1 | P a g e

CURRICULAM VITAE

FAISAL HASAN

ASSOCIATE PROFESSOR, MECHANICAL ENGINEERING DEPARTMENT

Z H COLLEGE OF ENGINEERING & TECHNOLOGY

FACULTY OF ENGINEERING & TECHNOLOGY

ALIGARH MUSLIM UNIVERSITY, ALIGARH-202002, UTTAR PRADESH, INDIA.

Email: f.hasan.me@amu.ac.in, faisalhasan123@gmail.com

Tel. No : +91-571-2700920-Ext.1896, +91-9368682702 (cell)

Specialization and Areas of Research

Manufacturing Systems

Operations Management

Ergonomics

More than 14 years of Teaching and Research Experience (MED, AMU)

May 2016 to Till date : Associate Professor

July 2010 to May 2016 : Assistant Professor (Senior Scale)

September 2006 to July 2010 : Assistant Professor

August 2005 to May 2006 : Guest Faculty

August 2004 to July 2005 : Lecturer

November 2003 to May 2004 : Lecturer

More than three years as Teaching Assistant (MIED, IIT Roorkee)

Mechanical & Industrial Engineering Department, IIT Roorkee (January 2011-June 2014, on study leave from MED, AMU)

Industrial Experience

Trainee Engineer (Piping) in Lurgi India Pvt. Limited (Nov. 2000 to Aug. 2001).

Qualification Discipline/Subject Institute Division

Ph.D.* Reconfigurable Manufacturing Systems MIED, IIT Roorkee Awarded

M.Tech. Industrial & Production Engineering A.M.U First (Hons.)-77.22%

B.Tech. Mechanical Engineering A.M.U First (Hons.)-79.01%

S.S.S.C (XII) Science (PCM) A.M.U First-79%

S.S.C. (X) Science A.M.U First-81.4%

*Title: Some Performance Issues for a Reconfigurable Manufacturing System

COURSES TAUGHT Under Graduate Post Graduate

ME194 Manufacturing Process Lab

ME214 Manufacturing Technology

ME341 Industrial Engineering

ME340 Economics & Management

ME391 Manufacturing Technology Lab

ME447 Facilities Planning & Plant Engg.

ME621 Operation Management

ME623 Operation Research

ME693 OR and AI Lab

ME780I General Seminar

ME791I Project

ME798I Dissertation

( Ph.D, IIT Roorkee)

2 | P a g e

PUBLICATIONS (ANNEXURE-A) Research Papers

Book Chapters : 03 (Three)

International Refereed Journals : 24 (Twenty Four)

National Refereed Journals : 08 (Eight)

International Conference Proceedings : 35 (Thirty Five)

National Conference Proceedings : 09 (Nine)

Conference Proceedings Edited : 02 (Two)

Citations (As per Google Scholar) : 224 (h-index:09, i10:08)

RESEARCH/PROJECTS SUPERVISED (ANNEXURE-B) Ph.D. : 01 submitted; 03 ongoing

M.Tech. Dissertations : 12 Completed; 02 ongoing

M.Tech. Projects : 07 Completed; 01 Ongoing

B.Tech. Projects : 09 completed; 01 ongoing

RESEARCH PROPOSALS TO FUNDING AGENCIES

Investigations Pertaining to Design and Development of Reconfigurable Manufacturing System (RMS) (Rs. 20.5 Lacs) to CSIR (Ref No: 5941/NS).

Experimental Investigation pertaining to ECH. (Rs. 14.00 Lacs, Submitted to UPCST)

PATENTS PUBLISHED

Design and development of shackle free pin tumbler lock. (Journal No 25/2016 Pub date: 17/06/2016, Application No. : 201611019225)

Ignition switch operated Fuel Lock for motorcycles. (Journal No 34/2016 Pub date: 19/08/2016, Application No. : 201611026449)

INVITED LECTURES/RESOURCE PERSON 1. Invited Lecture on “Precision Manufacturing Systems” under Faculty Development Program on

Precision Manufacturing & Circular Economy, Department of Mechanical Engineering, Delhi Technological University, 7th June 2018.

2. Invited Lecture on “Manufacturing Systems: Past, Present and Future”, University Polytechnic, AMU, Aligarh, 2017.

3. Invited Lecture on “Manufacturing Systems Modelling” under STC on advances in Manufacturing, Department of Mechanical Engineering, NIT Kurukshetra, 20th October 2016.

4. Invited Lecture on “Experimental Investigations of parameters affecting ECH process” under Faculty Development Program, Department of Mechanical Engineering, MJP Rohailkhand University, Bareilly, 26th April 2016.

5. Invited Lecture on “Hybrid Machining Processes with special focus on ECH” under Faculty Development Program, Azad Engineering College, Lucknow 14th January 2016.

