cubicle bedding - varahlutir...2016/03/16  · poly-latex mattress, 30mm or 40mm thick, from ideal...

7
22 Tel. (+31)(0)346 35 19 34 Fax. (+31)(0)346 35 47 41 www.beerepootagri.com We at BeerepootAgri are convinced of the importance of a the total embodiment of a good resting place for your cows. The main thing that cows require is to lie down and rest. That is why we have to take care that cubicles in your barn are equipped in the right way that cows are encouraged to lie down quicker to ruminate! Besides the proper cubicle divider, comfortable and dry cubicle bedding is most crucial. With our mattresses, waterbeds and accessories for deep litter bedding, you are able to create that comfortable resting place. Our programme offers cubicle bedding which fulfills your needs and requirements. CUBICLE BEDDING

Upload: others

Post on 16-Sep-2020

5 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: CUBICLE BEDDING - Varahlutir...2016/03/16  · Poly-latex mattress, 30mm or 40mm thick, from ideal combination of PU and latex foam Stable and elastic (pressing 240kg/m3) No dent formation

22 Tel. (+31)(0)346 35 19 34 ▪ Fax. (+31)(0)346 35 47 41 ▪ www.beerepootagri.com

We at BeerepootAgri are convinced of the importance of a the total embodiment of a good resting place for your cows. The main thing that cows require is to lie down and rest. That is why we have to take care that cubicles in your barn are equipped in the right way that cows are encouraged to lie down quicker to ruminate!

Besides the proper cubicle divider, comfortable and dry cubicle bedding is most crucial. With our mattresses, waterbeds and accessories for deep litter bedding, you are able to create that comfortable resting place. Our programme offers cubicle bedding which fulfills your needs and requirements.

CUBICLE BEDDING

Page 2: CUBICLE BEDDING - Varahlutir...2016/03/16  · Poly-latex mattress, 30mm or 40mm thick, from ideal combination of PU and latex foam Stable and elastic (pressing 240kg/m3) No dent formation

23

Knee bars (deep litter, mattress, waterbed)

ARTICLE No. DESCRIPTION

■ PE-tube 20017-12125-200 Meter PE-tube 200x9.6mm90-22171-000 Bow bracket round 200mm, 40x6mm 90-22510-085 Anchor bolt galv. M10x85

■ PE-tube 16017-12125-160 Meter PE-tube 160x9.1mm99-00099-369 Bow bracket for tube 160mm, 50x8mm, 100mm elevated90-22512-095 Anchor bolt galv. M12x10090-22728-170 Bow bracket with single support for tube 160mm, inner height 170mm90-22510-085 Anchor bolt galv. M10x85

■ PE-tube 12517-12125-125 Meter PE-tube 125x7.3mm90-22728-135 Bow bracket with single support for tube 125mm, inner height 135mmAS-22718-240 Knee bar support 240x100x8mm for tube PE 125mm to 60.3mm lower tube of divider, completeAS-22716-340 Knee bar support 340x100x6mm for tube PE 125mm and board to 60.3mm lower tube of divider, complete90-22510-085 Anchor bolt galv. M10x85

■ Knee bars are supplied with connection tube

■ Round shaped, synthetic ■ Keeps cows to the rear end of the cubicle ■ Cleaner bedding■ PE-tube 200mm, wall thickness of 9.6mm■ PE-tube 160mm, wall thickness of 9.1mm■ PE-tube 125mm, wall thickness of 7.3mm■ Mounted with 10cm elevated bow bracket, floor moun- ted bow bracket or to cubicle devider 60.3mm■ Brackets have to be mounted near each cubicle divider and at each knee bar ending

■ PE-tube 160-125mm mounted on cubicle floor

■ PE-tube 125mm mounted to cubicle divider 60.3mm

■ PE-tube 160mm mounted in elevated bow bracket

■ PE-tube 200mm in bow bracket

Tel. (+31)(0)346 35 19 34 ▪ Fax. (+31)(0)346 35 47 41 ▪ www.beerepootagri.com

CUBICLE BEDDING

Page 3: CUBICLE BEDDING - Varahlutir...2016/03/16  · Poly-latex mattress, 30mm or 40mm thick, from ideal combination of PU and latex foam Stable and elastic (pressing 240kg/m3) No dent formation

24 Tel. (+31)(0)346 35 19 34 ▪ Fax. (+31)(0)346 35 47 41 ▪ www.beerepootagri.com

Poly-latex soft mattress with 8.0mm thick rubber top layer

■ Rubber top layer, 8.0mm thick (190cm wide) with heavy tissue reinforcement and provided with hammer stroke profile on top for proper grip, produced from the best quality materials ■ Poly-latex mattress, 30mm or 40mm thick, from ideal combination of PU and latex foam■ Stable and elastic (pressing 240kg/m3)■ No dent formation■ Top layer tested by DLG■ Easy to clean

