8/14/2019 Crystal Precision Engineering- PN 18172-2

1/3

For the attention of Paul Harrison

Crystal Precision Engineering11 Bank StreetWolverhamptonWest MidlandsWV10 9DU

09 February 2008

Dear Sirs

Proposal PN 18172-2

Following our recent meeting we have pleasure in submitting our revised proposal for yourconsideration:

Requirements: To provide a twin hopper, 2 off holding chamber, 4 off slidinggates and a common support frame.

Application: Material: Sand (to be confirmed)Bulk Density: Assumed approx 100lbs/ftFeed Rate: Not knownSizes: GranularCondition: Assumed dry and free flowing

Holding Chamber: Mild steel holding chamber to hold approx 25 Kg of productsize approx 600 mm x 650 mm x 100 mm manufactured from5 thick plate complete with guide rail for second sliding gate.

Pneumatic Vibrators: 2 off pneumatic vibrators fitted to holding chamber

Surface Finish: Paint outside to clients specification. Client to control

Sliding Gate (4 off reqd): Mild steel sliding gate complete with guide rails. Gate to have 9flame cut slots. Client to mount and control cylinders tooperate gate. Guide rails manufactured from mildsteel ground stock, gates manufactured from 10 mm thicksurface ground plate.

Support Frame: Mild steel hopper support frame manufactured from 80 mm x

8/14/2019 Crystal Precision Engineering- PN 18172-2

2/3

80 mm x 5 mm thick S.H.S to give a discharge height to beadvised.

Painting: Paint to clients specification

Hopper: 12ft3 mild steel twin outlet hopper manufactured from 5 mmthick plate complete with internal baffles and bolt on top platewith 9 slots cut to suit sliding gate. Each hopper compartmentto have a 6ft capacity.

Surface Finish: Paint outside to clients specification, as material inside.

Hopper Lid: Hopper lid manufactured from 3 thick mild steel completewith inlet spigots to suit clients infeed connections.

PRICE PER SYSTEM: 5,710.00 each (2 off required)

The equipment supplied will be manufactured to The Supply of Machinery (Safety)Regulations 1992. CE documentation is issued as applicable.

This proposal is prepared without representative samples of material being examined andcan only be confirmed after receipt and satisfactory testing of such material.

The above prices are exclusive of installation and commissioning. However, these servicesare available if required at additional cost.

Manufacturing time based on current production capacity is approximately 8 weeks fromreceipt of your official order. This period may be extended if volume quantities of yourproduction samples are not made available to us within 7 days of order, or there is thenecessity to agree technical specifications or prepare drawings for approval.

Packing and carriage charges ex works Derby will be chargeable extra.

VAT is chargeable at the rate current at the time of despatch.

Subject to receipt of two satisfactory trade references and bankers reference with order,payment terms are:

30% with order60% prior to despatch10% within 30 days of date of invoice, after delivery.

This proposal shall only remain available for acceptance for 30 days from the above date.

PN 18172-2 2/3

8/14/2019 Crystal Precision Engineering- PN 18172-2

3/3

Riley Automation Ltd Conditions of Sale apply, a copy of which is attached to thisdocument.

If we can be of any further assistance, please do not hesitate to contact our Sales EngineerMick Sturgess who is available on 07974 706678.

Yours faithfully

Gary BirkinEngineering Director

PN 18172-2 3/3