6. Invited Lecture on “Reconfigurable Manufacturing Systems” under Faculty Development Program, Azad Engineering College, Lucknow, 15th January 2016.

7. Invited Lecture on “Modeling of some Performance Issues for RMS” under QIP workshop on Recent Advances in Manufacturing Systems, organized by Mechanical and Industrial Engineering Department, Indian Institute of Technology Roorkee, 14th February 2015.

3 | P a g e

8. Invited to act as a Reviewer for International Conference on Emerging trends in Manufacturing, Engines and Modeling, Department of Mechanical Engineering, SVKM'S NMIMS, Mukesh Patel School of Technology Management & Engineering, 27-28th February 2015.

9. Invited to act as International Committee Chair and Reviewer for “The 2015 International Conference on Artificial Intelligence and Industrial Engineering (AIIE2015)” held at Phuket, Thailand, July 25-26th 2015.

10. Expert Member, Faculty Promotion at GLA Mathura University, 2016.

PAPERS REVIWED FOR Journal of Composite Material (SAGE)

International Journal of Production Research (Taylor & Francis)

Journal of Engineering Manufacture: Part B (SAGE)

Journal of Remanufacturing (Springer)

International Journal of Industrial & Systems Engineering (Inderscience)

International Journal of Modelling in Operations Management (Inderscience)

Arabian Journal of Geosciences (Springer)

Songklanakarin Journal of Science and Technology

MEMBERSHIP OF PROFESSIONAL SOCIETIES

Life Member of Indian Ergonomics Society, India (L125)

Associate Member, Institution of Engineers, India. (A-536871-6)

ADMISNTRATIVE RESPONSIBILITIES RENDERED (AT AMU)

Assistant Director, Directorate of School Education (DOSE), (2018)

TEQIP-II & III, Departmental Coordinator (2015 – 2018)

Member, Industry-Institute Interaction Cell (IIIC), MED (2016-till date)

Verifying Officer, M.Tech. (Mechanical) Admissions (2015-2016)

Assistant Superintendent of Examination, ZHCET(2014-2016)

Assistant Superintendent for M.Tech. Entrance Examination, MED (2015-16, 2016-17)

Scrutinizer, Department of Mechanical Engineering (2014- till date).

Verifying Officer, M.Tech. (Mechanical) Admissions (2014-2015)

Verifying Officer, B.E. Admissions (2014-2015)

Convener, Departmental Committee for student feedback analysis (2014-15)

Member, preparation and presentation committee for NBA and NAAC (2014-2015)

Member, Central Committee for TEQIP-I preparation, December 2010.

Member, Departmental Anti Ragging Committee (2009-2010).

Member Central Committee, ZHCET, NAAC (2006-2007).

Member, Departmental Committee on NAAC preparation (2006-2007).

Incharge, Conference Room and Noise and Vibration Lab, MED (2009-2010).

Scrutinizer, Department of Mechanical Engineering (2003-2010).

Verifying Officer, B.Tech and B.E. admission (2006-2010).

Course Advisor, B.Tech. (Mechanical) Program (2006-2010).

Tabulator, B.Tech (I Year), ZHCET, AMU, Aligarh. (2006-2010)

Member, College Sports Committee (2003-2010).

Warden, Nadim Tarin Hall, 2009-2010.

4 | P a g e

Assistant Superintendent (Admission Tests), CGC, AMU (2005-2006).

CONFERENCE/WORKSHOP/LECTURE ORGANIZED

Co-coordinator, 15th International Ergonomics Conference, HWWE2017.

Coordinator, Faculty development program on “Trends in Advance and Sustainable Manufacturing Technology” under TEQIP-II from 8th Feb- 12th February 2016. Mechanical Engineering Department, AMU.

Member, Organizing Committee, National Conference on Mechanical Engineering-Ideas, Innovation & Initiatives (NCMEI3), MED, AMU, Aligarh. (April 2016)

Organized Lecture on “Power Plant Familiarization” under TEQIP-II, Department of Mechanical Engineering. (7th November 2015)

Organized Lecture on “Latest Technological Evolution and Promotion of Innovation in the field of Automobile” under TEQIP-II, Department of Mechanical Engineering. (31st October 2015)

Organized lecture on “Civil services as a career option for Engineers” under TEQIP-II, Z H College of Engineering and Technology (6th September 2014).

Organizer, All India Seminar on “Ergonomics for Improved Productivity-EIP 2009”, AMU, Aligarh.

Organizer, Workshop on “Computer Integrated Manufacturing Systems (WCIMS-2009)”, AMU, Aligarh.

