curriculum vitae...faculty of civil engineering vi) august 2016 – gold medal for 2016...
TRANSCRIPT
1
CURRICULUM VITAE
PERSONAL DETAILS
Name : Shek Poi Ngian
Nationality : Malaysian Tel : (Mobile) : 0127980928 (Office): 075531627
(Fax): 075576841 E-mail : [email protected], [email protected] Website : http://people.utm.my/shekpoingian/ Expertise : Steel connection, steel and concrete composite structures, Interlocking
brick system ACADEMIC QUALIFICATIONS
Year : 2009 Doctor of Philosophy in Civil Engineering (Structure) Universiti Teknologi Malaysia Year : 2005 Bachelor in Civil Engineering Universiti Teknologi Malaysia AWARD AND HONORS RECEIVED
Date : Awards/Achievement
i) October 2018 – Bronze Award for 20th Industrial Art and Technology Exhibition (INATEX 2018)
ii) September 2018 – Silver Award in New Academia Learning Innovation for Education 4.0, NALI 2018 Exhibition & Competition.
iii) February 2018 – Gold Medal for Invention & Innovation Awards 2018, Malaysia Technology Expo 2018 (MTE 2018)
iv) November 2017 – Bronze award for 19th Industrial Art and Technology Exhibition (INATEX 2017)
v) July 2017 – Special award for SWA Accreditation Faculty of Civil Engineering
vi) August 2016 – Gold Medal for 2016 International Invention Innovation Competition in Canada, iCAN
vii) May 2016 – Gold Medal for 27th International Invention, Innovation & Technology Exhibition 2016 (ITEX)
2
viii) February 2016 – Silver Medal for Malaysia Technology Expo and Invention & Innovation Competition 2016 (MTE 2016)
ix) November 2015 – Silver Medal for 17th Industrial Art and Technology Exhibition (INATEX) 2015
x) February 2013 - Bronze Award for 12th Malaysia Technology Expo and Invention & Innovation Competition 2013 (MTE 2013)
xi) November 2012 – Best Researcher – Research Grant in Construction Research Alliance
xii) October 2012 – Silver Award for 14th Industrial Art and Technology Exhibition (INATEX) 2012
xiii) October 2012 – “Anugerah Perkhidmatan Cemerlang” sempena Majlis Anugerah Kecemerlangan & Penghargaan (Citra Karisma)
xiv) November 2011 – Bronze Award for 13th Industrial Art and Technology Exhibition (INATEX 2011)
PROFESSIONAL EXPERIENCE
Date : Positions/Employer
i) 16 Mac 2010 – present – Senior Lecturer, Universiti Teknologi Malaysia
ii) 1 Nov 2012 – 31 Oct 2013 – Design Engineer, Perunding DMMT
JOURNAL EDITOR/EDITORIAL/ADVISORY PANEL
i) Editorial Board Member, Jurnal Teknologi (Sciences & Engineering) Vol 74, No 4: Special Issue on Advances in Sustainable Structure, Construction, Building and Urban Research.
ii) Editorial Board Member, Jurnal Teknologi (Sciences & Engineering) Vol 77, No 16: Research Advances in Sustainable Structure, Material and Construction
3
ADMINISTRATIVE EXPERIENCE
Faculty Level
Date : Positions/Employer
i) July 2018 – Coordinator, for Engineering Doctorate
(Technology and Construction Management)
Programme SKA (semester I & II 2018/2019)
ii) October 2018 – member for Emergency Response
Team School of Civil Engineering, Faculty of
Engineering.
iii) October 2018 – committee member (sponsorship) for
international UTM Bridge model competition
(UTMBridge 2019)
iv) September 2018 – committee member for UTM Civil
Engineering Alumni Dinner (UTM-CEAD) 2019
v) June 2018 – supervisor for Industrial Training SKA
session 2017/2018.
vi) March 2018 – committee member for Academic
Postgraduate Programme SKA.
vii) March 2018 – committee member for Curriculum And
Sillybus Postgraduate Programme SKA.
viii) March 2018 – Assistant Chairman for PhD VIVA
ix) January 2018 – Coordinator, for Engineering
Doctorate (Technology and Construction
Management) Programme SKA (semester I & II
2017/2018)
x) December 2017 – member for Strategic Planning SKA
2018
xi) October 2017 – committee member Study Circle (Non
Muslim) FKA
xii) October 2017 – Committee member for ISO
9001:2008 FKA
xiii) July 2017 – Coordinator, for Engineering Doctorate
(Technology and Construction Management)
Programme FKA (semester I & II 2016/2017)
xiv) July 2016 – Coordinator, for Engineering Doctorate
(Technology and Construction Management)
Programme FKA (semester I & II 2015/2016)
xv) Mac 2016 – Committee member for ISO 9001:2008
FKA
xvi) January 2016 – Committee member for
Jawatankuasa Akademik (JKAPG) Postgraduate FKA
4
xvii) May 2016 – committee member (sponsorship) for
international UTM Bridge model competition
(UTMBridge 2017)
xviii) July 2016 – Editor of book chapter on “Structural
Behaviour of Innovative Constructional Steel”
xix) February 2016 – committee member Study Circle
(Non Muslim) FKA
xx) May 2016 – committee member for seminar on “Non-
destructive evaluation (NDE) for building condition
assessment”
xxi) November 2016 – secretariat for interactive course on
non-destructive evaluation (NDE) for building
condition assessment (NDE 2016)
xxii) April 2015 - committee member (sponsorship) for
UTM Bridge 2015 model competition (UTMBridge
2015)
xxiii) March 2015 – task force head on “strengthen UTM
alumni network”
xxiv) March 2015 – task force head on “to enforce all
research and taught course PG students to publish”
xxv) September 2012 – committee member for Joint
Conference GEOTROPIKA & ICONBUILD :
GEOCON 2013
xxvi) September 2014 – coordinator of strategic planning
workshop focus group for Construction Research
Alliance 2014
xxvii) March 2014 – Reviewer for Research Seminar Civil
Engineering (SEPKA 2014)
xxviii) March 2012 – Judge to the event of Mini Tower
Competition in conjuction with UTMOST Imagination
2012.
xxix) January 2012 – committee member for Anual Report
FKA
xxx) February 2012 – committee member for bridge model
competition 2012
xxxi) October 2012 – fasilitator for research methodology
course semester 1 session 2012/2013.
xxxii) September 2011 – student advisor for Asia Pacific
Universities Build & Break Competition 2011
xxxiii) March 2011 – Research Follow in Steel Technology
Centre (STC)
xxxiv) August 2010 – committee member for coordination of
Adjunct Professor Department of Structures and
Materials, Dato’ Seri Ir. Dr. Judin bin Abdul Karim
5
xxxv) October 2010 – present - evaluator for PhD first stage
presentation
xxxvi) October 2010 – present - evaluator for MEng first
stage presentation
University Level
Date : Positions/Committe
i) November 2018 – Member of Team MIZANHOME for
Solar Decathlon Middle East 2018 Competition,
Dubai.
ii) August 2018 – technical evaluator for tender “Solar
house 6.825KWP rooftop solar photovoltaic system
for Solar Decathlon Middle East, Dubai.”
iii) January 2018 – supervision for CSR program “Projek
Perintis My Beautiful New Home (MYBNHOME) at
Slim River, Perak
iv) December 2017 – supervision for CSR program
“Projek Perintis My Beautiful New Home
(MYBNHOME) at Slim River, Perak
v) May 2017 - Technical evaluator proposal GUP 2018/1
niche area Innovative Engineering
vi) January 2017 – Structural engineer for Solar
Decathlon Middle East (SDME 2018), Dubai
vii) May 2016 – Technical evaluator proposal GUP
2016/1 niche area Innovative Engineering
viii) December 2016 – secretariat for the operning
ceremony of UTM Eco-Home
ix) December 2016 – Structural engineer of UTM Eco-
Home
x) December 2015 – editorial board for Jurnal Teknologi
Special Issue: Research Advances in Sustainable
Structure, Material and Construction
xi) October 2015 – Technical evaluator proposal GUP
2015/3 niche area Innovative Engineering
xii) June 2015 – committee member for tender evaluation
of UTM Eco-Home Project
xiii) May 2014 – editorial board Jurnal Teknologi – Special
Edition (Construction Structure and Material)
xiv) March 2014 – Researcher Project Solar Home UTM
xv) March 2012 – Member of Team Solar Home UTM for
Solar Decathlon China 2013 Competition.
