cui - coating guide
TRANSCRIPT
-
7/30/2019 CUI - Coating Guide
1/1
BELZONA PERFORMANCE COATINGS FORCUI/ATMOSPHERIC CORROSION PROTECTION
Belzona 5811Temperature range-40C (-40F) to 150C (302F)
Constant immersiontemperature50C (122F)
Application temperature range
5C (41F) to 35C (95F)
SystemSpray/brush applied
2 coats, three colours
Minimum total DFT 400 microns(16 mils)
Chemical resistance Dilute inorganic acids WetH
2S & CO
2 Sour gas Alkalis
Properties Surface must be grit blasted Solvent free Potable water grade available
Belzona 5851Temperature range-40C (-40F) to 200C (392F)
Typical CUI immersiontemperature150C (302F)
Application temperaturerange70C (158F) to 150C (302F)
SystemSpray/brush applied
2 coats
Minimum total DFT 400microns (16 mils)
Chemical resistance Mild chemical contact
Properties Surface tolerant
Surface preparation by hand Solvent free
Belzona 5831Temperature range-40C (-40F) to 120C (248F)
Constant immersiontemperature40C (104F)
Application temperature range5C (41F) to 35C (95F)
SystemBrush applied
2 coats
Minimum total DFT 500 microns
(20 mils)
Chemical resistance Mild chemical contact
Properties Surface tolerant (damp/wet) Solvent free Can be applied and curedunderwater
Belzona 5891Temperature range-40C (-40F) to 200C (392F)
Constant immersiontemperature90C (194F)
Application temperature range
5C (41F) to 35C (95F)
SystemSpray/brush applied
1 or 2 coats
Minimum total DFT 400 microns(16 mils)
Chemical resistance Hydrocarbons Methanol
Amines MDEA Sour gas Wet H
2S & CO
2
Properties Not surface tolerant Must be grit blasted Solvent free
Belzona 5111/6111Temperature range-40C (-40F) to 150C (302F)
Splash resistanttemperature
60C (140F)
Application temperaturerange5C (41F) to 35C (95F)
SystemSpray/brush applied
4 coats, two colours
2 coats of Belzona 6111Minimum total DFT 75 microns(3 mils)
2 coats of Belzona 5111Minimum total DFT 150 microns(6 mils)
Chemical resistance Hydrocarbons Solvents Dilute inorganic acids
Properties Solvent based Anodic coating Self healing Excellent UV resistance
Belzona 5841Temperature range-40C (-40F) to 200C (392F)
Constant immersiontemperature80C (176F)
Application temperaturerange30C (86F) to 80C (176F)
SystemSpray/brush applied
2 coats
Minimum thickness per coat100 microns (4 mils)
Chemical resistance Mild chemical contact
Properties Surface tolerant Manual surface preparation
The Oil & Gas industry demandsproduction techniques whichinvolve high operating tempera-tures and pressures.In addition aggressive chemicalsand erosion-corrosion also taketheir toll on equipment, resultingin increased operating costs.
By utilising a cost-effectiveBelzona solution, maintenancepersonnel can: Reduce downtime Lower maintenance costs Improve efficiency Simplify maintenance procedures Extend machinery and equipment
life
Customer ServiceLocal support is provided by anetwork of trained Belzona technicalconsultants who will diagnose theproblem, recommend the Belzonasolution and provide on-siteapplication training and supervision24 hours a day.
Global EngineeringSupportOur team of qualified industryprofessionals utilise their extensiveknowledge and experience to trainand advise customers on the useand application of Belzonaproducts.
Reliability in ServiceOn countless occasions Belzonarepairs and protective coatings haveoutlasted the original equipment,component or structure. This is whynumerous product applications areinternationally approved byengineers, contractors andspecifiers.
Pipework Vessels Structural steelwork Tanks
Valves Risers Insulation Columns Steam lines Exhaust ducting Boilers
Fan blades
BELZONA COATINGS FORCUI / ATMOSPHERIC ARE
USED GLOBALLY ON:
Belzona 3211*Temperature range
Ambient temperatures
Constant immersiontemperatureNot applicable*
Application temperature range5C (41F) to 35C (95F)
SystemSpray/brush applied
2 coats incorporatingreinforcing sheet
Minimum total DFT 400 microns(16 mils)
Chemical resistance Oil to 50C (122F)
Properties Weatherproof
Microporous for application todamp surfaces Fire resistant Flexible for thermal insulation
* Belzona 3211 is an external coat-ing for protecting againstatmospheric conditions
Belzona understand that asnew production techniquesare developed, operating con-ditions become increasinglychallenging and varied.
To help combat this, weoffer corrosion resistantproducts that work acrossthe temperature range and atdifferent levels of immersion.
We appreciate that speed andease of application are cru-cial, so our products are alsodesigned to allow you theeasiest, quickest solution.
BELZONA
CUI / ATMOSPHERICSOLUTIONS
Co p y r i g h t 2 0 0 8 b y B e l z o na I n t e r na -tional Limited. All rights reserved. No part of thiswork covered by the copyrights hereon may bereproduced or used in any form or by any means - graphic,electronic or mechanical including photocopying, record-ing, taping or information storage and retrieval systems- without written permission of the publisher.
Belzona is a registered trade mark35-10-08
Belzona Inc.,2000 N.W. 88 Court, Miami,
Florida 33172, U.S.A.Tel: +1 (305) 594 4994Fax: +1 (305) 599 1140
E-mail: [email protected]
ISO 9001:2000Q 09335
ISO 14001:2004EMS 509612
Belzona Asia PacificRattakit Building, 29/13 Moo 9,Sukhumvit Road, Banglamung
Chonburi 20150, ThailandTel: +66 38 378099Fax: +66 38 378098
E-mail: [email protected]
Belzona Polymerics Ltd.,Claro Road, Harrogate,
HG1 4DS, England.Tel: +44 (0) 1423 567641Fax: +44 (0) 1423 505967
E-mail: [email protected]
This table is a guide. For accurate coating
selection and to check you have the latest
version of this guide, please consult a BelzonaTechnical Consultant. Availability of some
products may be geographically limited.