1 Poly-latex soft mattress 30mm 2 8.0mm thick rubber top layer 3 Mounting profile INOX, 40°4 Mounting profile INOX, 40°

ARTICLE No. DESCRIPTION

■ Top layer41-55090-190 Meter rubber top layer 8.0mm hammer stroke profile, W=190cm, made to measure

41-55090-180 Meter rubber top layer 8.0mm hammer stroke profile, W=180cm, made to measure■ Mattress43-58073-170 Poly-latex soft mattress 170x100x3cm43-58073-180 Poly-latex soft mattress 180x100x3cm43-58077-170 Poly-latex soft mattress 170x100x4cm43-58077-180 Poly-latex soft mattress 180x100x4cm49-58066-050 Protection foil on a roll 50x4m05-06001-050 Tape to seal protection foil■ Fixing98-55003-250 Mounting profile INOX 32x18x2500mm, 40°, including fixing materials4

■ Other features of this cow mattress on request

A B

A B

20.08.2015Matratze - Topmat 8mm

Datum:

A B

A B

20.08.2015Matratze - Topmat 8mm

Datum:

2 1

3 4

3 4

■ Mounting profile INOX, 40° encircling

A B

A B

20.08.2015Matratze - Topmat 8mm

Datum:

CUBICLE BEDDING

Page 4: CUBICLE BEDDING - Varahlutir...2016/03/16  · Poly-latex mattress, 30mm or 40mm thick, from ideal combination of PU and latex foam Stable and elastic (pressing 240kg/m3) No dent formation

25

Poly-latex soft mattress with 4.0mm thick rubber top layer

■ Rubber top layer, 4.0mm thick (200cm wide) with heavy tissue reinforcement and provided with hammer stroke profile on top for proper grip, produced from the best quality materials ■ Poly-latex mattress, 30mm or 40mm thick, from ideal combination of PU and latex foam■ Stable and elastic (pressing 240kg/m3)■ No dent formation■ Top layer tested by DLG■ Easy to clean

ARTICLE No. DESCRIPTION

■ Top layer41-55084-200 Meter rubber top layer 4.0mm hammer stroke profile, W=200cm, made to measure

■ Mattress43-58073-170 Poly-latex soft mattress 170x100x3cm43-58073-180 Poly-latex soft mattress 180x100x3cm43-58077-170 Poly-latex soft mattress 170x100x4cm43-58077-180 Poly-latex soft mattress 180x100x4cm49-58066-050 Protection foil on a roll 50x4m05-06001-050 Tape to seal protection foil

■ Fixing98-58120-000 Mounting profile aluminum 3000x60 with 8x INOX screw98-58122-000 Mounting profile aluminum 3000x60 with 8x concrete nail49-58116-200 Mounting rod PE 2000x20x25mm, incl. fixing materials

■ Heavy tissue reinforcement

3 4A B

A B

21.08.2015Matratze - Topmat 3mm

Datum:

AB

AB

21.08.2015 Matratze - Topmat 3mmDatum:

A B

A B

21.08.2015Matratze - Topmat 3mm

Datum:

2 1

3 4AB

AB

21.08.2015 Matratze - Topmat 3mmDatum:

A B

A B

21.08.2015Matratze - Topmat 3mm

Datum:

Tel. (+31)(0)346 35 19 34 ▪ Fax. (+31)(0)346 35 47 41 ▪ www.beerepootagri.com

1 Poly-latex soft mattress 30mm 2 8.0mm thick rubber top layer 3 Mounting profile aluminum4 Mounting rod PE

CUBICLE BEDDING

Page 5: CUBICLE BEDDING - Varahlutir...2016/03/16  · Poly-latex mattress, 30mm or 40mm thick, from ideal combination of PU and latex foam Stable and elastic (pressing 240kg/m3) No dent formation

26

Poly-latex soft mattress with 3.2mm thick rubber top layer

■ Rubber top layers, 3.2mm thick (200cm wide) with synthetic reinforcement, available in two designs of profiles: ■ wave profile on top for proper grip and dryer bedding ■ fabric profile on top for proper grip and keeps litter on the bedding surface ■ Poly-latex mattress, 30mm or 40mm thick, from ideal combination of PU and latex foam■ Stable and elastic (pressing 240kg/m3)■ No dent formation■ Easy to clean