6
NATIONAL COMMITTEE
i) Technical committee on Steel for Structural Purposes (TC/P/3), SIRIM
INTERNATIONAL APPOINTMENT/COMMITTEE
i) Reviewer for the 10th Asia Pacific Structural Engineering and Construction
Conference (APSEC 2018), 13 – 15 November 2018, Langkawi, Malaysia.
ii) Invited speaker for public lectures, supervision for experimental testing, evaluator
for PhD presentation at Universitas Sriwijaya, 16 – 18 October 2018.
iii) Moderator for The Third International Conference on Construction and Building
Engineering (ICONBUILD 2017): 14 – 17 August 2017, Palembang, Inodonesia.
iv) Reviewer for The Third International Conference on Construction and Building
Engineering (ICONBUILD 2017): 14 – 17 August 2017, Palembang, Inodonesia.
v) Scientific reviewer for the special issue on Global Congress on Construction,
Material and Structural Engineering 2017 (GCOMSE 2017), Malaysian
Construction Research Journal (MCRJ)
vi) Invited speaker for public lectures, supervision for experimental testing, evaluator
for PhD presentation at Universitas Sriwijaya, 10 – 13 February 2017.
vii) International Scientific Commmittee and Technical Committee Member for The
Third International Conference on Construction and Building Engineering
(ICONBUILD 2017): 14 – 17 August 2017, Palembang, Inodonesia.
viii) Reviewer for special issues of Pertanika Journal of Science & Technology (JST)
– Advances in Science and Technology Research.
ix) Reviewer for Jurnal Teknologi (Science and Engineering)
x) Reviewer for KSCE Journal of Civil Engineering
xi) Assistant secretary (UTM Organizing Committee) of 2nd International
Conference on Construction and Building Engineering (ICONBUILD 2015)
xii) International Scientific Committee and Technical Committee Member (Section
Head – Structures) for the 2nd International Conference on Construction and
Building Engineering 2015 (ICONBUILD 2015)
xiii) Moderator for the 2nd International Conference on Construction and Building
Engineering 2015 (ICONBUILD 2015)
xiv) Reviewer for International Conference on Advanced Science, Engineering and
Technology (ICASET) 2015: Advanced Science, Technology and Engineering:
Lighting the Way Towards Sustainable Future
xv) Reviewer for 2nd International Conference on Construction and Building
Engineering (ICONBUILD 2015)
xvi) Committee member of The 3rd Technical Conference on Hydraulic Engineering
(CHE 2014)
xvii) Reviewer Jurnal Teknologi – Special Issue (Sustainability and Construction
Management)
xviii) Session Chairman for the 1st International Conference on The Science &
Engineering of Materials (ICOSEM 2013)
7
xix) Chairperson in the event of Joint Conference GEOTROPIKA & ICONBUILD:
GEOCON 2013.
xx) Reviewer for the 4th International Graduate Conference on Engineering, Science
and Humanities (IGCESH 2013)
xxi) Reviewer for Malaysian Journal of Civil Engineering (MJCE)
PROFESSIONAL MEMBERSHIP AND RECOGNITION
i) Member, Institute Engineer Malaysia, Membership No.: G27125, (2007 –
present) ii) Member, Malaysian Society for Engineering & Technology (mSeT),
Membership No: 00568, (2010 – present) iii) Member, Malaysian Structural Steel Association (MSSA), Membership No: OM-
1031, (2014 – present) iv) Member, Society of Engineering Education Malaysia (SEEM), Membership No:
P0138, (2012 – present)
TEACHING EXPERIENCES
UNDERGRADUATE COURSES TAUGHT
Semester Sem Subject
Code
Subject Credit
Hour
No. of
Students
2010/2011 1 SAB2223 Mekanik Bahan Dan
Struktur 3 53
2010/2011 2 SAB4223 Analisis Struktur 3 65
2010/2011 2 SAB3233 Rekabentuk Struktur
Keluli & Kayu 3 52
2011/2012 1 SAB2223 Mekanik Bahan Dan
Struktur 3 53
2011/2012 2 SAB4223 Analisis Struktur 3 48
2012/2013 1 SKAA1213 Mekanik Kejuruteraan 3 39
2012/2013 2 SAB3233 Rekabentuk Struktur
Keluli & Kayu 3 57
2013/2014 1 SKAA2012 Makmal Kejuruteraan
Awam 1 2 81
2013/2014 1 SKAA2223 Mekanik Bahan Dan
Struktur 3 48
2013/2014 2 SAB3233 Rekabentuk Struktur
Keluli & Kayu 3 3
2013/2014 2 SKAA3233 Rekabentuk Struktur
Keluli & Kayu 3 46
2014/2015 1 SKAA3233 Rekabentuk Struktur
Keluli & Kayu 3 44
8
2014/2015 1 SKAA2012 Makmal Kejuruteraan
Awam 1 2 62
2014/2015 1 SAB3233 Rekabentuk Struktur
Keluli & Kayu 3 1
2014/2015 1 SAB1042 Makmal Kejuruteraan
Awam 1 2 2
2014/2015 2 SKAA2012 Makmal Kejuruteraan
Awam 1 2 85
2014/2015 2 SAB3233 Rekabentuk Struktur
Keluli & Kayu 3 1
2014/2015 2 SKAA3233 Rekabentuk Struktur
Keluli & Kayu 3 40
2015/2016 1 SKAA2012 Makmal Kejuruteraan
Awam 1 2 35
2015/2016 1 SKAA3233 Rekabentuk Struktur
Keluli & Kayu 3 47
2015/2016 2 SKAA2012 Makmal Kejuruteraan
Awam 1 2 33
2015/2016 2 SKAA3233 Rekabentuk Struktur
Keluli & Kayu 3 40
2016/2017 1 SKAA2012 Makmal Kejuruteraan
Awam 1 2 33
2016/2017 1 SKAA3233 Rekabentuk Struktur
Keluli & Kayu 3 36
2016/2017 2 SKAA3233 Rekabentuk Struktur
Keluli & Kayu 3 35
2016/2017 2 SKAA2012 Makmal Kejuruteraan
Awam 1 2 32
2017/2018 1 SKAA3233 Rekabentuk Struktur
Keluli & Kayu 3 49
2017/2018 2 SKAA3233 Rekabentuk Struktur
Keluli & Kayu 3 53
2017/2018 2 SKAA3012 Makmal Kejuruteraan
Awam 2 2 29
2018/2019 1 SKAA3012 Makmal Kejuruteraan
Awam 2 2 26
2018/2019 1 SKAA3233 Rekabentuk Struktur
Keluli & Kayu 3 22
2018/2019 1 SKAA2012 Makmal Kejuruteraan
Awam 1 2 52
Total 85 1302
9
RESEARCH EXPERIENCES
RESEARCH PROJECT UNDERTAKEN Date : Project Leader/Project Member
i) Project Leader, Development of Lightweight Foam
Concrete for Structural Application (VOT18H02)
Research University Grant (GUP Tier 1). Budget
approved RM40,000. Project duration: 1/7/2017 –
30/6/2019
ii) Project Leader, “Fire Resistance of Interlocking Brick
Column under Normal Working Load (VOT03G60)”
Flagship Grant (RUG of UTM). Budget approved
RM50,000. Project duration:15/09/2016 - 14/09/2018
iii) Project Leader, “Smart Lightweight Innovative
Modular Panel System (Slim) Using Cold-Formed
Steel Section (VOT11H32)” Research University
Grant (GUP Tier 1). Budget approved RM50,000.
Project duration: 15/11/2015 - 14/11/2017
iv) Project Leader, “Development of Partial Strength
Connection for Cruciform Column Section in Low
Rise Structures (VOT06H59)” Research University
Grant (GUP Tier 1). Budget approved RM45,000.
Project duration: 1/4/2014 – 30/9/2015
v) Project Leader, “Development of New Technologies
for Interlocking Brick Block Construction (VOT
03H77)” Research University Grant (GUP Tier 1).
Budget approved RM140,000. Project duration:
1/12/2012 – 30/12/2014.
vi) Project Leader, “Analytical Study of Blind Bolted
Connections to Structural Hollow Sections (VOT
00J18)” University Grant (GUP Tier 2). Budget
approved RM40,000. Project duration: 1/4/11 –
31/3/12.
vii) Project Leader, “Parametric Study of Cruciform
Column Sections in Multi-storey Un-braced Steel
Frame Design (VOT 77966)” UTM Short Term Grant.
Budget approved RM20,000. Project duration: 1/8/10
– 31/7/11.
viii) Project Member, HIR 7.2: Thermal Properties and
Behavior of Effective Microorganisms (Em) Concrete.
University Grant (HIR). Approved budget RM75,000
(2018).
10
ix) Project Member, A Study on The Use of Nano
Materials and Microorganism For Sustainable And
Maintenance Free Concrete. University Grant (COE).
