1

Current standards – container glass

August 2019

2

Current Glass Container Standards and Guidelines (Excludes Flat Glass Standards)

August 2019

CONTENTS PAGE No British Glass Publications 2 British Standards (BS) 4 British-European Standards (BS EN) 10 British, European, International Standards (BS EN ISO) 17 British/International Standards (BS ISO) 20 International Standards (ISO) 24 American Standards (ASTM) 26 German Standards – DIN 30 Pharmacopoeia 31

3

British Glass Publications

TITLE PRICE TEC 3: Glass Container Finishes £150.00 Scope: Containing the neck finish specifications for the most (non-member) commonly produced glass containers in Europe. FREE to members Available on Memory Stick, or Members’ can download a copy from the British Glass Website (Members’ Area) www.britglass.org.uk Current version: Revised Autumn 2014 (electronic) TEC 4: Glass Container Tolerances £30.00 Scope: Guidance to packers and glass container manufacturers (non-member) regarding the dimensional of capacity tolerances which FREE to members can be economically achieved during the automatic production of glass containers. Current version: 2011 (electronic) TEC 5: Quality Assurance and Quality Control within a Glass £30.00 Container Manufacturing Company (non-member) Scope: The purpose of this publication is to set down concisely, FREE to members if not in absolute detail, the aims of glass container manufacturers in the field of quality control and quality assurance and to give some indication of how these aims are achieved in practice. Current version: to be released 2012 (electronic) TEC 6: Accurate Determination of Glass Container Capacity £30.00 Scope: Factors are given in accordance with those commonly used (non-member) in the UK by glass manufacturers, customers, glass users FREE to members and legislative authorities. For practical purposes, they also give similar results to those obtained using the conversion factors recommended by CETIE in Data Sheet DT9. Current version: 1994 (electronic) TEC 7: Strength and Performance Standards for the £30.00 Manufacture and Use of Carbonated Beverage Bottles (non-member) Scope: Gives guidance to bottlers, packers, merchants and users FREE to members Of glass containers for carbonated beverages. Current version: 2012 (electronic) TEC 9: General Guidelines for the Use of Glass Containers £30.00

4

Scope: Guidance for manufacturers bottlers, packers, merchants and (non-member) users of glass containers. FREE to members Current version: 2009 (electronic and booklet) TEC 11: General Information on the Packing of Glass £30.00 Containers for their Safe Transport and Delivery to Customer (non-member) Current version: 1998 (electronic and booklet) FREE to members Digest of Information and Patent Review £150.00/pa Scope: A quarterly abstracts bulletin covering all aspects of glass (non-member) manufacture in all sectors, from technical production data to FREE to members marketing, legislative information, standards (international and EU). Copies of any articles listed in the Digest can be obtained for members. (subject to usual copyright rules). [British Glass] Health and Safety Guidance Guidance – Managing Working in Elevated Temperatures FREE to members Email: p.marsh@britglass.co.uk Code of Practice – Glass Forming I.S. Machines FREE to members Email: p.marsh@britglass.co.uk To order copies of any of the above, or for more information, please contact: t.daramola@britglass.co.uk

5

British Standards (BS)

British Glass hold most of the standards listed below in their archives and members’ can loan these upon request. New standards are indicated in red. However, should you need to purchase a copy for yourselves, the majority of the standards listed below can be purchased and downloaded immediately from the British Standards Institute: http://shop.bsigroup.com/ BS 572: 1985 (1997) – Specification for interchangeable conical ground glass joints BS 795: 1983 – Specification for ampoules Replaced by BS EN 9187-1: 2010 Injection equipment for medical use. ampoules for injectables BS 870: 2008 – Specification for external micrometres Replaced by BS EN ISO 3611: 2010 BS 873: 1987 (1996) – Replaced by BS 8442:2015 Miscellaneous road traffic signs and devices. Requirements and test methods BS 907: 2008 – Specification for dial gauges for linear measurement (incorporating corrigendum no 1) SUPERCEDED BY: BS EN ISO 463:2006 (published 2008) replaces BS 907: 2008, which remains current. BS 1133: Packaging Code – Section 18: 1991 - Packaging in glass –WITHDRAWN BS 1217: 1998 – Materials and articles in contact with foodstuffs. test methods for water absorption of ceramic articles BS 1679: Containers for pharmaceutical dispensing Part 5: 1973 (1994) - Eye dropper bottles Part 6: 1994 – Specification for glass medicine bottles Part 7: 1968 (1977) – Ribbed oval glass bottles Part 8: 1992 Specification for glass and plastics containers for solid dosage forms, semi-solids and powders BS 1777: 1981 (1992) – Specification for glass honey jars Withdrawn – cross-references: BS 1918: Part 1, BS 6001 BS 1796: Test sieving Part 1: 1989 (1994) – Methods using test sieves of woven wire cloth and perforated metal plate BS 1918: - Glass container finishes Part 1: 1978 (1989) – Specification for continuous thread finish – current, confirmed 2008 Part 2: 1981 (1992) – Specification for crown finish –Withdrawn cross-references BS 4602

