CURVED SIDE-MOUNT LICENSE PLATE HOLDERS•License plate frame is grooved with a chrome finish

•Feature flush-mount flat head screws and built-in LED license plate light

•Plate with taillight has a red LED taillight assembly that can be mounted above or below the plate

•All styles require Küryakyn mounts for side-mount license plate assembly for installation

•Accept most 4” x 7” license plates

FUELPAK•LCD version Fuelpak features finer mapping resolution for greater tuning precision along with improved software to minimize decceleration popping•Throttle position sensor-based system simplifies the process of fuel-injection tuning•Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button•Increases power and improves throttle response•Very user friendly; plugs into the existing harness on the bike•No computer or software is required; simply punch in the values supplied with the Fuelpak•Values supplied are for use with Vance & Hines exhaust systems•Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information)

•Includes all necessary mounting hardware

NOTE: Requires the use of a high-performance air filter.

APRIL 2012

t r

PART # DESCRIPTION SUG.RETAIL1020-1694 For 12 Softail, Dyna models (except 12 CVO Softail Convertible) $279.95

PART # DESCRIPTION SUG. RETAILLICENSE PLATE HOLDERS2010-0895 Vertical mount side-mount license plate holder w/ taillight $159.952030-0621 Vertical mount side-mount license plate holder w/o taillight 119.95MOUNTS2030-0588 For 86-12 FXST/FLST (except 09 FXSTSSE, 08-11 FXCW/C) w/o Küryakyn swingarm covers 28.952030-0589 For 86-12 FXST/FLST (except 09 FXSTSSE, 08-11 FXCW/C) w/ Küryakyn swingarm covers 28.952030-0593 For 08-11 FXCW/C 47.952030-0590 For 91-05 FXD/FXDWG 28.952030-0592 For 06-12 FXD 38.952030-0591 For 86-12 XL 28.95

PART # DESCRIPTION SUG. RETAIL7” HEADLIGHT TRIM RING2040-1045 For 94-12 FLSTC, FLSTF, FLSTFB, FLSTN $99.952040-1044 For 83-12 FLHT, 06-12 FLHX, 94-12 FLHR,

09-12 FLHXXX/FLHTCUTG 99.95

PART # DESCRIPTION SUG. RETAIL41/2” SPOTLIGHTS/PASSING LAMP TRIM RINGS2040-1046 For 62-12 H-D passing lamps $159.99

LED HALO HEADLIGHT AND PASSING LIGHT TRIM RINGS•Chrome grooved trim ring features white single-function LED lights

•Easy installation and incredible style•Low-draw LEDs are eye-catching day or night

•Headlight trim rings sold each, passing lamp trim rings sold in pairs

2040-1045

ION SUG RETAIL

2040-1044

2040-1046

2010-0895 2030-0621

2030-0593

SUG RETAIL

2030-0592

2

DRAG SPECIALTIESHere at Drag Specialties we continue to add new parts and accessories to our already wide range of trusted products. From the latest in custom pieces for more show, to the high-performance parts for more go, all the way to the “staples” that keep your riders rolling every day, you know that you can trust the Drag Specialties brand for quality and value.

PART #SUG.

RETAILDS-325000 $24.95DS-325006 24.95DS-325007 24.95DS-325008 24.95DS-325009 24.951720-0197 19.951720-0198 19.951720-0201 14.95

PART #SUG.

RETAIL1720-0202 $20.951720-0203 33.951720-0204 23.951720-0205 14.951720-0206 26.951720-0207 30.951720-0208 19.951720-0209 19.95

PART #SUG.

RETAIL1720-0210 $25.951720-0211 27.951720-0212 27.951720-0213 22.951720-0214 25.951720-0215 19.951720-0216 19.951720-0217 35.95

PART #SUG.

RETAIL1720-0218 $35.951720-0219 75.951721-0882 24.951721-0883 24.951721-0884 26.951721-0885 24.951721-0931 24.951721-0932 24.95

PART #SUG.

RETAIL1721-1227 $24.951721-1301 74.951721-1344 24.951721-1345 24.951721-1346 24.951721-1347 24.951721-1348 24.951721-1349 24.95

PART #SUG.

RETAIL1721-1350 $24.951721-1351 24.951721-1352 24.951721-1353 29.951721-1354 30.951721-1355 35.951721-1356 29.951721-1357 40.95

PART #SUG.

RETAIL1721-1358 $42.951721-1359 35.951721-1360 33.951721-1361 44.951721-1362 37.951721-1363 34.951721-1364 34.951721-1365 31.95

PART #SUG.

