curriculum vitae naira helen campbell-kyureghyan, ph.d. … · 2018-01-17 · page 1 of 33 december...

of 33

December 2017

CURRICULUM VITAE

Naira Helen Campbell-Kyureghyan, Ph.D. Professor, Chair

Department of Industrial and Manufacturing Engineering College of Engineering & Applied Sciences

University of Wisconsin-Milwaukee

GENERAL INFORMATION

EDUCATION

Yerevan Polytechnic Institute (USSR) Electrical and Control Eng. B.S.(w/Honors) 1992

State Eng. University of Armenia Electrical and Control Eng. M.S./Cand of Sci 1995

American University of Armenia/UofCA Industrial Engineering M. Eng 1996

The Ohio State University Ind. Eng./Biomechanics Ph.D. 2004

EXPERIENCE

Academic:

7/16 – pres Chair, Department of Industrial & Manufacturing Engineering, UWM

7/15 – 6/16 Sabbatical Leave (University of Tel-Aviv/ Budapest Institute of Technology)

7/15 – pres Professor, Department of Ind. & Manufacturing Engineering, UWM

4/14 – pres Founding Director of Biomedical Imaging and Testing Laboratory (BITL), Accelerator

Building, Innovation Campus, UWM

7/13 – 6/15 Chair, Department of Industrial & Manufacturing Engineering, UWM

1/13 – pres Adjunct Associate Prof., Department of Orthopaedic Surgery, CTSI, MCW

7/11 – 7/15 Associate Prof., Department of Ind. & Manufacturing Engineering, UWM

7/11 – 7/15 Associate Prof., Department of Mechanical Engineering, UWM

12/09-pres Director, Consortium for Advanced Research in Gas Industry, (CARGI), UWM

9/09 – pres Founding Director of Spine Biomechanics Laboratory

7/09- 6/11 Asst. Prof., Department of Ind. & Manufacturing Engineering, UWM

8/07 – 6/09 Director of the Center for Ergonomics, University of Louisville (UofL)

5/07 – 8/12 Associate Faculty of Orthopaedic Surgery, UofL

12/06 – 6/09 Co-Director of the Biodynamics Laboratory, UofL

7/06 – pres Associate Faculty of Bioengineering, UofL

11/05 – 8/07 Associate Director of the Center for Industrial Ergonomics, UofL

7/05 – 6/09 Asst. Prof., Department of Ind. Engineering, UofL

2001-2004 Research Assistant, Biodynamics Lab, The Ohio State University

of 33

December 2017

1999-2001 Teaching/Research Assistant, Biomed. Eng. Center, The Ohio State University

1997-1998 Visiting Scholar, College of Engineering, The Ohio State University

Non-Academic Positions:

1996-1997 Research Engineer, ITALGAS/SNAMPROGETTI, European Union Consortium

1994-1996 Research Scientist, ERC, American University of Armenia

1990-1993 Research Scientist, National Academy of Science, USSR

KEY ADMINISTRATIVE/LEADERSHIP ACCOMPLISHMENTS

FUND RAISING

• $4.28 million in research funding ($2.82 million external, $1.46 million internal)

• $25.13 million raised in in-kind donations and gifts for equipment and software

• Raised funds for endowment of first ever engineering department level student

scholarships –in logistics and operations research sponsored by FedEx Smart Post

• Raised funds for several new research and teaching laboratories at UWM

• Contributed to over a dozen fundraising activities annually

ENHANCEMENTS TO ACADEMIC PROGRAMS AND PARTNERSHIPS

• Established a partnership for a Connected Enterprise program at UWM with Rockwell

Automation, CISCO, SAS and Siemens (FANUC and Microsoft in progress)

• Facilitated 2 international program partnerships and signed MOUs with UWM (CGU -

Taiwan and BME- Hungary)

• Established a partnership with UW-Parkside for Engineering Management program

• Advanced innovation and UW System-wide collaboration

• Restructured Industry Advisory Board to promote greater industry partner engagement

• Revamped Industrial Engineering curriculum to improve student flow and graduation rates

• Facilitated the establishment of a new IME department teaching and research laboratory

• Initiated several departmental and college-wide policies related to graduate and

undergraduate programs to improve the quality of the programs

• Developed multiple research policies regarding fixed price contracts, shared research

facilities, export control, IP transfer, etc.

• Mentored and supported student start-up challenge teams

• Enhanced undergraduate student research experience curriculum

• Developed partnership and brought collaboration of the department with several other units across UWM

• Research/Service partnerships with WE Energies, Harley Davidson, and many others

of 33

December 2017

ACTIVITIES TO RAISE RESEARCH PROFILE OF THE DEPARTMENT AND UNIVERSITY

• Facilitated and organized the International Educators Conference at UWM that was sponsored by Rockwell Automation in Summer 2017 (over 50 professors from 32 institutions worldwide)

• Delivered 7 talks internationally (5 institutions in Israel, Hungary, Taiwan) since 2016

• Developed international research collaborations with 3 countries and 7 institutions

• Served on federal agency panels to present UWM research program

• Served on organizing committees of national and international conferences

• Attended and promoted the department on dozens of occasions to community and business partners

• Fundraised for the department, college and UWM

• Promoted and facilitated several industry partnerships with the faculty

• Mentored many junior faculty and attended federal agency (e.g. NSF) meetings with them

• Served as an Associate Editor of the Journal of Electromyography and Kinesiology

• Chaired committees of National Societies and founded local student chapters

RESEARCH, SCHOLARSHIP, AND PROFESSIONAL ACTIVITIES

Peer-Reviewed Journal Papers

1. Wiener, M., Otieno, W., Campbell-Kyureghyan, N. (2017) “Survey Based Assessment

of Tethered Tool Usage in the Power Generation Industry and U.S. Coast Guard,” Journal

of Ergonomics, S6: 1-9.

https://www.omicsonline.org/open-access/survey-based-assessment-of-tethered-tool-

usage-in-the-power-generationindustry-and-us-coast-guard-2165-7556-1000-S6-002.pdf

2. Johnson, B., Otieno, W., Campbell-Kyureghyan, N. (2017) “Quantitative and

Qualitative Evaluation of the Lift-Assist Device During Jackhammering Task,” Journal of

Ergonomics, 7 (4): 1-8.

https://www.omicsonline.org/open-access/quantitative-and-qualitative-evaluation-of-

the-liftassist-device-duringjackhammering-task-2165-7556-1000210.pdf

3. Campbell-Kyureghyan, N. (2017) “Injury Risks Associated with Climbing in the Wind Energy Generation Industry,” Incident Prevention, 14(3): 18-24.

https://incident-prevention.com/ip-articles/injury-risks-associated-with-climbing-in-the-wind-energy-generation-industry

4. Johnson, B., Otieno, W., Campbell-Kyureghyan, N. (2016) “Influence of Jackhammer

Weight on Grip Pressure, Muscle Activity, and Hand–Arm Vibration of the Operator,” IISE

Transactions on Occupational Ergonomics and Human Factors, 5(1): 12-22.

http://www.tandfonline.com/doi/abs/10.1080/24725838.2016.1269852?journalCode=ue

hf21

5. Sedaghat-Nejad, E., Mousavi, S. J., Hadizadeh, M., Narimani, R., Khalaf, K., Campbell-

Kyureghyan, N., Parnianpour, M. (2015) “Is there a Reliable and Invariant Set of Muscle

Synergy During Isometric Biaxial Trunk Exertion in the Sagittal and Transverse Planes by

Healthy Subjects?” Journal of Biomechanics, 48(12): 3234-3241.

https://www.omicsonline.org/open-access/survey-based-assessment-of-tethered-tool-usage-in-the-power-generationindustry-and-us-coast-guard-2165-7556-1000-S6-002.pdf

https://www.omicsonline.org/open-access/survey-based-assessment-of-tethered-tool-usage-in-the-power-generationindustry-and-us-coast-guard-2165-7556-1000-S6-002.pdf

https://www.omicsonline.org/open-access/quantitative-and-qualitative-evaluation-of-the-liftassist-device-duringjackhammering-task-2165-7556-1000210.pdf

https://www.omicsonline.org/open-access/quantitative-and-qualitative-evaluation-of-the-liftassist-device-duringjackhammering-task-2165-7556-1000210.pdf



http://www.tandfonline.com/doi/abs/10.1080/24725838.2016.1269852?journalCode=uehf21

http://www.tandfonline.com/doi/abs/10.1080/24725838.2016.1269852?journalCode=uehf21

of 33

December 2017

doi:10.1016/j.jbiomech.2015.06.032

http://www.sciencedirect.com/science/article/pii/S0021929015004777

6. Burnett, D., Campbell-Kyureghyan, N., Topp, R., Quesada, P. (2015) "Biomechanics of

Lower Limbs During Walking Among Candidates for Total Knee Arthroplasty with and

without Low Back Pain," BioMed Research International, Article ID 142562, 8 pages.

doi:10.1155/2015/142562

https://www.hindawi.com/journals/bmri/2015/142562/

7. Vakilzadeh, V., Asghari, M., Aalarieh, H., Campbell-Kyureghyan, N., Parnianpour, M.,

Khalaf, K. (2015) " A 3-D Stability-Based Dynamic Computational Model of Human Trunk

Movement: Towards the Development of a Paradigm for Forensic Spinal Injury

Biomechanical Analysis," Journal of Forensic Biomechanics, 6:119.

doi: 10.4172/2090- 2697.1000119

https://www.omicsonline.org/open-access/a-3d-stabilitybased-dynamic-computational-

model-of-human-trunk-movement-towards-the-development-of-a-paradigm-for-forensic-

spinal-injury-biomechanical-analysis-2090-2697-1000119.php?aid=42120

8. Schnorenberg, A. J., Campbell-Kyureghyan N. H, Beschorner, K. E. (2015)

"Biomechanical Response to Ladder Slipping Events: Effects of Hand Placement," Journal of

Biomechanics, 48(14): 3810-3815.