Approved budget RM50,000 (2018).
x) Project Member, Performance of Rubberized
Pozzolanic Concrete Filled Hollow Steel Column
Subjected to Cyclic Loadings. University Grant (GUP
Tier 1). Budget approved RM37,600 (2017).
xi) Project Member, Flexural Behaviour Of Innovative
Cold-Formed Encased Composite Beam. University
Grant (GUP Tier 2). Budget approved RM20,000
(2017).
xii) Project Member, Heutagogy Framework for
Structural Steel Design in Civil Engineering
Curriculum. University Grant (GUP Tier 1). Budget
approved RM40,000 (2017).
xiii) Project Member, Right Technology to Power
Affordable Housing. University Grant (GUP Tier 1).
Budget approved RM40,000 (2017).
xiv) Project Member, Sustainable Concrete Performance
Evaluation for Climate Change Effect in Asia Region.
Matching Grant (RUG of UTM). Budget approved
RM150,000 (2016).
xv) Project Member, Prediction Model on Hydration
Temperature of Palm Oil Fuel Ash Concrete using
Advanced Software. Matching Grant (RUG of UTM).
Budget approved RM150,000 (2016).
xvi) Project Member, Landslides Assessment in Korea
and Malaysia Region with Climite Change. Matching
Grant (RUG of UTM). Budget approved RM150,000
(2016).
xvii) Project Member, Structural Behavior of Composite
Beam used in Self-Compacting Concrete Integrated
with Cold-Formed Steel Section. Matching Grant
(RUG of UTM). Budget approved RM150,000 (2016).
xviii) Project Member, Innovative Modular Pile Cap
System using Cold-formed Steel Section for Building
Foundation. GUP Tier 1 (RUG of UTM). Budget
approved RM150,000. (2016)
xix) Project Member, Maximizing Building Information
Modeling (BIM) Functions in Integrated Project
Delivery System. GUP Tier 1 (RUG of UTM). Budget
approved RM50,000. (2016).
11
xx) Project Member, Development of High Strength
Hollow Interlocking Brick System (HIBS) using Fly
Ash and Volcanic Ash. GUP Tier 1 (RUG of UTM).
Budget approved RM50,000. (2014)
xxi) Project Member, Fast Track Construction of
Composite Floor System with Cold-Formed Steel
Section. GUP Tier 1 (RUG of UTM). Budget
approved RM50,000. (2014)
xxii) Project Member, Geometrical effects of bioinspired
whale flipper's tubercles on hydro turbine blade
performance. GUP Tier 1 (RUG of UTM). Budget
approved RM140,000. (2012)
xxiii) Project Member, Exploring The Interaction of
Composite Beam and Slab for Multi-Storey Frame
with Interlocking Brick System Produced Locally as
Industrialized Building System. GUP Tier 1 (RUG of
UTM). Budget approved RM140,000. (2012)
xxiv) Project Member, Structural Performance on Cold-
formed Steel Joint for House-in-a-Box System. GUP
Tier 2 (RUG of UTM). Budget approved RM35,000.
(2012)
xxv) Project Member, Investigation on Precast Floor
Panel using Lightweight Concrete and Cold-formed
Steel Section. GUP Tier 2 (RUG of UTM). Budget
approved RM40,000 (2011)
xxvi) Project Member, Innovative Construction Using Cold-
Formed Steel Sections For Light Steel Structures For
Industrialised Building System. GUP Tier 1 (RUG of
UTM). Budget approved RM170,000. (2011)
xxvii) Project Member, Analytical Models for Strength of
Composite Joints in Light Steel Framing. GUP Tier 2
(RUG of UTM). Budget approved RM40,000. (2011)
FUNDAMENTAL RESEARCH GRANT SCHEME (FRGS FUND) Date : Project Leader/Project Member
i) Project Leader, Investigative Study of Partial
Strength Connection On Both Axes of Cruciform
Column (CCUB) Section (VOT 4F050) Fundamental
Research Grant Scheme (FRGS 2010/2). Budget
approved RM50,000. Project duration: 1/1/11 –
31/12/12.
ii) Project Member, A Theoretical Model to Enhance
Community Acceptance of Migrant Labour
12
Settlement in Malaysia. FRGS. Approved budget
RM86,200 (2019).
iii) Project Member, Buckling Resistance Factor for
Build-up Cold-Formed Steel Slender Column under
Elevated Temperatures. FRGS 2015. Budget
approved RM70,200.
iv) Project Member, Innovative Construction of Floating
Light-Weight Affodable House Designed for Flood
Resistant. FRGS 2015. Budget approved RM69,400.
v) Project Member, Innovative Design and Technology
for Sustainable Post Disaster Settlement. FRGS
2015. Budget approved RM75,700.
vi) Project Member, Formilated Elementary Strnegth
and Stability Equations for Thin-Walled Behaviour of
Cold-Formed Steel Joints in Rapid Building-in-Box
System (RaBiB). FRGS 2013. Budget approved
RM67,000.
EXPLORATORY RESEARCH GRANT SCHEME (ERGS FUND) Date : Project Leader/Project Member
i) Project Member, Exploration Of Woodpecker's Head
Mechanics For Development Of A New Structural
Impact Resistance. ERGS 2013. Budget approved
RM112,000
CONTRACT RESEARCH PROJECT AWARDED BY Jabatan Kerja Raya Malaysia (JKR) SHRE
Date : Project Leader/Project Member
i) Project Leader, RNP3-Solid Material Diverter
(SOLMAD). Contract Research with JKR SHRE.
Budget approved RM109,000 Project duration:
1/11/2013 – 29/2/2016.
ii) Project Member, RNP2-Hydrokinetic Turbine
Anchoring System (HTAS). Contract Research with
JKR SHRE. Budget approved RM79,000. (2013)
13
CONTRACT RESEARCH PROJECT AWARDED BY MINISTRY OF HIGHER EDUCATION Date : Project Leader/Project Member
i) Project Member, An Innovative Construction and
Production Method of Interlocking Brick System for
Green Building Construction. Translational Research
Grant (Ministry of Education). Budget Approved
RM500,000 (2017).
INTERNATIONAL CONTRACT RESEARCH PROJECT AWARDED Date : Project Leader/Project Member
i) Project Member, Sustainable High-Performance
Materials for Climate Change. Research Grant from
Yonsei University. Budget approved RM150,000
(2016).
ii) Project Member, Structural Behavior of Composite
Connection used in Pre-Cast Concrete Integrated
with Cold-formed Steel Section used in Construction
Industry. Research Grant from Universitas Sriwijaya.