6

BS 1922:1987+A2:2011 - Specification for glass dispensing measures for pharmaceutical purposes. BS 2021: 1980 (1992) – Specification for separating and dropping funnels for laboratory use - Replaced by BS ISO 4800: 1998 BS 2069: 1954 (1992) – Specification for gas sampling tubes (confirmed current, under review) BS 2649: Methods for analysis of glass Part 1: 1988 (1993) – Glasses of the soda-lime-magnesia-silica type Withdrawn but cross-references: BS 1752, BS 3591, BS 3978 Part 2: 1957: Recommended procedure for the analysis of soda-boric oxide-alumina-silica glasses of high silica and boric oxide content Withdrawn but cross-references: BS 612, BS 700, BS 846, BS 1583, BS 1739, BS 1752, BS 1792, BS 1923 Part 3: 1988 (1993) – Glasses of the potassium oxide-lead oxide-silica type Withdrawn but cross-references: BS 1752, BS 3828, BS 3978 BS 2734: 1997 – Specification for narrow-necked boiling flasks BS 2761: 1983 (1994) – Specification for spherical ground joints WITHDR, but cross-references: BS 1134: Part 1, ISO 468, CS21-58 BS 2975: -1 2004 – Methods for Sampling and Analysis of Glassmaking Sands Methods for sampling and physical testing of glass-making sands BS 2975- 2: 2008 - Sampling and Analysis of Glass-making sands. Methods for Chemical Analysis BS 3062: 1985 (1990)– Specification for ophthalmic lens materials Withdrawn but cross-references: BS 2782: Part 5: Method 530A, ISO 7944 BS 3108: 1980 (1993) – Specification for limestone for making colourless glasses Withdrawn cross references: BS 410, BS 3978 BS 3414: 2000 – Specification for hand-held crown bottle openers Withdrawn cross-references: BS EN ISO 6507-1:1998 BS 3423: 1986 – Recommendations for design of glass vacuum vessels (including desiccators) for laboratory use (confirmed, under review) BS 3447: 1962 (1997) – Glossary of terms used in the glass industry Withdrawn cross-references: BS 952, BS 1133: Section 18, BS 3130: Part 3, BS 3446, ISO/DIS 4791.2, ISO/DIS 7348 BS 3463: 1975– Specification for observation and gauge glasses for pressure vessels BS 3473: 1991 Chemical resistance of glass used in the production of laboratory glassware

7

Part 1: 1991 – method for determination of resistance of glass to attack by a boiling aqueous solution of mixed alkali Part 2: 1987 – method for determination of hydrolytic resistance of glass grains at 98oc Part 3: 1987 – method for determination of hydrolytic resistance of glass grains at 121oc Part 4: methods for determination of hydrolytic resistance of the interior surfaces of glass containers Part 4: section 4.1:1989 determination by titration method and classification – Replaced by BS ISO 4802-1: 2016 Part 4: Section 4.2: 1989 (1994) Determination by flame photometry and classification - Replaced by BS ISO 4802-2: 2016 Part 5: 1987 (1993) Method for determination of resistance of glass to attack by 6 mol/l hydrochloric acid at 100oC BS 3507: 1999 - Laboratory glassware – pyknometers BS 3517: 1991 – Methods for thermal shock tests on laboratory glassware BS 3828: 1973 – Specification for crystal glass (current, under review) BS 3900: 1986 Colour calculation (methods of test for paints) part D10: determination of colour and colour difference: calculation BS 4110: 1999 – Visors for vehicle users (current, under review) BS 4602: 1977– Specification for the use of metric units in specifications for glass containers and finishes (current, under review) BS 5586: - Sensory analysis apparatus Part 1: 1978– Specification for wine-tasting glass BS EN 71-1:2014 Safety of toys. Mechanical and physical properties (current, work in hand) BS 5732: 1985– Specification for glass disposable pasteur pipettes BS 5771: 1981– Specification for packages for certain pre-packed foodstuffs: capacities of glass and metal containers BS 5895: 1980– Specification for borosilicate glass tubing for laboratory apparatus BS 5922: 1980 – specification for glass condensers for laboratory use BS 5928: 1980 (1993) – Specification for bottles for laboratory use Withdrawn Replaced by: BS EN ISO 4796-1:2016

8

BS 6039: 1981 (1993) – Specification for dental glass ionomer cements Withdrawn Replaced by: BS EN ISO 9917-1:2007 Dentistry. Water-based cements. Powder/liquid acid-base cements BS 6070: Methods of sampling and test for sodium carbonate (soda ash) for industrial use Part 0: 1981 General introduction Part 1: 1981 Determination of total soluble alkali content Part 2: 1982 Determination of chloride content Part 3: Determination of non-volatile matter Withdrawn cross-references: BS 6070: Part 0, BS 6070: Part 1, BS 6070: Part 2, BS 6070: Part 4, ISO 739, ISO 741, ISO 743, ISO 744 Part 4: 1981 Determination of matter insoluble in current water Part 5: 1981 Determination of sulphate content Part 7: 1981 Determination of copper content BS 6075: 1997 – Methods of sampling and test for sodium hydroxide for industrial use BS 6088: 1981 Specification for solid glass beads for use with road marking compounds and for other industrial uses Withdrawn Replaced by: BS EN 1423:2012 Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two BS 6106: 1981 (1992) – Specification for 1 Pint (568ml) multi-trip glass bottles for pasteurized milk (current, under review) BS 6117: 1981 (1986) – Specification for glass bottles for light wine Withdrawn cross-references: BS 6001 (75/107/EEC) BS 6118: 1981 – Specification for multi-trip glass bottles for beer and cider BS 6119: - Glass bottles for carbonated soft drinks Part 1: 1981 – specification for 750ml and 1-litre multi-trip bottles BS 6711: - Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica Part 1: 1986 – Names for items of apparatus (in English, French, German and Russian) BS 6748: 1986 +A1 2011 – Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware BS 6898: 1987 – Specification for glass centrifuge tubes for general laboratory use (under review) BS 6920-1:2014 Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Specification