9. Ahmed. M., Campbell-Kyureghyan, N., Bertocci, G., Frost, K. (2014) "Identifying

Challenges to Securing Wheeled Mobility Devices Using Tiedowns and Occupant restraint

System from the User Perspective," IIE Transactions on Occupational Ergonomics and

Human Factors, 2(2): 94-104.

http://www.tandfonline.com/doi/abs/10.1080/21577323.2014.964379

10. Pliner, E., Campbell-Kyureghyan, N., Beschorner, K. (2014) "Effects of Foot Placement,

Hand Positioning, Age and Climbing Biodynamics on Ladder Slip Outcomes," Journal of

Ergonomics, 57(11), pp:1739-49,2014.

http://www.tandfonline.com/doi/abs/10.1080/00140139.2014.943681?needAccess=true&j

ournalCode=terg20

11. Campbell-Kyureghyan, N. (2013) "Evaluation of the Impact of Hearing Conservation

Training," CAOHS, 4:1-4.

http://www.caohc.org/updatearticles/winter2013.pdf?version=012914

12. Burnett, D., Campbell-Kyureghyan, N., Topp, R., Quesada, P., Cerrito, P. (2012) "A

Retrospective Study of the Relationship Between Back Pain and Unilateral Knee

Osteoarthritis in Candidates for Total Knee Arthroplasty," Journal of Orthopaedic Nursing,

31(6): 336-343. doi: 10.1097/NOR.0b013e31827425f4

http://journals.lww.com/orthopaedicnursing/Abstract/2012/11000/A_Retrospective_Study

_of_the_Relationship_Between.7.aspx

13. Campbell-Kyureghyan, N., Cooper, K. (2012) “Impact of Customized Training on

Learning Across Demographic Groups,” JPIIE, 9(1): 25-31.

http://www.piie.org/downloads/journal/v9n1_pdf/04%20Campbell-Kyureghyan.pdf

14. Campbell-Kyureghyan, N., Singh, G., Otieno, W., Cooper, K. (2012) “Impact of Light-

weight and Conventional Jackhammers on the Operator,” Journal of Work, 41(1): 4180-

4184. doi:10.3233/WOR-2012-0717-4180

http://dx.doi.org/10.1016/j.jbiomech.2015.06.032


https://www.hindawi.com/journals/bmri/2015/142562/

https://www.omicsonline.org/open-access/a-3d-stabilitybased-dynamic-computational-model-of-human-trunk-movement-towards-the-development-of-a-paradigm-for-forensic-spinal-injury-biomechanical-analysis-2090-2697-1000119.php?aid=42120




http://www.tandfonline.com/doi/abs/10.1080/21577323.2014.964379

http://www.tandfonline.com/doi/abs/10.1080/00140139.2014.943681?needAccess=true&journalCode=terg20

http://www.tandfonline.com/doi/abs/10.1080/00140139.2014.943681?needAccess=true&journalCode=terg20

http://www.caohc.org/updatearticles/winter2013.pdf?version=012914

http://journals.lww.com/orthopaedicnursing/Abstract/2012/11000/A_Retrospective_Study_of_the_Relationship_Between.7.aspx

http://journals.lww.com/orthopaedicnursing/Abstract/2012/11000/A_Retrospective_Study_of_the_Relationship_Between.7.aspx

http://www.piie.org/downloads/journal/v9n1_pdf/04%20Campbell-Kyureghyan.pdf

https://doi.org/10.3233/WOR-2012-0717-4180

of 33

December 2017

https://www.ncbi.nlm.nih.gov/pubmed/22317363

15. Ahmed, M., Campbell-Kyureghyan, N., Frost, K., Bertocci, G. (2012) “Ergonomic

Evaluation of the Wheelchair Transportation Securement Process,” Journal of Work, 41(1):

4924-30. doi: 10.3233/WOR-2012-0787-4924

https://content.iospress.com/articles/work/wor0787

16. Campbell-Kyureghyan, N., Cooper, K. (2011) “Improving Safety at Your Facility,” Modern

Castings, 11: 24-27.

https://www.researchgate.net/publication/233988167_Improving_Safety_at_Your_Facility

17. Campbell-Kyureghyan, N., Yalla, S. V., Burnett, D., Voor, M. (2011) “Effect of Orientation

on Measured Failure Strength of Thoracic and Lumbar Spine Segments,” Journal of the

Mechanical Behavior of Biological Materials, 4 (4): 549-557.


18. Burnett, D., Campbell-Kyureghyan, N., Cerrito, P., Quesada, P. (2011) “Symmetry of

Ground Reaction Forces and Muscle Activity in Asymptomatic Subjects during Walking, Sit-

to-Stand, and Stand-to-Sit Tasks,” Journal of Electromyography and Kinesiology, 21(4):

610-615.

http://www.sciencedirect.com/science/article/pii/S105064111100037X

19. Burnett, D., Campbell-Kyureghyan, N. (2010) “Quantification of Scan-Specific

Ergonomic Risk Factors in Medical Sonography,” International Journal of Industrial

Ergonomics. 40: 306–314.


20. Campbell-Kyureghyan, N. (2010) “Computational Modeling of the Lumbar Spine

Components: A Review,” International Journal for Computation Vision and Biomechanics, 3

(1): 1-11.

http://www.mukpublications.com/resources/ijcvbvol.3no1/ijcvb3-1-1.pdf

21. Burnett, D., Campbell-Kyureghyan, N., Topp, R. V., Quesada, P: M. (2009) “Asymmetry

in Vertical Ground Reaction Force and Hip Range of Motion in Asymptomatic Subjects and

Total Knee Arthroplasty Patients with or without Back Pain,” Gait and Posture, 30 (S2):

S140-S143.

http://www.gaitposture.com/article/S0966-6362(09)00562-1/fulltext

22. Campbell-Kyureghyan, N., Marras, W. (2009) “Combined Experimental and Analytical

Model of the Lumbar Spine Subjected to Large Displacement Cyclic Loads. Part I – Model

Description,” International Journal for Computational Vision and Biomechanics, 2 (2):

87-93.

http://www.mukpublications.com/resources/ijcvb2-1-8.pdf

23. Campbell-Kyureghyan, N., Marras, W. (2009) “Combined Experimental and Analytical

Model of the Lumbar Spine Subjected to Large Displacement Cyclic Loads. Part II – Model

Validation,” International Journal for Computational Vision and Biomechanics, 2 (2): 94-

104.


24. Leijnse, J., Campbell-Kyureghyan, N., Spektor, D., Quesada, P. (2008) “Assessment of

Individual Finger Muscle Activity in the Extensor Digitorum Communis by Surface EMG,”

Journal of Neurophysiology, 100(6): 3225-3235.

https://www.ncbi.nlm.nih.gov/pubmed/22317363

https://content.iospress.com/articles/work/wor0787

https://www.researchgate.net/publication/233988167_Improving_Safety_at_Your_Facility


http://www.sciencedirect.com/science/article/pii/S105064111100037X


http://www.mukpublications.com/resources/ijcvbvol.3no1/ijcvb3-1-1.pdf

http://www.gaitposture.com/article/S0966-6362(09)00562-1/fulltext



of 33

December 2017

http://jn.physiology.org/content/jn/100/6/3225.full.pdf

25. Campbell-Kyureghyan, N., Jorgensen, M., Burr, D., Marras, W. (2005) “The Prediction

of Lumbar Spine Geometry: Method Development and Validation,” Clinical Biomechanics,

20(5): 455-464.


26. Kyureghyan, S.G., Kyureghyan, N., and Hakopian, A.R. (2000) “One Class of Solution

Algorithms for Quadratic Programming,” Izvestia of National Academy of Science of

Armenia, 53(1): 91-95. (in Russian)

27. Kyureghyan, S.G., and Kyureghyan, N. (1998) “Search of Boundary Solutions for One Class

of Nonlinear Programming Problems,” Izvestia of National Academy of Science of Armenia,

51(3): 11-14. (in Russian)

28. Kyureghyan, N. and Kyureghyan, S.G. (1994) “Algorithms for the Optimal Measurement of

the Mass of Liquid Products in Tanks,” Izvestia of National Academy of Science of Armenia,

XLVII, 1-2: 33-40. (in Russian)

Peer-Reviewed Conference Papers

29. Otieno, W., Cook, M., Campbell-Kyureghyan, N. “Novel Approach to Bridge the Gaps of

Industrial and Manufacturing Engineering Education: A Case Study of the Connected

Enterprise Concepts,” Proceeding of the IEEE Frontier of Education Conference, Indianapolis,

IN, October 18-21, 2017.

30. Johnson, B., Campbell-Kyureghyan, N. “Dynamic Response of the Human Penis to

Tensile Loading at Various Strain Rates,” Proceedings of 41st Meeting of American Society

of Biomechanics, Boulder, CO, August 2-5, 2017.

31. Moore, D., Campbell-Kyureghyan, N. “User Experience and Task Completion Time Evaluation of Impact Protective Gloves,” Proceedings of XXIXth Annual Occupational Ergonomics and Safety Conference, Seattle, WA USA, 2017.

32. Ahmed, M., Campbell-Kyureghyan, N. “Injury-Specific Novel Safety Training Helps to Reduce Injuries in the Renewable Energy Generation Sector,” Proceedings of XXIXth Annual Occupational Ergonomics and Safety Conference, Seattle, WA USA, 2017.

33. Pliner, J., Campbell-Kyureghyan, N. “Changes in Oxygenation of the Knee

Flexor/Extensors Associated with a Prolong Kinesio-Tape Application: A Pilot Study,”

Proceedings of 40th Meeting of American Society of Biomechanics, Raleigh, NC, Aug 2-5,

2016.

34. Porter, Q., Johnson, B., Campbell-Kyureghyan, N. “Comparison of Upper Arm Muscle

Activity and User Tool Preference during Wrenching Task,” Proceedings of 40th Meeting of

American Society of Biomechanics, Raleigh, NC, Aug 2-5, 2016.

35. Johnson, B., Campbell, S., Campbell-Kyureghyan, N. “Comparison Of Kidney Elastic

Modulus Using Full Unconfined Compression and Probing Methods,” Proceedings of 40th

Meeting of American Society of Biomechanics, Raleigh, NC, 2016.