COMPUTER SKILLS

Designing: Auto-CAD, Microstation, PDS 3D Modeling

Design Analysis: ANSYS, CAESAR-II

Simulation: ARENA, PROMODEL, GPSS-PC

Statistical Analysis: MINITAB, SPSS

Programming: PYTHON, MATLAB, C, C++, FORTRAN

Others: MSOffice etc.

CONFERENCES ATTENDED

16th International Conference on Humanizing Work & Work Environment (HWWE-2018), College of Engineering, Trivandrum, 2018.

4th International Conference on Production & Industrial Engineering (CPIE-2016), Dr B R Ambedkar National Institute of Technology, Jalandhar, 2016.

International Conference on Advanced Production and Industrial Engineering (ICAPIE 2017), Delhi Technological University, 2017.

5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), IIT Guwahati, 2014.

International Conference on Newest Drift in Mechanical Engineering ICNDME-2014, M.M. University, Mullana, Ambala, 2014

International Conference on Design and Manufacturing (IconDM-2013), IITD&M, Kancheepuram, Chennai, 2013.

4th International & 25th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2012), Jadavpur University, 2012.

Ergonomic Research Methodologies, M.S. University, Baroda, 2009.

Humanizing Work & Work Environment (HWWE-2009), Calcutta University, Kolkatta, 2009.

Ergonomics for Improved Productivity (EIP-2009), AMU, Aligarh, 2009.

Humanizing Work & Work Environment (HWWE-2008), VIT, Pune, 2008.

5 | P a g e

Humanizing Work & Work Environment (HWWE-2007), ICAR, Bhopal, 2007.

Humanizing Work & Work Environment (HWWE-2005), IIT Guwahati, 2005.

Third Global Conference on Flexible Systems Management, JMI, New Delhi, 2004.

SHORT-TERM COURSES/TRAINING ATTENDED

Short term course on Recent Advancement in Product Design, Manufacturing and Maintenance Techniques, organized by PDPM Indian Institute of Information Technology Design and Manufacturing, Jabalpur from 16th to 20th September 2017.

TEQIP-II sponsored Faculty Development Program from 18th May to 23rd May 2015, organized by Z H College of Engineering & Technology.

UGC sponsored Subject Refresher course in computer application (Interdisciplinary) from February 26th, 2015 to March 18th, 2015, Academic Staff College, AMU, Aligarh.

Workshop on Recent Advances in Manufacturing Systems, Organized by QIP Centre and Mechanical & Industrial Engineering Department, IIT Roorkee, 2015.

Workshop on student, faculty and non-teaching staff satisfaction survey. Jadavpur University, Kolkatta (25th September 2014 under TEQIP-II).

Workshop on Advances in Joining Technologies: Friction Stir Welding (FSW), Mechanical and Industrial Engineering Department, IIT Roorkee, 2012.

Workshop on Advances in Joining Technologies: Friction Stir Welding (FSW), Mechanical and Industrial Engineering Department, IIT Roorkee (IITR), 2012.

UGC Sponsored workshop on Computer Integrated Manufacturing, MED, AMU, Aligarh, 2009.

Participated in UGC sponsored special winter school from 31st December 2008 to 21st January 2009, organized by Academic staff college, AMU, Aligarh.

UGC sponsored Subject Refresher course in computer application (Interdisciplinary) from Nov 18th, 2007 to Dec 08th, 2007, Academic Staff College, AMU, Aligarh.

Training program on Pressure Die casting organized by NSIC, Aligarh, 2004.

Workshop on Recent Advances in Hydrocarbon Technology, Department of Petroleum Studies, AMU, Aligarh, 2002.

REFERENCES

1. Dr. P.K.Jain Professor & Director Indian Institute of Technology BHU Varanasi, Uttar Pradesh, India. Email: pjainfme@iitr.ac.in

2. Dr. Zillur Rehman Professor and Head Department of Management Studies (DoMS) Indian Institute of Technology Roorkee, Roorkee-247667, Uttarakhand, India.

(FAISAL HASAN)

6 | P a g e

ANNEXURE-A

RESEARCH/PROJECTS SUPERVISED

S.No. Title

1

2

Ph.D.

Ph.D.