Budget approved RM150,000. (2016)
iii) Project Member, Real Time Monitoring of Geo-
Disaster due to Climate Change. Research Grant
from Yonsei University. Budget approved
RM150,000. (2016)
iv) Project Member, Microstructure and Hydration Model
of POFA Concrete. Research Grant from Hanyang
University. Budget approved RM150,000. (2015)
PATENT GRANTED
i) Mahmood Md Tahir et al., A Prefabricated Pad Footing Foundation Constructed Using Cold-Formed Steel Sections (PI 2008 3336)
PATENT FILED/DISCLOSURE
i) Haryati binti Yaacob et al. Self Assessment Report For Self Accreditation : Master In Engineering Transportation (LY2018006224 Copyright UTM)
ii) Shek Poi Ngian, Shahrin Mohammad, copyright of book chapter “Structural Behaviour of Innovative Constructional Steel” (ISBN 978-983-52-1276-5)
iii) Shek Poi Ngian et al. Wall Frame Type 1 (15-00326-0112 Registered Industrial Design)
iv) Shek Poi Ngian et al. Wall Frame Type 2 (15-00332-0212 Registered Industrial Design)
v) Shek Poi Ngian et al. Wall Frame Type 3 (15-00333-0312 Registered Industrial Design)
14
vi) Shek Poi Ngian et al. Wall Frame Type 4 (15-00334-0412 Registered Industrial Design)
vii) Shek Poi Ngian et al. Wall Frame Type 5 (15-00335-0512 Registered Industrial Design)
viii) Shek Poi Ngian et al. Wall Frame Type 6 (15-00336-0612 Registered Industrial Design)
ix) Shek Poi Ngian et al. Wall Frame Type 7 (15-00337-0712 Registered Industrial Design)
x) Shek Poi Ngian et al. Wall Frame Type 8 (15-00338-0812 Registered Industrial Design)
xi) Shek Poi Ngian et al. Wall Frame Type 9 (15-00339-0912 Registered Industrial Design)
xii) Shek Poi Ngian et al. Wall Frame Type 10 (15-00340-1012 Registered Industrial Design)
xiii) Shek Poi Ngian et al. Wall Frame Type 11 (15-00341-1112 Registered Industrial Design)
xiv) Shek Poi Ngian et al. Wall Frame Type 12 (15-00342-1212 Registered Industrial Design)
xv) Shek Poi Ngian, Arizu Sulaiman, Mohd Yunus Ishak. Teaching Material for SAB2223 Mechanics of Material & Structures (Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License) (Copyright for OpenCourseware Universiti Teknologi Malaysia)
xvi) Shek Poi Ngian et al. New Concept of Cruciform Column Steel Sections Formed using Universal Beam (Copyright Universiti Teknologi Malaysia)
xvii) Shek Poi Ngian et al. Retrofitted Flush End-Plate Connection with Built-Up Hybrid Beam Section (Copyright Universiti Teknologi Malaysia)
xviii) Shek Poi Ngian et al. Retrofitted Extended End-Plate Connection with Built-Up Hybrid Beam Section (Copyright Universiti Teknologi Malaysia)
xix) Tan Cher Siang et al. Prefabricated Connector (MY 10-00837-0105 Industrial Design)
xx) Tan Cher Siang et al. Prefabricated Connector (MY 10-00838-0205 Industrial Design)
xxi) Tan Cher Siang et al. Prefabricated Connector (MY 10-00839-0305 Industrial Design)
xxii) Tan Cher Siang et al. Prefabricated Connector (MY 10-00840-0405 Industrial Design)
xxiii) Tan Cher Siang et al. Prefabricated Connector (MY 10-00841-0505 Industrial Design)
15
SUPERVISION
PhD Student
Year No. Name Status Title Roles of
Supervision
2012 1 Tan Boon Kai Ongoing
Behavior Of Beam To
Column Connections With
Double Channelcold Formed
Steel Sections
Main
Supervisor
2012 2 Woon Chin
Peow Ongoing
Engineering Properties Of
Bio-Inspired Mortar Using
Seashell
Main
Supervisor
2019 3 Mu Ker Shin Graduated
Geometrical Effects Of Bio-
Inspired Whale Flipper
Tubercles On Hydro Turbine
Blade Performance
Main
Supervisor
2019 4 Tan Boon
Cheik Graduated
Moment Rotation Behaviour Of End-Plate Connection Using Cruciform Column Section
Main
Supervisor
2017 5
NURIZATY
BINTI
ZUHAN
Ongoing
Performances of Pozzolanic
Concrete Filled Steel Hollow
Short Column Subject to Fire
Loading
Co-Supervisor
2017 6 CHAI TECK
JUNG Ongoing
Prefabricated Deployable
Modular Cold-Formed Steel
Building
Co-Supervisor
2016 7 TAN HEAN
SEONG Ongoing
Co-Supervisor
2015 8 EDRIZAL Ongoing Co-Supervisor
2015 9 RAHMAT BIN
ALI FIARDI Ongoing
Co-Supervisor
2019 10 Bishir Kado Graduated
Behaviour Of Lightweight
Foam Concrete Filled Steel
Tube Column Under Fire
Co-Supervisor
2015 11 Lee Yeong
Huei Graduated
Performance Of Light Steel
Framing With Bolted Top-
Seat Flange Cleat
Connection
Co-Supervisor
2015 12 Lee Yee Ling Graduated
Structural Behaviour Of Slab
Panel System With
Embedded Cold-Formed
Steel Skeletal Frame
Co-Supervisor
16
MSc. Student
Year No. Name Status Title Type Roles of
Supervision
2016 1 Chin Hap
Boon Ongoing
Compression
Resistance Factor of
Interlocking Brick
Column under
Elevated
Temperatures
Research Main
Supervisor
2016 2 Gan Hong
Wei Graduated
Economic And
Structural
Performance Of
Cruciform Column
Section With End-
Plate Connection.
Research Main
Supervisor
2017 3
Tenku
Firdaus bin
Tuan Lah
Graduated
Stress Analysis Of
Solid Material
Diverter Subject To
Impact Collision With
Respect To Angle
Variation
Research Main
Supervisor
2013 4
Joma
Hamed
Mohamed
Omer
Graduated
Analytical And
Numerical Modeling
Of Flush End-Plate
Connection System
With Built-Up Hybrid
Beam
Research Co-
Supervisor
2016 5 Tee Chin
Wee Graduated
Behaviour Of An
Innovative
Connection Used In
Steel Storage
Racking Systems
Research Co-
Supervisor
2014 6
Siti Hajjar
binti Mohd
Salleh
Ongoing
2014 -
2017
Economic Aspect Of
Interlocking Block
System In Ibs
(Industrilized Building
System)
Research Co-
Supervisor
2017 7 Jibeh bin
Gonolon Graduated
Hydro-Response Of
Grid-Like Floating
Structure Subjected
To A Mono-
Directional Flow
Research Co-
Supervisor
2012 8 Tang Xue Graduated Sensitivity Study of
Blind Bolted End-
Taught
Course
Main
Supervisor
17
Plate Connection on
Structural Hollow
Section
2013 9 Lau Hui Hie Graduated
Economic Aspect of
Square Hollow
Section (SHS) in the
Design of Multi-
Storey Unbraced
Steel Frame
Taught
Course
Main
Supervisor
2014 10 Seah Ivy Graduated
Parametric Study of
Blind Bolted End-
Plate Connection on
Structural Square
Hollow Section
Taught
Course
Main
Supervisor
2015 11
Nurul Ain
Nabilah
binti Mamat
Graduated
Parametric Study of
Cross-Section
Capacity of
Interlocking Block
Column
Taught
Course
Main
Supervisor
2017 12 Low Jun
Xiu Graduated
Experimental
Investigation on
Lightweight
Composite Slab
System with Hollow
Box Beam for Flood
Resistant
Taught
Course
Main
Supervisor
2017 13 Law Chin
Yong Graduated
Performance and
Applications of
Lightweight Foamed
Concrete with
Various Density
Taught
Course
Main
Supervisor
2017 14 Koo Ting
Choong Graduated
Structural Behaviour
of Pre-Fabricated
Composite Pad
Footig Foundation
using Cold-Formed
Steel of Lipped
Channel Sections
Taught
Course
Co-
Supervisor
18
Final Year Project
Year No. Name Status Title Roles of
Supervision
2012
1 Tan Boon
Cheik Graduated
Analytical Study Of End-Plate
Connection On Cruciform Column
Section
Main
Supervisor
2 Lim Chia
Wei Graduated
Experimental Investigation Of Flush
End-Plate Connection Of Cruciform
Column Section
Main
Supervisor
3 Philip Heng
Jin We Graduated
Experimental Investigation Of
Extended End-Plate Connection
On Cruciform Column Section
Main
Supervisor
4
Noor Aliff
bin
Zainuddin
Graduated
Comparison Of Multi-Storey Steel
Frames Analysis Using Wind
Moment Method And Stiffness
Method
Main
Supervisor
2013
5
Chan
Chyun
Sheng
Graduated
Analytical Study of Blind Bolted
End-Plate Connection on Structural
Hollow Section using the
Component Method
Main
Supervisor
6 Chee Wing
Sam Graduated
Experimental Investigation of Blind
Bolted Extended End-Plate
Connection on Square Hollow
Section
Main
Supervisor
7 Gan Bee
Huay Graduated
Finite Element Analysis of Blind
Bolted Extended End-Plate
Connection to Square Hollow
Section using ANSYS
Main
Supervisor
8 Sia Pik
Tung Graduated
Experimental Investigation of Blind
Bolted Flush End-Plate Connection
on Structural Hollow Section
Main
Supervisor
9 Chong Shin
Yee Graduated
Finite Element Analysis of Blind
Bolted Flush End-Plate Connection
on Square Hollow Section using
ANSYS
Main
Supervisor
2014
10 Wong Lit
Choong Graduated
Experimental Investigation of Short
Interlocking Brick Column using
Mortar Filler and Different
Reinforcement Bar Size
Main
Supervisor
11 Loh Tat Eu Graduated
Experimental Investigation on Short
Interlocking Block Column with
Concrete as Filler
Main
Supervisor
19
12 Leong June
Kwok Graduated
Experimental Investigation on Short