RETAIL1721-1366 $33.951721-1367 43.951721-1368 33.951721-1369 36.951721-1434 33.951721-1435 66.95

DESCRIPTION SINTERED METAL # SEMI-METALLIC # ORGANIC KEVLAR® #GMA CUSTOM CALIPERSA caliper - 1721-1344 1720-0198B caliper 1721-1353 1721-1345 1720-0201F caliper 1721-1356 1721-1350 1720-0205J-BRAKE CUSTOM CALIPERS2-piston (small) 1721-1356 1721-1350 1720-02052-piston (large) 1721-1353 1721-1345 1720-02014-piston 1721-1367 1721-1346 1720-02156-piston (except J-SIX) 1721-1361 1721-1347 1720-0210PERFORMANCE MACHINE162 X 2 (0056-1600) - 1721-1348 1720-0197125 X 4R (0052-1602) 1721-13601 1721-13491 1720-02091

DESCRIPTION SINTERED METAL # SEMI-METALLIC # ORGANIC KEVLAR® #PERFORMANCE MACHINE (CONT)137 X 4B (0052-1602) 1721-13601 1721-13491 1720-02091

125 X 4RSPH (0052-1602) 1721-13601 1721-13491 1720-02091

137 X 4 (0053-2901/2902) 1721-13592 1721-13512 1720-02082

125 X 4 (0052-1601) 1721-1356 1721-1350 1720-0205125 X 4S (0052-1601) 1721-1356 1721-1350 1720-0205125 X 4SL (0052-1601) 1721-1356 1721-1350 1720-0205137 X 4R (0053-2901/2902) 1721-13592 1721-13512 1720-02082

125 X 4HR (0053-2901/2902) 1721-13592 1721-13512 1720-02082

DESCRIPTION OEM #SINTERED METAL #

SEMI-METALLIC #

ORGANIC KEVLAR® #

FRONT BRAKE PADS FOR HARLEY-DAVIDSON (SOLD IN PAIRS)For 08-12 FLHT/FLHR/FLHX/ FLTR/H-D FL Trike 41854-08 1721-1366 1721-0883 1720-0214For 08-12 FXD, FXDC, FXDB, FXDL, FXDF, FXDWG, FXS, FXSTB, FXSTC, FLSTF, FLSTN, FXCW, FXCWC, FLSTFB 44082-08/46363-11 1721-14341 1721-09311 1720-02171

For all 00-07 Big Twin (except FXSTS/I and FLSTSC/I) 44082-00C/D 1721-1365 1721-0882 1720-0213For 05-07 FLSTSC/I, 97-03 FLSTS, 88-06 FXSTS/I, 08-11 FLSTSB 44063-83A/C 1721-1355 DS-325007 1720-0204For 84-99 FLT/FLHT/FLHS/ FLHR/FLTR 44063-83A/C 1721-1355 DS-325007 1720-0204For 91-99 Dyna Glide 44063-83C 1721-1355 DS-325007 1720-0204For 84-94 FXR/FXRS/FXRT 44063-83A/83C 1721-1355 DS-325007 1720-0204For 84-99 FXST/FLST/FXWG 44063-83A/83C 1721-1355 DS-325007 1720-0204For 84-85 FXE/FXEF 44063-83C 1721-1355 DS-325007 1720-0204For 04-12 XL 42831-04/04A 1721-1363 1721-0884 1720-0211For 00-03 XL 44082-00 1721-1365 1721-0882 1720-0213For 86-99 XL 44063-83A/C 1721-1355 DS-325007 1720-0204For 06-12 V-Rod 42897-06A/08 1721-1366 1721-0883 1720-0214For 02-05 V-Rod 44082-00C/D 1721-1365 1721-0882 1720-0213BUELLFor all 03-09 XB9/XB12 (6-piston) H0300-2AB8 1721-1362 1721-1352 -1 OEM insulator shims not required on 11-12 Softails.

BRAKE PADS•Sintered metal brake pads are the OEM-type replacement pads for most bikes from the late 1970s to the present

•Sintered metal brake pads are proudly made in the U.S.A.; second-to-none in their stopping abilities and wear characteristics while still providing excellent reduction in noise and dust

•Organic Kevlar® pads are OEM type replacement brake pads for 1970s and earlier models•Organic Kevlar® pads are the perfect choice for polished or chromed rotors and Billet Steel Rotors•Semi–metallic brake pads offer a pad in between both the sintered and organic brake pads•All three compounds of Drag Specialties brake pads are asbestos, nickel, and lead free

NOTE: If you are using aftermarket billet steel rotors it is recommended you use our Organic-Kevlar® brake pads to avoid damage to them. Sintered pads are not recommended for billet steel rotors as the pad material is too aggressive for those rotors.