Reconfiguration Planning for Manufacturing Systems

Masood Ashraf (AMU, Thesis submitted)

Modelling of scheduling strategies for RMS

Amit Gupta (PTU, Jalandhar, Ongoing)

3. Ph.D. Surface Modification of Cast Aluminum Alloys using FSP.

Zaid Abdulwahed (AMU, Ongoing)

4. Ph.D. Development and analysis of ankle foot orthosis by additive manufacturing

Falah Hasan Abdul Sadah (AMU, Ongoing)

S.No. Title

1 M.Tech AI enabled AGV control for Manufacturing Systems

Saiful Wali Khan (Ongoing)

2 M.Tech Effect of Ti Reinforcement on Mechanical properties of Mg cast alloy using FSP

Naiyyar Kalam Khan (Ongoing)

3 M.Tech Behaviour of Particle Impact on the Substrate in Cold Gas Dynamic Spray: A Numerical Simulation.

Md. Abdul Faheem (2018)

4 M.Tech Ergonomic Intervention for chaff cutting task.

Samiullah Ansari (2018)

5 M.Tech Optimization of WEDM process parameters while machining Aluminum Foam using ANN.

Ghanshyam Bansal (2018)

6 M.Tech Surface modification of Aluminum Alloy 6063 by SiC powder through FSP.

Ali Nawaz (2017)

7 M.Tech Development of orthopedic implant using Reverse Engineering Approach.

M.Faisal Noor (2017)

8 M.Tech ECH of External Cylindrical Surfaces

M.Musheer (2017)

9 M.Tech Multi objective optimization of Performance parameters in RMS using Particle Swarm Optimization

Zeeshan Shaheni (2015)

10 M.Tech Multi objective optimization of Performance parameters in RMS using NSGA-II and TOPSIS.

Mohd. Ahsan Khan (2015)

11 M.Tech Evaluation and Design of Screw Driver

Asmaar Husain (2010)

12 M.Tech Reduction for the hand arm vibration induced stresses using chipping hammer

Kamran Haider Zaidi (2010)

13 M.Tech A study on the performance of pseudo-paced production lines

Mohammad Asjad (2007)

14 M.Tech Evaluation of DA and ANN data classification techniques

Mukesh Kumar Garg (2005)

7 | P a g e

S.No. Title

1 B.Tech Experimental Investigation on µFSW of Magnesium based alloys.

Asim Siddiqui, Shadab Alam, Md. Salman Alam (Ongoing)

2 B.Tech Study of mechanical properties & microstructure of Al-Ni-SiC composite by conventional sintering process (2018).

Mohammed Aamer, Aijaz Uddin, Mohammad Ishan

3 B.Tech Product Recovery by Metal deposition and Electrochemical Honing Process (2018)

Abdul Rehman, Amjad Ali, Mohd. Fareed

4 B.Tech Improved design of Fodder Cutter machine (2017)

Ashish Kumar Singh, Kanak Singhal, Saiful Wali Khan

5 B.Tech Lock redesign with reduced cost and better safety consideration (2016)

Mohammad Rafiq Saifi, Mohd. Shah Faizan, Mohammad Rehan

6 B.Tech Part family formation based on operations sequence for Reconfigurable Manufacturing System (2015)

Shivani Upadhyay, Faisal Noor, Ahmad Mehmood

7 B.Tech Assessment of hand arm vibration using hand drill machine (2009)

Zeeshan Alam, Faraz Khan, Mohd. Saquib

8 B.Tech Ergonomic evaluation of hand held saw handles (2007)

Antariksh Bhardwaj, Rajat

9 B.Tech Throughput prediction of seven stations unpaced production line using ANN (2005)

Imroz, Aamir Rehmani, Mudassir

10 B.Tech Buffer optimization of five stations unpaced production line using ANN (2003) Mohd. Waseem, Farman Ilahi, Abhinav, Ashu Sharma

8 | P a g e

ANNEXURE-B (RESEARCH PUBLICATIONS)

BOOK CHAPTERS/CONFERENCE PROCEEDINGS (EDITED)

1. Ashraf, M., Hasan, F., Murtaza, Q. Optimum Machines Allocation in a Serial Production Line Using NSGA-II and TOPSIS, Chapter 15, In S. S. Pande and U. S. Dixit (eds.), Precision Product-Process Design and Optimization, Lecture Notes on Multidisciplinary Industrial Engineering, 2018, Springer.

2. Muzammil, M., Khan, A.A., Farooq, M., Hasan F. Edited, Proceeding of 15th International Ergonomics Conference HWWE-2017, “Ergonomics for Improved Productivity” organized by Department of Mechanical Engineering, AMU, Aligarh., India.

3. Hasan, F., Jain, P.K., and Dinesh, K. Performance Issues in Reconfigurable Manufacturing System. Chapter 24 in DAAAM International Scientific Book 2014, pp. 295-310. Published by DAAAM International, ISBN 978-3-901509-98-8, ISSN 1726-9687, Vienna, Austria.

4. Hasan, F., Jain, P.K., and Dinesh, K. Throughput Model for Coupled Reconfigurable Product Line, Chapter 09 in DAAAM International Scientific Book 2012, pp. 095-106. Published by DAAAM International, ISBN 978-3-901509-86-5, ISSN 1726-9687, Vienna, Austria.