Pacific Waterbed

Beerepoot Stalinrichtingen BV ▪ Tel. (+31)(0)346 35 19 34 ▪ Fax. (+31)(0)346 35 47 41 ▪ www.beerepootagri.com

Pacific Waterbed New Generation

The characteristics still stay the same as the old one:

Marry the shape of the cow without pressure points. Natural insulation of rubber in roll up to 50 mattress. The reliability of the double textile reinforcement inside the rubber. An adapted non-skid structure. Hygienic and easy of maintenance due to convex surface. Immediate flow of the liquids after lifting of the animal. A simple and fast installation

Each cubicle has an independent water reserve. The pacific waterbed has been improved according the comments we had from our customers. If the resistance and comfort were certified they were a humidity problem. Therefore we kept the same product but changed the design as you can see below:.

Central part that allows good ventilation from the sides what

fights against humidity by reducing the cow sweat.

Top and bottom part of the Waterbed.

The grooves going down to the end of the cubicles help to improve the runoff of the liquids again to fight against the humidity what is the main factor of bacteria development.

ARTICLE No. DESCRIPTION

■ Top layer41-55078-200 Meter rubber top layer 3.2mm wave profile, with synthe- tic reinforcement, W=200cm, made to measure

■ Mattress43-58073-170 Poly-latex soft mattress 170x100x3cm43-58073-180 Poly-latex soft mattress 180x100x3cm43-58077-170 Poly-latex soft mattress 170x100x4cm43-58077-180 Poly-latex soft mattress 180x100x4cm49-58066-050 Protection foil on a roll 50x4m05-06001-050 Tape to seal protection foil

■ Fixing98-58120-000 Mounting profile aluminum 3000x60 with 8x INOX screw98-58122-000 Mounting profile aluminum 3000x60 with 8x concrete nail49-58116-200 Mounting rod PE 2000x20x25mm, incl. fixing materials

■ Rear end mounted with mounting rod PE

■ Wave profile ■ Fabric profile

3 4

A B

A B

21.08.2015Matratze - Topmat 3mm

Datum:

2 1

3 4AB

AB

21.08.2015 Matratze - Topmat 3mmDatum:

A B

A B

21.08.2015Matratze - Topmat 3mm

Datum:

A B

A B

21.08.2015Matratze - Topmat 3mm

Datum:

AB

AB

21.08.2015 Matratze - Topmat 3mmDatum:

1 Poly-latex soft mattress 30mm 2 3.2mm thick rubber top layer 3 Mounting profile aluminum4 Mounting rod PE

Tel. (+31)(0)346 35 19 34 ▪ Fax. (+31)(0)346 35 47 41 ▪ www.beerepootagri.com

CUBICLE BEDDING

Page 6: CUBICLE BEDDING - Varahlutir...2016/03/16  · Poly-latex mattress, 30mm or 40mm thick, from ideal combination of PU and latex foam Stable and elastic (pressing 240kg/m3) No dent formation

27

Poly-latex soft mattress for combi-bedding

■ Rubber top layer, 8.0mm thick (125cm wide) with heavy tissue reinforcement and provided with hammer stroke profile on top for proper grip, first class materials ■ Poly-latex mattress, 2 layers of 40mm thick, from ideal combination of PU and latex foam■ Stable and elastic (pressing 240kg/m3)■ No dent formation■ Top layer tested by DLG

With combi-bedding dairy farmers combine the best functions of both mattresses and deep litter. Combi-bedding provides cows in the rear end of the cubicle with the comfort of deep litter and the resilience of the 88mm thick mattress in the front.The durable Poly-latex soft mattress is the solution to achieving the best comfort. This type of mattress is composed as a double-layered knee-bed (each 40mm thick) with a rubber top layer of 8mm thick. By using the soft mattress, dent formation in the knee-area of deep litter bedding will be history. Therefore enabling your cows freedom of movement to safely lie down or stand up anytime!

Combi-bedding is suitable for dairy farmers who don’t use solids out of manure for deep litter, but even demand a beneficial deep-litter-solution in de rear end of the cubicle. Combi-bedding cuts the consumption of litter significantly by partially mattressing the cubicle. This will save on labour and total costs.