NOTE: Pads noted are the same style, the difference being the thickness of the pads.

DESCRIPTION OEM #SINTERED METAL #

SEMI-METALLIC #

ORGANIC KEVLAR® #

REAR BRAKE PADS FOR HARLEY-DAVIDSON (SOLD IN PAIRS)For 08-12 FXD, FXDC, FXDB, FXDL, FXDWG, FXS, FXSTB, FXSTC, FLSTF, FLSTN, FLSTC, FXCW, FXCWC, FLSTFB, FLSTSB 42298-08 1721-1369 1721-0932 1720-0218For 09-12 FLHTCUTG, 10-11 FLHXXX Tri-Glide 83911-09/A 1721-14351 1721-13011 1720-02191

For 08-12 FLHT/FLHR/FLHX/ FLTR (except H-D FL Trike) 42850-06B 1721-1366 1721-0883 1720-0214For all 00-07 Big Twin models (except 06-07 FXST, 07 FLSTF)44082-00/C 1721-1365 1721-0882 1720-0213For 86-99 FLT/FLHT/ FLHS/FLHR/FLTR 42957-86A, 43957-86B/E 1721-1358 DS-325008 1720-0207For 84-85 FLT/FLHT 43957-80 - DS-325000 1720-0203For 91-99 Dyna Glide 44213-87, 44209-87C 1721-1357 DS-325009 1720-0206For L87-94 FXR/FXRS/FXRT 44213-87C, 44209-87 1721-1357 DS-325009 1720-0206For 86-E87 FXR/FXRS/FXRT 44209-82 1721-1354 DS-325006 1720-0202For 06-07 FXSTB/C, 07 FLSTF 46721-06 1721-1368 1721-1227 1720-0216For L87-99 FXST/FLST 44213-87, 44209-87 1721-1357 DS-325009 1720-0206For 84-E87 FXST/FLST 44209-82 1721-1354 DS-325006 1720-0202For 85-86 FXWG 44209-82 1721-1354 DS-325006 1720-0202For 85 FXE/FXEF 44209-82 1721-1354 DS-325006 1720-0202For 04-12 XL 42836-04/42029-07 1721-1364 1721-0885 1720-0212For 00-03 XL 44082-00 1721-1365 1721-0882 1720-0213For L87-99 XL 44213-87, 44209-87 1721-1357 DS-325009 1720-0206For 86-E87 XL 44209-82 1721-1354 DS-325006 1720-0202For 06-12 V-Rod 42850-06B 1721-1366 1721-0883 1720-0214For 02-05 V-Rod 44082-00C 1721-1365 1721-0882 1720-0213

1 Kit includes two sets of brake pads, replacement clips and bolts.

1 Pads are 8mm thick. 2 Pads are 10.5mm thick.

Sintered Metal Semi-Metallic Organic Kevlar®

3

PART # DESCRIPTION SUG. RETAIL0640-0630 W/ 53/4” Slayer stem $109.950640-0631 W/ 31/2” and 41/2” Radius stem 109.95

SMOOTH DIAMOND HEAD MIRRORS•Chrome-plated die-cast aluminum construction•Mirror head measures 5” W x 21/2” H•Chrome hardware included•Sold in pairs

PART # DESCRIPTION SUG. RETAILFOR 84-89 SOFTAIL0710-0144 Skull $45.950710-0145 Flamed 45.950710-0146 Peaked 45.95

CUSTOM OIL DIPSTICKS•New stylish replacement for your OEM dipstick•Three cool styles available•Includes the dipstick•Chrome plated with skull, flame or clean “peaked” design caps

PART # DESCRIPTION SUG. RETAIL2104-0247 Universal black; Twin Cam w/ 180° and

90° boots; black $23.95

8.8MM SPARK PLUG WIRE SET•Constructed with silicone throughout the jacket, insulation and core to deliver high-temperature resistance

•Rated at SAE Class E J2031 with a continuous operating temperature of 450°F

•Measure 38” L without boot (40” with boot)

•Made in the U.S.A.

12V IGNITION COIL•Increases peak spark voltage by 20% or more

•Improves starting, stops high-speed misfires, increases mileage and overall performance

•Performance, quality and value•Available with black body

PART # DESCRIPTION SUG. RETAILFOR 84-95 FLT/FLHT MODELSDS-719932 Light w/ red lens; repl. OEM #59658-79 $16.95

REAR FENDER TIP LIGHT•Fit on OEM and aftermarket rear fenders

•Replacement lenses available separately; see the 2012 FatBook

•Sold each

SUUG RETAIL

PART # DESCRIPTION SUG. RETAIL0950-0410 For 00-12 Softail Twin Cam B motors;

repl. OEM #14761-00 $16.95

BALANCER CHAIN TENSIONER GUIDE KIT•3-piece kit consists of lower, front and rear chain guides•Meets all OEM specifications

PART # DESCRIPTIONSUG.