5. Muzammil, M., Khan, A.A., Hasan F., Farooq, M. Edited, Proceeding of All India Seminar on “Ergonomics for Improved Productivity-EIP 2009” organized by Ergonomics Research Division, Department of Mechanical Engineering, AMU, Aligarh., India.

INTERNATIONAL JOURNALS

6. Ashraf, M., Hasan, F., Configuration election for a reconfigurable flow line involving part production with operations constraints. International Journal of Advanced Manufacturing Technology, 2018.

7. Asjad M, Hasan, F., A comparative study of classifier techniques for lift index data analysis, Benchmarking, Vol. 25(2), 2017, pp. 632-641.

8. Jain, S., Niranjan, N., Hasan, F., Kumar, A. An Integrated Reverse Engineering and rapid prototyping approach towards reconstruction of damaged impeller. Industrial and Systems Engineering, Vol 23(4), 2016, pp. 393-404.

9. Hasan, F., Jain, P.K. A Neural Network Based Approach for Part Family Classification for a Reconfigurable Manufacturing System. Operational Research, Vol. 25(2), 2016, pp. 143-167.

10. Hasan, F., Jain, P.K. and Kumar, D. Scalability of reconfigurable manufacturing systems based on bowl phenomenon: an implication of modular machines. Industrial and Systems Engineering. Vol. 22(1), 2016, pp. 73-95.

11. Masood, A., Hasan, F. Product Family Formation based on Multiple Product Similarities for a Reconfigurable Manufacturing System, Modeling in Operations Management. Vol. 5(3/4), 2015, pp. 247-265.

12. Mehmood, A., Noor, M.F., Upadhyay, S., Hasan, F., Masood, A. Part Family Formation using Skip Moves and Lazy Machines in a Reconfigurable Manufacturing System, Modeling in Operations Management. Vol. 5 (3/4), 2015, pp. 196-208.

13. Hasan, F., Jain, P.K., Genetic Modeling for Selecting Optimal Machine Configurations in Reconfigurable Manufacturing System. Applied Mechanics and Materials, Vol. 789-790, 2015, pp 1229-1239

9 | P a g e

14. Hasan, F., Jain, P.K. and Kumar, D. Prediction of Machine Reconfigurability using Artificial Neural Network for a Reconfigurable Serial Product Flow Line. Industrial and Systems Engineering. Vol. 18(3), 2014, pp. 283-305.

15. Hasan, F., Jain, P.K., and Kumar, D. Optimum configuration selection in Reconfigurable Manufacturing System involving Multiple Part Families. OPSEARCH, Vol. 51(2), 2014, pp. 297-311.

16. Hasan, F., Jain, P.K. and Kumar, D. Performance Modeling of Dispatching Strategies under Resource Failure Scenario in Reconfigurable Manufacturing System. Industrial and Systems Engineering, Vol. 16(3), 2014, pp. 322-333.

17. Hasan, F., Jain, P.K., and Dinesh, K. An Approach towards Scalability for Reconfigurable Product Flow Line through Unbalancing. Modeling in Operations Management. Vol. 3(2), 2013, pp. 118-133.

18. Hasan, F., P.K. Jain, Dinesh, K., Service Level as Performance Indicator for Multiple Part Families in a Reconfigurable Manufacturing System. Journal of Mechanical Engineering and Sciences (JMES), Vol. 5, 2013, pp. 709-719.

19. Husain, A., Khan, A.A., Hasan, F. Ergonomic evaluation of effects of handle shape and task orientation on human performance in screw driving task. International Journal of Advancements in Technology 4 (1), 2013, pp. 105-114.

20. Muzammil, M., Ahmad, S., Khan, A.A., and Hasan, F. Design of a workstation and its evaluation under the influence of noise and illumination for an assembly task. WORK: A Journal of Prevention, Assessment & Rehabilitation (IOS Press, Netherlands), Vol 39(1), 2011, pp. 3-14.

21. Muzammil, M., Singh, R., Ahmad, S., Hasan, F. Effects of vibration push force, exposure duration and working posture on operators performing a grinding task. Occupational Ergonomics, Vol 9, 2010, pp. 13-26,.

22. Muzammil, M., Khan, A.A., Hasan, F. An experimental investigation of the effect of Noise and Heat on operators working in a die casting industry. Occupational Ergonomics, Vol. 7(4), 2007, pp. 1-13.

23. Muzammil, M., Hasan, F. Vibration Effects on Cognitive Task Performance in a Rural Road Automobile Driving Environment. Noise and Vibration Worldwide, Vol.38 (5), 2007, pp 11-19.

24. Muzammil, M., Gupta, A.K., Farooq, O., Hasan, F. Design of Active Noise Control System Using Phase Shift Network for a Hydraulic Surface Grinder. Low Frequency Noise, Vibration & Active Control. Vol 25(1), 2006, pp.55-61.

