customization using variable instruction sets
DESCRIPTION
Customization Using Variable Instruction Sets . Krishna V Palem CTO Proceler Inc. Designing Instruction Sets. Choice of instructions is determined by several trade-offs Implementation in a fixed silicon area Ability of the compiler to exploit its presence - PowerPoint PPT PresentationTRANSCRIPT
UCB November 8, 2001
Krishna V Palem
Proceler Inc.
Customization Using Variable Customization Using Variable Instruction Sets Instruction Sets
Krishna V PalemCTO
Proceler Inc.
2
UCB – November 8, 2001
Krishna V Palem
Proceler Inc.
Designing Instruction Sets
Choice of instructions is determined by several trade-offs– Implementation in a fixed silicon area– Ability of the compiler to exploit its presence– Trade-off between impact on cycle time vs. frequency
Implementation cost is amortized across many applications– Infeasible to tailor support for a small number of low
volume applications Reconfigurable logic enables a new degree of
freedom
3
UCB – November 8, 2001
Krishna V Palem
Proceler Inc.
Dynamically Variable Instruction Set Architecture (DVAITA)
C P
Microprocessorcore
Reconfigurable Logic
Soft Micro-architecture
Components
Compiler
Fixed ISA
• Software engineer• C programming• Algorithm Design
DVAITA ISA
Applicationspecific
Soft Processor
Fundamentally alters the hardware/software interface Synthesis
Map
Place
Off-line Construction
4
UCB – November 8, 2001
Krishna V Palem
Proceler Inc.
DVAITA
DVAITA is a “soft” ISA– Pre-synthesized, pre-placed instruction implementations
DVAITA compiler– Analysis, program transformation, and scheduling
algorithms – Compilation to a domain specific ISA– Create a customized micro-architecture at compile time
DVAITA Hardware Support Package– Analogy with Board Support Packages (BSP)– Run-time for host-FPGAcommunication– Abstraction for linking the supporting hardware/software
interfaces
5
UCB – November 8, 2001
Krishna V Palem
Proceler Inc.
DVAITA Enabled Customization
Customization at the domain level– Soft ISAs for DSP, Telecommunications, Industrial
automation and control, etc. Customization at the program level
– Tailored micro-architecture produced at compile time Customization at the operation level
– Tailored arithmetic and logic operations, for example, power vs. speed
6
UCB – November 8, 2001
Krishna V Palem
Proceler Inc.
Compiling Code Segments to Hardware
L1: for (…){L2: for (…) {
.. } ..
}……
L3: for (…){L4: for (…) { L5: for (…) {
…}..
} ..
}
• Datapath• Control • Memory• I/O Interfaces
DVAITA ISA
DVAITA ISA
• Datapath• Control • Memory• I/O Interfaces
7
UCB – November 8, 2001
Krishna V Palem
Proceler Inc.
Compile-time generation of Application-specific soft processors
ISAs can be selected on a
domain specific basis
8
UCB – November 8, 2001
Krishna V Palem
Proceler Inc.
Application-Specific Soft Processors
C P
Compiler
•C Programming•Algorithm Design
Software Engineer
Microprocessorcore
Reconfigurable Logic
ReconfigurableComputing System
(RCS)
Application-specific soft processors
Communication
Security
Networking
Soft Micro-architectureComponents
9
UCB – November 8, 2001
Krishna V Palem
Proceler Inc.
Commercial Hardware Platforms
High-end System-on-a-Chip solutions– Xilinx Virtex 2 with embedded PPC 405– Altera Excalibur with embedded ARM
Low-end System-on-a-Chip solutions– Triscend Configurable System on a Chip (CSoC) with
embedded ARM– Atmel Field Programmable System Level Integrated
Circuits (FPSLIC) with embedded 8-bit custom RISC processor
Board-level products– Mix embedded processors and commercial FPGA
solutions
10
UCB – November 8, 2001
Krishna V Palem
Proceler Inc.
More Generally Architecture Assembly
An ISA view
Synthesis and other hardware design off-line
Much closer to compiler optimizations implies faster compile time
Applications
Program
“Compiler” selects assembles and optimizes program
Dynamically variable ISA Architecture implementation
Prebuilt Implementations
Build off-line (synthesis, place
and route)
Data path Storage Interconnect
Also applicable to yield fixed implementations in silicon
11
UCB – November 8, 2001
Krishna V Palem
Proceler Inc.
Placing in Perspective
12
UCB – November 8, 2001
Krishna V Palem
Proceler Inc.
The Space for these Technologies
ASIC
CMP NP
COTSPROCESSOR
PICO
Software programmable
Designed with EDA Tools
Custom Microprocessor
CMP:
Network processor
NP:
Speed to market
Perf
orm
ance