36. Pliner, J., Campbell-Kyureghyan, N.” Does Longer Application of Kinisiotape Delay the

Muscle Fatigue of The Knee Joint During Isotonic Flexion/Extension?,” Proceedings of XXI

ISEK Congress, Chicago, IL, July 5-9, 2016.

http://jn.physiology.org/content/jn/100/6/3225.full.pdf


https://www.researchgate.net/publication/318311292_Injury-Specific_Novel_Safety_Training_Helps_to_Reduce_Injuries_in_the_Renewable_Energy_Generation_Sector?_iepl%5BviewId%5D=w8OiZewJhTv6iXVbxoffJAwY&_iepl%5BprofilePublicationItemVariant%5D=default&_iepl%5Bcontexts%5D%5B0%5D=prfpi&_iepl%5BtargetEntityId%5D=PB%3A318311292&_iepl%5BinteractionType%5D=publicationTitle

https://www.researchgate.net/publication/318311292_Injury-Specific_Novel_Safety_Training_Helps_to_Reduce_Injuries_in_the_Renewable_Energy_Generation_Sector?_iepl%5BviewId%5D=w8OiZewJhTv6iXVbxoffJAwY&_iepl%5BprofilePublicationItemVariant%5D=default&_iepl%5Bcontexts%5D%5B0%5D=prfpi&_iepl%5BtargetEntityId%5D=PB%3A318311292&_iepl%5BinteractionType%5D=publicationTitle

of 33

December 2017

37. Ahmed, M., Campbell-Kyureghyan, N. “Assessing the Impact of a Training Intervention

within the Electric Utility Industry,” Proceedings of 9th International Scientific Conference

on the Prevention of Work-Related Musculoskeletal Disorders, Toronto, CA, June 22-25,

2016.

38. Wiener, M., Otieno, W., Campbell-Kyureghyan, N. “Measuring the Usage of Tethered

Tools While Working at Heights,” Proceedings of 9th International Scientific Conference on

the Prevention of Work-Related Musculoskeletal Disorders, Toronto, CA, June 22-25, 2016.

39. Campbell-Kyureghyan, N., Loshek, P., Otieno, W. “Differences in Fracture Tolerances of

the Hand under Dynamic Impact,” Proceedings of RSTU, Tel-Aviv, Israel, Feb 8-10, 2016.

40. Campbell-Kyureghyan, N. “Multi-Joint Pain, Rehabilitation and Prevention: A Chicken or

Egg Problem,” Proceedings of RSTU, Tel-Aviv, Israel, Feb 8-10, 2016.

41. Campbell-Kyureghyan, N. “The Value of Choice - What 21st-Century Technology Does for

Healthcare,” Proceedings of the International Conference on Healthcare & Management,

Taipei, Taiwan, June 26-29, 2016.

42. Johnson, B., Tomasiewicz, H., Campbell-Kyureghyan, N. " The Development of a Testable

Scoliosis Model Using Zebrafish,” Proceedings of IEEE/GLBC Annual Conference, Milwaukee,

WI, May 14-17, 2015.

43. Pliner, J., Campbell-Kyureghyan, N. "Can Kinesiology Tape Enhance Performance?”

Proceedings of IEEE/GLBC Annual Conference, Milwaukee, WI, May 14-17, 2015.

44. P. Bakhshande Nezhad, M. Sharifi, M. Nikkhoo, N. Arjmand, M. Sharif , K.Khalaf, N.

Campbell-Kyureghyan, M. Parnianpour, “Robust Adaptive Control of a Lumbar Spine

Model for Simulation of In-Vivo Motions,” Proceedings of IEEE/GLBC Annual Conference,

Milwaukee, WI, May 14-17, 2015.

45. Khalaf, K., Nikkhoo, M., Kuo, Y.W., Y.C. Hsu, Y.C., Parnianpour, M., Wang, J.L., Campbell-

Kyureghyan, N. “Recovering the Mechanical Properties of Denatured Intervertebral Discs

through Platelet-Rich Plasma Therapy,” Proceedings of 37th Annual International

Conference of the IEEE Engineering In Medicine and Biology Society, Milan, Italy, August,

2015.

46. Porter, Q., Campbell-Kyureghyan, N. “Ergonomic Wrench’s Affect on Muscle Activity

Associated with Simulated Gas Meter Change Out,” Proceedings of IEEE/GLBC Annual

Conference, Milwaukee, WI, May 14-17, 2015.

47. Frazier, S., Campbell-Kyureghyan, N. “Comparison of Grip Pressure Between Pipe

Wrench and Ergonomically Design Wrench during Wrenching,” Proceedings of IEEE/GLBC

Annual Conference, Milwaukee, WI, May 14-17, 2015.

48. Johnson, B. , Campbell-Kyureghyan, N. "Biomechanical Evaluation of a Lift Assist Device

While Using A Light Weight Jackhammer,” Proceedings of the HFES Annual Conference,

Chicago, IL, Oct 27-31, 2014.

49. Campbell-Kyureghyan, N., Johnson, B., Lomo-Tettey, D. “Muscle Activity Response to

Ankle Plantar Flexion Changes During Kneeling,” Proceeding of the XXth Congress of the

International Society of Electromyography and Kinesiology, Rome, Italy, July 15-18th, 2014.

50. Campbell-Kyureghyan, N., Lomo-Tettey, D. "Influence of Kneeling Duration on Muscle Co-

Activation Changes,” Proceeding of the XXth Congress of the International Society of

of 33

December 2017

Electromyography and Kinesiology, Rome, Italy, July 15-18th, 2014.

51. Hernandez, A., Johnson, B., Campbell-Kyureghyan, N. "Knee Strength and Muscle

Oxygenation Changes due to Prolonged Kneeling,” Proceedings of the XXVIth Annual

International Occupational Ergonomics and Safety Conference, El Paso, TX, June 5-6,

2014.

52. Ahmed, M., Campbell-Kyureghyan, N. "Reliability of Learning Assessment,” Proceedings of

the XXVIth Annual International Occupational Ergonomics and Safety Conference, El Paso,

TX, June 5-6, 2014 .

53. Dix, P. , Campbell-Kyureghyan, N. “Grip Pressure Assessment for Different Wrenching

Configuration Tasks,” Proceedings of the XXVIth Annual International Occupational

Ergonomics and Safety Conference, El Paso, TX, June 5-6, 2014.

54. Lomo-Tettey, D., Campbell-Kyureghyan, N. “Muscle Co-activation During Kneeling Task

with and without Kneeling Mat,” Proceedings of the XXVIth Annual International

Occupational Ergonomics and Safety Conference, El Paso, TX, June 5-6, 2014 .

55. Johnson, B., Campbell-Kyureghyan, N. “Response of Muscle Activity to a Jackhammering

Task with and Without a Lift Assist Device,” Proceedings of the XXVIth Annual International

Occupational Ergonomics & Safety Conference, El Paso, TX, June 5-6, 2014.

56. Campbell-Kyureghyan, N., Johnson, B., Jarnecke, D. "Ergonomic evaluation of lift-assist

device during jackhammering task,” Proceedings of the AGA Annual Operations Conference,

Pittsburg, PA, May 18-23, 2014.

57. Pliner, E., Beschorner, K, Campbell-Kyureghyan, N. "The Effects of Controlled and

Uncontrolled Climbing Styles on Slip Outcome,” Proceedings of NCUR, Lexington, KY, April 3-

4, 2014.

58. Hernandez, A., Campbell-Kyureghyan, N. “Utilization of Near Infrared Spectroscopy to

Compare Neutral and Plantar Flexed Ankle Posture While Kneeling in Full Flexion,”

Proceedings of NCUR, Lexington, KY, April 3-4, 2014.

59. Campbell-Kyureghyan, N., Yalla, S-V. “Effect of Strain Rate on Cyclic Deformation of

Thoracolumbar Spine Motion Segments,” Proceeding of the 5th International Conference on

Mechanics of Biomaterials and Tissue, Sitges, Spain, Dec 8-12, 2013.

60. Pliner, E., Beschorner, K., Campbell-Kyureghyan, N. “Effects of Foot Placement on Ladder

Slip Outcomes,” Proceedings of American Society of Biomechanics Conference, Omaha, NE,

September 4-7, 2013.

61. Lomo-Tettey, D., Johnson, B., Campbell-Kyureghyan, N. “Static Prolonged Kneeling:

Biomechanical Implications,” Proceedings of American Society of Biomechanics Conference,”

Omaha, NE, Sept 4-7, 2013.

62. Johnson, B., Dix, P., Campbell-Kyureghyan, N. "Evaluation of Grip Pressure and Hand-

Arm Vibration in Jack-Hammering Task With and Without a Lift Assist,” Proceedings of

American Society of Biomechanics Conference, Omaha, NE, Sept 4-7, 2013.

63. Paul, A., Lovell, M., Beschorner, K., Campbell-Kyureghyan, N. "Biomechanical Response to

Ladder Slipping Events: Effects of Hand Placement on Response and Recovery,” Proceedings of

American Society of Biomechanics Conference, Omaha, NE, Sept 4-7, 2013.

64. Campbell-Kyureghyan, N., Hernandez, A., Ahmed, M. "Effectiveness of First and Second

of 33

December 2017

Tier Safety and Ergonomics Training in Power Utilities,” Proceedings of the XXVth Occupational

Ergonomics & Safety Conference, Atlanta, GA, June 6-7, 2013.

65. Boda, S., Garg, A., Campbell-Kyureghyan, N. "Can the Revised NIOSH Lifting Equation

Predict Low Back Pain Incidence in a ‘90-day-pain-free-cohort?" Proceedings of the Human

Factors and Ergonomics Society Conference, Boston, MA, October 14-17, 2012.

66. Campbell-Kyureghyan, N., Burnett, D., Rao, R., Beschorner, K. "Assessment of Symmetry

in Kinetic and Kinematic Parameters in Asymptomatic Subjects and Patients With LBP During

Sit-to-Stand and Stand-to-Sit,” Proceedings of the International Society of Electrophysiology

and Kinesiology Biennial Congress, Brisbane, Australia, July 19-21, 2012.

67. Campbell-Kyureghyan, N., Singh, G., Strobel, D., Cooper, K. “Impact of Lightweight and

Conventional Jackhammers on the Operator,” Proceedings of International Ergonomic

Association World Congress, Recife, Brazil, February 12-16, 2012.

68. Ahmed, M., Campbell-Kyureghyan, N., Frost, K., Bertocci,G. “Ergonomic Evaluation of the

Wheelchair Transportation Securement Process,” Proceedings of International Ergonomic

Association World Congress, Recife, Brazil, February 12-16, 2012.

69. Singh, G., Campbell-Kyureghyan, N., Strobel, D., Cooper, K. “Affect of Weight and Type of

Jackhammer on Vibration and Grip Pressure,” Proceedings of American Society of

Biomechanics (ASB), 2011.