RETAIL0703-0431 Gas cap w/ vent for 73-82 H-D; repl. OEM #61102-73 $10.950703-0432 Gas cap w/o vent for 73-82 H-D; repl. OEM #61103-73 10.95

BLACK ORIGINAL-STYLE GAS CAPS•Replacement gas caps for OEM and custom tanks, available with or without a vent

•Stamped steel construction with a black finish•Not for use in tanks with screw-in type tanks

PART # DESCRIPTION SUG. RETAIL1003-0257 Fuel inlet fitting; repl. OEM #27371-76A $5.95

FUEL INLET FITTING•Solid brass fitting•High flow design•Accepts 1/4” fuel line•For 84-06 Keihin butterfly and CV carburetors•Sold each

SUG. RETAIL

0703-0431

0703-0432

0640-0630

0640-0631

PART # DESCRIPTION SUG. RETAIL2102-0244 0.5 ohm 01-06 Twin Cam EFI models/

single fire; repl. OEM #31743-01 $79.95

0710-0144

0710-0145

0710-0146

4

SAMSONOne of the reasons our FatBook® gets fatter every year is because big names like Samson Exhaust continue to deliver cutting-edge new products for all of the latest bikes rolling off the assembly line as well as exhaust systems for the current trends in customs. The latest offerings from Samson demonstrate their desire to remain a leader in the highly competitive V-Twin exhaust market. Be sure your customers give them a look and a listen when shopping for exhaust.

PART # DESCRIPTION SUG. RETAILQUAD CHROME1800-1424 Street sweepers $699.951800-1426 Hellraisers 699.951800-1430 Slashers 699.951800-1432 Rip saws 699.95

PART # DESCRIPTION SUG. RETAILSINISTER BLACK1800-1425 Street sweepers $699.951800-1427 Hellraisers 699.951800-1431 Slashers 699.951800-1433 Rip saws 699.95

LEGEND SERIES EXHAUST SYSTEMS•Legendary style and function that could only come from Samson

•Boost horsepower and torque by up to 20 percent while also improving fuel efficiency

•Stepped headpipes turn from 13/4” to 21/4” improving the exhaust flow

•Available with either show-quality Quad Chrome finish or Sinister high-temp black ceramic coating; Sinister black retains heat inside the pipe to maximize power while the outer surface remains cooler than chrome pipes

•21/2” full coverage heat shields•Removable baffles ensure tuning requirements of today’s fuel-injection motors while emitting a deep guttural tone

•O2 sensor ports accept OEM 12mm sensors•Made in the U.S.A.

1800-1432

FOR 2012 SOFTAIL MODELS

1800-1425

ork

1800-1425

1800-1431

1800-1433

1800-1424

1800-1426

1800-1427

pp g

1800-1430

5

PART # DESCRIPTION SUG. RETAILQUAD CHROME1800-1442 Street sweepers $699.951800-1444 Hellraisers 699.951800-1446 Slashers 699.951800-1447 Rip saws 699.95

PART # DESCRIPTION SUG. RETAILSINISTER BLACK1800-1443 Street sweepers $699.951800-1445 Hellraisers 699.95

1800-1443

1800-1445

1800-1442

1800-1447

FOR 2012 DYNA MODELS

LEGEND SERIES EXHAUST SYSTEMS (CONT)

1800-1444

1800-1445

1800-1446

6

BASSANI XHAUSTDarryl Bassani showed up at our 2011 NVP National Sales Meetings in Madison, WI loaded with new products, all of his latest information and what you might call a “new look” for Darryl himself. We’re not certain he will be bringing fl owers to our 2012 show, but we are 100% sure he will be back again with even more new products for all the latest models and styles.

PART # DESCRIPTION SUG. RETAILFOR 12 FLD1800-1418 Chrome $699.951800-1419 Black ceramic 749.95

ROAD RAGE 2-INTO-1 SYSTEMS•Stepped headers merge into a straight 4” muffler•13/4” headpipe steps up to 17/8” into the collector to increase flow and improve performance

•4” muffler body with black billet end cap with machined contrasting flutes•Removable spiral-core louvered baffle included•Oxygen sensor ports•Include mounting hardware•Heat shields included•Made in the U.S.A.

es

PART # DESCRIPTION SUG. RETAIL1801-0578 For 12 FLD $299.95

4” SLIP-ON MUFFLER•Slip-on megaphone-style muffler features 16-gauge steel construction with removable flow-through baffle

•Chrome finish with black billet end cap with contrasting flutes•Bolt to stock locations with supplied hardware•Made in the U.S.A.