Interlocking Block Column using
Cement Mortar as Filler Material
Main
Supervisor
13 Choi Wee
Lim Graduated
Experimental Investigation On
Short Interlocking Block Column
With Cementitious Grout As Filler
Main
Supervisor
2015
14 Lim Jin
Sheng Graduated
Compression Capacity of Double
Channel Cold-Formed Steel
Column Section
Main
Supervisor
15 Alvin Lim
Wei Hoong Graduated
Structural Behavior of End-Plate
Connections to Cruciform Column
Section under Monotonic Loading
Main
Supervisor
16 Law Chin
Yong Graduated
Experimental Investigation on End-
Plate Connection with Build-Up
Beam Section
Main
Supervisor
17 Tan Wee
Jet Graduated
Economic Aspects of Cruciform
Column used in the Design of
Multi-Storey Unbraced Steel Frame
Co-
Supervisor
2016
18 Tang Siow
Ting Graduated
Structural Behavior of Lightweight
Modular Wall Panel with Various
Stud Thickness
Main
Supervisor
19
Raymond
Ling Toh
Siung
Graduated
Structural Behavior of Lightweight
Modular Wall Panel with Various
Wall Thickness
Main
Supervisor
2017
20 Nurizaty
binti Zuhan Graduated
Section Properties of Cold-Formed
Steel Section with Various
Thickness
Main
Supervisor
21 Lim Teck
Thong Graduated
Structural Behaviour of Lightweight
Modular Wall Panel under
Combined Gravity and Lateral
Loading
Main
Supervisor
22
Nur Adilah
binti Mohd
Idrus
Graduated
Strucrtural Behaviour of
Prefabricated Pad Footing
Designed using Cold-Formed Steel
Lipped Channel
Co-
Supervisor
23 Yew Zhi
Hao Graduated
Experimental Investigation of Long
Interlocking Brick Column
Subjected to Eccentric Load
Co-
Supervisor
2018 24
Nur Asyiqin
binti Saiful
Azmi
Graduated
Experimental Investigation On
Compression Resistance Of
Short Upright Section For Storage
Racking System
Co-
Supervisor
20
25 Wong Sui
Hieng Graduated
Compressive Strength Of
Lightweight Foamed Concrete With
Various Density
Co-
Supervisor
26
Nur Afiza
Izzati binti
Ahmad
Graduated
Experimental Investigation On
Slender Upright For Storage
Racking System With Different
Thickness
Co-
Supervisor
27 Nurdini binti
Zulkepli Graduated
Experimental Investigation On
Slender Upright For Storage
Racking System With Different
Depth of Web
Co-
Supervisor
28
Farah
Annisa binti
Mohd
Fauzli
Graduated
Comparison Of Compression
Resistance Between Channel And
Lipped Channel Steel Section Of
Various Section Thickness
Main
Supervisor
29
Amirah
Nabihah
binti Ismail
Graduated
Comparison Of Cross Section
Resistance And Buckling
Resistance Between C Section And
Lipped C Section Of Various
Section Depth
Main
Supervisor
30 Ivan Vun
Kai Wen Graduated
Compression Resistance Of Interlocking Brick Column Under Elevated Temperature
Main
Supervisor
21
POSTGRADUATE EXAMINATION /VIVA
UTM STUDENTS/VIVA
i) Co-Chairman to the PhD Viva Panels for Hadi Sarvari ii) Co-Chairman to the PhD Viva Panels for Hamed Ganjbakhsh iii) Co-Chairman to the PhD Viva Panels for Yip Chun Chieh iv) Co-Chairman to the PhD Viva Panels for Seyed Esmaeil Mohammadyan
Yasouj v) Co-Chairman to the PhD Viva Panels for Goh Lyn Dee vi) Co-Chairman to the PhD Viva Panels for Behrouz Gordan vii) Co-Chairman to the PhD Viva Panels for Elnaz Talebi viii) Co-Chairman to the PhD Viva Panels for Saleh Omar Ahmed Bamaga ix) Co-Chairman to the PhD Viva Panels for Talal M H F Alhajri
PUBLICATIONS AND PAPER PRESENTED
THESIS
1. Shek Poi Ngian, Structural Behaviour of Built-Up Steel Sections Using Partial Strength Connection. Ph.D. Thesis, Universiti Teknologi Malaysia, Malaysia (2009)
EDITED BOOK
1. Structural Behaviour of Innovative Constructional Steel, Edited by Shek Poi Ngian and Shahrin Mohammad, 2016, Penerbit UTM Press
BOOK CHAPTER
1. Low Jun Xiu, Shek Poi Ngian, Mahmood Md Tahir, Experimental Investigation On
Lightweight Composite Slab For Floating Structures. Improving Flood Management, Prediction And Monitoring: Case Studies In Asia. Emerald Publishing Limited, 2018, volume 20, Pages 73-78.
2. Tan Wee Jet, Mahmood Md Tahir, Shek Poi Ngian, Ali Keyvanfar, Economic Aspects of Cruciform Column Used in the Design of unbraced Multi-Storey Steel Frame, Chapter 5, Edited by Ali Keyvanfar, Mahmood Md Tahir and Arezou Shafaghat, Lambert Academic Publishing, 2016, Pages 84-107.
3. Alvin Lim Wei Hoong, Shek Poi Ngian, Lee Yee Yong, Sariffuddin Saad, Structural Behavior of End-Plate Connections to Cruciform Column Section under Monotonic Loading, Chapter 1, Edited by Shahrin Mohammad and Shek Poi Ngian, Penerbit UTM, 2016, Pages 1-14.
4. Law Chin Yong, Shek Poi Ngian, Lee Yee Yong, Ramli Abdullah, Experimental Investigation on End-Plate Connection with Built-up Beam Section, Chapter 2, Edited by Shahrin Mohammad and Shek Poi Ngian, Penerbit UTM, 2016, Pages 15-28.
22
JOURNAL
ISI Journal : 1. Mahmood Md. Tahir, Hossein Mohammadhosseini, Shek Poi Ngian, Mahmud Kori
Effendi (2018) I-beam to square hollow column blind bolted moment connection: Experimental and numerical study. Journal of Constructional Steel Research 148 (2018) 383–398. (IF 2.509)
2. Joma HM Omer, Ahmad BH Kueh and Poi-Ngian Shek (2018) Three-dimensional numerical and linearly distributed multi-parameter fitted analytical modeling of hybrid beam–column with partially welded flush end-plate connection. Advances In Structural Engineering. Volume 21, pp 1777-1791. DOI: 10.1177/1369433218754698 (IF 0.968)
3. Yeong Huei Lee, Poi Ngian Shek, Shahrin Mohammad (2017) Structural performance of reinforced interlocking blocks column. Construction and Building Materials 07/2017; 142:469-481., DOI:10.1016/j.conbuildmat.2017.03.110 (IF: 2.421)
4. A. Saggaff, M.M. Tahir, A. Sulaiman, S.P. Ngian, J. Mirza (2015) Standardization of composite connections for trapezoid web profiled steel sections. Structural Engineering & Mechanics 08/2015; 55(4):765-784. DOI:10.12989/sem.2015.55.4.765 (IF 0.927)
5. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang (2015) Wind-moment design of semi-rigid un-braced steel frames using cruciform column (CCUB) section. International journal of steel structures 03/2015; 15(1-1):115-124. DOI:10.1007/s13296-015-3008-2 (IF 0.471)
6. CZ Kam, ABH Kueh, KB Low, XY Wang, PN Shek (2014) “Uniaxial compressive stability of laminated composite plate with localised interfacial degeneration” Materials Research Innovations 18 (S6), S6-109-S6-116 (IF 0.473)
7. HH Lau, PN Shek, BH Ahmad Kueh, MT Mahmood (2014) “Economic aspect of square hollow section in the design of multi-storey unbraced steel frame” Materials Research Innovations 18 (S6), S6-164-S6-168 (IF 0.473)
8. Yeong-Huei Lee, Cher-Siang Tan, Shahrin Mohammad, Mahmood Md Tahir, Poi-Ngian Shek (2014) “Review on Cold-Formed Steel Connections” The Scientific World Journal, Volume 2014, Ariticle ID 951216, 11 pages. (Impact factor 2013: 1.74)
9. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang (2012) “Experimental Evaluation of Flush End–Plate Connection with Built-up Hybrid Beam Section” Advances in Structural Engineering, Volume 15, No 2, pp 357 – 367. (Impact Factor 2011 : 0.463)
10. Mahmood Md Tahir, Shek Poi Ngian (2011) “Limiting the sway on multi-storey un-braced steel frames bending on weak axis with partial strength connections” Structural Engineering and Mechanics, Volume 38, Number 6, pp 825-847. (Impact factor 2011: 0.429)
11. Mahmood Md Tahir, Irwan Juki, Lee Hong Yong, Shahrin Mohammad, Shek Poi Ngian (2011) “Finite Element Analysis of Flush End-Plate Connections Connected to Column Web.” International Journal of Steel Structures (IJOSS) Vol 11, No 3, 247-258. (Impact Factor 2011: 0.362)
12. Mahmood Md Tahir, Shek Poi Ngian, Tan Cher Siang (2009) “Push-Off Tests on Pin-Connected Shear Studs with Composite Steel-Concrete Beams” Construction and Building Materials 23 (2009) 3024 – 3033 (Impact factor 2009: 0.947)
23
13. Mahmood Md Tahir, Shek Poi Ngian, Arizu Sulaiman, Tan Cher Siang (2009) “Experimental Investigation of Short Cruciform Columns Using Universal Beam Sections” Construction and Building Materials 23 (2009) 1354–1364 (Impact factor 2009: 0.947)
SCOPUS Journal : 1. E. U. Syamsuri, M. M. Tahir, B. A. Basyaruddin, A. Sulaiman, S. P. Ngian (2018)
Conceptual Design Using Industrialized Building System For Affordable Housing Construction In Indonesia. Advanced Science Letters, Volume 24, pp 4322-4325. DOI: 10.1166/ASL.2018.11598.