70. Cooper, K., Campbell-Kyureghyan, N. “Ergonomics in Electric Power Generation Utilities,”

Proceedings of NORA/ NIOSH/CDC Symposium - Achieving Impact Through Research and

Partnerships, Cincinnati, OH, July 12-13, 2011.

71. Tucker, D., Campbell-Kyureghyan, N. “Evaluation of Impact Resistant Gloves,” Proceedings

of NORA/ NIOSH/CDC Symposium - Achieving Impact Through Research and Partnerships,

Cincinnati, OH, July 12-13, 2011.

72. Ahmed, M., Campbell-Kyureghyan, N. “Surveillance of Work-Related Musculoskeletal Pain

(WMSP) Using Employee Input,” Proceedings of NORA/ NIOSH Symposium - Achieving

Impact Through Research and Partnerships, Cincinnati, OH, July 12-13, 2011.

73. Campbell-Kyureghyan, N. , Jarnicke, D. “Comparison of Standard versus Light-weight

Jackhammers,” Proceedings of 2011 AGA Operations Conference,” Orlando, FL, May 2-5, 2011.

74. Campbell-Kyureghyan, N., Cooper, K. “Improving Ergonomics and Safety in Foundries,”

Proceedings of the American Foundry Society Metal Casting Congress, Schaumburg, IL, April 5-8, 2011.

75. Campbell-Kyureghyan, N., Cooper, K. “Effectiveness of Ergonomic Training in Small

Businesses,” Proceedings of Southeast Asian Ergonomics Society (SEAES) Conference, Cebu,

Philippines, December 11-14, 2010.

76. Cooper, K., Campbell-Kyureghyan, N. “A Closer Look at a Tablet PC Program: The

Faculty Perspective,” Proceedings of American Society of Engineering Education (ASEE)

NC, Session 3D, pp: 1-6, 2010.

77. Castone, S., Campbell-Kyureghyan, N., Cooper, K. “The Perceived Impact of a

Mandatory Tablet Personal Computer (TPC) Program on Underrepresented Students,”

Proceedings of American Society of Eng Education (ASEE) NC, Session 3D, pp: 1-7, 2010.

78. Cooper, K. N., Campbell-Kyureghyan, N. H., Sommerich, C. M. “Comparative Study of

of 33

December 2017

Computer Usage Patterns and Prevalence of Musculoskeletal Symptoms Among College

Students,” Proceedings of Human Factors & Ergonomics Society (HFES) Annual Meeting,

pp: 615-619, 2009.

79. Burnett, D.R., Yalla,S.V., Campbell-Kyureghyan, N. H., Hadavale, R. “Do Stabilizing

Forearm Braces Affect Elbow and Spine Posture During Wheelbarrow Pushing Tasks?”

Proceedings of Human Factors and Ergonomics Society (HFES) Annual Meeting, pp: 930-

934, 2009.

80. Yalamarty, A., Jampana, V., Campbell-Kyureghyan, N. H., Cooper, K. “Effect of Electric

Utility Lineman Gloves on Strength and Efficiency,” Proceedings of Human Factors and

Ergonomics Society (HFES) Annual Meeting, San Antonio, TX, October 19-23, 2009.

81. Ahmed, M., Campbell-Kyureghyan, N., Cooper, K. “Development of an Algorithm to

Evaluate Injuries among Power Utility Workers,” Proceedings of International Occupational

Ergonomics and Safety Society Meeting, pp: 1-5, 2009.

82. Caston, S., Campbell-Kyureghyan, N. , Cooper, K. “Assessment of Ergonomic Training in

Small Business Foundries,” Proceedings of International Occupational Ergonomics and

Safety Society Meeting, pp: 1-6 , 2009.

83. Cooper, K. N., Sommerich, C. M., Campbell-Kyureghyan, N. “Technology in the

Classroom: College Students’ Computer Usage and Ergonomic Risk Factors,” Proceedings

of ASEE SE Section, pp:1-10, 2009.

84. Campbell-Kyureghyan, N. H., Burnett, D.R. “Biomechanical Analysis of Five Different

Scan Types Performed by Professional Ultrasound Technicians,” Proceedings of 9th

Southeast Asian Ergonomics Society (SEAES) Meeting, pp: 762-769, 2008.

85. Cooper, K. N., Campbell-Kyureghyan, N. H., Sommerich C. M. “Computer Usage and

Ergonomic Risk Factors Among College Students,” Proceedings of 9th Southeast Asian

Ergonomics Society (SEAES) Meeting, pp: 298-307, 2008.

86. Burnett, D. , Campbell-Kyureghyan, N. H. “Ergonomic and Biomechanical Evaluation of

Work-Related Risk Factors in Sonography,” Proceedings of Human Factors and Ergonomics

Society (HFES) Annual Meeting, pp: 890-894, 2008.

87. Campbell-Kyureghyan, N.H., Marras, W.S., “Cumulative Effects of Load Frequency and

Velocity on the Lumbar Spine Response During a Repetitive Lifting Task,” Proceedings of

Human Factors and Ergonomic Society (HFES) Annual Meeting, pp: 1274-1278, 2005.

BOOK CHAPTERS

Campbell-Kyureghyan, N., Beschorner, K. “Fall Risk in Gas and Oil Extraction - Research,

Control, and Safety Practice.” Chapter 38 in “Fall Prevention and Protection: Principles,

Guidelines, and Practices,” to be published by CRC Press, Taylor & Francis Group. [in prep]

Campbell-Kyureghyan, N. “Fall Risk in Gas Industry Sector - From Research to Practice”.

Chapter 54 in “Fall Prevention and Protection Applications in the Gas and Oil Extraction and

Process Sector,” to be published by CRC Press, Taylor & Francis Group. [in prep]

Garg, A., Campbell-Kyureghyan, N., Kapellusch, J., Yalla, S.V. “Low Back: Musculoskeletal

Disorders, Job Evaluation and Design Principles,” Chapter 31 in "The Occupational Environment

- Its Evaluation, Control, and Management" 3rd edition, AIHA Publication, 2011.

of 33

December 2017

Garg, A., Campbell-Kyureghyan, N., Seo, N., Yalla, S.V., Kapellusch, J. “Upper Extremities:

Musculoskeletal Disorders, Job Evaluation and Design Principles,” Chapter 32 in "The

Occupational Environment - Its Evaluation, Control, and Management,"3rd edition, AIHA

Publication, 2011.

INTERVIEWS

Guests: N. Campbell-Kyureghyan

Interview for Milwaukee Engineer: "Ergonomics of Wrenching"

January 20th, 2015.

Campbell-Kyureghyan, N., Gilbert, D., Thompson, B.

- "UWM Panel Presentation and Discussion – Building Innovative Research,” SCUP 2015 North Central Symposium: Mission/Vision/Planning Alignment - Your Institution and Your Business Community, Milwaukee, WI, 2015.

Guests: N. Campbell-Kyureghyan

Radio Interview by Discovery World: "Undergraduate Research at UWM"

October 8th, 2014

Guests: N. Campbell-Kyureghyan (UWM/CARGI) and Andy Lobo (SnapOn Inc)

“UWM Today with Tom Luljak” WUWM Radio Program

Episode “UWM & Snap on Tools Team Up to Develop A New Wrench"

January 9th, 2014. (Interview).

http://blog.wuwm.com/post/uwm-snap-tools-team-develop-new-wrench

Guests: N. Campbell-Kyureghyan (UWM/CARGI)

Journal Sentinel article: " UWM researchers throw a new wrench into the system" by Rick

Barrett

Published on October 28, 2013. (Interview)

http://www.jsonline.com/business/uwm-researchers-throw-a-new-wrench-into-the-

system-b99130041z1-229631681.html

Guests: N. Campbell-Kyureghyan and J. Doering

“Fresh Air with Mitch Teich” WUWM Radio Program

Episode "Baby <Sleep Pod> Could Prevent Death from Co-Sleeping" First aired on

February 6, 2013. (Interview) http://blitz.nocrawl.www.wuwm.com/post/baby-sleep-pod-

could-prevent-death-co-sleeping

Guests: Ronald Podoll, M.D., Jewish Hospital; Robert R. Jacobs, Ph.D.; and Naira H. Campbell-

Kyureghyan, Ph.D.

“Kentucky Health” TV Program, Episode #404 “Workplace Wellness”

First aired on October 27th, 2008. (Interview)

http://www.ket.org/tvschedules/series.episode.list.php?id=KKHEA

Campbell-Kyureghyan, N.H. “E.ON U.S. Partners with UofL on Research Project” News

Transmission – E. ON U.S. (monthly magazine); Issue 510, Aug 15, 2008: p:2. (interview)

Campbell-Kyureghyan, N.H. “Boost your health in 60 seconds” by Stacey Colino, “All You,” Time

Inc. (National women’s magazine); Issue 1, January 26, 2007: pp:42. (interview)

Campbell-Kyureghyan, N.H. “Have a better seat” by Cheryl Stuck, Today’s Woman, 16 (1), 2006:

pp:16-17. (interview)

http://blog.wuwm.com/post/uwm-snap-tools-team-develop-new-wrench

http://www.jsonline.com/business/uwm-researchers-throw-a-new-wrench-into-the-

http://blitz.nocrawl.www.wuwm.com/post/baby-sleep-pod-

http://www.ket.org/tvschedules/series.episode.list.php?id=KKHEA

of 33

December 2017

OTHER PROFESSIONAL WORK PUBLISHED

Campbell-Kyureghyan, N. H., Ahmed, M. “Train the Trainer Program for Ergonomics and Safety in

Biofuel Power Generation ,” Occupational Safety and Health Administration, U.S. DOL, 2017. [National Distribution, Publisher: OSHA, DOL]

Campbell-Kyureghyan, N. H., Ahmed, M. “Train the Trainer Program for Ergonomics and Safety in Solar

Power Generation,” Occupational Safety and Health Administration, U.S. DOL, 2017. [National Distribution, Publisher: OSHA, DOL]

Campbell-Kyureghyan, N. H., Ahmed, M. “Train the Trainer Program for Ergonomics and Safety in

Wind Power Generation,” Occupational Safety and Health Administration, U.S. DOL, 2017. [National Distribution, Publisher: OSHA, DOL]

Campbell-Kyureghyan, N. H., Ahmed, M. “Safety & Ergonomics Awareness Training and Best

Practices for Biofuel Power Generation” [English/Spanish], Occupational Safety and Health

Administration, U.S. DOL, 2016. [National Distribution, Publisher: OSHA, DOL]


