crossings encroachments proximities sample information ... · pdf fileunderground pipeline...

The following includes samples information that AltaLink suggests that youUse Application or Proximity Notification. Theseand notifications. AltaLink may require additionalprocess if necessary.

Type of Work

Underground pipeline crossing

Above ground pipeline crossing

Underground cable crossing

Above ground cable crossing

Road crossing

Underground power line crossing

Aboveground power line crossing

Fence crossing

Pathway crossing

Any other crossing

Pumping station/metering station/riser siteencroachment

Power line proximity

Well site proximity

Pipeline/cable proximity

Any road proximity

Log deck proximity

Traffic light/signal proximity

Riser site/metering station proximity

Building/house proximity

Traffic light/signal encroachment

Temporary workspace proximity

Road widening

Any other proximity

CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE

information that AltaLink suggests that you include as part of your ROWUse Application or Proximity Notification. These samples were gathered based on previous application

AltaLink may require additional information, and will follow-up during the review

Suggested Sections

A, B

A, B, C

A, B

A, B, C

A, B

A, B

A, B, D

A, B, C

A, B

A, B

station/riser siteB, C

D

E

F, G (required if AltaLink’s minimum

requirements are not fulfilled)

H

I

J, K

site/metering station proximity L

M, N (required if house is proposed

within AltaLink’s power line setback box)

J, K

O

P

Plan


as part of your ROWwere gathered based on previous applications

up during the review

SECTION A

This section shows a sample crossing plan whichcrossing plan should have clear identification of proposed facility in relation to the location of theexisting AltaLink facility. We request thatand distances to the crossing location.

POWER POLE/TOWER (1) TAG# (e.g.904L76)POWER POLE/TOWER (1) DIRECTION:POWER POLE/TOWER (2) TAG# (e.g.904L76)POWER POLE/TOWER (2) DIRECTION: East/West/North/SouthDISTANCES FROM POWER POLE/TOWER TO EDGE OF


This section shows a sample crossing plan which should be submitted for each crossing request. Thecrossing plan should have clear identification of proposed facility in relation to the location of the

We request that the applicant provide tag numbers of AltaLinkcrossing location.

POWER POLE/TOWER (1) TAG# (e.g.904L76)POWER POLE/TOWER (1) DIRECTION: East/West/North/SouthPOWER POLE/TOWER (2) TAG# (e.g.904L76)POWER POLE/TOWER (2) DIRECTION: East/West/North/South

POLE/TOWER TO EDGE OF PROPOSED RIGHT OF WAY:


submitted for each crossing request. Thecrossing plan should have clear identification of proposed facility in relation to the location of the

AltaLink’s power pole

metres

NOTE:- A minimum separation of 5 metresdisturbance.- A minimum separation of 10 metresdisturbance.


metres is required between all AltaLink's power poles, anchors and any soil

metres is required between all AltaLink's towers, anchors and any soil


's power poles, anchors and any soil

's towers, anchors and any soil

SECTION B

This section shows a sample survey data sheet whichBlank copies of survey data sheets are available


This section shows a sample survey data sheet which we suggest to submit with each crossing request.Blank copies of survey data sheets are available at www.AltaLink.ca/right-of-way.


with each crossing request.

SECTION C

This section is required when an above ground facility is proposed.

Please provide the following information:

Description on above ground facility

o What is it?

o How it will be installed above ground?

o What it is made of?

Will any ground elevation change be required?

Distance from existing ground to highest point of proposed facility:

Height of above ground facility:

Is the facility permanent/temporary?

Drawings of proposed facility


an above ground facility is proposed.


Description on above ground facility:

How it will be installed above ground?

What it is made of?

Will any ground elevation change be required?

Distance from existing ground to highest point of proposed facility: metres

Height of above ground facility: metres (if applicable)

permanent/temporary?

Drawings of proposed facility


metres (if applicable)

SECTION D

This section is required when an above ground power line facility is proposed.


Voltages of upcoming power line:

Upcoming power line conductor type:

Ruling span of upcoming power line:

Span length of crossing span (distance from first power pole to second power pole):

metres

Number of insulators:

Distance between AltaLink’s power pole and closest phase of upcoming

metres

Permanent/temporary :

AEUC and CSA clearance requirement between two circuits at crossing location:

Calculated clearance between line of sight of upcoming power line and lowest wire of

power line sagging at 100⁰C

Drawings of power pole that will be located on either side of

Ground elevation change occurring at crossing location?

If answered “yes” to above question then specify following details:

Cut: metres

Fill: metres

Height/distance from existing ground to upcoming power line’s line of sight at crossing location:

metres


This section is required when an above ground power line facility is proposed.


Voltages of upcoming power line: kV

conductor type:

Ruling span of upcoming power line: metres


’s power pole and closest phase of upcoming power line:

AEUC and CSA clearance requirement between two circuits at crossing location:

Calculated clearance between line of sight of upcoming power line and lowest wire of

⁰C at crossing location: metres (if available)

Drawings of power pole that will be located on either side of AltaLink power line

Ground elevation change occurring at crossing location?