2. Bishir Kado, Shahrin Mohammad, Yeong Huei Lee, Poi Ngian Shek, Mariyana Aida Ab. Kadir, Fadhluhartini Muftah (2018) Review On Column Fire Resistance Design For Concrete Filled Steel Tube. Jurnal Teknologi 80:6 (2018) 169–179.
3. M. M. Lawan, P. N. Shek, M. M. Tahir (2018) Comparative Study between Linear-Interpolation and Stress-Block Methods of Composite Design Using Cold-Formed Steel Section. International Journal of Engineering & Technology, 7 (3.9) (2018) 38-41. DOI: 10.14419/IJET.V7I3.9.15270.
4. Fadhluhartini Muftah, Mohd Syahrul Hisyam Mohd Sani, Shahrin Mohammad, Shek Poi Ngian, Mahmood Md Tahir (2016) Temperature rise of cold-formed steel built-up back-to-back column under standard fire. Jurnal Teknologi 05/2016; 78(5-4)., DOI:10.11113/jt.v78.8526
5. Zaiton Haron, Nadirah Darus, Lim Ming Han, Zanariah Jahya, Mohamad Fauzi Abdul Hamid, Khairulzan Yahya, Yee Ling Lee, Poi Ngian Shek (2015) A Preliminary Study Of Occupational Noise Exposure Among Leaf Blower And Grass Cutter Workers In Public University. Jurnal Teknologi 11/2015; 77(16). DOI:10.11113/jt.v77.6412
6. T. Y. Taher, M. M. Tahir, A. Sulaiman, S. P. Ngian, A. Saggaff (2015) Steel Weight Saving Developed From Semi-Continuous Construction In Multi-Storey Braced Steel Frame Based On Euro-Code 3. Jurnal Teknologi 11/2015; 77(16). DOI:10.11113/jt.v77.6401
7. Zaiton Haron, Lim Ming Han, Nadirah Darus, Yee Ling Lee, Zanariah Jahya, Mohamad Fauzi Abdul Hamid, Khairulzan Yahya, Poi Ngian Shek (2015) A preliminary study of environmental noise in public university. Jurnal Teknologi 11/2015; 77(16). DOI:10.11113/jt.v77.6411
8. M.M. Lawan, M.M. Tahir, S.P. Ngian, A. Sulaiman (2015) Structural Performance of Cold-Formed Steel Section in Composite Structures: A Review. Jurnal Teknologi 05/2015; 74(4-4):165-175. DOI:10.11113/jt.v74.4625
9. Ker Shin Mu, Poi Ngian Shek, Arizu Sulaiman, Boon Cheik Tan (2015) Parametric Study of Compound Cold-Formed Steel Sections as Flexural Members. Jurnal Teknologi 05/2015; 74(4-4):61-66. DOI:10.11113/jt.v74.4610
10. Boon Cheik Tan, Poi Ngian Shek, Mahmood Md Tahir, Ker Shin Mu (2015) Analytical Study of End-Plate Connection on Cruciform Column Section. Jurnal Teknologi 05/2015; 74(4). DOI:10.11113/jt.v74.4602
11. Cher-Siang Tan, Yeong-Huei Lee, Yee-Ling Lee, Shahrin Mohammad, Arizu Sulaiman, Mahmood Md Tahir, Poi-Ngian Shek (2013) “Numerical Simulation of Cold-Formed Steel Top-Seat Flange Cleat Connection” Jurnal Teknologi, Volumn 61 (3), 63-71
24
12. Chee-Zhou Kam, Ahmad Beng-Hong Kueh, Poi-Ngian Shek, Cher-Siang Tan, Mahmood Md Tahir (2012) “Flexural Performance of Laminated Composite Plates with Diagonally Perturbed Localized Delamination” Advance Science Letters, Volume 14, 455 – 457. (Impact factor 2010: 1.253)
13. Poi-Ngian Shek, Mahmood Md Tahir, Cher-Siang Tan, Ahmad Beng-Hong Kueh, Shahrin Mohammad (2012) “Experimental Investigation on Locally Produced Cold-Formed Steel Sections for Roof Truss System” Advance Science Letters, Volume 13, 620 – 623. (Impact factor 2010: 1.253)
14. Cher-Siang Tan, Mahmood Md Tahir, Poi-Ngian Shek, Shahrin Mohammad, Ahmad Beng-Hong Kueh (2012) “Structural Behaviour of Combined Flange-Cleat and Gusset Plate Connection for Cold-Formed Steel Double Channel Sections” Advance Science Letters, Volume 14, 517 – 520. (Impact factor 2010: 1.253)
15. Mahmood Md Tahir, Shek Poi Ngian, Tan Cher Siang (2006) “Performance of Cruciform Column Using Universal Beam Sections under Axial Compression Load” Journal Teknologi, 43(B) Dis. 2005: 51 - 66
PROCEEDINGS/CONFERENCE
1. Bishir Kado, Shahrin Mohammad, Yeong Huei Lee, Poi Ngian Shek, Mariyana Aida Ab Kadir (2018) Temperature Analysis of Steel Hollow Column Exposed to Standard Fire. Journal of Structural Technology, Volume 3, Issue 1.
2. Khadavi; Tahir, MM; Ngian, SP; Sulaiman, A; Bakri, A (2018) Economic Aspects of Cold Formed Steel Section Designed as Composite Beam. Advanced Science Letters, Volume 24, Issue 6, pp 4318-4321. DOI: 10.1166/asl.2018.11597.
3. B Kado, S Mohammad, Y H Lee, P N Shek, M A A Kadir (2018) Experimental investigation on temperature distribution of foamed concrete filled steel tube column under standard fire. Iop Conference Series : Earth And Environment Science. Volume 140.
4. Musab N A Salih, Mahmood Md Tahir, S Mohammad, Y Ahmad, A Sulaiman, PN Shek, Achmad Abraham, Muhammad Firdaus, K M Aminuddin and Khadavi (2018) Experimental Study On Flexural Behavior Of Partially Encased Cold-Formed Steel Composite Beams Using Rebar As Shear Connector. 10th Asia Pacific Structural Engineering And Construction Conference (APSEC 2018). 13 – 15 November 2018, Langkawi, Malaysia.
5. A K Mariyana, M Najmi Mastor, M S Abdul Rahman, Z Nurizaty, P N Shek, and M Z Ramli (2018) Utilization Of Rubberized Concrete Columns To Enhance Damping Ratio Subjected To Seismic Loading. Regional Conference In Civil Engineering (RCCE) 2018. 5 – 6 September 2018, Royal Ambarrukmo Hotel, Yogyakarta, Indonesia.
6. Nur Adilah Mohd Idrus, Mahmood Md Tahir, Shek Poi Ngian (2017) Structural Behavior Of Prefabricated Pad Footing System Designed Using Cold-Formed Steel Lipped Channel Section. 2nd Proceeding Of Civil Engineering: Volume 1 - Structure And Materials.
7. Nurizaty Zuhan, Shek Poi Ngian (2017) Section Properties Calculation By Matlab Software Of Lipped C Section. 2nd Proceeding Of Civil Engineering: Volume 1 - Structure And Materials.
25
8. Yew Zhi Hao, Mahmood Md. Tahir, Shek Poi Ngian (2017) Experimental Investigation Of Long Interlocking Brick Column Subjected To Eccentric Load. 2nd Proceeding Of Civil Engineering: Volume 1 - Structure And Materials.
9. Lim Teck Thong, Shek Poi Ngian (2017) Structural Behavior Of Light Weigh Steel Frame Under Combined Gravity And Lateral Loadings. 2nd Proceeding Of Civil Engineering: Volume 1 - Structure And Materials.