25. Muzammil, M., Hasan, F. Human performance under the impact of continuous and intermittent noise in a manual machining task. Noise & Vibration Worldwide, Vol. 35(7), 2004, pp. 10-15.

26. Muzammil, M., Siddiqui, S.S., Hasan, F. Investigation pertaining to tractor drivers performing ploughing operation under the impact of vibration. Occupational Health, Vol. 46(5), 2004, pp. 401-409.

27. Muzammil, M., Khan, I.A., Hasan, F. Effects of vibration, feed force and exposure duration on operators performing drilling task. Human Ergology, Vol. 32, 2003, pp. 77-86.

INTERDISCIPLINARY RESEARCH (INTERNATIONAL JOURNALS)

28. Khan, M.Y.A., Tian. F., Hasan, F., Chakarapani, G.J., Artificial neural network simulation for prediction of suspended sediment concentration in the River Ramganga, Ganges Basin, India. International Journal of Sediment Research. 2018.

10 | P a g e

29. Khan, M.Y.A, Hasan, F., Panwar, S., Chakarapani, G.J., Neural network model for discharge and water level prediction for Ramganga river catchment of Ganga Basin, India. Hydrological Sciences Journal, Vol. 61(11), 2016, pp. 2084-2095.

NATIONAL JOURNALS

30. Hasan, F., P.K. Jain, Dinesh, K., Production rate and availability considerations for reconfigurable manufacturing system under degraded performance mode. Journal of the Association of Engineers, Vol. 84(1-2), 2014, pp. 17-26.

31. Muzammil, M., Hasan, F., Ahmad, S. Manual load lifting performance under varying load and posture in a lock manufacturing unit. Journal of Industrial Engineering, 11 (6), 2009, pp. 26-28.

32. Muzammil, M., Hasan, F., Ahmad, S. Assessment of pulmonary functions of industrial workers exposed to machine noise. Environmental Pollution Control Journal, Vol 10(3), 2007, pp. 22-29.

33. Muzammil, M., Rizvi, S.A.H., Hasan, S.N., Hasan, F. Anthropometric data with special reference to the Indian needs – An overview. Journal of Production Engineering, Institution of Engineers, Vol 87, 2007, pp. 14-19.

34. Muzammil, M., Gupta, A.K., Farooq, O., Hasan, F. Single Speaker Based Active Noise Control System for a Hydraulic Surface Grinder. Environmental Pollution Control Journal, Vol. 9(6), pp. 14-19, 2006.

35. Muzammil, M., Khan, A.A., Hasan, F., Hasan, S.N. Effect of noise on human performance under variable load in a die casting industry – A case study. Journal of Environmental Science and Engineering, Vol. 46(1), 2004, pp. 49-54.

36. Hasan, F., Muzammil, M., Suhail, A. Effect of coefficient of variation on throughput of three stations unpaced production system. Journal of Production Engineering, Institution of Engineers, Vol. 85, 2005, pp. 60-63.

37. Muzammil, M., Hasan, F., Hasan, N. Effect of vibration on readability task performance in a cityway driving environment. Environmental Pollution Control Journal, Vol. 7(1), 2003, pp.65-67.

INTERNATIONAL CONFERENCES

38. Samiullah, A., Hasan, F., Bhardwaj, S., Upadhyay, V., Ergonomic Assessment of Chaff Cutting Task using Conventional Cutter. HWWE2018, COE Trivandrum, 2018.

39. Falah, H., Murtaza, Q., Hasan, F., Improvement in Gait Cycle with Ankle Foot Orthosis. HWWE2018, COE Trivandrum, 2018.

40. Shafiq, S.I., Hasan, F., Analysis of Whole Body Vibrations and Hand Arm Vibration in Tampering Machine. HWWE2018, COE Trivandrum, 2018.

41. Ashraf, M., Hasan, F., Mathematical Modelling of a Comprehensive Similarity Coefficient for Reconfigurable Manufacturing Systems. International Conference on Advances and Soft Computing Applications in Design and Manufacturing (ASCADM–2018), NIT Patna, 2018.

42. Chirag, S., Murtaza, Q., Parvej, Hasan, F., Structural and Mechanical Properties of Microwave Hybrid Sintered Aluminium Silicon Carbide Composite. Advances in materials and Processing technologies Conference VIT University, Chennai. 2017.

43. Nawaz, A., Falah, H., Murtaza, Q., Hasan, F., Hussain, T., Parvej. Surface Modification of Aluminum Alloy 6063 by Silicon Carbide Powder (SiC) through FSP. Advances in materials and Processing technologies Conference 2017, VIT University, Chennai, 2017

11 | P a g e

44. Badremanir K., Ravi K., Upadhyay, V., Hasan, F., Moisture Absorption Behavior of Jute Fiber-Fly Ash Mixed Epoxy Composite, Recent Advances in Mechanical Engineering (NCRAME 2017)

45. Noor M.F., Hasan, F., Bhardwaj S., Hasan, S., Reverse Engineering in Customization of Products: Review and Case Study. HWWE2017: Ergonomics for Improved Productivity, AMU, Aligarh.