Practices for Solar Power Generation” [English/Spanish], Occupational Safety and Health



Practices for Wind Power Generation” [English/Spanish]. Occupational Safety and Health


Campbell-Kyureghyan, N. H., Beschorner, K., Ahmed, M. “Safety and Ergonomics Awareness

Training and Best Practices for Wind Power Generation Utilities” (English and Spanish),

Occupational Safety and Health Administration, U.S. Department of Labor, 2015. [National

Distribution, Publisher: OSHA, DOL]


Training and Best Practices for Solar Power Generation Utilities” (English and Spanish),




Training and Best Practices for Biofuel Power Generation Utilities” (English and Spanish),




Training and Best Practices for Managers in Solar Power Generation Utilities,” Occupational Safety

and Health Administration, U.S. Department of Labor, 2015. [National Distribution, Publisher:

OSHA, DOL]


Training and Best Practices for Managers in Wind Power Generation Utilities,” Occupational Safety


OSHA, DOL]


Training and Best Practices for Managers in Biofuel Power Generation Utilities,” Occupational Safety


OSHA, DOL]

Campbell-Kyureghyan, N. H., Beschorner, K., Ahmed, M., Cooper, K., Hoppe, E. “Train the

of 33

December 2017

Trainer Program for Ergonomics and Safety in Coal and Hydro Power Generation,” Occupational

Safety and Health Administration, U.S. Department of Labor, 2014. [National Distribution,

Publisher: OSHA, DOL]

Campbell-Kyureghyan, N. H., Ahmed, M. “Ergonomics and Safety Training for Managers in Coal

and Hydro Power Generation,” Occupational Safety and Health Administration, U.S. Department of

Labor, 2013. [National Distribution, Publisher: OSHA, DOL]

Campbell-Kyureghyan, N. H., Beschorner, K., Ahmed, M., Cooper, K., “Ergonomics and Safety

Awareness and Best Practices for Coal and Hydro Power Generation Employees and Contractors,”

Occupational Safety and Health Administration, U.S. Department of Labor, 2013. (English, Spanish)

[National Distribution, Publisher: OSHA, DOL]

Campbell-Kyureghyan, N. H., Beschorner, K. “Train the Trainer Program for Ergonomics and

Safety in Electric Utilities” Occupational Safety and Health Administration, U.S. DOL, 2013. [National


Campbell-Kyureghyan, N. H., Beschorner, K. “Ergonomics and Safety Training for Managers in Electric Utilities” Occupational Safety and Health Administration, U.S. Department of Labor, 2012. [National Distribution, Publisher: OSHA,DOL]

https://www.osha.gov/dte/grant_materials/fy11/sh-22220-11.html

Campbell-Kyureghyan, N. H., Boda, S., Peschong, J., Beschorner, K. “Ergonomics and Safety Awareness and Best Practices for Electric Utilities and Contractors,” Occupational Safety and Health

Administration, U.S. Department of Labor, 2012. (English, Spanish) [National Distribution,

Publisher: OSHA, DOL]


Campbell-Kyureghyan, N. H., Beschorner, K. “Train the Trainer Program for Ergonomics and

Safety in Gas Utilities” Occupational Safety and Health Administration, U.S. DOL, 2012. [National


Campbell-Kyureghyan, N. H., Cooper, K., Beschorner, K. “Ergonomics and Safety Awareness

Training for Gas Utilities and Contractors,” Occupational Safety and Health Administration, U.S.

Department of Labor, 2011. [National Distribution, Publisher: OSHA, DOL]

Campbell-Kyureghyan, N. H., Cooper, K.“Ergonomics and Safety Training for Managers in Gas

Utilities,” Occupational Safety and Health Administration, U.S. Department of Labor, 2011. [National


https://www.osha.gov/dte/grant_materials/fy11/sh-22220-11/Electric_Management_Training.pptx

Campbell-Kyureghyan, N. H. and Cooper, K.“Ergonomics Training in Foundries: Part I,”


Distribution, Publisher: OSHA/DOL]

http://www.osha.gov/dte/grant_materials/fy08/sh-17807-08.html

Campbell-Kyureghyan, N. H. and Cooper, K.“Ergonomics Training in Foundries for Managers:

Part II,” Occupational Safety and Health Administration, U.S. Department of Labor, 2009.

[National Distribution, Publisher: OSHA, DOL]


“IE ~ Orchestrated Flow” - Jointly developed exhibit with the College of Arts and School of Music at

UofL. Intended to recruit under-represented students to engineering. Combination of audio, cinema,

sculpture, and still photography, 3/7/07. [[Media: Audio, Visual, Audience: Public, Venue: UofL]




https://www.osha.gov/dte/grant_materials/fy11/sh-22220-%1f11/Electric_Management_Training.pptx



of 33

December 2017

OTHER SCHOLARLY OUTPUT

29 Technical Reports

34 Training Manuals

189 Conference Presentations

27 Invited Talks

54 Reports of Completed Research

RESEARCH PROJECTS CONDUCTED & GRANTS RECEIVED

Total Funding Received: $29,418,114

Federal Funding:

$2,172,719

External Non-Federal Funding: $647,204

In-Kind Funding: $25,132,370

Internal Funding: $1,465,821

EXTRAMURAL FUNDING

Federal:

Title: Injury and Safety Hazard Prevention in Oil and Gas Production Industry.

Sponsor: US Department of Labor

Period: 10/2017 – 9/2018

Amount: $149,944,000

PI: Dr. Naira Campbell-Kyureghyan

Title: Train-the-Trainer Program for Ergonomic and Safety Hazard Prevention in Green Energy

Power-Generation Sector

Sponsor: DOL, Occupational Health and Safety Administration (OSHA)

Period: 10/2016 – 12/2017

Amount: $140,000 PI: Dr. Naira Campbell-Kyureghyan

Title: SBIR. Phase II: Development of a Biometric Model for Use in Addressing Pelvic Blast Injury (ELVIS) Grant: DHP SBIR Phase II #H2-0044 Sponsor: DOD, US Army/POC Period: 8/2014 – 8/2016 Amount: $999,975 ($144,014 contracted to UWM)

PIs: Dr. Naira Campbell-Kyureghyan (UWM); Dr. Sivanesan Ponniah (Physical Optics Co)

of 33

December 2017

Title: Safety & Ergonomics for Alternative Energy Generation Sector


Period: 10/2013 – 9/2015


Title: Safety & Ergonomics for Small Business Power Generation


Period: 10/2012 – 9/2013


Title: Pilot Grant: Effects of Technique on Slip and Fall Risk During Ladder Climbing

Sponsor: NIOSH/UIC

Period: 7/2012-6/2013

Amount: $20,000

PI: Dr. Kurt Beschorner; (mentor) Dr. Naira Campbell-Kyureghyan

Title: Safety & Ergonomics for Small Business Electric Utilities


Period: 10/2011 – 9/2012

Amount: $153,000


Title: Safety & Ergonomics for Small Business Gas Utility Employees & Contractors


Period: 10/2010 – 9/2011

Amount: $180,000


Title: Ergonomics Training for Managers and Employees in Small Business Foundries


Period: 10/08 – 10/09

Amount: $165,000


Title: Safety and Health Engineering Center: Planning Grant

Sponsor: National Science Foundation (NSF)/ University of Cincinnati (UC), OH

Period: 10/06-9/07

Amount: $68,000 PIs: Dr. Waldemar Karwowski and Dr. Naira Campbell-Kyureghyan

Non-Federal:

Title: Refinement of Hand Fracture Tolerances for Development of Standard for Glove Impact Testing

Sponsor: International Safety Equipment Association (ISEA)

Period: 12/2017 –6/2018 (pending)

Amount: $89,444


of 33

December 2017

Title: Protective Properties of Impact-Resistant Gloves

Sponsor: Ringers Gloves

Period: 11/2016 – 5/2017

Amount: $40,000


Title: Catalyst Grant: New Approach for Diagnosing Early Stage Intervertebral Disc Degeneration

Sponsor: UWM Research Foundation (Bradley Foundation/ Herzfeld Foundation)

Period: 8/2015 – 7/2017

Amount: $41,000


Title: Refinement and Validation of a Glove Impact Testing Protocol for Standard Development: Phase I Sponsor: Ironclad Wear Inc Period: 01/2015-8/2015 Amount: $50,000 PI: Dr. Naira Campbell-Kyureghyan

Title: Force-Deformation Relationships for Athletic Support Tapes Sponsor: Perfect Cross Inc Period: 1/2014 – 12/2014 Amount: $12,680 PI: Dr. Naira Campbell-Kyureghyan

Title: Ergonomic Evaluation of Snap-On Tools

Sponsor: Snap-On Tools Inc

Period: 4/2013 – 10/2014

Amount: $59,734


Title: Evaluation of a Lift-Assist Device for Jackhammers

Sponsor: Gas Technology Institute (GTI)

Period: 11/2012 – 6/2013

Amount: $30,000


Title: Infant Sleep Pod Device

Sponsor: Bradley Foundation/UWM Research Foundation, Catalyst Grant

Period: 8/2012 – 8/2014


Title: Lightweight and Conventional Jackhammer Evaluation

Sponsor: Gas Technology Institute (GTI), Chicago, IL Period:

9/2010-3/2011


of 33

December 2017

Title: Consortium for Advanced Research in Gas Industry (CARGI)

Sponsor: E. ON US, WE Energies, NiSource, GTI

Period: 6/2010-6/2011

Amount: $50,000


Title: Improving the Safety and Ergonomics at EON Facilities Phase III

Sponsor: E.O.N US, Duesseldorf, Germany

Period: 3/2010-3/2011

Amount: $111,985


Title: Determining the Protective Properties of Kong Gloves

Sponsor: ORR Safety Co, Louisville, KY

Period: 10/2009-4/2010

Amount: $35,000


Title: Improving the Safety and Ergonomics at EON Facilities – Phase II


Period: 01/09-11/09

Amount: $57,205


Title: Improving the Safety and Ergonomics at EON Facilities - Addendum to Phase I


Period: 01/09-06/09

Amount: $50,800


Title: Improving the Safety and Ergonomics at EON Facilities – Phase I


Period: 05/08-12/08

Amount: $46,000


Title: Evaluation and Injury Prevention Among Sonographers

Sponsor: UofL Hospital, Ultrasound Facility, Louisville, KY

Period: 05/07 – 03/08


In-Kind:

Title: Automated Manufacturing Belt

Donor: Rockwell Automation

Date: October 2017

Value: ~$100,000

of 33

December 2017

Title: CARGI

Donor: SnapOn Tools, Inc

Date: July 2017

Value: $5,000

Title: CARGI

Donor: Ringers Technologies

Date: May 2017

Value: $6,500

Title: Connected Enterprise Lab

Donor: Rockwell Automation

Date: January 2017

Value: ~$350,000

Title: Logistics and Distribution Scholarship

Donor: FedEx Smart Post

Date: October, 2016

Value: $15,000

Title: PLM for 35 licenses

Donor: Siemens

Date: March, 2016

Value: $24,350,000



Date: October, 2015

Value: $15,000



Date: October, 2014

Value: $15,000

Title: Snap On Complete Tool Set

Donor: Snap On Tools, Inc

Date: August, 2014

Value: $33,570



Date: Sept, 2013

Value: $15,000

Title: CARGI

Donor: GTI

Date: November 2012

Amount: $5,000

of 33

December 2017

Title: CARGI

Donor: WE Energies, NiSource, EON

Date: October 2012

Amount: $45,000

Title: Nonin Medical 7600 Equanox NIRS

Donor: Nonin Medical Inc

Date: September, 2011

Value: $15,300

Title: CARGI

Donor: GTI, WE Energies, NiSource, EON

Date: 2011

Amount: $55,000

Title: Lunar DEXA Scanner System

Donor: GE Healthcare, Madison, WI

Value: $82,000

Date: June, 2010

Title: INVOS Near Infrared System (NIRS)

Donor: Somanetics Inc, Cincinnati, OH

Value: $25,000

Date: November, 2005

Internal Funding:

Title: Tuition Differential Proposal: Gait Analysis and Bio-dynamics Laboratory

Sponsor: UWM/CEAS

Date: 5/2017

Amount: $4,700

Title: Tuition Differential Proposal: Connected Enterprise and Controls of Automated

Manufacturing Systems

Sponsor: UWM/CEAS

Date: 5/2017

Amount: $14,700

Title: Tuition Differential Proposal: Industrial and Manufacturing Engineering Software

Sponsor: UWM/CEAS

Date: 5/2016

Amount: $10,000

Title: Undergraduate Research Grant (SURF)

Sponsor: UWM Office of Undergraduate Research

Period: 5/2015 – 8/2016

Amount: $12,000

of 33

December 2017



Period: 5/2014 – 8/2014

Amount: $9,000

Title: Major Equipment Grant: Micro-CT scanner for Bioengineering Initiative for Testing and

Imaging

Sponsor: UWM Graduate School/Office of the Provost

Date: 4/2014

Amount: $605,000



Period: 9/2013 – 5/2014

Amount: $16,000

Title: Tuition Differential Proposal: Industrial Lumbar Motion Monitor

Sponsor: UWM/CEAS

Date: 5/2013

Amount: $25,000

Title: Undergraduate Research Grant


Period: 9/2012 – 5/2013

Amount: $12,000



Period: 5/2012 – 8/2012

Amount: $9,000

Title: "Bioengineering Initiative for Imaging and Testing"

Sponsor: UWM Foundation/EDA

Date: 5/2012

Amount: $500,000



Period: 09/11 – 05/12

Amount: $6,000


Agency: UWM Office of Undergraduate Research

Period: 05/11 – 08/11

Amount: $5,000

Title: eCertificate in Ergonomics

Sponsor: UWM Seed Funding for New & Refreshed Online Programs– 2010/11

of 33

December 2017

Period: 9/2010-8/2012

Amount: $ 70,021

Title: RGI: Injury Management System for Strategic Reduction of Workplace Injuries

Sponsor: UWM Graduate Schoool

Period: 07/10 – 12/11

Amount: $82,300



Period: 09/10 – 05/11

Amount: $5,000



Period: 05/10 – 08/10

Amount: $4,800



Period: 01/10 – 05/10

Amount: $4,000

Title: Effect of Tablet PC Usage on Musculoskeletal Discomfort and Educational Outcomes

Sponsor: UofL, Speed School of Engineering (SSE)

Period: 06/08 – 06/09

Amount: $10,000

Title: Anatomical Variations as Predisposing Factors for Focal Dystonia in the Hand

Sponsor: University of Louisville, Multidisciplinary Research Grant Program Period:

01/06 - 01/07

Amount: $10,000

Title: Behavior and Damage Criteria during Repetitive Motion of the Human Spine

Sponsor: University of Louisville, Multidisciplinary Research Grant Program and the Department of

Orthopaedic Surgery

Period: 01/06 - 01/07

Amount: $51,300

PATENTS, DISCLOSURES, LICENSES AND STARTUPS:

2017 Apparatus and Method for Physical Load Testing (International Patent

Application No.: PCT/US2017/037427) - pending

2017 Apparatus and Method for Physical Load Testing (U.S. Patent Application

No.: 15/622,421) - pending

2016 “KYUR Innovative Technologies LLC” – New Startup Company

of 33

December 2017

2013 Wrench with an Interchangeable Handle - Executed License (SnapOn Tools)

2012 Wrench with an Interchangeable Handle - Invention Disclosure # IP-1322

2012 Infant Sleep Pod Device - Invention Disclosure # OTT1306 with

J. Doering (PI)

2011 Training Video: Ergonomic and Safety Training for Gas Meter Change-out

Operations- Executed License (Vista Training Inc.) and Copyright # IP-1281

2008 Portable Spine Energy Monitor (PSEM) - Invention Disclosure #08081

2000 Resonant Method for the Cancer Treatment Applications - Invention

Disclosure (OSU)

HONORS AND AWARDS

2017 IEEE GLBC Research Competition 1st and 3rd place awards

2016 Honorable Member of Panel for US DOL, Washington DC, October 20, 2016

2014 Certificate of Excellence, Elsevier Editorial

2014 CEAS Millionaire Club Award, UWM

2013 IEEE Larry Hause Research Competition 1st Place Award

2013 IEEE Larry Hause Research Competition 3rd Place Award

2013 HFES Best IETG Paper Award

2009 1st Place in Poster Competition for the Best Research in SSE, E-Expo, UofL, Louisville,

KY, March 7.

2009 HFES Annual Meeting - Best IETG Paper Award

2007 3rd Place in Poster Competition for the Best Research in IE, E-Expo, University of

Louisville, Louisville, KY, March 3.

2008 1st Place Winner, SE ASB Conference, Birmingham, AL, April 27-29.

2008 2nd Place in Poster Competition for Basic Research, Research Louisville 2008!,

University of Louisville, Louisville, KY, October 24-27.

2006 New Faculty Research Award, Delsys Inc.

2006 1st Place in Poster Competition for Basic Research, Research Louisville 2006!,

University of Louisville, Louisville, KY, October 25-28.

2006 1st Place in Poster Competition for the Best Research Innovation in IE, E-Expo,

University of Louisville, Louisville, KY, March 2.

2006 Second Place Winner, Injury Biomech Symposium, Columbus, OH.

of 33

December 2017

TEACHING

COURSES TAUGHT – Italic indicates newly developed classes

IE 380 Work Design – SU06 - UofL

IE 681 Human Performance - F05, SP06, F06 - UofL

BE 102 Introduction to Bioengineering-Biomechanics - F05 – UofL

EM 681 Management of Human Systems – SU06, SP07 – UofL (Panama)

