cree xlamp xq-a led data sheet xlamp xq-a led data sheet ... ul®

Product family data sheet

Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.

Cree, Inc.4600 Silicon Drive

Durham, NC 27703USA Tel: +1.919.313.5300

ww

w.C

Ree.

Co

m/X

LAm

pC

LD-D

S135 Rev

2

Cree® XLamp® XQ-A LEDs

ProDuCt DEsCriPtion

The XLamp® XQ-A LeD brings a

mid-power, cost-effective option to the

proven, compact ceramic XQ package,

enabling lighting manufacturers to quickly

and easily expand their product portfolio

by leveraging a common XQ design.

Unlike plastic mid-power LeDs, the

ceramic-based XQ-A LeDs are designed

to deliver the long-term calculated

lifetimes of Cree’s other high-power

LeDs. The XQ-A LeD’s combination

of optical symmetry and consistency

across all colors improves color mixing

and simplifies the production process

for lighting manufacturers. Available in

both white and color configurations, the

XQ-A LeD family opens up new design

possibilities for a wide spectrum of

lighting applications, such as portable,

directional and architectural lighting.

FEAturEs

• Cree’s smallest lighting class LeD:

1.6 X 1.6 mm

• Available in 70-, 80- & 90-CRI white,

and royal blue, blue, PC blue, green,

PC amber, red-orange & red

• Maximum drive current: white:

300 mA, color: 250 mA

• Wide viewing angle: white: 100°,

royal blue, blue, PC blue, PC amber:

105°, green, red -orange, red: 110°

• Reflow solderable - JEDEC

J-STD-020C compatible

• Unlimited floor life at

≤ 30 °C/85% RH

• RoHS compliant

• UL® recognized component

(e349212)

tAbLE oF ContEnts

Characteristics ........................................2

Flux Characteristics - White ....................3

Flux Characteristics - Color ....................4

Relative Spectral Power Distribution .....6

Relative Flux vs. Junction Temperature .7

electrical Characteristics ........................8

Relative Flux vs. Current .........................9

Relative Chromaticity vs. Current and

Temperature ..........................................11

Typical Spatial Distribution ...................12

Thermal Design .....................................13

Reflow Soldering Characteristics .........14

Notes .....................................................15

Mechanical Dimensions .......................16

Tape and Reel ........................................17

Packaging ..............................................18

http://www.cree.com/Xlamp


2

XLamp® XQ-a LED

ChArACtEristiCs

Characteristics unit Minimum typical Maximum

Thermal resistance, junction to solder point - white °C/W 20

Thermal resistance, junction to solder point - royal blue, blue, PC blue °C/W 17

Thermal resistance, junction to solder point - green °C/W 30

Thermal resistance, junction to solder point - PC amber °C/W 20

Thermal resistance, junction to solder point - red-orange, red °C/W 18

Viewing angle (FWHM) - white degrees 100

Viewing angle (FWHM) - royal blue, blue, PC blue, PC amber degrees 105

Viewing angle (FWHM) - green, red-orange, red degrees 110

Temperature coefficient of voltage - white mV/°C -2.8

Temperature coefficient of voltage - royal blue, blue, PC blue mV/°C -4

Temperature coefficient of voltage - green mV/°C -4.3

Temperature coefficient of voltage - PC amber mV/°C -4.2

Temperature coefficient of voltage - red-orange, red mV/°C -2.0

ESD withstand voltage (HBM per Mil-Std-883D) - white, royal blue, blue, PC blue, green, red-orange, red Class 3A

ESD classification (HBM per Mil-Std-883D) - PC amber Class 2

DC forward current-white mA 300

DC forward current - color mA 250

Reverse voltage v 5

Forward voltage (@ 175 mA, 85 °C) - white v 3.0 3.3

Forward voltage (@ 175 mA, 25 °C) - royal blue, blue, PC blue v 3.25 3.6

Forward voltage (@ 175 mA, 25 °C) - green v 3.4 3.6

Forward voltage (@ 175 mA, 25 °C) - PC amber v 3.4 3.7

Forward voltage (@ 175 mA, 25 °C) - red-orange, red v 2.2 2.6

LeD junction temperature °C 150


3

XLamp® XQ-a LED

FLuX ChArACtEristiCs - WhitE (tJ = 85 °C)

The following table provides several base order codes for XLamp XQ-A white LeDs. It is important to note that the base order codes listed

here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the

order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.