46. Kumar, A., Hasan, F., Mittal, A., 3D scanning and Free Form Manufacturing for Biomedical Applications: Current Capabilities & Challenges. HWWE2017: Ergonomics for Improved Productivity, AMU, Aligarh.

47. Hasan, F., Murtaza, Q., Hasan, F., Parvez, M., Vibration Analysis of Custom Ankle Foot Orthosis (AFO) for Drop Foot Patients. HWWE2017: Ergonomics for Improved Productivity, AMU, Aligarh.

48. Hasan, F., Murtaza, Q., Hasan, F., Bhardwaj, S., Khalaf, M.A., Mohsen, I.A., Design and Analysis of Partial Right Foot Chopart Socket Prosthesis. HWWE2017: Ergonomics for Improved Productivity, AMU, Aligarh.

49. Khan, S.W., Singhal, K., Singh, A.K., Hasan, F., Ashraf, M., Ansari, S., Design of Chaff Cutting Machine. HWWE2017: Ergonomics for Improved Productivity, AMU, Aligarh.

50. Ansari, S., Hasan, F., Khan, S.W., Bhardwaj, S., Ergonomic Evaluation of Fodder Cutting Task. HWWE2017: Ergonomics for Improved Productivity, AMU, Aligarh.

51. Rahman, Z., Muzammil, M. and Hasan, F. Design and Simulation of an Egg Crate. International Conference on Innovative Product Design & Development, Alfalah University, April 20, 2017.

52. Ashraf, M, Khan, M.A., Hasan, F., Siddiqui, M.I.H, Murtaza, Q., Ali, S.N., Optimum Allocation of Machines with Multiple Objectives using NSGA-II, AIMTDR-2016, College of Engineering, Pune, India, 2016.

53. Ashraf, M., Hasan, F., Siddiqui, M.I.H., Grouping of Part/Product Variants Based on Operation Sequence Similarity, ICAPIE-2016, Delhi Technological University, Delhi, 2016.

54. Sufian, R., Hasan, F., Ansari, A.H., Effect of Friction Stir Welding on the hardness of Al-6061 T6 Aluminium Alloy, ICAPIE-2016, Delhi Technological University, Delhi, 2016.

55. Ashraf, M., Hasan, F, A Comprehensive Approach For Part Family Formation Using Production Similarities, CPIE-2016, NIT Jalandhar, Jalandhar, India, 2016.

56. Hasan, F., Jain, S. Configuration Selection for Optimal Throughput from a Reconfigurable Manufacturing Line using Genetic Algorithm. XVIII Annual International Conference of the Society of Operations Management, IIT Roorkee, 2014.

57. Hasan, F., Jain, P.K., Dinesh, K. Performance based optimal machine assignment in Reconfigurable Manufacturing System using genetic algorithm. 5th International and 26th All India Manufacturing Technology, Design and Research Conference, AIMTDR-2014, IIT Guwahati, 2014.

58. Shaheni, Z., Hasan, F., Khan, M.A. Simulation Modeling of Scheduling Strategies for a Manufacturing System. International Conference on Newest Drift in Mechanical Engineering ICNDME-2014, M.M. University, Mullana, Ambala, 2014.

59. Khan, M.A., Hasan, F., Shaheni, Z. Part Family Formation Based on Operation Sequence in RMS. International Conference on Newest Drift in Mechanical Engineering ICNDME-2014, M.M. University, Mullana, Ambala, 2014.

60. Hasan, F., Jain, P.K. and Kumar, D., Machine Reconfigurability Models Using Multi-Attribute Utility Theory and Power Function Approximation. Proceedia Engineering, Vol. 64, 2013, pp. 1354-1363.

12 | P a g e

61. Husain, A., Khan, A.A., Hasan, F., EMG activities in screw driving regarding handle shape and work surface orientation. 2nd International Conference on Emerging Trends in Engineering & Technology, College of Engineering, Teerthanker Mahaveer University. April12, 13, 2013

62. Hasan, F., P.K. Jain, Dinesh, K. Impact of Modular Component Design on Performance of a Reconfigurable Manufacturing System. 4th and 25th All India Manufacturing Technology, Design and Research Conference, AIMTDR-2012, Jadavpur University, 2012.

63. Hasan, F., Jain, P.K. and Kumar, D. Performance Modeling of Reconfigurable Manufacturing System for Different Dispatching Strategies Under Exception. IEEE conference on Industrial Engineering and Engineering Management., Hong Kong, 2012.

