Slide 1

Crop Farming and Sustainability The good and the bad

Slide 2

Crops-Corn, Soybeans, Wheat The 3 main crops grown in Southern Canada and the U.S are

Slide 3

Why only 3 crops? Once harvested and properly dried, crops store and transport easily High demand as they are found within most foods we eat High yields due to seed engineering meaning farmers make more money

Slide 4

Traditional Crop Tillage Method Plowing was traditional way of preparing land (called seed beds) for crops Kills weeds by exposing roots to the sun and dries the soil by aerating 1 horse can plow 1 acre per day Modern plowing

Slide 5

Negatives Plowing creates soil erosion and dead pan hard infertile soil Exposed soils are easily moved by wind and rain Worldwide 25 billion metric tons of annual soil loss Results in the sediment loading of rivers and lakes Increase in fertilizers to maintain profitability

Slide 6

Water Erosion Create Rills and Gullies = lose soil

Slide 7

Possible Solutions

Slide 8

Managing Topography Contour Plowing Planting perpendicular to water runoff

Slide 9

Strip Farming

Slide 10

The planting of different kinds of crops in alternating strips along land contours When one crops is harvested the other is still present to protect the soil Used in hilly terrain and polyculture farming multiple crop in the same

Slide 11

Cover Crops - Planted within harvested crop to provide ground cover This prevents erosion by roots binding soil together and dissipating energy during rainfall Keeps moisture in the ground

Slide 12

No till drilling

Slide 13

No Till Drilling This type of planting pushes the seed into soil through previous crop residue Minimal soil disturbance and lower rates of erosion The introduction of Roundup Ready seeds has increased no-till drilling

Slide 14

No Till Air Drill

Slide 15

Round Up Ready Corn A few months later Before Round Up After Round Up

Slide 16

Ridge Tillage Leaves up to 75 percent of plant debris on the surface between the rows, preventing erosion The seed is placed in the same row as the previous years plant/root system

Slide 17

Reduces the number of times a farmer will disturbs the soil Reducing costs for fuel because tillage equipment is only disturbing a specific area, not cultivating the whole field

Slide 18

Low input - Sustainable Agriculture