ColorCCt range Minimum Luminous Flux @ 175 mA

Calculated Minimum Luminous Flux (lm)

@ 85 °C**order Code

Minimum Maximum Group Flux (lm) @ 85 °C

Flux (lm) @ 25 °C* 300 mA

Cool White 5000 K 8300 K

M3 45.7 52.6 65.6 XQAAWT-00-0000-00000L3e2

N2 51.7 59.5 74.2 XQAAWT-00-0000-00000L4e2

N3 56.8 65.3 81.6 XQAAWT-00-0000-00000L5e2

70-CRI Minimum

White3700 K 8300 K

M3 45.7 52.6 65.6 XQAAWT-00-0000-00000B3E2

N2 51.7 59.5 74.2 XQAAWT-00-0000-00000B4E2

N3 56.8 65.3 81.6 XQAAWT-00-0000-00000B5E2

Neutral White 3700 K 5300 K

M2 39.8 45.8 57.1 XQAAWT-00-0000-00000L2e4

M3 45.7 52.6 65.6 XQAAWT-00-0000-00000L3e4

Warm White 2700 K 3500 KK3 35.2 40.5 50.5 XQAAWT-00-0000-00000LZe7

M2 39.8 45.8 57.1 XQAAWT-00-0000-00000L2e7

80-CRI Minimum

White2700 K 3500 K

K3 35.2 40.5 50.5 XQAAWT-00-0000-00000HZE7

M2 39.8 45.8 57.1 XQAAWT-00-0000-00000H2E7

90-CRI Minimum

White2850 K 3000 K

K2 30.6 35.2 43.9 XQAAWT-00-0000-00000UYe7

K3 35.2 40.5 50.5 XQAAWT-00-0000-00000UZe7

Notes:• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on

CRI measurements. See the Measurements section (page 15).• Typical CRI for Cool White (5000 K – 8300 K CCT) is 70.• Typical CRI for Neutral White (3700 K – 5300 K CCT) is 75.• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80.• Minimum CRI for 70-CRI Minimum White is 70.• Minimum CRI for 80-CRI Minimum White is 80.• Minimum CRI for 90-CRI Minimum White is 90.* Flux values @ 25 °C are calculated and for reference only.** Calculated flux values at 350 mA are for reference only.


4

XLamp® XQ-a LED

FLuX ChArACtEristiCs - CoLor (tJ = 25 °C)

The following table provides several base order codes for XLamp XQ-A color LeDs. It is important to note that the base order codes listed

here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the

order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.

Color

Dominant Wavelength rangeMinimum Radiant Flux @ 175 mA Calculated

Minimum PPF (µmol/s)*

order CodeMinimum Maximum

Group DWL (nm) Group DWL

(nm) Group Flux (mW)

Royal Blue D36 450 D57 46511 210 0.80 XQAROY-00-0000-000000601

12 250 0.95 XQAROY-00-0000-000000701

Color

Dominant Wavelength rangeMinimum Luminous Flux @ 175 mA

order CodeMinimim Maximum


(nm) Group Flux (lm)

Blue B3 465 B6 485F2 10.7 XQABLU-00-0000-000000T01

G2 13.9 XQABLU-00-0000-000000U01

Color Color binMinimum Luminous Flux @ 175 mA

order CodeGroup Flux (lm)

PC Blue N4B & N5B H0 18.1 XQAAPB-00-0000-000000V01

Color

Dominant Wavelength rangeMinimum Luminous Flux @ 175 mA Calculated





Green G2 520 G4 535

K2 30.6 0.28 XQAGRN-00-0000-000000Y01

K3 35.2 0.32 XQAGRN-00-0000-000000Z01

M2 39.8 0.36 XQAGRN-00-0000-000000201

Color Color binMinimum Luminous Flux @ 175 mA

order CodeGroup Flux (lm)

PC Amber Y2

J3 26.8 XQAAPA-00-0000-000000X01

K2 30.6 XQAAPA-00-0000-000000Y01

K3 35.2 XQAAPA-00-0000-000000Z01

Note• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a

tolerance of ±2 on CRI measurements. See the Measurements section (page 15).* Photosynthetic Photon Flux (PPF) values are calculated and for reference only.


