curriculum vitae

MOHAMED KABEER AHMEDE-mail: [email protected] /Mobile No: +966-537074916

An enthusiastic & high energy driven professional targeting senior level assignments in Project Management, Construction & Site contract Management with a reputed organization

P R O F I L E S U M M A R Y

Mr. Kabeer Ahmed is an Designer Professional, I have the honor to inform you that I am young, qualified with a vast experience Of Nineteen (19) year in design & drafting with the help of the designs software such As Intergraph microstation SE & V8i, Auto cadd 2016 and familiar with Oil & Gas Project and International Aramco standards. A dynamic, focused & result-oriented professional with Nineteen years of rich senior experience

in Project Planning & Management, Construction Management, Materials Management, and Liaison & Coordination.

Acquired experience in all types of construction works & Designing along with Civil, infrastructure, mechanical, Piping, Sanitary effluent treatment and water treatment,

Currently working with M/S Jacobs Zamel & Turbag Consulting Engineers as Designer

O R G A N I S A T I O N A L E X P E R I E N C E

Refer to Annexure for projects handled across career

M/S Jacobs Zamel & Turbag Consulting Engineers (Jacobs ZATE Al-khobar KSA)From: JANUARY, 2013 TO-TILLJob Title: Sr.DESIGNER

Senior CIVIL DESIGNER (Infrastructure & Utilites Division), June 2013 – Present - Key project to Date: Designing Infrastructure & Construction of Potable, Storm & Sanitary EWO & BI projects. New Home Ownership Development (SDHO) in South Dhahran Residential Community of Excellence (AJYAL) for employees of Saudi Aramco.Modon projects - Riyadh-2 & Dammam-1, Industrial utilities development sewage pipe networks, potable water and irrigation water. preparing layout drawing and fitting & section details.As being involved in various projects form conceptual stage therefore assist in Project Management activities of the projects. Responsible for dealing with day to day matters, Planning of the project works, coordination with different specialties, finalization of various project drawings/documents, timely submission of various submittals.

- Responsibilities include project study, conceptual design and civil infrastructure development of the Projects.

- Conceptual and detailed planning and designing of storm water drainage, irrigation, Potable water. - Coordinated meeting with lead project engineer as per instructions design on possible construction

site issues. - Lead project engineer given instruction to me preparation to all drawings according to site

condition in designing software.- Responsible for plan and network layout, section details, detail design.- Trying to achieve best technical competence and job related functional skills under the guidance of

our project manager.- Keeps commitments and completes work by established deadlines.- Designing of Water Supply, potable, Storm water, drainage and sewer waste water drainage, Piping

Network Systems.

KABEER AHMED DESIGNER (2/10)

- Checking final drawings before issuing to Contractor and Clients, QA/QC.

KHUFF GAS Wells & Remote Headers Project SAG10305 on various CERS M/s Jacobs Engineering company providers industrial services to M/s ARAMCO And other public and private sector enterprises. My nature of job includes following functions

1. Drawing search from iPlant, assignment of drawing number and forwarding request for higher revision numbers through company management to client.

2. Preparing design and drawing deliverables on micro-station (DGN file), engineering estimates on M/s excel, bar details and getting approval of the company lead engineer before submittal to the client.

3. Preparing deliverable control list and index for Q-index, M-index and S-index drawings.4. Preparation of design in collaboration with other disciplines viz. piping, instrumentation, electrical

and mechanical.5. Conducting quality checks/ assurance as per quality procedure i.e., inter quality check squad check

and finally ABR and office check.6. Preparing PDF & DGN format native file and printouts for submittal.

DescriptionConceptual and detailed planning and design of storm water, waste water drainage, Irrigation, potable water using Designing Software Microstation & AutoCad Software.