IE 581 Ergonomic Techniques – F06, F07 – UofL

EM 681 Biomechanics of the Hand – F06 – UofL

IE 693 Biomechanics of the Spine – F06 – UofL

IE/ME 689 Advanced Topics in Occupational Biomechanics – SP07 – UofL

EM 582 Management of Human Systems – SP07, F07, SP08, SP09 – UofL

IE 590-2 Advanced Human Biodynamics – F07 – UofL

IE 589 Anatomy and Physiology for Engineers – F07 – UofL

IE 480 Intro to Ergonomics and Work Physiology – SP08, F08 – UofL

IE 689 Advanced Research Topics in Biomechanics – F08 – UofL

IE 581 Ergonomic Techniques in the Workplace – SP09 – UofL

IE 780 Advanced Ergonomics: Low Back – F09, SP13 – UWM

IE 580 Introduction to Ergonomics – SP10, SP11, F11, 12, 16, 17 – UWM

IE 582 Ergonomic Job Evaluation Techniques –SP11, 12, 14, 18 – UWM

IE 590/890 Research Methods for Engineers – SP15 - UWM

IE 590/890 Connected Enterprise Concepts – F16 - UWM

BME 880 UWM-MU-MCW Bioengineering Seminar Series – F16, Sp 17- UWM

UNDERGRADUATE, GRADUATE AND POST-DOCTORAL STUDENT SUPERVISION

Name Activity Final Year Advising Role

Meredith Johnson PhD 2021 Primary Advisor

John Hackmann MS 2019 Primary Advisor

David Moore MS 2018 Primary Advisor

Thomas Samuel

Madiha Ahmed

PhD

PhD

2018

2018

Primary Advisor

Primary Advisor

- Honorable Mention 2012 CEAS Research Symposium, UWM

- 2nd place winner at ISEA 2017

- Chancellor Award – Spring 2017 and Summer 2017

Arash Razmjoo PostDoc 2017 Mentor

- 2nd place winner at IEEE GLBC PhD 2017

Blake Johnson PhD 2017 Primary Advisor

- UWM Distinguished Grad Student Fellowship Award winner 2014-2015

- CEAS Distinguished Deans Fellowship Award winner 2015-2018

of 33

December 2017

- 1st place winner at IEE GLBC 2017

- Chancellor Award –Summer 2017

Stephanie Bolin MS 2017 Primary Advisor

Yu-Wei Wang(Sam) MS 2017 Primary Advisor

- 1st place winner at IEEE GLBC

- Chancellor Award – Spring 2017 and Summer 2017

Jennifer Paola Garantiva Poveda MS 2017 Secondary Advisor

Fernando Buchanan-Nogueron UG 2017 Research Advisor

Quinn Porter UG 2016 Research Advisor

Kami Hessling UG 2016 Research Advisor

Anna Bostian UG 2016 Research Advisor

Spencer Brown UG 2016 Research Advisor

Amanda Field UG 2016 Research Advisor

Joseph Pliner MS 2016 Primary Advisor

-Winner of Student Start-up Challenge 2015

Maria Weiner MS 2016 Primary Advisor

Daniel Lomo-Tettey MS 2015 Primary Advisor

- AOP Fellowship Award, UWM 2012-2014

Alexa Hernandez UG, MS 2015 Primary Advisor

- 3rd Place Research Poster, UWM 2013

- AOP Fellowship Award 2014-2015

- Academic Excellence Award, UWM 2014

- 2nd place, CEAS Research Symposium, UWM 2014

Erica Pliner MS 2015 Secondary Advisor

-Winner of Student Start-up Challenge 2013


Patrick Loshek UG, MS 2015 Primary Advisor


Jeremy Sosa UG 2014 Research Advisor

Scott Frazier UG 2014 Research Advisor

Trevor Williams MS 2014 Primary Advisor

Blake Johnson MS 2014 Primary Advisor

- 2nd Place CEAS Research Symposium, UWM 2014


- 1st Place Research Competition, IEEE 2013

- Chancellor Award, UWM 2012, 2103

Patrick Dix UG, MS 2014 Primary Advisor

- 3rd Place Research Competition, IEEE, 2013

- Chancellor Award, UWM 2012

of 33

December 2017

Jayashree Arunkumar MS 2014 Secondary Advisor

Mitchell Smith MS 2014 Primary Advisor

Derick Tucker UG 2014 Research Advisor

Joseph Lange UG 2014 Research Advisor

Englebert Schommer UG 2014 Research Advisor

John Peschong MS 2013 Primary Advisor

Timothy Korineck UG 2013 Research Advisor

James Zoromski UG 2013 Research Advisor

Karl Poyner Bachhuber-Beam UG 2013 Research Advisor

Michael Sipos UG 2013 Research Advisor

Teresa Briggs UG 2013 Research Advisor

Sruthi Boda PhD/Post-Doc 2012 Sec/Prim Advisor

- HFES Best Paper Award, 2013

Chelsea Stachowiak UG 2012 Research Advisor

Adam Johnson UG 2012 Research Advisor

Bradley Narlow UG 2012 Research Advisor

Tina Minter MS 2012 Secondary Advisor

David Burnett MS, PhD 2011 Primary Advisor

- 1st Place Paper, Research Louisville, UofL 2006

- Grosscurth PhD Fellowship, UofL 2007

- 3rd Place Poster Competition, E-Expo, UofL 2007

- IE Graduate Student of the Year, UofL 2008

- Best IETG Student Paper Award, HFES Annual Meeting 2009

Madiha Ahmed MS 2011 Primary Advisor

- 1st Place Poster Competition, E-Expo, UofL 2009

- 1st Place Poster Competition, Research Louisville, UofL 2009

- Chancellor Award, UWM 2011

Aishwarya Yalamarty MS 2011 Primary Advisor

Parag Bhoyar PhD 2011 Secondary Advisor

Julia Kar PhD 2011 Secondary Advisor

Patrick Cashman UG 2011 Research Advisor

Vincent Jaskowiak UG 2011 Research Advisor

Sai Vikas Yalla MS, PhD, Post-Doc 2010 Primary Advisor

- 1st Place Paper, Research Louisville, UofL 2006

- 1st Place Poster, E-Expo, UofL 2006

- 2nd Place Poster, Injury Biomechanics Symposium 2006

- Grosscurth PhD Fellowship, UofL, 2006

- IE Graduate Student of the Year, UofL 2007

of 33

December 2017

- 1st Place Winner, SE ASB conference 2008

- 2nd Place Winner, Research Louisville, UofL 2008

Jay Kupelusch PhD 2010 Secondary Advisor

Jeffrey Hogan UG 2010 Research Advisor

Scott Cramer MS 2010 Secondary Advisor

Simone Caston MS 2009 Primary Advisor

- CODRE/Graduate School Diversity Grant, UofL 2009

Varun Varma Jampana MS 2009 Primary Advisor

Rajaganesh Subramamaniam MS 2009 Primary Advisor

Angela Knight MS,PhD 2008 Secondary Advisor

Sarit Bhaticharya MS 2008 Primary Advisor

James Doan PhD 2008 Secondary Advisor

Nathan Johnson PhD 2008 Secondary Advisor

Peng Zhang MS 2008 Primary Advisor

Sheryll Sisson MS 2008 Secondary Advisor

Zdravko Salipur MS 2008 Secondary Advisor

Raymode DeSouza MS 2008 Secondary Advisor

Sandra Cameron MS 2007 Primary Advisor Simone Caston UG 2007 Research Advisor

Tanapun Karunanont PhD 2007 Secondary Advisor

Drew Spector MS 2007 Primary Advisor

Brent Hurst MS 2006 Primary Advisor

- Golden Key Engineering Achievement Award 2006

- Material Handling Education Foundation Scholarship 2006

- JB Speed School of Engineering Outstanding Student 2006

Jim Wimsatt MS 2006 Primary Advisor

Todd Thomerson MS 2006 Primary Advisor

Benjamin Vaughan MS 2006 Secondary Advisor

Kyle Bialczak MS 2006 Secondary Advisor

TEACHING AWARDS

2009 Faculty Favorite Award – University-wide Teaching Award at UofL (from 295 faculty

nominees) http://louisville.edu/delphi/faculty-favorites/2009-awards.html

http://louisville.edu/delphi/faculty-favorites/2009-awards.html

of 33

December 2017

ORGANIZING COLLOQUIA, INSTITUTES, WORKSHOPS, OR OTHER PROGRAMS

• International Educators Conference on Connected Enterprise - Rockwell Automation Partnership

with Universities, Milwaukee, August 2-4, 2017. (organizer)

• 37th IEEE Great Lakes Bioengineering Conference "Enhancing Digital Healthcare: Opportunities

and Challenges,” Milwaukee, April 6-7, 2017. (organizer)

• 36th IEEE Great Lakes Bioengineering Conference "Biomedical Applications of Additive

Manufacturing,” Milwaukee, May 14-15, 2015. (organizer)

• IE/HFES seminar "Enhancing Patient Centered Communication in Primary Care Setting with

Using EHRs,” presented by Dr. Onur Asan, MCW. November 20, 2014. (organizer)

• “Ergonomics Awareness Month at UWM” sessions promoting proper ergonomic practices to the

campus-wide community in conjunction with University Health Services and HFES student

chapter at UWM, October 2013. (faculty mentor and organizer)

• 35th IEEE Great Lakes Bioengineering Conference "Frontiers in Medical Imaging,” Milwaukee,

April 11-12, 2013. (organizer)

• IE seminar: "Nanoparticles: Insights from Simulations" presented by Dr. W. Saidi, November 20,

2013. (organizer)

• IE/HFES seminar: "Falls, a Human Factors Perspective" presented by Dr. R. Cham, December 5,

2013. (Role: organizer)

• CARGI Symposium on “Manual Material Handling,” April 28, 2011. (organizer)

• “Ergonomics in Mining and Utilities,” - CARGI Spring Symposium, May 20, 2010. (organizer)

• “Ergonomics Awareness Month at UWM” sessions promoting proper ergonomic practices to the

campus-wide community in conjunction with University Health Services and HFES student

chapter at UWM, October 19-21, 2010. (faculty mentor and organizer)

• “Slips, Trips, and Falls in Industry,”- CARGI Fall Symposium, November 4, 2010. (organizer)

• Combined UWM (Center for Ergonomics) and American Society of Safety Engineers Wisconsin

Chapter Fall Meeting, November 11, 2010. (organizer)

• CEAS Open House - 2009, 2010, 2011, 2013 - IE Presentation (volunteer)

• Organized an educational outreach session on industrial engineering for K-12 and undecided

engineering students at the College of Engineering & Applied Science at UWM. (2009)

• Organized Several “Ergonomics and Biomechanics” Colloquia and Seminars at UofL, 2005-

2008.

• Developed two “Health Initiative” sessions promoting proper ergonomic practices to the campus-

wide community in conjunction with University Health Services and HFES student chapter at

UofL, 2008. (organizer)

• Developed a session “Think-Ergonomics” for the INSPIRE program (summer engineering

enrichment program for women and minorities) at the School of Engineering at UofL. (2008,

2009)

• Developed an ergonomics training program for ultrasound sonographers. (2008)

of 33

December 2017

• Developed two “Health Initiative” sessions promoting proper ergonomic practices to the campus-

wide community in conjunction with University Health Services and HFES student chapter at

UofL, 2008. (organizer)

• Initiated and organized engineering female-student-faculty round table discussion workshop

series at SSE UofL. (2007-2008)

OTHER TEACHING ACTIVITIES

• Trained over 3000 workers and managers and safety professionals nationwide on various

ergonomics programs that was developed as a product of 12 years of research by the team (2005-

2017)

• Mentored 7 junior faculty at UWM since 2012

• "Think Ergonomics" lecture for ME Senior Design Course (ME 465), Spring/Fall 2011, 2012,

2013, 2014

• Organized numerous educational sessions/demonstrations in the areas of ergonomics and

occupational biomechanics for K-12 students. (2010-2014)

• Organized an educational outreach session on industrial engineering for K-12 and undecided

engineering students at the College of Engineering & Applied Science at UWM. (2009)

• Developed a session “Think-Ergonomics” for the INSPIRE program (summer engineering

enrichment program for women and minorities) at the School of Engineering at UofL. (2008,

2009)

• Initiated and organized engineering female-student-faculty round table discussion series at SSE

UofL. (2007-2008)

• Organized numerous educational sessions/demonstrations in the areas of ergonomics and

occupational biomechanics for K-12 students. (2005-2009)

• Taught internationally (Panama, Germany, Hungary, Israel, Armenia and Taiwan) since

1997.

of 33

December 2017

SERVICE

MEMBERSHIP OR LEADERSHIP IN DEPARTMENT, SCHOOL, COLLEGE, DIVISION,

UNIVERSITY, OR SYSTEM COMMITTEES AND/OR TASK FORCES

2017 Chair, IME Department Lecturer Search and Screen Committee

2017 College (CEAS) Nominations and Awards Committee

2016 -2018 Honorary Degrees Nomination Committee

2014 Chair, IME Department Faculty Search and Screen Committee

2014 Chancellor Search Committee, UWM, member

2013- 2014 CEAS Graduate Program 10-year Review Committee, UWM, member

2013- 15, 2016-pres Department Chair, IME

2013- pres CEAS Workload Policy Workgroup, UWM, member

2013- 2015 CEAS Graduate Program Subcommittee, UWM, member(GFC rep)

2013- 2015 CEAS Curriculum Committee, UWM, member (GFC rep)

2013– 2015 University Graduate Faculty Committee, UWM, member

2013- 2015 University Curriculum and Program Evaluation Committee, UWM

2013 - pres Dept of Industrial Engineering Curriculum Committee – UWM, member

2013- 2015 University SWQ Space Planning Workgroup, UWM, member

2013- 2015 University Research Policy Committee, UWM, chair

2013 - pres CTSI Strategic Planning Committee, UWM, MCW.

