custom product builder...custom product builder proudly “made in the u.s.a.” (800) 884-9388...
TRANSCRIPT
Custom Product Builder
Proudly “Made in the U.S.A.”
(800) [email protected]@stratatac.comwww.stratatac.com
3980 Swenson AveSaint Charles, IL 60174
Contact Us Today! Location
We build quality into every step of our process.
We truly understand the importance of getting the job done right the first time. Your order is checked multiple times by order entry, coating, slitting, shipping and invoicing departments.
Our employees take great pride in their work. We are proud to say Made in the U.S.A.
Our products are guaranteed 100%.
Our Quality
3-2020
Adhesive SelectorAdhesive Number
Emulsion Type
Service Temp Range
Min Application Temp Description
Perm
anen
t
601 Water Based Acrylic -25F to +135F +35F
A general purpose acrylic adhesive with good initial tack, high shear and ultimate adhesion. 601 approved for indirect food and is also a repulpable adhesive.
610 Water Based Acrylic -40F to +250F +35F
Outdoor, marine grade permanent adhesive. High performance for tight mandrels and is BS5609 certified. Skin safe, indirect food approved and very durable.
616 Water Based Acrylic -65F to +250F +25F
High Shear Solvent Replacement Water Based Acrylic Perm. High solids means a higher coat weight. Excellent for low energy surfaces.
617 Water Based Acrylic -65F to +250F -20F
All Temp adhesive with good high speed convertability, excellent low temperature performance and rapid wet out.
619 Water Based Acrylic -65F to +250F -20F High Shear adhesive for Indoor/Outdoor use. Rated for
BS5609 Drum Label.
Rem
ovab
le 614 Water Based Acrylic -65F to +250F -10F
Mid-tack all temp removable. FDA approved for Direct Food Contact, it is blood bag compliant and skin safe. It also performs excellent as a shelf marking adhesive.
611 Water Based Acrylic -65F to +150F +40F Mid-tack removable adhesive. Excellent for shelf labels
or other applications when clean removability is a must.
Ult
ra-
604 Water Based Acrylic -50F to +125F -10F
Ultra removable “cling” adhesive with excellent remov-ability from glass. Use for window decals, oil change, or as a vinyl cling substitute and is approved for indirect food labeling.
Liner SelectorCaliper / Weight
Surface Finish
Printable (Y/N) Description
Pap
er
25# SCK N 25# sck for roll labels and hot melt coating and is laser printable
40# SCK N 40# sck for roll labels
50# SCK N 50# sck for high speed die cutting
1.7 Glassine N 1.7mil glassine with ultra easy release
2.1 Clay Coated Y 2.1 mil clay coated for laser liners
2.5 Clay Coated Y 2.5 mil clay coated for laser, fanfold, or sheets
3.4 Clay Coated Y 3.4 mil clay coated for laser, fanfold, or sheets
4.6 Clay Coated Y 4.6 mil clay coated for laser, fanfold, or sheets
Film
1.2 Clear PET N Excellent strength for high speed application
1.5 Clear PET N Excellent strength for high speed application
3.0 Clear PET N Excellent strength for high speed application
Lay
Flat
3.4 Clay Coated Y 50# clay coated Lay-Flat
4.6 Clay Coated Y 69# clay coated Lay-Flat
6.8 PK N 92# PK Lay-Flat
8.0 Tag Y 8.0 Mil Tag Lay-Flat
Your Custom Product ConstructionProduct #1 Product #2
Top Coat
Face Stock
Adhesive
Liner/Mid
Adhesive
Liner
Other Requirements Application
Size of Label
Qty of Labels
Slit Roll Width
Roll Length
Total Footage
How to use the Strata-Tac Custom Product Builder Below is the Strata-Tac Printable Top Coat Guide. If your label will require
a top coat for printing select one from the guide below.
Next, select the Film needed for your labels face stock and/or mid-ply from the Film Selector on the next page.
Finally, turn to the back page and select your Adhesive and Liner.
Using the tables in this brochure, complete the chart below with the Top Coat, Film, Adhesive and Liner needed for your label construction. The tables include our standard products. If you do not see what you need, contact Strata-Tac Customer Service or your sales representative for assistance.