Year 2016 Aramco Projects Project: SAG17006 Kaust Project: SAG17052 New office for MUD plant,

marine facilities TanajbProject: SAG17053 Saffaniyah OME BuildingProject: SAG17054 Khursaniyah OME

Building (EWO-14C197)Project: SAG17055 Relocate & merge Dhahran

office. Building, west park area Project: SAG17068 Redevelopment of DRT pipe

line (zone-1 & zone-4) Project: SAG208100 Shaybah GOSP 4 new access

road, field link road

Year 2015 Aramco Projects Project: SAG17020 Berri gas plantProject: SAG17018 Construct station yard at

Dhahran steel shelter (EWO-13C041A )Project: SA208500 National guard thuwal Project: SA800501 NGFC STP (Storm and sanitary) Project: SA210200 South Dhahran home ownership ajyal ( Detail Design ) (NESMA-SDHO)

Project: SA800121 Modon – Riyadh-2Project: SAG-17052 New office for mud plant

Tanajib yardProject: SAG17053 Saffaniyah OME BuildingProject: SAG17054 Khursaniyah OME

Building (EWO-14C197)Project: SAG-17055 (EWO-14C012A) Relocate And merge Dhahran ECC system & integrate With RSCCProject: SAG17006 Kaust (Potable Water) Year 2014 Aramco Projects Project: SAG17005 South Dhahran home Ownership development Project: SAG17006 KaustProject: SAG17008 Expec advanced research CenterProject: SAG17011 Early childhood buildingProject: SA207600 Juaymah(All Utility Networks)

Year 2013 Aramco Projects Project: SAG17005 South Dhahran home Ownership developmentProject: SA207600 Juaymah(All Utility Networks)

M/S CORAL CONSTRUCTION (MADRAS INDIA)From: MARCH-2011 TO-DECEMBER-2012Job Title: Site Supervisor Construction & Designer

M/S coral construction company provides construction services to public and private sector enterprises as well as to building owner groups. My nature of job includes following functions:

1. To supervise construction activities as per approved construction drawings.2. To provide as-build red-line marked drawings (microstation dgn file and Auto Cad dwg file)3. To provide services for local changes in the design at site as per instruction of site design

engineer.4. Successfully worked for construction of various high raise hotel building, hospital buildings,

residential buildings, etc.5. Experience in planning, executing construction projects involving method engineering,

development, and contract administration, resource planning adopting modern construction methodologies in compliance with quality and safety standards.

6. Administration and Team Management in Construction office building and complex and Final As-Built Caddying.

7. Well versed with Design Drawings, Construction Shop Drawings, CAD Operations, CAD Design, and Support in Software Technical.

8. Pursuit of challenging assignments in the field of Drafting Operations and Supports the Construction Group with an organization of high repute.

SAUD CONSULTING SERVICES (Al-KHOBAR KSA)From: MARCH-2002 TO-FEBRUARY-2011Job Title: CAD DESIGNER

Worked on Saudi Govt. project (main sewage line for al-hofuf to mubarraz, al-hassa), KJO Project and ARAMCO project Dhahran and Ras tanura Refinery

M/s SAUD Consult provides design and supervision services to public and private sector enterprises as well as to building owner group. My nature of job includes following functions:

1. Preparing design and drawing deliverables on microstation (DGN file), engineering estimates on M/s excel and getting approval of the company lead engineer before submittal to the client.

2. Preparing deliverable control list and index for Q-index, M-index and S-index drawings.3. Preparation of design in collaboration with other disciplines viz. piping, instrumentation,

electrical and mechanical.4. Conducting quality checks/ assurance as per quality procedure i.e., inter quality check, squad

check and finally ABR and office Check.5. Collecting and incorporating design data into deliverable drawings.

Experience with Saudi Consult Year 2002 K.F.U. Projects Buildings : Permanent campus Project

(Project NO: 9910) : College of Nursing and Dentistry : College of Medicine Male : College of Applied Medical science: College of Dentistry Male Section Furniture, Equipment and signage

Layout First and Second floor

Government Projects: Evaluation/Upgrading the

Pump station and Main Sewage Lines for Hofuf and Al-Mubarraz, AlHasa (Project NO: SC004)

: Upgrading Water Network for Qatif, Tarout, Saihat (Project NO: SC005)

: Storm water system and Lowering Ground Water for Dammam – Khobar – Saihat – Qatif Districts (Project NO: SC-154)