9

BS 7030: 1988 – Method for the determination of the coefficient of mean linear thermal expansion of glass BS 7034: - Viscosity and viscometric fixed points of glass Part 1: 1988 – Recommendations for use in the determination of viscosity and viscometric fixed points Part 2: 1988 – Method for the determination of viscosity by rotation viscometers Part 3: 1988 – Method for the determination of viscosity by fibre elongation viscometer Part 4: 1988 – Method for the determination of viscosity by beam bending Part 5: 1988 – Method for the determination of working point by sinking bar viscometer Part 6: 1988 – Method for the determination of softening point Part 7: 1988 – Method for the determination of annealing point and strain point by beam bending Part 8: 1988 – Method for the determination of (dilatometric) transformation temperature BS 7367: 1991 – Specification for manufacture of glass bottles for carbonated soft drinks including carbonated water BS 7373: 2001 Part 2: Product specifications – guide to identifying criteria for a product specification and to declaring product conformity. BS 7479: 1991 (ISO 9227: 1990) – Method for salt spray corrosion tests in artificial atmospheres Withdrawn replaced by: BS EN ISO 9227:2012 Corrosion tests in artificial atmospheres. salt spray tests BS 7488: 1991 – Recommendations for handling glass bottles, containing carbonated soft drinks or carbonated water, in filling plants, warehouses, and retailers’ premises BS 7603: 1992 – Method for determination of stresses in glass-to-glass sealings BS 7604: - Method for determination of stress-optical coefficient of glass Part 1: 1992 - Tensile strength Part 2: 1992 – Bending test

10

BS 7652: - Prefilled syringes Part 1: 1993 – Specification for glass cylinders for dental local anaesthetic cartridges. Withdrawn- Replaced by BS ISO 11040-1:2015 Prefilled syringes. Glass cylinders for dental local anaesthetic cartridges BS 7908: 1999 – Packaging – temperature and time-temperature indicators – performance specification and reference testing Withdrawn Replaced by Draft 96/540311 DC BS 7966: 2000 – Recommendations for design of cork removal devices. Withdrawn replaced by BS EN 14887:2005. Glass packaging. cork removal devices. general requirements. BS 8404: 2001 – Packaging – Child resistant packaging – requirements and testing procedures for non-reclosable packages for pharmaceutical products Withdrawn Replaced by BS EN 14375:2016 - Child-resistant non-reclosable packaging for pharmaceutical products. Requirements and testing BS 8555:2016 - Environmental management systems. Phased implementation. Guide. BS 8654: 2015 – Domestic and hospitality use ceramic tableware articles intended for contact with foodstuffs – Specification BS PAS 54: 2003 – Specification for domestic ceramicware and glassware – articles intended for contact with foodstuffs, and vases BS PAS 101: 2003 – Recovered container glass (cullet) – specification for quality and guidance for good practice in collection Available from WRAP (not BSI) – www.wrap.org.uk BS PAS 102: 2004 – Process for processed glass for selected secondary end markets Available from WRAP (not BSI) – www.wrap.org.uk

11

British-European Standards (BS EN)

BS EN 71-1:2011 Safety of Toys. Mechanical and physical properties (current, work in hand) BS EN 71-3:2013+A1:2014 Safety of Toys. Migration of certain elements (current, work in hand) BS EN 376: 2002 – Information Supplied by the Manufacturer with in vitro diagnostic reagents for self-testing Withdrawn Replaced by BS EN ISO 18113-4:2011 BS EN 450: 2005 – Fly ash for concrete – definitions, requirements and quality control BS EN 592: 2002 – Instructions for use for in vitro diagnostic instruments for self-testing Withdrawn replaced by BS EN ISO 18113-5 - 2011 BS EN 746: 1997+A1 2009 – Industrial thermoprocessing equipment part 1: - common safety requirements for industrial thermoprocessing equipment BS EN 933: 2012 – Tests for geometrical properties of aggregates Part 1. Determination of particle size distribution – sieving method BS EN 1183: 1997 – Materials and articles in contact with foodstuffs. test methods for thermal shock and thermal shock endurance. BS EN 1388: - Materials and articles in contact with foodstuffs. silicate surfaces Part 1: 1996 – Determination of the release of lead and cadmium from ceramic ware Part 2: 1996 – Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware BS EN 1423: 2012 – Road marking materials. Drop on materials. glass beads, antiskid aggregates and mixtures of the two BS EN 1424: 1998 – Road marking materials. Premix glass beads incorporating amendment A1, October 2003 BS EN 1595: 1997 – Pressure equipment made from borosilicate glass 3.3. General rules for design, manufacture and testing BS EN 1595: 1980 Part 3: 1980 (1989) - Specification for pipeline and fittings of nominal bore 15 to 150mm: compatibility and interchangeability –Withdrawn replaced by BS EN 12585 1999

12

BS EN 1744-1:2009+A1:2012 Tests for chemical properties of aggregates. Chemical analysis Part 1: Chemical Analysis BS EN 1836: 2005 – Personal eye protection – sunglasses, sunglare filters for general use and filters for direct observation of the sun. Withdrawn, replaced by BS EN ISO: 12312-1:2013 + A1 2015 BS EN 1911: 2010 – Stationary source emissions – manual method of determination of HCl (Note: This standard incorporates Parts 1, 2 and 3 of the older versions) BS EN 2875: 2002 – Packaging – complete filled transport packages and unit loads – Water-spray test BS EN ISO 9227:2012 Corrosion tests in artificial atmospheres. Salt spray tests BS EN 10012: 2003 – Measurement management systems – Requirements for measurement processes and measuring equipment BS EN 12215: 2004 +A1 2009 - Coating plants – spray booths for application of organic liquid coating materials – safety requirements BS EN 12470: – Clinical Thermometers Part 1: 2009 Metallic liquid-in-glass thermometers with maximum device Part 3: 2012 Performance of compact electrical thermometers (non-predictive and predictive) with maximum device Withdrawn replaced by: BS EN ISO 80601-2-56:2012 BS EN 12585: 1999 Glass plant, pipeline and fittings. pipeline and fittings dn 15 to 1000. compatibility and interchangeability BS EN 12726: 2000 - Packaging - cork mouth finish with a bore diameter of 18,5mm for corks and tamper evident capsules BS EN 12777: 2002 – Methods of test for pallet joints Part 3: Determination of strength of pallet joints BS EN 12875: 1998 - Mechanical dishwashing resistance of domestic utensils Part 1: 2005 - Reference test method Part 2: 2002 – Inspection of non-metallic articles Part 4: 2006 - Rapid test for domestic ceramic articles Part 5: 2006 - Rapid test for ceramic catering articles BS EN 12778: 2002– Cookware – pressure cookers for domestic use