2012- 2015 Faculty Senate Subcommittee on the Evaluation of Administrators (SSEA)

2012- pres Bioengineering Program Advisory Board - MSOE, member

2012- 2013 University Research Policy Committee, UWM, member

2012- 2013 UWM Graduate School Research Strategic Planning Committee, member 2011

University “Research Space, Equipment and Critical Support Infra-Structure”

Subcommittee, UWM, member

2011 - 2012 CEAS Strategic Planning Committee, UWM, member

2011 - pres Dept of Industrial Engineering EC – UWM, member

2011 - 2015 Dept of Mechanical Engineering EC – UWM, member

2011 - 2015 Dept of Mechanical Engineering GAC – UWM, member

2011 - 2012 Dept of Industrial Engineering RLP sub-committee – UWM, chair

2010– pres Department of Industrial Engineering ABET Committee – UWM, member

2010– 2012 University Graduate Faculty Committee, UWM, member

2010- 15; 17-present UWM Faculty Senate, senator for the University Division of Professions

2010- 2015 University Graduate Student Fellowship Subcommittee, UWM, member

2010- 2015 Department of Industrial & Manufacturing Engineering Graduate Program

Committee, UWM, member

of 33

December 2017

2009 UofL Faculty Senate

2009– 2010 Department of Industrial & Manufacturing Engineering Graduate Program

Committee, UWM, Chair

2009 UWM Wauwatosa Innovation Park IRC workgroup, member

2009– 2012 Department Curriculum Committee , UWM, member

2008 IE Faculty Search Committee

2007 – 2009 Speed School of Engineering Diversity Committee

2006 – 2009 IE Graduate Admission Committee - UofL - member

2005 – 2009 Graduate School Faculty – University of Louisville (UofL)

2005 – 2009 IE Curriculum Committee – UofL

COORDINATION OF PROGRAMS, DEPARTMENT AND CENTERS

2013-15, 2016-18 Department Chair

2014- pres Founding Director of Bioengineering, Imaging and Testing Lab on Innovation Campus, UWM

2014-2015 10 Year Review Report of IME Undergraduate Program (self-study)

2012-2014 10 Year Review Report of IME Graduate Program (self-study)

2013-2014 HLC accreditation review – passed with excellence

2013-2014 ABET IME program accreditation – passed with no comments

2013-2014 IME Senior Design Course redesign, coordinator

2013-2014 Faculty Tenure and Promotion committee, chair

2012-2014 IME New Faculty hire committee, chair

2013 Established Logistics Scholarship for IME students

2012- 2013 IME Program Report for Higher Learning Committee

12/09-pres Founding Director, Consortium for Advanced Research in Gas Industry UWM

8/07 – 6/09 Director of the Center for Ergonomics, University of Louisville

10/05 – 8/07 Assoc. Director of the Center for Industrial Ergonomics, University of Louisville

INVOLVEMENT IN STUDENT ACTIVITIES

2017 “Be an Engineer” initiatives with freshman and seniors

2016 “Think out of box” panel discussion with the UG students

2014 (Oct) Discussion panel with Freshman in Engineering student team at Discovery

World

2013 (May) "Why Engineering" discussion panel presenter for STEM Discovery Camp

student team

2012-2013 Faculty co-advisor/consultant for BAJA (Formula SAE) team

of 33

December 2017

2009– pres Human Factors and Ergonomics (HFES) Student Chapter at UWM, Faculty

2007 – 2009 Society of Women Engineers Student Chapter, UofL - Faculty Co-Advisor.

2007 – 2008 Faculty co-mentor for Formula One Design Competition Team at UofL

Advisor and Founder

2006 – 2008 Alpha Kappa Sigma Sorority - UofL -Faculty Advisor

2005 – 2009 Human Factors and Ergonomics (HFES) Student Chapter ,UofL -Faculty

Advisor and Founder

2002 –2004 Human Factors and Ergonomics (HFES) Student Chapter, OSU – Co-Founder

and Vice President

MEMBERSHIP AND LEADERSHIP POSITIONS HELD IN A PROFESSIONAL

PROFESSIONAL ORGANIZATION

2016 - pres Multiple ASTM Committees member

2016 - pres ISPRM Member

2014 - pres IEEE member

2013 -2014 International Society of Electromyography and Kinesiology (ISEK) Congress

(Rome, Italy), Organizing Committee member

2012 – 2015 Associate Editor “Journal of Electromyography & Kinesiology”

2012 -pres Great Lakes Bioengineering Conference (GLBC) Organizing C0mmittee

member

2011 - pres ASHRAE TC 2.6 - Sound and Vibration Committee member

2010 Advisory Board for ASB Annual Meeting

2009 - pres Wisconsin Women in Higher Education Leadership (WWHEL)

2008 – pres Editorial Board Member for “International Journal for Computational Vision

and Biomechanics”

2008 – pres Editorial Board Member for “Journal of Electromyography and Kinesiology”

2007 – pres Member, Society of Women in Engineering (SWE)

2006 – pres Member, American Society for Engineering Education (ASEE)

2002- 2015 Member, Human Factors and Ergonomics Society (HFES)

2000 - pres Member, American Society of Biomechanics (ASB)

2001- 2014 Member, International Society of Biomechanics (ISB)

of 33

December 2017

SPECIAL ASSIGNMENTS FOR PROFESSIONAL ORGANIZATIONS, AND/OR

PARTICIPATION AT PROFESSIONAL MEETINGS

2017 Fundraising chair, IEEE Great Lakes Biomedical Conference, Milwaukee, WI

2017 Keynote Address, International Healthcare and Management Conference,

Taipei, Taiwan

2017 Keynote Address, International Glove Association, Phoenix, AZ

2016 Panelist, ISPRM Congress, Tel-Aviv, Israel

2016 Keynote Presentation, Automation Fair, Georgia Tech, Atlanta, GA

2016 Panelist, ISPRM Congress, Tel-Aviv, Israel

2014 Session chair, International Society of Occupational Ergonomics and Safety

Annual Conference, El Paso, TX

2014 Session chair and reviewer, World Congress of International Society of

Electromyography and Kinesiology, Rome, IT.

2013 Session chair, International Society of Occupational Ergonomics and Safety

Annual Conference, Atlanta, GA.

2013- pres Reviewer for “Human Factors and Ergonomics” Journal

2012 Session chair and reviewer, Human Factors and Ergonomics Society

International Ergonomics Conference, Boston, MA

2012 Reviewer and session chair, ASB Annual Meeting, Omaha, NE

2012 -pres Reviewer for Great Lakes Bioengineering Conference (GLBC)

2011 Reviewer and session chair, SEANES International Ergonomics Conference,

Sebu, Philippines.

2011- pres Reviewer for “Journal of the Mechanical Behavior of Biomedical Materials”

Elsevier

2010 Paper reviewer and program committee member ASB Annual Meeting

2010- 2014 Member, American Gas Association (AGA) Ergonomics and Safety Committee

2008 Paper reviewer, American Society of Mechanical Engineers (ASME)

International Design Engineering Technical Conference (IDETC)

2008 Session co-chair and paper reviewer, Human Factors and Ergonomics Society

Annual Meeting

2008 Reviewer, Assistive Technology (AT) Rehabilitation Engineering and Assistive

Technology Society of North America (RESNA)

2007 – pres Reviewer for “Journal of Applied Ergonomics” Elsevier

2006 – 2009 Chair of the Award Committee; Human Factors and Ergonomics Society

(HFES) Annual Meeting

2006 – pres Reviewer for “Journal of Electromyography and Kinesiology” Elsevier

2005 – pres Reviewer for “Medical Engineering and Physics” Journal, Elsevier

of 33

December 2017

COMMUNITY, REGIONAL, STATE, AND NATIONAL ACTIVITIES (volunteer)

Fall 2016 WI Science Festival – in partnership with Rockwell Automation, UWM

Summer 2016 SOAR, Fundraising for Orphans

Fall 2015 WI Science Festival presenter – in partnership with SnapOn, UW

Madison Spr 2015 Engineering Forum participant, UW Madison

Spr 2014 Judge for UWM and UW System Undergraduate Research

Symposium Spr 2014 Judge for UWM CEAS Research Competition, Milwaukee, WI

Spr & Fall 2013 Judge for BioEngineering Department Capstone Design project

Competitions at MSOE, Milwaukee, WI

Spring 2012 Judge for Science Fair at Nicolet HS, Milwaukee, WI

2011, 2012, 2013 Judge for MSOE Research Symposium, Milwaukee, WI

2007 – 2008 Judge for Junior Science and Humanities Symposium

2005 – 2008 Judge for Science Fair Brandeis Elementary School Team

2005 – 2016 Chess Coach for various K-12 Schools

INDUSTRY PARTNERS (abbreviated list)

Rockwell Automation

Siemens

Ford Motor Co

GE Appliance Park

H&B/Bionic Glove

Empapst Co

Orr Safety Co

LG&E and KU

NiSource

Columbia Gas (OH)

Herman Miller

Minnesota Power

Black Hills Energy

Madison Gas & Electric

GE Healthcare

Physical Optics Corporation

Alliant Energy

FedEx

Snap On Tools

WE Energies

Exxon Mobil

Midwest Renewable Energy Association (MREA)

Midwest Energy Association (MEA)

Gas Technology Institute (GTI)

American Foundry Society (AFS)

American Gas Association (AGA)

WI Underground Construction Assoc (WUCA)

National Utility Contractors Association (NUCA)

International Safety Equipment association (ISEA)

Ringers Gloves

Harley Davidson

Ironclad Wear Inc

Vista Training Inc.

Chevron

Over 200 industry partners (CARGI)

curriculum vitae naira helen campbell-kyureghyan, ph.d. … · 2018-01-17 · page 1 of 33 december...

Documents