Al-Khafji Projects-2003 - JOINT OPERATION-

KUWAIT & KHAFJI (SAUDI ARAMCO)

Urban : Phase - 1 Phase – 2 Phase – 3

Landscape : Hardscape & Softscape

Civil : Irrigation

Project-Year 2004 (SAUDI ARAMCO) RAS-TANURA REFINERY

#04N201A – (ISO Piping Detail) Two stage crude Unit

#04N214 – Installation of live house reel-two stage Crude unit

#04N238A – (ISO Piping Detail) Viscbreaker / coker,RT Refinery

#04N232 – (Piping Layout) Underground facilities NHT/CCR-1 Ras-Tanura Refinery


#05N211-R7 – New lean dag catridge filtration System

#05N220-R10 - Modification of header and piping for 26-E-3-fin fans

#05N221-R20 - Replacement of 600#-15# sach turbines with 600#-150# turbines

#05N241-R15 - Const. of new 24” B/D line @ P/W#17#05N243A - 24”60# Steam header as alternative

supply for HPB#11#05N249 - Install gas filter units for HPB’S

9&10main gas supply


#06N213-R04 - J80 1st & 2nd Stage backwash filter upgrade

#06N920 - As-built PFD @ P&ID#06N218-R04 - Repair plant 488-D-356 A/B

Foundations (strct) pipe support#06N288 - New Stairways and platform ext. for

J80-G-311 A/B (strct) pipe support#06N421 - R08-Convert fuel oil tank 1754 to diesel


#07N213-R03 - Nach 600#-51 Turbines with new 600#-150 Turbines

#07N201-R03 - UPG. PLT. 63 off spec paving asphalt product system

#07N266-R9 - J80 Drag oil system to truck loading facilities PLT.63

#07N207-R4 - New duplex strainers for asphalt pumpG-501

#07N299-R-03 - Alternate piping routing system


#08N205 - piping plan & ISO Piping details#08N213-R03 - Replace H2S lel system for PLT#15

PIB & Substn#10#08N219 - Crude oil sampler#08N255 - J80 Drag oil to truck loading facilities in

PLT#63#08N219 - Crude auto samplers



#09N009 - Install a new skim oil pump at RTR J78 plant

#09N018 - Install H2S detectors beacons and horn in N rod

#09N161 - Hydraulic operated valves at ethane plant


#10N010 - Install new skim oil pump at tank 78-D602 & D-603

#10N015 - Install auto drains on dryers pre-filters

@ PLT. 93, RT Refinery#10N029 - Install new protection system against

accumulated water @ pipway#23, PLT.51

#10N018 - Install online total organic carbon analyzer PLT.30


#11N007 - Provide form dam and stand pipe risers tank D-1001JFT

#11N022 - Utilize 15# steam header in the steam plant as secondary

#11N050 - Add emergency 480 MCC at sub 101 plants048 and 063 Ras-Tanura Refinery

#11N105 - Intstall emergency isolation valves for fire haz equipment in plant#490

M/S ZADAN CONSULTANTS (AL-KHOBAR KSA)From: JUNE-2001 TO-FEBRUARY-2002Job Title: CAD DESIGNER

Worked on Saudi SCECO project as civil Cad operator for electrical substation designs.

1. Prepare initial designs and drawings using microstation autocad electrical Package2. Discussed possible modifications with electrical engineers and architects and implemented

them accordingly3. Followed safety and design standards throughout the sceco project4. Updating marked up drawings given by lead project engineer.5. Hard working, loyal and confident worker with a go getter attitude6. Passionate to deliver my best for every project.

M/S DESIGN ACTION GROUP (MADRAS INDIA)From: NOVEMBER-1998 TO-MAY-2001Job Title: CAD DESIGNERRecruited to provide architectural design, office building, shopping complex, residential planning, and urban design for government project, commercial and private sector clients. Draft architectural rendering and develop 2D autocad elevation and sectional detail drawings views.