$

PART # DESCRIPTION SUG. RETAIL1801-0577 For 12 FLD $299.95

4” SLIP-ON QUICK CHANGE SERIES MUFFLER•Muffler features 16-gauge steel construction and chrome finish•Straight can-style muffler body with removable baffle•Comes with black billet end cap with contrasting flutes•Distinctive aggressive exhaust sound•Improve power and performance•Optional billet end caps (sold separately; see 2012 Fatbook, page 339)

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1861-0790 18mm x 1.5 $11.951861-0791 12mm x 1.25 11.95

O2 SENSOR PORT PLUGS•Allow non-sensor HD models to run newer-style exhaust systems equipped with O2 sensor ports

•Simply scew it into non-essential sensor ports•Sold in pairs•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1861-0784 O2 port bushing adaptors $11.95

O2 PORT BUSHING ADAPTER•Threaded outer and inner adapters reduce O2 sensor port from 18mm to 12mm allowing riders to use our exhaust pipes on select newer-model motorcycles

•Sold in pairs•Made in the U.S.A.

1861-0790

1861-0791

1800-1418

7

PART # DESCRIPTION SUG. RETAIL1802-0219 For 09-12 FLHT/FLHR/

FLTR/FLHX models $399.95

2-1-2 HEADER•Replacement non-catalyst header for 09-12 Dresser models with 2-1-2 OEM-style catalyst header and dual mufflers

•Chrome-plated, mild-steel construction•Increases exhaust flow and provides less heat to riders leg

•Reuses OEM heat shields and cross-under pipe•Includes both large (18mm) and small (12mm) O2 bungs

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 70-84 FX/FXE/FL/FLH MODELS1800-1406 Slash-cut $369.95

PART # DESCRIPTION SUG. RETAILFOR 70-84 FX/FXE/FL/FLH MODELS (CONT)1800-1407 Tapered $369.95

13/4” “M” PIPES•For 70-84 FX/FXE/FL/FLH models with Baker 6-speed (6-4) transmissions•Will not work with straight Baker 6-speed kicker arm•Must use early OEM-style offset kicker with swivel pedal•Rear pipe clears the big FL battery and exits over the transmission•One-piece front pipe fits inside the frame and clears the FL floorboards•21/2” muffler bodies•Provides great ground clearance•Rear pipe heat shield and mounting bracket are included•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR 12 FLD1801-0580 Slash-out $199.951801-0581 Slash-down 199.95

SLIP-ON REPLACEMENT MUFFLER•4” muffler features an all-steel core that won’t burn out•Show-quality chrome finish will last for years•Muffler uses stock mounts•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOR RINEHART 3.5 MUFFLERS1802-0223 Contrast Cut $99.951802-0224 Chrome 99.951802-0225 Black Ops 99.95FOR RINEHART 4” MUFFLERS1802-0226 Contrast Cut 99.951802-0227 Chrome 99.951802-0228 Black Ops 99.95FOR SCREAMIN’ EAGLE 3.5” MUFFLERS1802-0229 Contrast Cut 99.951802-0230 Chrome 99.951802-0231 Black Ops 99.95FOR SCREAMIN’ EAGLE 4” MUFFLERS1802-0232 Contrast Cut 99.951802-0233 Chrome 99.951802-0234 Black Ops 99.95

PART # DESCRIPTION SUG. RETAILFOR BASSANI SHORT MEGAPHONE (1/2” INTERNAL LIP)1802-0235 Contrast Cut $99.951802-0236 Chrome 99.951802-0237 Black Ops 99.95FOR BASSANI LONG MEGAPHONE (1” INTERNAL LIP)1802-0238 Contrast Cut 99.951802-0239 Chrome 99.951802-0240 Black Ops 99.95FOR VANCE & HINES 3.5” MUFFLERS1802-0241 Contrast Cut 99.951802-0242 Chrome 99.951802-0243 Black Ops 99.95FOR VANCE & HINES 4” MUFFLERS1802-0244 Contrast Cut 99.951802-0245 Chrome 99.951802-0246 Black Ops 99.95

ELITE MERC EXHAUST END CAPS•CNC machined billet aluminum construction •Available in chrome, Contrast Cut™ and Black Ops™•Contrast Cut starts with a polished end cap that has been black anodized, then re-cut to open up the design

•Black Ops features gloss black on top of a contrasting textured black for the toughest, best-looking finish yet

•Sold each•Made in the U.S.A.