13

BS EN 12983-1:2000+A1:2004 Cookware Part 1: General requirements. Domestic cookware for use on top of a stove, cooker or hob. general requirements DD CEN/TS 12983-2 2005 Cookware. further general requirements and specific requirements for ceramic, glass and glass ceramic cookware BS EN 13010: 2003 – Packaging – unit packaging – dimensions and requirements for pegboard display BS EN 13193 – 2000 Packaging and the environment – terminology (current, work in hand) BS EN 13197: 2011 +A1 2014 Road marking materials, wear simulator turntable BS EN 13212: 2011 – Road marking – requirements for factory production control BS EN 13211: 2001 - Air quality – stationary source emissions – manual method of determination of the concentration of total mercury. BS EN 13248: 2002 – Cookware – coffee makers for domestic use with an independent heat source – definitions, requirements and test methods. BS EN 13258:2003 – Materials and articles in contact with foodstuffs – test methods for crazing resistance of ceramic articles BS EN 13284 Stationary source emissions – determination of low range mass concentration of dust Part 1: 2002 manual gravimetric method Part 2: 2004 automated measuring systems BS EN 13427 – 2004 – Packaging – requirements for the use of European standards in the field of packaging and packaging waste BS EN 13428 – 2004 – Requirements specific to manufacturing and composition – prevention by source reduction BS EN 13429 – 2004 – Packaging – reuse BS EN 13430 – 2004 – Packaging – requirements for packaging recoverable by material recycling BS EN 13431 – 2004 – Packaging – requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value BS EN 13432 – 2000 –Packaging – requirements for packaging recoverable through composting and biodegradation – test scheme and evaluation criteria for the final acceptance of packaging

14

BS EN 13526: 2002 – Stationary source emissions – determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes – continuous flame ionisation detector method Withdrawn replaced by: BS EN 12619: 2013 BS EN 13612: 2002 – Performance evaluation of in vitro diagnostic medical devices BS EN 13640: 2002 – Stability testing of in vitro diagnostic reagents Withdrawn, replaced by BS EN ISO 23640: 2015 BS EN 13649: 2002 – Stationary source emissions - determination of the mass concentration of individual gaseous organic compounds - activated carbon and solvent desorption method BS EN 13725: 2003 – Air quality – determination of odour concentration by dynamic olfactometry BS EN 14045: 2003 – Packaging – evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions BS EN 14046: 2003 – Packaging – evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions – method by analysis of released carbon dioxide BS EN 14053: 2003 – Packaging – packaging manufactured from corrugated or solid fibreboard – types and construction BS EN 14054: 2003 – Packaging – paper and paperboard packaging – design of cartons BS EN 14375: 2016 – Child-resistant non-reclosable packaging for pharmaceutical products – requirements and testing (incorporates 2006 Corrigendum No 1) BS EN 14182: 2002 – Packaging – terminology – basic terms and definitions BS EN 14385: 2004 – Stationary source emissions – determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V BS EN 14571: 2005 – Metallic coatings on non-metallic basis materials. measurement of coating thickness. micro resistivity method. (current, under review) BS EN 14634: 2010 – Glass packaging – 26h 180 crown finish – dimensions Withdrawn replaced by: BS EN 12821:2015 glass packaging. 26 h 180 crown finish. dimension BS EN 14635: 2010 – Glass packaging – 26H 126 crown finish - dimensions BS EN 14649: 2005 – Precast concrete products. test method for strength retention of glass fibres in cement and concrete (SIC test)

15

BS EN 14849: 2005 – Aerosol containers – glass containers – dimensions of aerosol valve ferrules BS EN 14634: 2010 – Glass packaging. 26 H 180 crown finish. dimensions Withdrawn, replaced by BS EN ISO 12821:2015 Glass packaging. 26 H 180 crown finish. dimensions BS EN 14635: 2010 – Glass packaging. 26 h 126 crown finish. Dimensions BS EN 14791: 2017 – Stationary source emissions – determination of mass concentration of sulphur oxides – standard reference method BS EN 14854: 2005 – Aerosol containers – glass containers – dimensions of neck finish BS EN 14798: 2005 – Glass packaging – hand-held crown bottle openers – dimensions BS EN 14887:2005 – Glass packaging. Cork removal devices. General requirements BS EN 15159-1: 2006 – Vitreous and porcelain enamels. vitreous and porcelain enamels. glass-lined apparatus for process plants. designation and specification of resistance to chemical attack and thermal shock Withdrawn, replaced by BS EN ISO 28721-2:2015 (same title) BS EN 15159-2: 2003 Vitreous and porcelain enamels. Glass-lined apparatus for process plants. quality requirements for apparatus, components, appliances and accessories Withdrawn replaced by BS EN ISO 28721-1:2011 (same title) • BS EN 15543: 2008 Glass packaging. finishes for bottles. screw thread finishes for bottles for