1. Responsible for preparing preliminary design sketches for small and large complex projects 2. Handled the tasks of drawing and drafting work by using Auto CAD for each assigned

project3. Assigned the responsibilities of preparing final designs like drafting and specifications as

per project approval4. Responsible for conducting surveys to collect data required in design preparation5. Knowledge of designing and preparing accurate drawings and specifications for buildings6. Updating marked up drawings given by Project engineer7. Preparing estimates, bar bending details as directed by the Project engineer.

M/S CONCRETE BUILDERS (MADRAS INDIA)From: MARCH-1997 TO-OCTOBER-1998Job Title: SITE CONSTRUCTION SUPERVISOR

Manage construction site supervisor activities and company projects.

Created progress reports of construction work performed by several contractors and after the project completion. Also prepared report to keep record of final amounts of materials used in construction.

Keep records and plans of completed projects. Worked on residential building and commercial plazas as resident site supervisor

M/S AVI COMPUTERIZED STRUCTURAL DESIGNS (MADRAS INDIA)From: JULY-1996 TO- FEBRUARY -1997Job Title: CAD OPERATOR

Worked on Structural Designer is involved projects Residential, Building & Commercial design Design layouts for residential and commercial complexes structures Generate drawings for foundations, roof, and column details project requirements Coordinate with architectural department


Challenging workInterested to work under a challenging atmosphere looking forward to leading position in your esteemed organization. Having built successful career, gaining wide skills and experience in computer aided design & drafting. I wish to continue my development by securing proper place where my academic and practical experience makes greater Achievements.

P R O F E S S I O N A L E X P E R I E N C E S E M P L O Y M E N T H I S T O R Y

Jacobs Zamel & Turbag Consulting Engineers (A Reputed Firm in Oil & Gas Industry)Saudi Arabia, Al-khobar

As Sr.Designer From Jan 2013 To Till

Coral ConstructionDesign & ConstructionMadras, India

As Design & Site supervisor From Mar 2011 To Dec 2012

Saudi consulting service (Saud consult) (A Reputed Firm in Oil & Gas Industry) Al –Khobar, Saudi Arabia

As Cadd Designer From Mar 2002 To Feb 2011

Zadan Consult ( SCECO Projects ) Electrical cad DesignerAl –Khobar, Saudi Arabia

As Cadd DesignerFrom Jun 2001 To Feb 2002

M/s.DAG – Design Action Group Architects Housing PlannersMadras, India

As Cadd draughtsmanFrom Nov 1998 To May 2001

M/s. Concrete BuildersA Construction Group Madras, India

As Site supervisor From Mar 1997 To Oct 1998

M/s. AVI Computerized Structural Designs Madras, India

As Structural DraughtsmanFrom July 1996 To Feb 1997

Work Exposure

Capable in cadd design plant piping, Isometric, Instrumentation, Hvac with the help of Intergraph Microstation, Autocad 2016 civil 3D. Also familiar with international and Saudi Aramco Standards.

E X T R A Q U A L I F I C A T I O N S S K I L L S

Extra Qualifications/ Skills - Having a very good working knowledge

Mech CI Cadd - Microstation V8,

USA Memorysystem - Auto Cad

Mech CI Cadd - PDS

AVEVA - PDMS

Saudi Consulting Services - Microsoft Office, Excel, Powerpoint

Languages - English, Tamil, Urdu, Malayalam, Hindi.

https://www.google.com.sa/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0ahUKEwiv4auR8sXOAhWGcBoKHedKB1gQFggjMAE&url=https%3A%2F%2Fwww.linkedin.com%2Fcompany%2Fsaudi-consulting-services---saud-consult&usg=AFQjCNE4YhQVOK5GHs913OuKcBYS7AQl6g

P E R S O N A L D A T A

Name Mohamed Kabeer Ahmed

Title Sr.Designer

Education Civil Designer

Registration ( 51291) Delhi, India (Roll No 537787)

Contact Phone (Mob) +966537074916

Contact Email ID [email protected]

Address Mansoor Street 9th Cross North Khobar, shamalia, K.S.A

Nationality Indian

Licence Saudi Arabia & India

Country State & City India, Tamil nadu, Chennai

Iqama Status Transferable

mailto:[email protected]

curriculum vitae

Documents