If answered “yes” to above question then specify following details:

metres

metres




power line:

AEUC and CSA clearance requirement between two circuits at crossing location: metres

Calculated clearance between line of sight of upcoming power line and lowest wire of AltaLink’s

power line


SECTION E

This section shows a sample well site plan whichplan should show distances between

Please provide the following information on the drawing:

1) The distance between AltaLink’s closest right of way

2) The distance between AltaLink’s closest power line (wire) and well

3) The distance between AltaLink’s closest

4) The distance between AltaLink’s clo


This section shows a sample well site plan which is required for each well site proximity request. Thisplan should show distances between AltaLink’s power lines and well site as shown in the plan below.

Please provide the following information on the drawing:

’s closest right of way boundary and wellsite:

’s closest power line (wire) and wellsite: metres

’s closest right of way boundary and wellhead:

’s closest power line (wire) and wellhead: metr


for each well site proximity request. This’s power lines and well site as shown in the plan below.

metres

metres

metres

metres


*Courtesy of Boundary Technical*Courtesy of Boundary Technical Group Inc.

SECTION F

This section shows a sample plan of a pipeline proximity request, which iscable proximity request.


This section shows a sample plan of a pipeline proximity request, which is suggested for each pipeline or


for each pipeline or

SECTION G

This section details AltaLink requirements for pipelines or other excavations which are paralleling anAltaLink power line. This type of drawing is required when the following separation requirements arenot fulfilled:

5 metres of distance between any s

10 metres of distance between any soil disturbance and steel tower

The details in this section must reflect the smallest separation between the power pole/tower and theedge of trench and the steepest slope of trench to allow for an accurate assessment of the proposedfacility’s effect on the AltaLink line.


requirements for pipelines or other excavations which are paralleling anpower line. This type of drawing is required when the following separation requirements are

between any soil disturbance and wood pole;

between any soil disturbance and steel tower.

The details in this section must reflect the smallest separation between the power pole/tower and thed the steepest slope of trench to allow for an accurate assessment of the proposed

ink line.


requirements for pipelines or other excavations which are paralleling anpower line. This type of drawing is required when the following separation requirements are

The details in this section must reflect the smallest separation between the power pole/tower and thed the steepest slope of trench to allow for an accurate assessment of the proposed

X1: metres

X2: metres

Y1: metres

Y2: metres

Z (Ratio):

Type of pipeline:

Method of pipeline installation:

Pipeline material:


Engineer stamp


Engineer stamp

SECTION H

This section shows a sample plan which is


This section shows a sample plan which is suggested for each road proximity request.

*Courtesy of Boundary Technical Group Inc.


*Courtesy of Boundary Technical Group Inc.

SECTION I

This section shows a sample plan which is


This section shows a sample plan which is suggested for each log deck proximity request.


each log deck proximity request.

SECTION J

This section shows a sample plan which isencroachment request. On this plan the distance between each light/traffic signal and power linebe shown clearly. If the lights or traffic signals have devit arms, the distancenearest edge of light pole/traffic signal to the power line and the power line itself.


This section shows a sample plan which is suggested for each traffic signal/light pole proximity and/orencroachment request. On this plan the distance between each light/traffic signal and power linebe shown clearly. If the lights or traffic signals have devit arms, the distance should be shown betweennearest edge of light pole/traffic signal to the power line and the power line itself.


for each traffic signal/light pole proximity and/orencroachment request. On this plan the distance between each light/traffic signal and power line should

be shown between

SECTION K

This section shows a sample specification drawing which isthat is being used in the proposed project. This type of drawingsignal/light encroachment and/or proximity


This section shows a sample specification drawing which is suggested for each type of light/traffic signalproposed project. This type of drawing should be submitted with traffic

encroachment and/or proximity.


for each type of light/traffic signalbe submitted with traffic

SECTION L

This section shows a sample plan of which isproximity notification.

The distance between the edge of thesite/pumping station/metering station:


This section shows a sample plan of which is suggested for each pipeline riser site/metering site

The distance between the edge of the AltaLink right of way/VCE/LOC/EZE and closest edge of risersite/pumping station/metering station: metres


each pipeline riser site/metering site

right of way/VCE/LOC/EZE and closest edge of riser

SECTION M

This section shows a sample plan for houses proposed in proximity toof plan is suggested for each house proximity


This section shows a sample plan for houses proposed in proximity to AltaLink’s right of way. This typeeach house proximity notification.


’s right of way. This type

SECTION N

If a house is proposed within the horizontal setback distanceshould be submitted with the notificationfacilities to be located in the lot.


If a house is proposed within the horizontal setback distance AltaLink provided, then this type of plannotification. This plan should detail the house’s maximum height, and


provided, then this type of plan. This plan should detail the house’s maximum height, and all

SECTION O

This section shows a sample plan which isnotification.


This section shows a sample plan which is suggested for each temporary workspace proximity


for each temporary workspace proximity

SECTION P

This section shows a sample plan which is suggestedutilities clearly and any extra right of way that is purchased for road widening (if applicable).


suggested for each road widening request in proximity to AltaLink lines. This plan should show allutilities clearly and any extra right of way that is purchased for road widening (if applicable).

lines. This plan should show all

crossings encroachments proximities sample information ... · pdf fileunderground pipeline...

Documents