAL FORCE
BLADE MOVEMENTTDM-100 TESTTOMODYNAMOMETER
BLADE
TEST MATERIAL
CONDUCTIVE STRIP
WHAT THE STANDARDS MEAN FOR YOU?Hand safety not only relies on selecting the right glove - but selecting the right glove for the task at hand.
From lightweight product handling to heavy duty hazardous work, BDG® cut resistant gloves offer the diversity
and protection for any work environment.
BDG®’S COMMITMENT TO SAFETYData acquired from these tests ensures proper selection
of the right glove with the right protection for any task
at hand. BDG® hand protection products that have
been tested will be marked to easily identify
required safety standards.
Testing standards for cut resistant gloves have changed for ANSI and EN 388. Both now use the same measuring device, the TDM-100 machine, resulting in more comparable data between the standards. The TDM tests the amount of weight (grams/newtons) necessary for a blade to cut through material. This test method provides greater accuracy than the previous EN 388 Coup test, and has the ability to test higher cut materials and provide a larger range of precision results.
OLD ANSI CCPT CUT TEST METHODLEVEL 1 2 3 4 5
WEIGHT* ≥ 200 ≥ 500 ≥ 1000 ≥ 1500 ≥ 3500
* Weight (grams) needed to cut through material with 25 mm blade travel
OLD EN 388 CCPT COUP TEST METHODLEVEL 1 2 3 4 5
INDEX* ≥ 1.2 ≥ 2.5 ≥ 5.0 ≥ 10.0 ≥ 20.0
* Force applied is constant at 5 Newtons
GENERAL PURPOSEMATERIAL HANDLING
ASSEMBLY, AUTO
GENERAL PURPOSELIGHT MATERIAL HANDLING
SHIPPING/RECEIVING
CONSTRUCTIONMETAL/GLASS HANDLINGMANUFACTURING, AUTO
METAL/GLASS HANDLINGMACHINING, HVAC
MANUFACTURING, FABRICATION
METAL/GLASS HANDLINGAUTOMOTIVE ASSEMBLY
METAL FABRICATION
METAL/GLASS HANDLINGFOOD PROCESSING
HEAVY DUTY CONSTRUCTION
* Applications are suggestions only. Proper safety/hazard assessments should be done prior to the use of
any hand protection.
The above information is for educational purposes only. For the most accurate and up-to-date information please consult your respective governing bodies (ANSI/ISEA 105-2016 and/or EN 388 2016).
APPLICATIONS*
ASTM F2992: TDM CUT TEST
ANSIISO 13997: TDM CUT TEST
EN 388
GRAMS ≥ 200A1
LIGHT
2 NEWTONSA
LIGHT
GRAMS ≥ 500A2
LIGHT - MEDIUM
5 NEWTONSB
LIGHT - MEDIUM
GRAMS ≥ 1000A3
MEDIUM
10 NEWTONSC
MEDIUM
GRAMS ≥ 1500A4
MEDIUM - HEAVY
15 NEWTONSD
MEDIUM - HEAVY
GRAMS ≥ 2200A5
HEAVY
22 NEWTONSE
HEAVY
GRAMS ≥ 3000A6
EXTRA HEAVY
30 NEWTONSF
EXTRA HEAVY
GRAMS ≥ 4000A7
EXTRA HEAVY
GRAMS ≥ 5000A8
EXTREME
GRAMS ≥ 6000A9
EXTREME
EN 388
4 X 4 4 D PAbrasion Resistance 0-4 RatingCut (Coup Test) 0-5 RatingTear Resistance 0-4 RatingPuncture Resistance 0-4 RatingCut (TDM Cut Test) A-F RatingImpact Protection P (P, F, or X)
TDM CUT TEST METHOD:Weight (Newtons/Grams) needed to cut through material with 20 mm blade travel.
1 Newton = 102 Grams (approx.)
201-499 2-4.9
5-9.9
10-14.9
15-21.9
22-29.9
30+
500-999
1000-1499
1500-2199
2200-2999
3000-3999
4000-4999
5000-5999
6000+
Results are represented by levels A1 to A9 (Lowest to highest level of cut resistance)
* Previously represented as levels 1 to 5, ISEA 105-2011
Results are represented by levels A to F (Lowest to highest level of cut resistance)
* Previously represented as levels 1 to 5, Coup Test
Bob Dale Gloves Canada4504 - 82 Ave. Edmonton, AB T6B 2S4Ph/Tel: (780) 469-2100 | 1-800-661-7303
Bob Dale Gloves USA1171 N. Fiesta Blvd. Gilbert, AZ 85233Toll Free: 1-855-215-7113
Disclaimer - All data, images, drawings, descriptions and other information furnished by Bob Dale Gloves and Imports Ltd., including verbal information, in or on its website, catalogues, brochures, CDs, pamphlets, price lists, documents or any other promotional media are intended to be as accurate as possible but are given for general information only and are not binding on Bob Dale Gloves and Imports Ltd., its employees, agents or other representatives in respect of a particular order. All information, unless stated otherwise, is subject to reasonable variations. Bob Dale Gloves and Imports Ltd. does not accept responsibility for errors or information which is found to be misleading. Before using products supplied or manufactured by Bob Dale Gloves and Imports Ltd., the customer should satisfy itself of their suitability for any required purpose.