5

XLamp® XQ-a LED

Color

Dominant Wavelength rangeMinimum Luminous Flux @ 175 mA




Red-Orange O3 610 O4 620

K2 30.6 XQARDO-00-0000-000000Y01

K3 35.2 XQARDO-00-0000-000000Z01

M2 39.8 XQARDO-00-0000-000000201

Color

Dominant Wavelength rangeMinimum Luminous Flux @ 175 mA Calculated





Red R2 620 R3 630

J2 23.5 0.61 XQAReD-00-0000-000000W01

J3 26.8 0.70 XQAReD-00-0000-000000X01

K2 30.6 0.80 XQAReD-00-0000-000000Y01

FLuX ChArACtEristiCs - CoLor (tJ = 25 °C) - Continued

Note• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a

tolerance of ±2 on CRI measurements. See the Measurements section (page 15).* Photosynthetic Photon Flux (PPF) values are calculated and for reference only.


6

XLamp® XQ-a LED

rELAtivE sPECtrAL PoWEr DistributionRelative Spectral Power

0%

20%

40%

60%

80%

100%

380 430 480 530 580 630 680 730 780

Rela

tive

Radi

ant P

ower

Wavelength (nm)

Warm White

Relative Spectral Power

0%

20%

40%

60%

80%

100%

380 430 480 530 580 630 680 730 780

Rela

tive

Radi

ant P

ower

Wavelength (nm)

Royal Blue

Blue

PC Blue

Green

PC Amber

Red-Orange

Red


7

XLamp® XQ-a LED

rELAtivE FLuX vs. JunCtion tEMPErAturE (iF = 175 mA)Relative Flux Output vs. Junction Temperature

0%

20%

40%

60%

80%

100%

120%

25 50 75 100 125 150

Rela

tive

Lum

inou

s Fl

ux

Junction Temperature (ºC)

White

Relative Flux Output vs. Junction Temperature

0%

20%

40%

60%

80%

100%

120%

25 50 75 100 125 150

Rela

tive

Radi

ant F

lux


Royal Blue


8

XLamp® XQ-a LED

rELAtivE FLuX vs. JunCtion tEMPErAturE (iF = 175 mA) - Continued

ELECtriCAL ChArACtEristiCs (tJ = 85 °C)

Relative Flux Output vs. Junction Temperature

0%

20%

40%

60%

80%

100%

120%

25 50 75 100 125 150

Rela

tive

Lum

inou

s Fl

ux


Blue

PB Blue

Green

PC Amber

Red-Orange

Red

Electrical Characteristics (Tj = 85ºC)

0

50

100

150

200

250

300

1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70

Forw

ard

Cur

rent

(m

A)

Forward Voltage (V)

White


9

XLamp® XQ-a LED

ELECtriCAL ChArACtEristiCs (tJ = 25 °C)

rELAtivE FLuX vs. CurrEnt (tJ = 85 °C)

Electrical Characteristics (Tj = 85ºC)

0

50

100

150

200

250

1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70

Forw

ard

Cur

rent

(m

A)

Forward Voltage (V)

Royal Blue, Blue,PC BlueGreen

PC Amber

Red-Orange, Red

Relative Intensity vs. Current (Tj = 85ºC)

0%

25%

50%

75%

100%

125%

150%

0 50 100 150 200 250 300

Rela

tive

Lum

inou

s Fl

ux

Forward Current (mA)

White


10

XLamp® XQ-a LED

rELAtivE FLuX vs. CurrEnt (tJ = 25 °C)Relative Intensity vs. Current

0%

25%

50%

75%

100%

125%

150%

0 50 100 150 200 250

Rela

tive

Radi

ant F

lux


Royal Blue

Relative Intensity vs. Current

0%

25%

50%

75%

100%

125%

150%

0 50 100 150 200 250

Rela

tive

Lum

inou

s Fl

ux


Blue, PC Blue

Green

PC Amber

Red-Orange

Red


11

XLamp® XQ-a LED

ReLAtive ChRoMAtiCity vs. CuRRent And teMpeRAtuRe (WARM White)Relative Chromaticity Vs. Current, WW

-0.020

-0.015

-0.010

-0.005

0.000

0.005

0.010

0.015

0.020

0 50 100 150 200 250 300

Current (mA)

ΔCCx

ΔCCy

Relative Chromaticity Vs. Temperature, WW

-0.020

-0.015

-0.010

-0.005

0.000

0.005

0.010

0.015

0.020

25 50 75 100 125 150

Tsp (°C)