non-carbonated liquids. BS EN 15593: 2008 – Packaging – Management of hygiene in the production of packaging for foodstuffs – requirements BS EN 15904: 2010 – Glass Packaging – standard tolerances for flaconnage Withdrawn, replaced by BS EN ISO 12818: 2015 Glass packaging. standard tolerances for flaconnage BS EN 16287: 1 – 2014 - Glass packaging. screw finishes for pressure capsules. returnable glass MCA 1 finish BS EN 16287: 2 – 2014 - Glass packaging. Screw finishes for pressure capsules. One-way glass MCA 1 finish BS EN 16288: 1 – 2014 - Glass packaging. Screw finishes for pressure capsules. Part 1: Returnable glass MCA 3 finish Part 2: Glass packaging. Screw finishes for pressure capsules. One-way glass MCA 3 finish BS EN 16289: 2013 - Glass Packaging. Screw finishes for pressure capsules. MCA 7,5 RF Finish

16

BS EN 16290: 1 – 2014 - Glass packaging. Screw finishes for pressure capsules. Part 1: Returnable glass MCA 7,5 R finish Part 2: Glass packaging. Screw finishes for pressure capsules. One-way glass MCA 7,5 R finish BS EN 16291-1: 2013 -Glass packaging. Screw finishes for pressure capsules. Part 1: Returnable glass MCA 2 finish Part 2: Glass Packaging. Screw finishes for pressure capsules. One-way glass MCA 2 finish BS EN 16292: 2013 - Glass packaging. Screw finishes. Depressed threads BS EN 16293: 2013 - Glass packaging. Deep BVS finishes for still wines BS EN 17177 – DRAFT 2017 17/30363987 DC. Glass packaging. Crown cap. 26 mm intermediate depth crown cap BS EN 29008: 1994 – Glass Bottles. Verticality. Test method (current, under review) BS EN 29009: 1994 – Glass Containers. Height and Non-Parallelism of Finish with Reference to Container Base. Test Methods BS EN 29885: 1994 – Wide-mouth glass containers. deviation from flatness of top sealing surface. test methods (current, under review) BS EN 61006: 2004 – Methods of test for determination of the glass transition temperature of electrical insulating materials BS EN 60676: 2012 – Industrial electro heating equipment – test methods for direct arc furnaces BS EN 61211: 2005 – Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1000 v. impulse puncture testing in air Supersedes BS 7803: 1995

17

British, European, International Standards (BS EN ISO)

BS EN ISO 385: 2005 – Laboratory glassware – burettes (supersedes BS 846:1985) BS EN ISO 648: 2008 – Laboratory glassware – single volume pipettes (current, under review) BS EN ISO 835: 2007 – Laboratory glassware – graduated pipettes BS EN ISO 1042: 2000 – Laboratory glassware – one-mark volumetric flasks BS EN ISO 1938 – Geometrical product specifications (gps) dimensional measuring equipment Part 1:2015 - Plain limit gauges of linear size Part 2:2017 Reference disk gauges BS EN ISO 2233: 2001 – Complete, filled transport packages and unit loads – conditioning for testing BS EN ISO 2244: 2002 – Packaging Complete, filled transport packages and unit loads – horizontal impact tests BS EN ISO 2247: 2002 – Packaging – complete, filled transport packages and unit loads – vibration tests at fixed low frequency BS EN ISO 2873: 2002 – Packaging – complete, filled transport packages and unit loads – low pressure test BS EN ISO 3611: 2010 - Specification for external micrometres BS EN ISO 3819: 2015 Laboratory glassware – beakers BS EN ISO 4787: 2011 – Laboratory glassware – volumetric instruments – methods for testing of capacity and for use (replaces BS 1798 and BS 6696) BS EN ISO 4788: 2005 – Laboratory glassware. graduated measuring cylinders (supersedes BS 604: 1982) BS EN ISO 4796: 2016 – Laboratory glassware – bottles Part 1: Screw-neck bottles (2016) Part 2: Conical neck bottles (2001) Part 3: Aspirator bottles (2001) BS EN ISO 6414: 1995 (1996) – Technical drawings for glassware BS EN ISO 3696: 1995 – Water for analytical laboratory use. specifications and test methods.

18

BS EN ISO 7458: 2004 – Glass containers. internal pressure resistance. test methods BS EN ISO 7459: 2004 – Glass containers. thermal shock resistance and thermal shock endurance. test methods BS EN ISO 8106: 2004 – Glass containers – determination of capacity by gravimetric method – test method BS EN ISO 8113: 2004 – Glass containers. resistance to vertical load. test method BS EN ISO 8362: Injection containers for injectables and accessories Part 1: 2009+A1:2015 – Injection vials made of glass tubing Part 3: 2010 Aluminium caps for injection vials (current, under review) Part 4: 2003 Injection vials made of moulded glass Withdrawn replaced by part 1 BS EN ISO 8536 – Infusion equipment for medical use Part 1: 2011 - Infusion glass bottles BS EN ISO 8362: 2009+A1 2015 – Injection containers for injectables and accessories part 1: injection vials made of glass tubing BS EN ISO 9000: 2015 - Quality management and quality assurance standards – fundamentals and vocabulary BS EN ISO 9100 – Glass Containers Part 1: Vacuum lug finishes General Part 3: Vacuum lug finishes. 38 regular Part 5: Vacuum lug finishes. 43 and 48 Part 6: Vacuum lug finishes. 53 and 58 Part 7: Vacuum lug finishes. 58 deep Part 8: Vacuum lug finishes. 63, 66 and 70 Part 9: Vacuum lug finishes. 63, 66 and 70 Part 10: Vacuum lug finishes. 77 regular Part 11: Vacuum lug finishes. 82 regular Part 12: Vacuum lug finishes. 89 regular Part 13: Vacuum lug finishes. 100 regular Part 14: Vacuum lug finishes. 110 regular BS EN ISO 9100-14:2005 Glass containers. Vacuum lug finishes. 110 regular BS EN ISO 9163: 2005 – Textile Glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings

19

BS EN ISO 9187 Injection equipment for medical use Part 1: 2010 Ampoules for Injectables Part 2: 2010 One-point-cut (OPC) ampoules BS EN ISO 10882– Health and safety in welding and allied processes – sampling of airborne particles and gases in the operator’s breathing zone Part 1: 2011 Sampling of airborne particles Part 2: 2000 Sampling of gases BS EN ISO 11664: 2016 - Colourimetry Part 5: CIE 1976 L*u*v* Colour space and U’, V’, uniform chromaticity scale diagram Part 4: (2008) - CIE 1976 L*a*b* Colour space BS EN ISO 12048: 2001 – Packaging Complete, filled transport packages – compression and stacking tests using a compression tester BS EN ISO 13042 - Machines and plants for the manufacture, treatment and processing of hollow glass – Part 1: 2007+A1:2009. Safety requirements. gob feeder Part 2: 2004+A1: 2009 - Safety requirements. Handling machines for feeding Part 3: 2007+A1:2009 – Safety requirements. IS machines Part 5: 2003+A1:2009- Safety requirements. Presses BS EN ISO 13355: 2016– Packaging - complete, filled transport packages and unit loads – Vertical random vibration test BS EN ISO 13355: 2016 – Packaging – complete, filled transport packages and unit loads – Vertical random vibration test BS EN ISO 13385: 2011 Part 1: Geometrical product specifications (GPS). dimensional measuring equipment. callipers: design and metrological characteristics Part 2: Geometrical product specifications (GPS). dimensional measuring equipment. calliper depth gauges. design and metrological characteristics BS EN ISO 14001: 2015 – Environmental management systems. requirements with guidance for use BS EN ISO 14021: 2016 – Environmental labels and declarations – self declared environmental claims (Type II, environmental labelling) BS EN ISO 15004: 1998 – Ophthalmic instruments – fundamental requirements and test methods withdrawn, replaced by BS EN ISO 15004-2:2007 Ophthalmic instruments. fundamental requirements and test methods. light hazard protection

20

BS EN ISO 16104: 2003 – Packaging – transport packaging for dangerous goods – test methods Withdrawn, replaced by BS EN ISO 16495:2013 Packaging. Transport packaging for dangerous goods. Test methods BS EN ISO 17025: 2005 – General requirements for the competence of testing and calibration laboratories (current, work in hand) • BS EN ISO 21078-1: 2008 - Determination of boron (111) Oxide in refractory products. Part 1.

Determination of total boric oxide in oxidic materials for ceramics, glass and glazes BS EN 12726:2018. -Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules. BS EN 17177:2019. -Glass packaging. Crown cap. 26 mm diameter, 6 mm height crown cap.

21

British/International Standards (BS ISO)

BS ISO 3310: 2016 Test sieves of metal wire cloth This standard replaces BS 410-1:2000 and ISO 3310-1:2000 BS ISO 3585: 1998 – Borosilicate glass 3.3. properties BS ISO 4795: 1996 – Laboratory glassware. filter funnels BS ISO 4800: 1998 - Laboratory glassware - separating funnels and dropping funnels BS ISO 6486: 1999 (draft) – Ceramic ware, glass-ceramic ware, and glass dinnerware in contact with food Part 1: release of lead and cadmium – test method BS ISO 7348: 1992 – Glass containers - manufacture. Vocabulary BS ISO 8106: 2004 – Glass containers - determination of capacity by gravimetric method. Test method BS ISO 8164: 1990 – Glass containers - 520ml euro-form bottles. dimensions BS ISO 8113: 1985 – Glass containers - resistance to vertical load. test method BS ISO 8255-1:2017 - Microscopes. Cover glasses. Dimensional tolerances, thickness and optical properties BS ISO 9056: 1990 – glass containers - series of pilfer proof finish. dimensions BS ISO 9057: 1991 – Glass containers - 28mm tamper-evident finish for pressurized liquids. dimensions BS ISO 9802: 1996 – Raw optical glass - vocabulary BS ISO 11418-3: 2016+A1: 2017 - Containers and accessories for pharmaceutical preparations. Screw-neck glass bottles (veral) for solid and liquid dosage forms BS ISO 12818:2015 Glass packaging. Standard tolerances for flaconnage BS ISO 12821:2015 Glass packaging. 26 H 180 crown finish - dimensions

