cube bank 1 2 group 3 go encelium edge standalone …€¦ · encelium edge™ standalone wireless...

2
ENCELIUM EDGE Standalone Wireless Light Management System Quick system installation and setup guide www.osram.us/edge ENCELIUM EDGE System setup (default setup shown) Note: Mobile app screenshots shown may not be the latest versions available. ENCELIUM EDGE Controller Number: Installed Area: Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here ENCELIUM EDGE Hardware Barcode Logbook Meeting Room Download the Free ENCELIUM EDGE Mobile Setup App 1 2 3 Meeting Room 1 SCAN – the device barcodes for an area 2 GROUP – the barcodes for that area 3 GO – to the next area ENCELIUM EDGE Controller Number: Installed Area: Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here ENCELIUM EDGE Hardware Barcode Logbook Lobby ENCELIUM EDGE Controller Number: Installed Area: Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here ENCELIUM EDGE Hardware Barcode Logbook Cube Bank 2 ENCELIUM EDGE Controller Number: Installed Area: Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here Place sticker here ENCELIUM EDGE Hardware Barcode Logbook Cube Bank 1 Lobby Cube Bank 2 Cube Bank 1 Device barcode locator map EN-SCPPH- 0450-ZB 45570 AAAAAAAAAAAAAAAA yymmdd Made in Canada Works with OSRAM ENCELIUM STD RANGE SENSOR AAAAAAAAAAAAAAAA Setup require barcode. Do not discard. EN-EC-ZB-SW 56330 6NA8 Made in Canada FCC ID:H79DFZM-E7210 IC ID:4259B-DFZM7210 Max ambient temperature +40 C For Plenum Use AAAAAAAAAAAAAAAA MAC: 00:00:00:00:00:00 yymmdd POE-IN NC POE-IN Upgradable to OSRAM ENCELIUM Networked LMS ENCELIUM EDGE AAAAAAAAAAAAAAAA EDGE CTRL AAAAAAAAAAAAAAAA Made in Canada Works with OSRAM ENCELIUMSIMPLUX3 SCENE WS AAAAAAAAAAAAAAAA EN-WS-SC3-ZB-WH 45574 FCC ID:H79DFZM-E7220 IC ID:4259B-DFZM7220 Wallstation - Wireless 3-Scene Control Install per installation instructions and electrical & building codes. Max ambient temperature +50 AAAAAAAAAAAAAAAA yymmdd Wireless Sensor Wireless Control Module (WALC, WADR, WPL) Wireless Wallstation ENCELIUM EDGE Controller Connected Lighting Module (CLM) in light fixture SCAN GROUP GO to next area Scan, Group and Go

Upload: duongthuan

Post on 07-Apr-2018

222 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Cube Bank 1 2 GROUP 3 GO ENCELIUM EDGE Standalone …€¦ · ENCELIUM EDGE™ Standalone Wireless Light Management System Quick system installation and setup guide ... POE-IN yymmdd

ENCELIUM EDGE™ Standalone Wireless Light Management System Quick system installation and setup guide

www.osram.us/edge

ENCELIUM EDGE™ System setup (default setup shown)

Note: Mobile app screenshots shown may not be the latest versions available.

ENCELIUM EDGE Controller Number: Installed Area:

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

8

ENCELIUM EDGE Hardware Barcode Logbook

Note: 1. Each ENCELIUM EDGE Controller covers a space of up to approximately ten thousand square feet

and/or up to one hundred nodes.

2. Additional pages can be downloaded from www.osram-americas.com/simpluxinstall

SAVE THESE PAGES FOR FUTURE REFERENCE!

Meeting Room

Download the Free ENCELIUM EDGE Mobile Setup App

1

2

3

Meeting Room

1 SCAN – the device barcodes for an area

2 GROUP – the barcodes for that area

3 GO – to the next area

ENCELIUM EDGE Controller Number: Installed Area:

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

8

ENCELIUM EDGE Hardware Barcode Logbook

Note: 1. Each ENCELIUM EDGE Controller covers a space of up to approximately ten thousand square feet

and/or up to one hundred nodes.

2. Additional pages can be downloaded from www.osram-americas.com/simpluxinstall

SAVE THESE PAGES FOR FUTURE REFERENCE!

Lobby

ENCELIUM EDGE Controller Number: Installed Area:

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

8

ENCELIUM EDGE Hardware Barcode Logbook

Note: 1. Each ENCELIUM EDGE Controller covers a space of up to approximately ten thousand square feet

and/or up to one hundred nodes.

2. Additional pages can be downloaded from www.osram-americas.com/simpluxinstall

SAVE THESE PAGES FOR FUTURE REFERENCE!

Cube Bank 2

ENCELIUM EDGE Controller Number: Installed Area:

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

8

ENCELIUM EDGE Hardware Barcode Logbook

Note: 1. Each ENCELIUM EDGE Controller covers a space of up to approximately ten thousand square feet

and/or up to one hundred nodes.

2. Additional pages can be downloaded from www.osram-americas.com/simpluxinstall

SAVE THESE PAGES FOR FUTURE REFERENCE!

Cube Bank 1

Lobby

Cube Bank 2

Cube Bank 1

Device barcode locator map

EN-SCPPH

-0450-ZB45570

AA

AA

AA

AA

AA

AA

AA

AA

yymm

dd

Made in Canada

Works withOSRAMENCELIUM ®

STD RANGE SENSOR

AAAAAAAAAAAAAAAASetup require barcode.