ΔCCx

ΔCCy


12

XLamp® XQ-a LED

tyPiCAL sPAtiAL DistributionTypical Spatial Radiation Pattern-white

0%

20%

40%

60%

80%

100%

120%

-90 -70 -50 -30 -10 10 30 50 70 90

Rela

tive

Lum

inou

s In

tens

ity

Angle (º)

White

Typical Spatial Radiation Pattern-color

0%

20%

40%

60%

80%

100%

120%

-90 -70 -50 -30 -10 10 30 50 70 90

Rela

tive

Lum

inou

s In

tens

ity

Angle (º)

Royal Blue, BluePC BlueGreen

PC Amber

Red-Orange, Red


13

XLamp® XQ-a LED

thErMAL DEsiGn

The maximum forward current is determined by the thermal resistance between the LeD junction and ambient. It is crucial for the end

product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life

and optical characteristics.

White royal blue, blue, PC blue

Thermal Design - white

0

50

100

150

200

250

300

350

0 20 40 60 80 100 120 140 160

Max

imu

m C

urr

ent

(mA

)

Ambient Temperature (ºC)

Rj-a = 25 °C/W

Rj-a = 30 °C/W

Rj-a = 35 °C/W

Rj-a = 40 °C/W

Thermal Design - blue

0

50

100

150

200

250

300

0 20 40 60 80 100 120 140 160

Max

imu

m C

urr

ent

(mA

)


Rj-a = 20 °C/W

Rj-a = 25 °C/W

Rj-a = 30 °C/W

Rj-a = 35 °C/W

Green PC Amber

Thermal Design - green

0

50

100

150

200

250

300

0 20 40 60 80 100 120 140 160

Ma

xim

um

Cu

rre

nt

(mA

)


Rj-a = 40 °C/W

Rj-a = 45 °C/W

Rj-a = 50 °C/W

Rj-a = 55 °C/W

Thermal Design - PC amber

0

50

100

150

200

250

300

0 20 40 60 80 100 120 140 160

Ma

xim

um

Cu

rre

nt

(mA

)


Rj-a = 25 °C/W

Rj-a = 30 °C/W

Rj-a = 35 °C/W

Rj-a = 40 °C/W

red-orange, red

Thermal Design - red-orange, red

0

50

100

150

200

250

300

0 20 40 60 80 100 120 140 160

Ma

xim

um

Cu

rre

nt

(mA

)


Rj-a = 20 °C/W

Rj-a = 25 °C/W

Rj-a = 30 °C/W

Rj-a = 35 °C/W


14

XLamp® XQ-a LED

rEFLoW soLDErinG ChArACtEristiCs

In testing, Cree has found XLamp XQ-A LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general

guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used,

and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.

Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.

Profile Feature Lead-Free solder

Average Ramp-Up Rate (Tsmax to Tp) 1.2 °C/second

Preheat: Temperature Min (Tsmin) 120 °C

Preheat: Temperature Max (Tsmax) 170 °C

Preheat: Time (tsmin to tsmax) 65-150 seconds

Time Maintained Above: Temperature (TL) 217 °C

Time Maintained Above: Time (tL) 45-90 seconds

Peak/Classification Temperature (Tp) 235 - 245 °C

Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds

Ramp-Down Rate 1 - 6 °C/second

Time 25 °C to Peak Temperature 4 minutes max.

Note: All temperatures refer to topside of the package, measured on the package body surface.

IPC/JEDEC J-STD-020C

TP

TL

Tem

pera

ture

Timet 25˚C to Peak

Preheatts

tS

tP

25

Ramp-down

Ramp-up

Critical ZoneTL to TP

Tsmax

Tsmin


15

XLamp® XQ-a LED

notEs

MeasurementsThe luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only

and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number

of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated

values are provided for informational purposes only and are not intended or provided as specifications.

pre-Release Qualification testingPlease read the LeD Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp

LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.

Lumen MaintenanceCree now uses standardized IeS LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LeD lumen maintenance.

For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.

Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.

Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect

the LeD junction temperature.

Moisture sensitivityCree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.

Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.