22

BS ISO 12822 – 2015 Glass packaging. 26 H 126 crown finish - dimensions BS ISO 11338: 2003 – Stationary source emissions – determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 1: Sampling Part 2: Sample preparation, clean up, and determination BS ISO 17211: 2015 – Stationary source emissions – sampling and determination of selenium compounds in flue gas BS ISO 21067: 2016 – Packaging – Vocabulary BS ISO 9000-2:1997 - Quality management and quality assurance standards. -Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 Withdrawn cross-references: ISO 9004-1, ISO 9004-2, ISO 9004-3, ISO 10005, ISO 10011-1, ISO 10011-2, ISO 10011-3, ISO 10012-1, ISO 10013, ISO 8402, ISO 9001, ISO 9002, ISO 9003 BS ISO 9000 2015 Quality management systems. Fundamentals and vocabulary BS ISO 9096: 2003 – Stationary source emissions – Manual determination of mass concentration of particulate matter BS ISO 11040 2012 -Prefilled syringes Part 1: 2015.- Glass cylinders for dental local anaesthetic cartridges Part 3: 2012 - Seals for local anaesthetic cartridges (current, under review) Part 4: 2015 - Glass barrels for injectables and sterilized sub assembled syringes ready for filling Part 5: 2012 - Plunger stoppers for injectables Part 7: 2015 - Packaging systems for sterilised sub-assembled syringes ready for filling BS ISO 11455: 1995 – Raw optical glass – determination of birefringence BS ISO 12772: 1997 – Laboratory glassware. disposable microhematocrit capillary tubes BS ISO 12775: 1997 – Guidelines on types of glass and normal bulk production composition and their test methods BS ISO 12775: 1997 – Guidelines on types of glass of normal bulk-production composition and their test methods BS ISO 16657:2006 – Sensory analysis. Apparatus. Olive oil testing glass BS ISO 18334: 2010 – Pallets for materials handling – quality of assembly of new, wooden, flat pallets

23

BS ISO 13926-1:2018. - Pen systems. Glass cylinders for pen-injectors for medical use BS ENV 13834: 2007 +A1 2009 – Cookware – Ovenware for use in domestic thermal ovens

24

International Standards (ISO)

ISO 718: 1990 – Laboratory glassware – thermal shock and thermal shock endurance – test methods ISO 719: 1985 – Glass – hydrolytic resistance of glass grains at 98oC – Method of test and classification ISO 842: 1984 – Raw materials for paints and varnishes – sampling Withdrawn, replaced by ISO 15528: 2013 ISO 4531: 1998 - Vitreous and porcelain enamels - release of lead and cadmium from enamelled ware in contact with food Part 1: - Method of test Part 2: - Permissible limits ISO 4802 – 2016 – Hydrolytic resistance of the interior surfaces of glass containers Part 1: Determination by titration method and classification Part 2: Determination by flame spectrometry and classification ISO 6486: 1999 – Ceramic and glass-ceramic ware in contact with food. release of lead and cadmium Part 1: 1999 – Methods of test Part 2: 1999 – Permissible limits ISO 7086: 2000 – Glassware and glass ceramic ware in contact with food – release of lead and cadmium Part 1: Method of test Part 2: Permissible limits ISO 8424: 1996 - Raw optical glass - resistance to attack by aqueous acidic solutions at 25 deg c - test method and classification ISO 9058: 2008 – Glass containers. standard tolerances for bottles ISO 9100: 2005 – Glass containers – vacuum lug finishes Part 1: General Part 5: 43 and 48 Regular Part 6: 53 and 58 Regular Part 7: 58 Deep Part 8: 63, 66 and 70 Regular Part 9: 63, 66 and 70 Deep Part 10: 77 Regular Part 11: 82 Regular Part 12: 89 Regular

25

Part 13: 100 Regular Part 14: 110 Regular ISO 10629: 1996 - Raw optical glass - resistance to attack by aqueous alkaline solutions at 50 deg c - Test method and classification ISO 11418: 201 – Containers and accessories for pharmaceutical preparations Part 1: 2016 - Drop dispensing Part 2: 2016 - Alpha sirop Part 3: 2016 – Veral Part 4: 2005 - Tablet Part 5: 2015 - Dropper assemblies Part 7: 2016 - Screw-neck vials made of glass tubing for liquid dosage forms

26

American Standards (ASTM)

The new version of the ASTM Book of Standards, Volume 15.02 2017, Glass; Ceramic Whitewares, has recently been published. A copy is available in the British Glass Library. ASTM C: 146 94a – 2014 - Standard test methods for chemical analysis of glass sand ASTM C: 147 2015 – Test methods for internal pressure test on glass containers ASTM C: 148 – 2017 – Standard test methods for polariscopic examination of glass containers ASTM C: 149 – 2014– Test methods for thermal shock resistance of glass containers ASTM C: 158 – 2012 –Strength of glass by flexure (determination of modulus of rupture) ASTM C: 169 - 2016 – Chemical analysis of soda-lime and borosilicate glass ASTM C: 224 – 2014 - Standard practice for sampling glass containers ASTM C: 225 – 2014 - Standard test methods for resistance of glass containers to chemical attack ASTM C: 429 – 2016 - Sieve analysis of raw materials for glass manufacture ASTM C: 621 - 2014 Standard test method for isothermal corrosion resistance of refractories to molten glass ASTM C: 623 - 2015 Standard test method for young's modulus, shear modulus, and Poisson's ratio for glass and glass-ceramics by resonance ASTM C: 657 - 2013 Standard test method for D-C volume resistivity of glass ASTM C: 675 – 2016 – Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers ASTM C 676 - 2014 - Standard test method for detergent resistance of ceramic decorations on glass tableware ASTM C: 693 - 2013 Standard test method for density of glass by buoyancy ASTM C: 770 - 2016 - Standard test method for measurement of glass stress-optical coefficient ASTM C 730 – 2013 - Standard test method for Knoop indentation hardness of glass ASTM C 735 - 2014 Standard test method for acid resistance of ceramic decorations on returnable beer and beverage glass containers