ARTICLE No. DESCRIPTION

■ Top layer41-55090-125 Meter rubber top layer 8.0mm hammer stroke profile, W=125cm, made to measure

■ Mattress43-58077-180 Poly-latex soft mattress 180x100x4cm49-58066-050 Protection foil on a roll 50x4m05-06001-050 Tape to seal protection foil

■ Fixation rear end98-55003-250 Mounting profile INOX 32x18x2500mm, 40°, including fixing materials

■ Fixation to brisket-concrete base90-58016-081 Impact anchor INOX 8x80mm including washer 8x25x2mm4

■ Other features of this cow mattress on request

Com

bibo

xdek

Combi-boxdek: Het beste van twee werelden!De beste eigenschappen van twee type boxbedekkingen (hoge box en diepstrooisel box) zijn samengevoegd in het prefab Combi-boxdek van Den Boer Beton. Het Combi-boxdek biedt koeien achter in de ligplaats het ligcomfort van diepstrooisel en voorin de continue bescherming van een matras tijdens het opstaan/gaan liggen. Het Combi-boxdek is met name geschikt voor veehouders die niet met gesepareerde mest instrooien, maar toch achter in de box een diepstrooisel-oplossing willen. Door de slechts gedeeltelijk benodigde instrooiing, wordt het verbruik van strooisel aanzienlijk beperkt. Aan de voorzijde is het Combi-boxdek uitgevoerd met een verhoogd plateau met ruimte voor een brede strook noppenmat (met inlage) van 25 �����������������������������������������������������������������������������������������������������������������������������������������-teitsnoppenmat is comfortabel en biedt bescherming tegen beton. Het verhoogde oppervlak loopt schuin af naar het achterste deel. Dit verdiepte deel vormt het diepstrooisel-ligbed. Het boxdek is op afschot vervaardigd, waardoor koeien iets schuin omhoog liggen. Hierdoor liggen koeien rechter en blijven ligplaatsen schoner.

Voordelen: Green bedding waar het echt nodig is: - 50% minder strooivolume tov traditioneel diepstrooisel. - lagere arbeidskosten door minder instrooiwerk

Comfortabele rubberen strook voor opstaan koe

Geïntegreerde knieboom

Zeer solide basis voor montage boxen

2

13072500

Variabele achterrandhoogte is mogelijk

50% minder strooivolume1 Poly-latex soft mattress 2x 40mm 2 8.0mm thick rubber top layer3 Impact anchor INOX including washer4 Mounting profile INOX, 40°

■ No dent formation in the knee area

B

A

BA

11.09.2015

Matratze - Kombi-Box

Datum:

1150

1300 750

1080

3 41

2

B

A

BA

11.09.2015

Matratze - Kombi-Box

Datum:

1150

1300 750

1080

3 4B

A

BA

11.09.2015

Matratze - Kombi-Box

Datum:

1150

1300 750

1080

Tel. (+31)(0)346 35 19 34 ▪ Fax. (+31)(0)346 35 47 41 ▪ www.beerepootagri.com

CUBICLE BEDDING

Page 7: CUBICLE BEDDING - Varahlutir...2016/03/16  · Poly-latex mattress, 30mm or 40mm thick, from ideal combination of PU and latex foam Stable and elastic (pressing 240kg/m3) No dent formation

28

CUBICLE BEDDING

Tel. (+31)(0)346 35 19 34 ▪ Fax. (+31)(0)346 35 47 41 ▪ www.beerepootagri.com

Waterbed with knee mattress

ARTICLE No. DESCRIPTION

44-11600-110 Waterbed Pacific 110x180, complete with knee mattress (60cm) and fixing materials 44-11600-115 Waterbed Pacific 115x180, complete with knee mattress (60cm) and fixing materials44-11600-120 Waterbed Pacific 120x180, complete with knee mattress (60cm) and fixing materials44-11500-001 Filling system for waterbed

■ High quality rubber with synthetic reinforcement and wave profile on top for proper grip and anti-slip■ The special kind of wave profile keeps drier bedding ■ Standard equipped with knee mattress, 60cm wide■ Stable and elastic (pressing 240kg/m3)■ No dent formation■ Tested by DLG

Blister-mattress

ARTICLE No. DESCRIPTION

41-55085-180 BP20 roll mat with 10mm blisters, 20mm thick, W=180cm, per meter41-55095-180 BP25 roll mat with 12mm blisters, 25mm thick, W=180cm, per meter41-55100-190 BP33 roll mat with 19/12mm blisters, 33/25mm thick, W=190cm, per meter98-55006-250 Mounting profile INOX 32x18x2500mm, 90°, including fixing material

3 4

A B

A B

21.08.2015Matratze - Topmat 3mm

Datum:

A B

A B

21.08.2015Matratze - Topmat 3mm

Datum:

A B

A B

21.08.2015Matratze - Topmat 3mm

Datum:

1 Waterbed Pacific2 Knee mattress 3 Mounting profile aluminum4 Rear side waterbed Pacific

A B

A B

21.08.2015Matratze - Topmat 3mm

Datum:

3 4

21