Once the MBP is opened, XLamp XQ-A LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in

conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the

original MBP.

rohs ComplianceThe levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold

limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as

implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product

ecology section of the Cree website.

uL® recognized ComponentThis product meets the requirements to be considered a UL Recognized Component with Level 1 enclosure consideration. The LeD

package or a portion thereof has not been investigated as a fire enclosure or a fire and electrical enclosure per ANSI/UL 8750.

vision AdvisoryWARNING: Do not look at an exposed lamp in operation. eye injury can result. For more information about LeDs and eye safety, please

refer to the LeD eye Safety application note.

http://www.cree.com/led-components/media/documents/XLamp_Reliability.Rev2.pdf

http://www.cree.com/led-components/media/documents/LM80_Results.pdf

http://www.cree.com/led-components/media/documents/XLamp_lumen_maintenance.pdf

http://www.cree.com/led-components/media/documents/XLampThermalManagement.pdf

http://www.cree.com/led-components/support/product-ecology/

http://www.cree.com/led-components/support/product-ecology/

http://www.cree.com/led-components/media/documents/XLamp_EyeSafety-19.pdf


16

XLamp® XQ-a LED

MEChAniCAL DiMEnsions

Thermal vias, if present, are not shown on these drawings.

All dimensions in mm.

Measurement tolerances unless indicated otherwise: ±.13 mm

.SIZE

TITLE

OF

REV.

SHEETC

DRAWING NO.

DATE

DATE

DATE

CHECK

FINAL PROTECTIVE FINISH

MATERIAL

APPROVED

DRAWN BY

THIRD ANGLE PROJECTION

SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300Fax (919) 313-5558

4600 Silicon DriveDurham, N.C 27703

UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION

OF CREE INC.

NOTICE

X° ± .5°.XXX ± .25.XX ± .75.X ± 1.5

FOR SHEET METAL PARTS ONLY

.XX ± .25

.XXX ± .125X° ± .5°

UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN

MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED:

SURFACE FINISH: 1.6

.30

1.60

.65

1.60

.30

1.50

3.300

3.30

1.60

1.60

1.60

1.50

.60 .60

.30

R.936

.38

.44

1/145.000D2610-00035

XQE_XQA OUTLINE

--

--

7/19/13J. Nevins

----

7/19/13D. Seibel

REVISONSREV DESCRIPTION BY DATE APP'D A Initial Release DDS 7/19/13 B UPDATED OVERALL COMPONENT HEIGHTDC 6/9/15C ADDED OPTICAL REF. DC 12/8/15YCD CHANGED HEIGHT TO BLEND XQE/XQA TOGETHERDC 12/17/15SL

RECOMMENDED PC BOARD SOLDER PAD

RECOMMENDED TRACE LAYOUT

ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED

OPTICAL REFERENCE

SOLDER PADREFERENCE

OPTICAL REFERENCE

NOTCH IS ONCATHODE(-) SIDE

top view side view bottom view

SIZE

TITLE

OF

REV.

SHEETC

DRAWING NO.

DATE

DATE

DATE

CHECK


MATERIAL

APPROVED

DRAWN BY


SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300Fax (919) 313-5558



OF CREE INC.

NOTICE

X° ± .5°.XXX ± .25.XX ± .75.X ± 1.5


.XX ± .25

.XXX ± .125X° ± .5°



SURFACE FINISH: 1.6

.30

1.60

.65

1.60

.30

1.50

3.300

3.30

1.60

1.60

1.60

1.50

.60 .60

.30

R.936

.38

.44

1/145.000D2610-00035

XQE_XQA OUTLINE

--

--

7/19/13J. Nevins

----

7/19/13D. Seibel





OPTICAL REFERENCE

SOLDER PADREFERENCE

OPTICAL REFERENCE


SIZE

TITLE

OF

REV.

SHEETC

DRAWING NO.

DATE

DATE

DATE

CHECK


MATERIAL

APPROVED

DRAWN BY


SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300Fax (919) 313-5558



OF CREE INC.

NOTICE

X° ± .5°.XXX ± .25.XX ± .75.X ± 1.5


.XX ± .25

.XXX ± .125X° ± .5°



SURFACE FINISH: 1.6

.30

1.60

.65

1.60

.30

1.50

3.300

3.30

1.60

1.60

1.60

1.50

.60 .60

.30

R.936

.38

.44

1/145.000D2610-00035

XQE_XQA OUTLINE

--

--

7/19/13J. Nevins

----

7/19/13D. Seibel





OPTICAL REFERENCE

SOLDER PADREFERENCE

OPTICAL REFERENCE


Optical Reference

Optical Reference

Notch is on cathode (-) side

SIZE

TITLE

OF

REV.