27

ASTM C 777 - 2014 Standard test method for sulfide resistance of ceramic decorations on glass ASTM E 787 – 2017 Standard specification for disposable glass micro blood collection pipets ASTM C: 813 – 2014 Standard test method for hydrophobic contamination on glass by contact angle measurement ASTM C: 824 – 2015 -Specimen preparation for determination of linear thermal expansion of vitreous glass enamels and glass enamel frits by the dilatometer method. ASTM C: 829 – 81: 2015 - Standard practices for measurement of liquidus temperature of glass by the gradient furnace method ASTM C: 912 – 2013 Standard practice for designing a process for cleaning technical glasses ASTM C 927 –2014 Standard test method for lead and cadmium extracted from the lip and rim area of glass tumblers externally decorated with ceramic glass enamels ASTM C: 965 – 2017 – Measuring viscosity of glass above the softening point ASTM C 1223 - 2014 Standard test method for testing of glass exudation from azs fusion-cast refractories ASTM C: 1256 2013 – Practice for interpreting glass fracture surface features ASTM C: 1350M – 2013 Standard test method for measurement of viscosity of glass between softening point and annealing range (approximately 108 pa•s to approximately 1013 pa•s) by beam bending (metric) ASTM C: 1606 – 2014 Standard test method for sampling protocol for tclp testing of container glassware ASTM C: 1624 – 2015 Adhesion strength and mechanical failure modes of ceramic coating by quantitative scratch testing ASTM D, E and F Series ASTM D: 1155 - 2013 – Standard test method for roundness of glass spheres ASTM D: 1214 – 10: 2015 - Standard test method for sieve analysis of glass spheres ASTM E288 – 10 (2017) - Standard Specification for Laboratory Glass Volumetric Flasks

28

ASTM E708 – 79 (2017) - Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers ASTM E787 - 81(2017) - Standard Specification for Disposable Glass Micro Blood Collection Pipets ASTM E: 714 – 2015 - Standard specification for disposable glass serological pipets ASTM E: 824 – 2015 - Standard practice for specimen preparation for determination of linear thermal expansion of vitreous glass enamels and glass enamel frits by the dilatometer method ASTM E: 890 – 2015 Standard specification for disposable glass culture tubes ASTM E: 923 – 2013 - Standard specification for glass Westergren tube, reusable ASTM E: 960 – 2013 - Standard specification for laboratory glass beakers ASTM E: 982 – 2015 - Standard specification for laboratory glass test tubes ASTM E: 1047 – 2015 - Standard specification for blood sedimentation tube, Wintrobe, glass, disposable ASTM E: 1094 – 2015 - Standard specification for pharmaceutical glass graduates ASTM E: 1214 E1 – 2015 - Standard test method for sieve analysis of glass spheres ASTM E: 1356 – 2014 - Standard test method for assignment of the glass transition temperatures by differential scanning calorimetry ASTM E: 1403 – 97 2013 - Standard specification for laboratory glass boiling flasks ASTM E: 1404 – 94 2013 - Standard specification for laboratory glass conical flasks ASTM F: 2179 - 2014 – Annealed soda-lime-silicate glass containers that are produced for use as candle containers ASTM F2980 – 13 2017 - Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF) ASTM C1606 - 10(2018). -Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware. ASTM C735 - 04(2019). -Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers.

29

German Standards – DIN

German standards can be purchased directly from: http://www.beuth.de DIN 168: 1998 - Glass container knuckle thread finishes DIN 202: 1999 – Screw threads – general plan DIN 1259: 2001 - Glass - Part 1: Terminology for glass types and groups DIN 6094: 1998 - Means of packaging - finishes for wide-mouthed glass containers - part 10: beaded edge finishes DIN 6106: 2011 Packaging - glass containers - side and base bosses [Note] This document specifies designs of base and side bosses for alignment of glass containers. These designs are attuned to locking rams employed in practice. The document is based on standard sheet T 113 of the Bundesverband Glasindustrie e. V. DIN 6121: 2008 Marking of measuring containers DIN 6647: 2003 Means of packaging Part 3: Allowable operating pressure up to 3 bar, nominal volume greater 100 litres DIN 12480: 2009 - Laboratory glassware - three-neck bottles - Woulff bottles DIN 12594: 1998 - Laboratory glassware - ground joint parts DIN 51222: 2017– Pendulum impact testing machines with a rated initial potential energy of 50j or less – requirements and verification DIN 52320: 1981 (part 1) – Internal pressure test on hollow glassware, especially glass containers – inspection by attributes Replaced by DIN EN ISO 7458: 2004 DIN 52320: 1981 (part 2) – Internal pressure test on hollow glassware, especially glass containers – inspection by variables Replaced by DIN EN ISO 7458: 2004 DIN 52346: 1982 - Thrust load test on containers Replaced by DIN EN ISO 8113: 2004 DIN 55525: 1988 - Preferred threads, for plastic and glass containers with unified screw cap; buttress thread; dimensions • • • Defect Evaluation List for Containers Made of Moulded Glass • Quality assurance of pharmaceutical and cosmetic packaging materials, Volume 14, 4th edition,

2010. ISBN: 9783871933646 – http://dnb.ddb.de

30

Pharmacopoeia

Latest amendments/revisions to the British/EU/USA Pharmacopoeia have recently been published. The relevant sections pertaining to glass containers can be found in the following updated volumes: British Pharmacopoeia 2017 – Appendix XIX B A505 – Containers – glass containers for pharmaceutical use http://www.pharmacopoeia.co.uk/ European Pharmacopoeia 2017 - Volume 9.3 Section 3.2.1 – Glass containers for pharmaceutical use http://www.edqm.eu/en/european-pharmacopoeia-publications-1401.html US Pharmacopoeia 2017 – Volume 40, Section 660 – Containers – performance testing (active from May 2017) http://www.usp.org/ Disclaimer: While we endeavour to ensure that the information contained in this document is correct, British Glass does not make any warranties or representations about the accuracy and completeness of the material on it. The material may be out of date. Users should seek appropriate advice before proceeding on the basis of any information.

31