SUG RETAIL

Contrast Cut™Contrast Cut™

Chrome

Black Ops™

1801-0580

1801-0581

1800-1406

1800-1407

NON-FOLDING SIDE MOUNT LICENSE PLATE BRACKET/LICENSE PLATE BACKING PLATE•Side-mount attaches to the lower shock bolt for a clean, tucked-in look•Billet license plate backing plate bolts directly to the mount and has built-in white LED light for illumination in the license frame•Side mounts and backing plates sold separately

8

PART # DESCRIPTION SUG. RETAILSWINGARM-MOUNT LICENSE PLATE MOUNT (1/2” SHOCK BOLT)2030-0573 Chrome $104.952030-0620 Gloss black 104.95

PART # DESCRIPTION SUG. RETAILLICENSE PLATE BACKING PLATES W/ LED LICENSE PLATE LIGHT2030-0618 Chrome $169.952030-0619 Gloss black 169.95

PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK SUG. RETAILMOTO CROSSBAR HANDLEBAR0601-1855 Contrast Cut 2.75” 39.5” 5.8” 3.75” $279.950601-1856 Black Ops 2.75” 39.5” 5.8” 3.75” 279.95MINI APE CROSSBAR HANDLEBAR0601-1853 Contrast Cut 9” 33” 5.75” 5.5” 289.950601-1854 Black Ops 9” 33” 5.75” 5.5” 289.95

1” MOTO CROSSBAR HANDLEBARS•Moto Crossbar handlebar has a low-rise aggressive design with stylized billet cross bar•Mini Ape Crossbar handlebar is reminiscent of early BMX bikes•Heim joints on both ends of crossbar add a mechanical look and allow crossbar to be tightened until snug•Knurling at 3.5” on-center for standard HD (non-springer) applications only•Accept stock or aftermarket hand controls•Contrast Cut™ is a gloss black finished bar with a Contrast Cut crossbar •Black Ops™ is a textured black finished bar with a Black Ops crossbar•Made in the U.S.A.

Contrast Cut™Detail view

2030-06182030-0619

2030-0620

2030-0573

0601-1855

0601-1854

9

PART # DESCRIPTION SUG. RETAIL1710-1474 For 03-09 XB9R/S (all), 04-09 XB12R/S (all) $103.95

REAR BRAKE ROTOR•Rotors are heat-treated stainless steel construction•Round profile with new lightweight hole pattern construction•Solid-mount, 9.45” diameter•Sold each

FITS MODEL BLACK PART # RUSSELL REF. # LINES PER KIT SUG. RETAILFor 08-12 FLT, FLHT, FLHX, FLHR w/out ABS 1741-3551 R08778DS/B 1 $131.95

BRAIDED BRAKE LINE KIT•Braided brake lines exceed OEM pressure specifications, reduce brake line expansion and look good

•Feature Teflon® inner liner and stainless steel outer braid for smooth fluid transfer and high strength

•Factory-assembled for correct fit and reliability•Available in black

BRAKE HOSESSTAINLESS STEEL PART # SUG. RETAIL BLACK PART # SUG. RETAIL RUSSELL REF # LENGTH7/16” 35° UPPER BANJO1741-3552 $57.95 1741-3547 $59.95 R08990/BC 48”1741-3553 57.95 1741-3548 60.95 R08991/BC 50”1741-3554 58.95 1741-3549 61.95 R08992/BC 52”1741-3555 59.95 1741-3550 62.95 R08993/BC 54”

PRO SWIVEL™ BRAKE HOSES•Available in clear-coated stainless steel with chrome fittings or black coating stainless steel outer band with black fittings

•Features Russell’s exclusive 360° swivel banjo system (patent pending)•The banjo is incorporated at the caliper end of the hose assembly•Makes the rotation alignment hassle free•Engineered using two O-rings for a positive seal•Supported by 305 stainless steel retention pin for permanent attachment•Using all stock mounting locations and hardware, simply route your hose and attach the banjo at the master cylinder

•All lines have a 3/8” 90° banjo at the caliper end•Meet or exceeds DOT FMVSS-571-106 standards