SHEETC

DRAWING NO.

DATE

DATE

DATE

CHECK


MATERIAL

APPROVED

DRAWN BY


SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300Fax (919) 313-5558



OF CREE INC.

NOTICE

X° ± .5°.XXX ± .25.XX ± .75.X ± 1.5


.XX ± .25

.XXX ± .125X° ± .5°



SURFACE FINISH: 1.6

.30

1.60

.65

1.60

.30

1.50

3.300

3.30

1.60

1.60

1.60

1.50

.60 .60

.30

R.936

.38

.44

1/145.000D2610-00035

XQE_XQA OUTLINE

--

--

7/19/13J. Nevins

----

7/19/13D. Seibel





OPTICAL REFERENCE

SOLDER PADREFERENCE

OPTICAL REFERENCE


recommended trace layout

recommended PCb solder pad

SIZE

TITLE

OF

REV.

SHEETC

DRAWING NO.

DATE

DATE

DATE

CHECK


MATERIAL

APPROVED

DRAWN BY


SCALE

A

B

C

D

123456

6 5 4 3 2 1

A

B

C

D

Phone (919) 313-5300Fax (919) 313-5558



OF CREE INC.

NOTICE

X° ± .5°.XXX ± .25.XX ± .75.X ± 1.5


.XX ± .25

.XXX ± .125X° ± .5°



SURFACE FINISH: 1.6

.30

1.60

.65

1.60

.30

1.50

3.300

3.30

1.60

1.60

1.60

1.50

.60 .60

.30

R.936

.38

.44

1/145.000D2610-00035

XQE_XQA OUTLINE

--

--

7/19/13J. Nevins

----

7/19/13D. Seibel





OPTICAL REFERENCE

SOLDER PADREFERENCE

OPTICAL REFERENCE


Solder pad reference


17

XLamp® XQ-a LED

tAPE AnD rEEL

All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.

except as noted, all dimensions in mm [in].

Measurement tolerances unless indicated otherwise: .xx = ±.25 mm, .xxx = . ± 125 mm

CATHODE SIDE

ANODE SIDE

CATHODE SIDE

ANODE SIDECATHODE SIDE

ANODE SIDE

CATHODE SIDE

ANODE SIDE

Loaded Pockets(2,000 Lamps) Leader

400 mm (min) ofempty pockets with

at least 100 mmsealed by tape

(50 empty pockets min.)

Trailer160 mm (min) ofempty pockets

sealed with tape(20 pockets min.)

STARTEND

Cathode Side

Anode Side(denoted by + and circle)

2.5 ±.1

1.5 ±.1

8.0 ±.1

4.0 ±.1

1.75 ±.10

12.0 .0+.3

13mm7"

Cover Tape

Pocket Tape

User Feed Direction

User Feed Direction

Loaded Pockets(2,000 Lamps) Leader

400 mm (min) ofempty pockets with

at least 100 mmsealed by tape

(50 empty pockets min.)

Trailer160 mm (min) ofempty pockets

sealed with tape(20 pockets min.)

STARTEND

Cathode Side

Anode Side(denoted by + and circle)

2.5 ±.1

1.5 ±.1

8.0 ±.1

4.0 ±.1

1.75 ±.10

12.0 .0+.3

13mm7"

Cover Tape

Pocket Tape

User Feed Direction

User Feed Direction


18

XLamp® XQ-a LED

PACkAGinG

The diagrams below show the packaging and labels Cree uses to ship XLamp XQ-A LeDs. XLamp XQ-A LeDs are shipped in tape loaded

on a reel. each box contains only one reel in a moisture barrier bag.

Patent Label(on bottom of box)

Label with Cree Bin Code, Quantity, Reel ID


Label with Cree Order Code, Quantity, Reel ID, PO #

Label with Cree Order Code, Quantity, Reel ID, PO #


Unpackaged Reel

Packaged Reel

Boxed Reel

CREE Bin Code& Barcode Label

Vacuum-SealedMoisture Barrier Bag

Label with CustomerP/N, Qty, Lot #, PO #

Label with Cree Bin Code, Qty, Lot #

Label with Cree Bin Code, Qty, Lot #

Vacuum-Sealed Moisture Barrier Bag

Patent Label

Label with Customer Order Code, Qty, Reel ID, PO #

cree xlamp xq-a led data sheet xlamp xq-a led data sheet ... ul®

Documents