10. Yee Yong Lee, Yeong Huei Lee, Shahrin Mohammad, Poi Ngian Shek, Chau Khun Ma (2017) Thermal Characteristics Of A Residential House In A New Township In Johor Bahru. Iop Conference Series: Materials Science And Engineering. Volume 271, pp 1-7.
11. Mahmood Md Tahir, Anis Saggaff, Shek Poi Ngian, Arizu Sulaiman (2017) “Economic Aspects Of Interlocking Hollow Brick System Designed For Industrialized Building System” AIP Conference Proceedings, Volume 1903.
12. Yeong-Huei Lee, Cher-Siang Tan, Mahmood Md Tahir, Shahrin Mohammad, Poi-Ngian Shek, Yee-Ling Lee (2014) “Influence of Angle Thickness towards Stiffness and Strength Prediction for Cold-Formed Steel Top-Seat Flange Cleat Connection” Applied Mechanics and Materials, Volume 479-480, pp 1144-1148.
13. Anis Saggaff, Mahmood Md Tahir, Poi-Ngian Shek (2013) “Flexural Behavior of Steel Reinforced Brick Beam Utilizing Interlocking Brick System” Advanced Materials Research, Volume 661, 116-119.
14. Yee Ling Lee, Cher Siang Tan, Yeong Huei Lee, Shahrin Mohammad, Mahmood M. Tahir, Poi Ngian Shek (2013) “Effective Steel Area of Fully Embedded Cold-Formed Steel Frame in Composite Slab System under Pure Bending” Applied Mechanics and Materials, Volume 284 – 287, 1300 -1304
15. Poi-Ngian Shek, Mahmood Md Tahir, Cher-Siang Tan, Arizu Sulaiman (2013) “Experimental Investigation of Retrofitted Extended End-Plate Connections” Applied Mechanics and Materials, Volume 284 – 287, 1330 – 1333
16. Yeong Huei Lee, Cher-Siang Tan, Yee Ling Lee, Mahmood M. Tahir, Shahrin Mohammad, Poi Ngian Shek (2013) “Numerical Modelling of Stiffness and Strength Behaviour of Top-seat Flange-cleat Connection for Cold-formed Double Channel Section” Applied Mechanics and Materials, Volume 284 – 287, 1426 – 1430
17. Shahrin Mohammad, Mahmood Md Tahir, Cher-Siang Tan, Poi-Ngian Shek (2012) “Experimental Investigation on Wide-Span Cold-Formed Steel Roof Truss System” Applied Mechanics and Materials, Volume 166 - 169, 1304 - 1307.
18. Anis Saggaff, Mahmood Md Tahir, Norwati Bte Jamaluddin, Poi-Ngian Shek, Cher-Siang Tan (2012) “Experimental Test on Composite Beam with Various Slab Systems” Applied Mechanics and Materials, Volume 166 - 169, 33 - 36.
19. Roya Kohamdel, Behzad Abdi, Poi-Ngian Shek, Mahmood Md Tahir, Ahmad Beng-Hong Kueh (2012) “Optimization of Cold-Formed Channel Sections using Imperialist Competitive Algorithm” Applied Mechanics and Materials, Volume 166 - 169, 493 - 496.
20. Shek Poi Ngian, Mahmood Md Tahir, Tan Cher Siang, Ahmad Kueh Beng Hong (2011) “Experimental Investigation of End-Plate Connection with Cruciform Column Section” Advanced Materials Research 250-253, pp. 3730-3733.
21. Mahmood Md Tahir, Anis Saggaff, Arizu Sulaiman, Shek Poi Ngian, Tan Cher Siang, Ahmad Kueh Beng Hong (2011) “Behaviour of Composite Beam with Trapezoid Web
26
Profiled Steel Section in Sub-Assemblage Frame” Advanced Materials Research 250-253, pp. 1271-1274.
22. Tan Cher Siang, Mahmood Md Tahir, Shek Poi Ngian, Ahmad Kueh Beng Hong (2011) “Experimental Investigation on Slip-in Connection for Cold-formed Steel Double Channel Sections” Advanced Materials Research 250-253, pp. 1038-1041.
23. A.B.H. Kueh, W.W. Seh, P.N. Shek, C.S. Tan, M.M. Tahir (2011) “Maximum Local Thermal Effects Carpet Plot for Symmetric Laminated Composite Plates” Advanced Materials Research 250-253, pp. 3748-3751.
24. Fadhluhartini binti Muftah, Mohd Syahrul Hisyam bin Mohd Sani, Shahrin bin Mohammad, Mahmood Md Tahir, Shek Poi Ngian (2016) “Temperature Development Of Cold Formed Steel Column Channel Section Under Standard Fire” International Conference On Advanced Science, Engineering And Technology (ICASET)
25. Shek Poi Ngian, Lee Yeong Huei (2015) “Capacity Of Interlocking Stub Column With Cement Mortar Infill Under Axial Compression Load” 9th Asia Pacific Structural Engineering And Construction Conference & 8th Asean Civil Engineering Conference (APSEC-ACEC 2015)
26. Woon Chin Peow, Shek Poi Ngian, Mahmood Md Tahir, Ahmad Kueh Beng Hong (2015) “Compressive Strength Of Ground Waste Seashells In Cement Mortars For Masonry And Plastering” Applied Mechanics And Materials
27. Mohd Syahrul Hisyam bin Mohd Sani, Hau Tam Ping, Tan Cher Siang, Lee Yeong Huei, Shek Poi Ngian, Arizu Sulaiman (2015) “Force And Deformation Behaviour Of Roof Truss System With Cold-Formed Steel Channel Section” 9th Asia Pacific Structural Engineering And Construction Conference & 8th Asean Civil Engineering Conference
28. Tan Boon Kai, Shek Poi Ngian, Tan Cher Siang, Ahmad Kueh Beng Hong (2014) “Monotonic Behaviour Of Beam-To-Column Connections With Double Channel Cold-Formed Steel Sections” National Seminar On Civil Engineering Research SEPKA 2014
29. Woon Chin Peow, Shek Poi Ngian, Mahmood Md Tahir (2014) “Engineering Properties Of Bio-Inspired Cement Mortar Containing Seashell Powder” National Seminar On Civil Engineering Research SEPKA2014
30. Seah Ivy, Shek Poi Ngian (2014) “Parametric Study of Blind Bolted End-Plate Connection On Structural Square Hollow Section” 2014 Structural And Civil Engineering Workshop (SCEW 2014)
31. Tan Boon Kai, Shek Poi Ngian, Tan Cher Siang, Ahmad Kueh Beng Hong (2014) “Finite Element Analysis Of Top-Seat Beam-To-Column Connections With Double Channel Cold-Formed Steel Sections” The 6th International Conference Of Asian Concrete Federation
32. Boon-Cheik Tan, Poi-Ngian Shek, Mahmood Md Tahir, Ker-Shin Mu (2013) “Analytical Study of End-Plate Connection on Cruciform Column Section” The 9th International Conference On Geotechnical And Transportation Engineering And The 1st International Conference On Construction And Building Engineering, 2013 (GEOCON 2013)
33. Ker-Shin Mu, Poi-Ngian Shek, Arizu Sulaiman, Boon-Cheik Tan (2013) “Parametric Study of Compound Cold-Formed Steel Sections as Flexural Members” The 9th International Conference On Geotechnical And Transportation Engineering And The 1st International Conference On Construction And Building Engineering, 2013 (GEOCON 2013)
27
34. Roya Kohandel Gargari, Mahmood Md Tahir, Poi-Ngian Shek (2012) “Finite Element Models for Blind-Bolted End-Plate Connection on Structural Hollow Section” 8th Asia Pacific Structural Engineering and Construction Conference (APSEC 2012)
35. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang (2012) “Experimental and Theoretical Analysis of Retrofitted Extended End-Plate Connections” 8th Asia Pacific Structural Engineering and Construction Conference (APSEC 2012)
36. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang (2011) “Experimental Investigation on Sub-Assemblage Frame with Cruciform Column Section.” Full paper accepted for The 6th International Symposium on Steel Structures (ISSS 2011)
37. Shek Poi Ngian, Mahmood Md Tahir, Tan Cher Siang, Arizu Sulaiman (2011) “Experimental Investigation on Full-Scale Sub-Assemblage Frame” 7th International Conference on Steel and Aluminium Structures 2011 (ICSAS11)
38. Tan Cher Siang, Mahmood Md Tahir, Shek Poi Ngian (2011) “Experimental Investigation on Bolted Angle Connections for Cold-Formed Steel Sections” 7th International Conference on Steel and Aluminium Structures 2011 (ICSAS11)
39. Mahmood Md Tahir, Irwan Juki, Tan Cher Siang, Shek Poi Ngian (2011) “Experimental Investigation of Flush End-Plate Connection Connected to Column Web” 7th International Conference on Steel and Aluminium Structures 2011 (ICSAS11)
40. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Wong Kah Leong (2008) "Comparison of Partial Strength Connection between Extended and Flush End-Plate Connections Using Built-Up Beam Sections" International Graduate Conference on Engineering and Science 2008 (IGCES 2008)
41. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Wong Kah Leong (2008) "Experimental Behaviour of Partial Strength Steel Beam-To-Column Connection Using Built-Up Beam Sections" 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management (EnCon 08)
42. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Wong Kah Leong (2007) "The Economic Comparison Of Multi-Storey Un-braced Steel Frames Design In Semi-Continuous Construction" National Seminar on Civil Engineering Research (SEPKA 2007)
43. Wong Kah Leong, Airil Yasreen Mohd Yassin, Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian (2007) "Application Of Cold-Formed Steel Sections For Permanent Formwork Of Pad Footing Foundation" National Metallurgical Conference 2007
44. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Wong Kah Leong (2007) "The Use Of Cruciform Column Sections For Multi-Storey Steel Frames" National Metallurgical Conference 2007
45. Mahmood Md Tahir, Anis Saggaff, Arizu Sulaiman, Shek Poi Ngian (2007) "Standardisation Of Partial Strength Composite Connections Using Pre-Fabricated Steel Sections" EACEF
46. Anis Saggaff, Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Wong Kah Leong. (2007) "Buckling Analysis Of Cruciform Column Using Universal Beam Section" EACEF
47. Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Shek Poi Ngian (2007) "Economic Aspects of Partial Strength Connection in the Design of Braced Steel Frame Using Trapezoidal Web Profiled Steel Sections" Persidangan Kebangsaan AWAM 07
28
48. Shek Poi Ngian, Mahmood Md Tahir, Tan Cher Siang (2007) "Ultimate Axial Load of Cruciform Column Using Universal Beam Section" Persidangan Kebangsaan AWAM 07
49. Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian (2006) "Typical Experimental Tests on Cold-Formed Steel Structures" 6th Asia Pacific Structural Engineering and Construction Conference 2006
50. Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian, Anis Saggaff (2006) "Economic Aspect of Un-braced Frame Design for Multi Storey Structure Using Cruciform Column" 6th Asia Pacific Structural Engineering and Construction Conference 2006
51. Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian, Sariffudin Saad (2006) "Application of Wind Moment Method on the Design of Multi-storey Un-braced Steel Frames with Partial and Full Strength Connections" 6th Asia Pacific Structural Engineering and Construction Conference 2006
52. Mahmood Md Tahir, Shek Poi Ngian, Tan Cher Siang, Anis Saggaff (2006) "Development of Sections Properties Tables for Cruciform Column Using Universal Beam Sections" 1st Regional Postgraduate Conference on Engineering and Science 2006
53. Mahmood Md Tahir, Anis Saggaff, Shek Poi Ngian, Shahrin Mohamed (2006) "Full scale testing on composite connection using Trapezoid Web Profiled steel section" 19th Australasian Conference on the Mechanics of Structures and Materials
54. Mahmood Md Tahir, Shek Poi Ngian, Tan Cher Siang (2006) "The Economic Aspect Of Multi-Storey Un-braced Steel Frames Design In Continuous Construction Using S275 And S355" International Seminar on Civil and Infrastructure Engineering 2006 (ISCIE '06)
SEMINARS/WORKSHOPS
1. Mahmood Md Tahir, Shek Poi Ngian, Arizu Sulaiman, “short course CREaTE JKR on Advanced Structural Steel Design to Eurocode 3” short course CREaTE JKR, 24 – 26 September 2018.
2. Shahrin Mohamed, Shek Poi Ngian, Arizu Sulaiman, “Basic Structural Steel Design to Eurocode 3” short course CREaTE JKR, 1 – 3 August 2018.
3. Arizu Sulaiman and Shek Poi Ngian, “Short Course on Steel Design to EC3” Lecture given at Forensic Engineering Centre (FEC), 28-29 July, 2016, FKA, UTM.
4. Shek Poi Ngian, Basic Steelwork Design to Eurocode 3, Seminar for PGSS FKA, 22 August 2015, D02 Smart Classroom, FKA, UTM.
INVITED/GUEST SPEAKER 1. Shek Poi Ngian, Innovative Construction Using Cruciform Column Universal Beam
(CCUB) Section, public lectures given at Universitas Sriwijaya, 16 – 18 October 2018.
2. Shek Poi Ngian, Ethics in Engineering Profession, lecture given for program PPMH, 20 May 2015, M47-215, FKA, UTM.
3. Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian, “An Innovative Prefabricated Pad Footing Foundation Constructed using Cold-Formed Steel Sections”, UTM Technology Transfer Showcase (TTS) 2015
29
CONSULTANCY 1. Analysis and Testing on Dexion Asia Sdn. Bhd. Product. Dexion Asia Sdn Bhd. 1/1/2018
– 31/12/2018.
2. Fire Resistance Test For 3 Timber Sample For 1 Hour. Universiti Teknologi Mara Shah
Alam. 1/1/2018 – 6/2/2018.
3. Mechanical Testing on Steel Storage Racking System DEX 808 to AS4084. Dexion Asia
Sdn Bhd. 1/1/2017 – 31/8/2017.
4. Fire Resistance Test on Concrete Column. Universiti Teknologi Mara (UiTM) Shah
Alam. 1/11/2017 – 20/12/2017.
5. Fire Resistance Test on FireProofing Material. SIKA Kimia Sdn Bhd. 1/2/2017 –
31/7/2017.
6. 2 Hours Fire Resistance Test for Cementitious Vermiculite Fireproof Coating. Ap
Firespray Plt. 11/8/2017 – 21/11/2017.
7. Structural Test on Racking Component. Approved Forensic International. 1/3/2016 –
11/3/2016.
8. Fire Resistance Test on Steel Column. SIKA Kimia Sdn Bhd. 1/4/2016 – 30/6/2016.
9. Fire Resistance Test on Composite Column. Universiti Teknologi Mara Shah Alam
(UiTM). 1/1/2016 – 30/12/2016.
10. Analysis and Testing on Mechanical Properties for Schaefer Systems International
Product. Schaefer Systems International Sdn Bhd. 1/1/2015 – 31/12/2015.
11. Fire Testing on FRP Column. Universiti Teknologi Mara Shah Alam. 1/1/2015 –
9/3/2015.
12. Fire Testing on Cold-Formed Steel Column. Universiti Teknologi Malaysia (VOT 4F258).
1/1/2015 – 11/6/2015.
13. Analysis and Testing on Mechanical Properties for Schaefer Systems International
Product. Schaefer Systems International Sdn Bhd. 1/1/2014 – 5/8/2014.
14. Fire Testing on Concrete and Composite Column. Universiti Teknologi Mara Shah Alam
(UiTM). 1/6/2014 – 31/8/2014.
15. Analysis and Testing on Mechanical Properties for Schaefer Systems International
Product. Schaefer Systems International Sdn Bhd. 1/1/2013 – 31/12/2013.
16. Structural Test on Racking Component. Approved Forensic International. 1/4/2013 –
24/4/2013.
17. Full Scale Stub Column Test. Approved Forensics Sdn Bhd. 2/4/2012 – 10/4/2012.
18. Analysis and Testing on Mechanical Properties for Schaefer Systems International
Product. Schaefer Systems International Sdn Bhd. 6/2/2012 – 28/12/2012.
19. Analysis and Testing on Mechanical Properties for Schaefer Systems International
Product. Schaefer Systems International Sdn Bhd. 20/4/2011 – 2/12/2011.
20. Analysis and Testing on Mechanical Properties for Schaefer Systems International
Product. Schaefer Systems International Sdn Bhd. 1/2/2010 – 10/12/2010.
21. Shear and Tensile Test for Bolts. T & E Project Consultancy Sdn. Bhd. 1/9/10 –
25/11/10.
30
MOU/MOA (Coordinator)
1. MEMORANDUM PERSEFAHAMAN (MoU) DI ANTARA UTM DAN CSDC ACADEMY
SDN BHD. CSDC ACADEMY SDN BHD. 22/8/17 (3 Years)
2. MEMORANDUM OF UNDERSTANDING (MoU) between IPM PROFESSIONAL
SERVICES SDN BHD and UNIVERSITI TEKNOLOGI MALAYSIA (UTM). IPM
PROFESSIONAL SERVICES SDN BHD. 21/10/17 (3 Years)