64. Singh, J., Khan, A.A., Muzammil, M. and Hasan, F. The Effect of Body Mass on Transfer of Vibration in Hand Arm System. HWWE 2009, Calcutta University, Kolkatta, 2009.

65. Muzanmmil, M., Ahmad, S., Hasan, F., Farooquie, P. Effect of Noise and Illumination on Task Performance of Workers of Varying Age Groups in an Assembly Task. HWWE 2008, VIT Pune, 2008, India.

66. Hasan, F., Muzammil, M., Ahmad, S. Ergonomic Evaluation of Carpentry Saw Handle. HWWE 2008, VIT Pune, 2008, India.

67. Ahmad, S., Hasan, F., Muzammil, M., Hasan, N. The Effect of Gender, Text and Background Color on the Readability of Web Page. HWWE 2008, VIT Pune, 2008, India.

68. Muzammil, M., Hasan, F., Ahmad, S. Effect of vehicular vibration on two wheelers drivers- An ergonomic study. International Ergonomics Conference, (HWWE-2007), ICAR, Bhopal, 2007, India.

69. Muzammil, M., Siddiqui, F., Hasan, F. Effect of Effect of Environmental Stressors (Noise & Illumination) on Operators Performing Manual Machining Operations. International Ergonomics Conference, (HWWE-2005), IIT Guwahati, 2005, India.

70. Muzammil, M., Ahmad, S., Hasan, F. Ergonomic Evaluation of Manual Load Lifting in a Lock Manufacturing Industry. International Ergonomics Conference, (HWWE-2005) IIT Guwahati, 2005, India.

71. Hasan, F., Muzammil, M., Suhail, A. A neural network based approach for evaluating the throughput of an unpaced production line. 21st International Manufacturing Conference, University of Limerick, 2004, Ireland.

72. Muzammil, M., Hasan, F., Hasan, S.N. Controller unit program of an active noise control system. Third Global Conference on Flexible Systems Management (GLOGIFT), 2004, New Delhi.

73. Hasan, F., Muzammil, M., Athar, S.M. ANN – A powerful tool for solving complex industrial problems. Third Global Conference on Flexible Systems Management (GLOGIFT), 2004, New Delhi.

NATIONAL CONFERENCES

74. Samiullah, A., Hasan, F., An Analytical Approach for Fabrication of Mold Cavity Using Reverse Engineering, International Conference on Advanced Production and Industrial Engineering (ICAPIE), DTU, Delhi, 2017

75. Faizan, S.M., Rehan, M., Saifi, M.R., Hasan, F. Automated Submersible Pump with Water Level Indicator: A Concept. National Conference on Mechanical Engineering: Ideas, Initiatives and Innovations, AMU, Aligarh, 2016.

76. Masood, A., Hasan, F. Product Family Formation for RMS: A Review. National Conference on Mechanical Engineering: Ideas, Initiatives and Innovations, AMU, Aligarh, 2016.

13 | P a g e

77. Zaidi, K.H., Khan, A.A., Hasan, F., Muzammil, M. Subjective evaluation of human performance while using chipping hammer. National conference on Advances in Mechanical Engineering, AMU, Aligarh, 2010.

78. Zaidi, K.H., Khan, A.A., Muzammil, M., Hasan, F. Study of Hand arm vibrations using Chipping Hammer. Ergonomics Research Methods, MS University, Baroda, 2009.

79. Alam, Z., Saqib, Khan, F., Hasan, F., Khan, A.A., and Muzammil, M. Assessment of Hand-Arm Vibration on Worker using Hand Held Drill. All India Seminar on Ergonomics for Improved Productivity (EIP2009), AMU, Aligarh.

80. Khan, M.A., Zaidi, S.K.H., Muzammil, M., Hasan, F and Ahmad, S. Anthropometric Survey for Designing a Simple Seating System for North Indian Population. All India Seminar on Ergonomics for Improved Productivity (EIP 2009), AMU, India.

81. Shamim, F.A., Khan, D.A., Muzammil, M., Ahmad, S and Hasan, F. Anthropometric Data Pertaining to North Indian Population for Tractor Seat Design. All India Seminar on Ergonomics for Improved Productivity (EIP 2009), AMU, India.

82. Nath, S., Murshid, M., Muzammil, M., Ahmed, S and Hasan, F. Study of Temperature Effect on Tyre-Road Noise. All India Seminar on Ergonomics for Improved Productivity (EIP 2009), AMU, India.

83. Muzammil, M., Gupta, A.K., Omar, F., Hasan, F. Reduction of noise from a hydraulic surface grinder using active noise control technique. National Symposium on Acoustics (NSA-2006), 2006, New Delhi, India.