Stainless Steel

360° Swivel banjo

Black

STOCK LENGTH FRONT BRAKE LINES

10

PART # DESCRIPTION SUG. RETAIL2050-0119 For 11-12 FXS/FLST and 12 FXD/FXDWG $49.952050-0120 For 96-10 FXST/FLST 97-11 FXD (except 10-11 FXDS), 97-12 Dressers, H-D FL Trikes (except 10-12 FLHX/FLHXXX/FLTRX), 99-03 XL 49.952050-0121 For 10-12 FLHX, 10-12 FLTRX (except CVO models) 49.952050-0122 For 10-12 FLHX CVO, 10-12 FLTRX CVO 49.952050-0124 For 04-12 XL, 10 FXDS 49.952050-0123 Universal 44.95

MAGIC STROBE BRAKELIGHT FLASHER•10 user selectable flash/strobe patterns•Over-current/thermal/short circuit/revierse wiring protection

•84W, 12V system•Works with LED or incandescent bulbs•Measures 2.25” L x 1.25” W x .5”H

PART # DESCRIPTION SUG. RETAIL3601-0242 Fully synthetic 20W-50, 55 gallon drum $14.95

FULLY SYNTHETIC 20W-50 MOTORCYCLE LUBRICANT•This fully synthetic base oil teamed with our selective additive package yields exceptional viscosity stability and lasting anti-oxidation qualities that cannot be derived from conventional base oils

•Specifically engineered and produced as a multi-fill lubricant for Harley-Davidson® V-Twin motors, transmissions and primaries

•Remarkable film strength and heat protection•Long-lasting protection against engine wear•Outstanding protection against sludge buildup•Excellent sealing characteristics providing maximum power output•Meets all warranty performance criteria for Harley-Davidson engines and does not void new vehicle warranties

•Meets and exceeds API CI-4/SL service rating•Sold to dealer in 55 gallon drum; sold to consumer per quart (suggested retail reflects each pricing)

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3603-0030 Primary oil, 55 gallon drum $6.95

PRIMARY OILFOR BIG TWINS•Formulated for use in all 84 and newer Big Twin Harley-Davidson® motorcycles equipped with a wet-type diaphragm spring clutch

•Specifically made for high performance primaries

•Outstanding film strength provides excellent wear protection and durability

•Exceptional extreme pressure additive package

•Sold to dealer in 55 gallon drum; sold to consumer per quart (suggested retail reflects each pricing)

•Made in the U.S.A.

2050-0119

2050-0120

2050-0121

2050-0122

2050-0123

2050-0124

11

PART ## OF CELLS

COLD CRANKING AMPS (CCA)

AMP HOUR (AH) DIMENSIONS WEIGHT (LB) LEFT POST RIGHT POST

SUG. RETAIL

2113-0260 12 410 20 4.5” L x 3.5” W x 4.25” H 2.6 + - $189.952113-0265 12 410 20 4.5” L x 3.5” W x 4.25” H 2.6 - + 189.952113-0261 16 500 28 4.5” L x 4.5” W x 4.25” H 3.4 - + 269.952113-0273 16 500 28 4.8” L x 3.4” W x 5.8” H 3.5 - + 299.95

EVO2 12V LiFePO4 MOTORCYCLE BATTERIES•PART #2113-0273 16 Cell HD is designed for use in all Harley Davidson OEM and aftermarket Softail, Dyna, FL and XL chassis with stock or modified engines; replacement/upgrade for a YTX20 or YiX30

•PART #2113-0261 is designed for FL/Trike applications and is approved for OEM displacement as well as increased displacement and modified engine combinations

•PART #s 2113-0260 and 2113-0265 are designed ONLY for OEM displacement, UN-MODIFIED, Softail, Dyna and XL applications; for a Softail, Dyna, or XL with ANY modification or increased displacement, please select the 16 Cell HD, PART #2113-0273

•Well over 3X the life span of lead acid batteries•Still has over 80% of its capacity after 2000 full discharge and recharge cycles•Will not sulfate or damage itself, regardless of charge level•No requirement to trickle charge, even during off season storage•Still has more than 90% of its charge after a year, regardless of storage temperature (Note: Security systems or other accessories that are on will still run-down the battery)

•Impact, vibration and water resistant•Contains no acid or harmful liquids, which allows mounting in any position in OEM or custom applications without the possibility of corrosive leakage

•Less than 1/3 the weight of an OEM lead acid battery•Handles higher temperatures better than a lead acid battery•Works just as well in cold weather (Note: Below 40°F/5°C; press starter button for five seconds, wait thirty seconds, and start; may need to repeat one to three times)

•Compatible with OEM and aftermarket alternators and electrical systems•Strongest 3-year warranty in the business backed by a United States company•No special charger required but is available for convenience and increased life span (2012 Fat Book, Pg. 1402, PART #3807-0104)

•Designed, developed and assembled in the U.S.A.