Do not discard.

EN-EC-ZB-SW56330

6NA8

Made in Canada

FCC ID:H79DFZM-E7210IC ID:4259B-DFZM7210

Max ambient temperature +40 oCFor Plenum Use

AAAAAAAAAAAAAAAAMAC: 00:00:00:00:00:00

yymmdd

POE-IN

NC

POE-IN

Upgradable to OSRAMENCELIUM ® Networked LMS

ENCELIUM EDGE TM

AAAAAAAAAAAAAAAA

EDGE CTRL

AAAAAAAAAAAAAAAA

Made inCanada6NA8

Works withOSRAMENCELIUM® SIMPLUXTM

3 SCENE WS

AAAAAAAAAAAAAAAA

EN-WS-SC3-ZB-WH45574

FCC ID:H79DFZM-E7220IC ID:4259B-DFZM7220

Wallstation - Wireless 3-Scene Control

Install per installation instructions and electrical & building codes.Max ambient temperature +50

AAAAAAAAAAAAAAAAyymmdd

Wireless Sensor

Wireless Control Module(WALC, WADR, WPL)

WirelessWallstation

ENCELIUM EDGE Controller

Connected Lighting Module (CLM) in light fixture

SCAN

GROUP

GO to next area

Scan, Group and Go

Page 2: Cube Bank 1 2 GROUP 3 GO ENCELIUM EDGE Standalone …€¦ · ENCELIUM EDGE™ Standalone Wireless Light Management System Quick system installation and setup guide ... POE-IN yymmdd

ENCELIUM EDGE™ System quick installation guide

For installation and technical questions go to www.osram.us/partner-resources

Remove starter kit from the box. Starter kit includes:

— ENCELIUM EDGE Lighting Controller

— ENCELIUM EDGE Controller power supply unit and cable

— Wiring Test Tool (battery included)

Literature enclosed: — Quick System Installation and Setup Guide

— ENCELIUM EDGE Hardware Barcode Logbook

— ENCELIUM EDGE System Installation Guide

— Installation, Wiring & User Manuals

— Connect the ENCELIUM EDGE Controller power supply unit to a NEMA-approved junction box (refer to the installation manual supplied in packaging).

— Connect supplied CAT-5/power cord from the power supply unit to the ENCELIUM EDGE Controller.

— Remove the controller barcode at perforation and affix to Hardware Barcode Logbook supplied with ENCELIUM EDGE controller.

— Connect Control Modules to NEMA- approved junction boxes where applicable (refer to the installation manual supplied in packaging).

— Refer to “Device Barcode Locator Map” on opposite page.

— Locate and remove barcodes on hardware at perforation and affix to Hardware Barcode Logbook supplied with ENCELIUM EDGE controller.

— Using the wiring test tool, confirm wiring is installed properly.

— Install 2-AA batteries (supplied) in each Wireless Sensor.

— Refer to “Device Barcode Locator Map” on opposite page of this document.

— Locate and remove barcodes on hardware at perforation and affix to Hardware Barcode Logbook supplied with ENCELIUM EDGE controller.

— Mount sensors (refer to the installation manual supplied in packaging).

— Install batteries (supplied) in each Wireless Wallstation.

— Refer to “Device Barcode Locator Map” on opposite page of this document.

— Locate and remove barcodes on hardware at perforation and affix to Hardware Barcode Logbook supplied with ENCELIUM EDGE controller.

— Mount wallstations (refer to the installation manual supplied in packaging).

1 2 3Unpack

contents of boxInstall

ENCELIUM EDGE Controller

Install Wireless Control Modules (WALC, WADR, WPL or CLM)

4Install

Wireless Sensors

5Install

Wireless Wallstations

TT

How to log your device barcodes Three easy steps to saving your device codes

1 – Identify area on new page of Hardware Barcode Logbook (i.e., Meeting Room, Conference Room 1, Cube Bank 1, etc.)

2 – Remove barcode from device and affix to Hardware Barcode Logbook supplied with ENCELIUM EDGE Controller.

3 – Stick barcode on appropriate page in the Hardware Barcode Logbook. Save for set up staff and future reference.

1 Identify and record area name

LobbyENCELIUM EDGE Controller Number: Installed Area:

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

Place stickerhere

8

ENCELIUM EDGE Hardware Barcode Logbook

Note: 1. Each ENCELIUM EDGE Controller covers a space of up to approximately ten thousand square feet

and/or up to one hundred nodes.

2. Additional pages can be downloaded from www.osram-americas.com/simpluxinstall

SAVE THESE PAGES FOR FUTURE REFERENCE!

3 Stick

2 Remove

Example:

Wireless Area Lighting Control Module

Note: You must first obtain the barcode from the ENCELIUM EDGE Controller and stick it on the inside front cover of the Hardware Barcode Logbook to designate the “space” name. Then, proceed to each area within the space as described above.

TT Wiring Test Tool verifies electrical connection

LMS122R1 11-17

Wiring Test Tool NOT applicable for installation

TT TT

TT

OSRAM is a registered trademark of OSRAM GmbH. ENCELIUM is a registered trademark. ENCELIUM EDGE is a trademark of OSRAM SYLVANIA Inc. ZigBee is a registered trademark of the ZigBee Alliance. Specifications subject to changewithout notice.

© 2017 OSRAM SYLVANIA Inc.