Then, contact us for a quote. You can call our Customer Service team at 630-879-9388, email us at [email protected], or contact your Strata-Tac sales representative.
Complete the “Other Requirements” section with any information you have available.
Printable Top Coat GuideStrata-Tac Top Coat
Code
Large Production Laser Printers
LED Laser
Home or Office Desk Top Laser
Off-Set and Flexo Printing Specialty Indigo/ Liquid
Toner Engines
Aqueous Inkjet *Wide Format
available
UV Inkjet
Thermal Transfer
Direct Ther-mal
ExamplesKonica Minolta,
Ricoh, Xerox, Can-non, Nexpress
Okidata, Xeikon
HP Lexmark
IGEN Indigo MemJet Mark Andy, Domino, Xe-ikon, Durst
Zebra, Sato Zebra, Sato
X (MT) Matte Digital ✓ ✓ ✓ ✓ Simplex ✓ ✓
SC Super Clear Gloss Digital
✓ ✓ ✓ Simplex ✓ ✓ ✓
DL Satin Digital ✓ ✓ ✓ ✓
GL Gloss Digital ✓ ✓ ✓ ✓
LI Laser Indigo ✓ ✓ ✓ ✓ Simplex ✓ ✓
I Gloss Indigo ✓ ✓
IM Double Matte ✓ ✓ ✓ Duplex ✓ ✓ ✓
IG Inkjet Gloss ✓ ✓ ✓
MV Soft Touch ✓ ✓ ✓
P Gloss Primer ✓ ✓ ✓
DT Direct Thermal ✓
**All testing is from Strata-Tac data and not necessarily from the printer manufacturer. This is intended to be a guide only and all applications should be tested by the customer. 3-2020
Film SelectorCaliper (mils) Color Surface
Finish Treated Features
BOPP
2.0 White Matte 2 side Cavitated white BOPP for low cost film applications
2.3 White Gloss 1 side Gloss top coated for flexo and thermal transfer printing
3.0 White Matte 1 side Ideal for lamination into PS label structures for great stiffness for dispensability
4.0 White Matte 2 sides Ideal for wrist bands or durable label products
6.0 White Matte 2 sides Ideal for wrist bands or durable label products
8.0 White Matte 2 sides Print two sides Ideal for menus and other two sided applications
0.75 Clear 1 side Ideal for the production of IRC labels
2.0 Clear 1 side Ideal for window decals or for use as an overlaminate
Poly
este
r
2.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock
3.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock
4.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock
5.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock
6.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock
7.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock
10.0 White Gloss 2 sides Ideal for use as a wristband or a durable label stock
0.5 Clear Untreated Ideal for use as an overlaminate or as a durable label stock
1.0 Clear 2 sides Ideal for use as an overlaminate or as a durable label stock
1.5 Clear Untreated Ideal for use as an overlaminate or as a durable label stock
2.0 Clear 2 sides Ideal for use as an overlaminate or as a durable label stock
3.0 Clear Untreated Ideal for use as an overlaminate or as a durable label stock
4.0 Clear Untreated Ideal for use as an overlaminate or as a durable label stock
5.0 Clear 2 sides Ideal for use as an overlaminate or as a durable label stock
7.0 Clear 2 sides Ideal for use as an overlaminate or as a durable label stock
10.0 Clear 2 sides Ideal for use as an overlaminate or as a durable label stock
Viny
l
3.2 White Matte 1 side Ideal for use when a durable label is needed such as shelf marking and other signage
7.0 White Matte 2 sides Laser and HP Indigo printable film is ideal as a Teslin replacement and printable on both sides
3.0 Clear Gloss 1 side Ideal for use when a durable label is needed, applications include shelf marking and other signage
Synt
hetic 7.0 White Matte 2 sides Ideal for use when a tear resistant, water proof, opaque pirntable film is needed
4.0 to 7.0 White Matte 2 sides UV, high scuff and weather resistants is ideall for outdoor applicationsl like banners, signs & labels
Spec
ialty 2.0 Metalized Rainbow 1 side Metalized PET with a rainbow finish
53# White Matte 2 sides 53# Smudge Latex impregnated stock with excellent smudge resistance