NOTE: Battery is smaller than OEM batteries and may require spacers and shims to properly install and secure.

PART # DESCRIPTION SUG. RETAIL2113-0271 EVO2 LiFePO4 16 Cell HD battery quick-disconnect kit $59.95

EVO2 LiFePO4 16 CELL BATTERY QUICK-DISCONNECT KIT•Designed to allow removal of the battery from the bike quickly and easily

•Perfect for bikes with a large parasitic draw or racing vehicles that use a total loss system

•Built to work the extreme power of the 16 Cell and 16 Cell HD

•Kit includes two 6-gauge cables with quick-disconnect connectors

PART # DESCRIPTION SUG. RETAIL2113-0272 EVO2 LiFePO4 16 Cell HD battery extension kit $9.95

EVO2 LiFePO4 16 CELL BATTERY EXTENSION KIT•Because of the dramatic size differences that can exist between the OEM battery and the EVO2 LiFePO4 battery equivalent, cable extension kit may come in handy in some applications

•Built to work the extreme power of the 16 Cell and 16 Cell HD•Pre-made 6-gauge cables with terminal ends•5” long

2113-0273

2113-0261

2113-0260

WIRE EXTENSIONS FOR HD HEATED GRIPS•2120-0498—Gives the rider two 16-gauge wires along with simple to install nylon butt connectors

•2120-0499—Gives the rider a jacketed, two-conductor wire for each side along with simple to install nylon butt connectors

•Cut-n-splice to your desired length•Made in the U.S.A.

12APRIL 2012 | 9901-1233

NAMZ CUSTOM CYCLEFounder Jeff Zielinski and his NAMZ team continue to design and manufacture all of their innovative electrical products for American V-Twin motorcycles out of their headquarters in Pennsylvania. Dealers and riders everywhere have come to know this name for products that are dependable, logical and even time-saving when compared to OE. FatBook® or OldBook®, if it is electrical, turn to NAMZ for value-laden trusted parts.p

PART # DESCRIPTION SUG. RETAIL1020-1716 For 06 Dyna, 07-12 FX and XL, 07-08

Touring models $129.951020-1714 For all 08-09 XB9 & XB12 Buell models

with stock ECM 84.95

PART # DESCRIPTION SUG. RETAIL1020-1715 For 06 Dyna, 07-12 FX and XL, 07-08

Touring models $195.951020-1717 For 10-12 Touring models, all 12

Softail, Dyna and VRod models 129.95

ADJUSTABLE O2 ENRICHMENT DEVICES W/ AFR DISPLAY•Enrichment devices are intended to give riders the proper fuel mixture when adding performance mufflers, pipes and high flow air filter upgrades•Adjustable versions allow for external adjustment of the air-fuel ratio in closed-loop mode•Cheaper than other fuel management programmers or auto tuners•Reduces engine temperature between 20-30 degrees•Recommended for models with high-flow air intakes and exhaust•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1861-0789 O2 extension harness $24.95

O2 SENSOR HARNESS EXTENSION AND BUNG ADAPTER•Allow the use of exhaust systems with 18mm O2 sensor bungs to be used with late model bikes with 12mm O2 sensors

•Reduce the 18mm O2 bungs to 12mm O2 bungs found on select 10-12 models

•Wiring harness comes pre-assembled with connector pins•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2120-0494 For 07-12 models (except FLT/FLHT

11-12 Softail, 12 Dyna) $41.952120-0495 For 07-12 FLHT/FLHR/FLHX/HD FL Trike

models (all wires except electronic throttle control extensions) 56.92

2120-0496 For 96-06 models (except FLT/FLHT) 41.952120-0497 For 96-06 FLT/FLHT models 51.95

UNIVERSAL HANDLEBAR SWITCH WIRE EXTENSIONS•Designed for those that would rather stagger-cut and solder in order to lengthen their wiring for taller bars

•Wires are pre-stripped with the slug left in place to prevent fraying and the other end has machine crimped terminals that can easily be re-installed into the factory connector

•All kits come 100% complete with OEM color matching wire and all of the heat-shrink tubing needed to do the job right

•24” universal handlebar switch wire extensions; fits up to 20” Apes. •Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2120-0498 For all 96-12 models (except 08-12 FLHT/

FLHR/FLHX/FLTR and HD FL Trike models) $4.952120-0499 For all 08-12 FLHT/FLHR/FLHX/FLTR and HD FL

Trike models 7.95

2120-0498

2120-0499

2120-0495

2120-0496

R

tor pins

1020-1714 1020-1715

1020-1716

1020-1717