create your style mini projects st. patrick‘s day

CREATE YOUR STYLE MINI PROJECTSST. PATRICk‘S DAY

WWW.CREATE-YOUR-STYLE.COM

IRISh FLAg PENDANT NECkLACE

MINI PROJECT ST. PATRICk‘S DAY


STEP 1: String 9 XILION Bicone Beads article 5328 4 mm Fern green from the SWAROVSKI ELEMENTS assortment onto one headpin. Turn a loop at the top of the headpin. Repeat two more times.

STEP 2: Repeat step 1 using the Swarovski XILION Bead 4 mm White Alabaster and then repeat again using the XILION Bead 4 mm Sun.

STEP 3: String 10 Swarovski XILION Bead onto the 24 gauge wire alternating each bead with one of the beaded headpins made in steps 1 and 2. Start with the Fern green, then add the White Alabaster in the middle and the Sun at the other end. Link the headpins on the wire with the loop made at the top of each headpin. When the necklace is worn, the Fern green needs to be to the right.

Instructions

SwAROvSkI ELEMENTS

Product Group Article No. Amount Size Color Color Code

Beads 5328 27 pcs. 4 mm Fern Green 291

Beads 5328 27 pcs. 4 mm white Alabaster 281

Beads 5328 27 pcs. 4 mm Sun 248

Beads 5328 70 pcs. 4 mm Crystal 001


Supplies: 2” Silver headpins (9) 4” 24 gauge silver wire 2x2 crimp beads (4) Silver Lobster clasp (1) Silver crimp covers (4) 30” beading wire 6 mm silver jump ring (2)

Materials

Continuation on next page


STEP 4: Make a loop on both ends of the beaded wire from step 3.

STEP 5: Cut the beading wire in half. String one piece of wire through one loop formed in the wire in step 4. Add a crimp bead and string the beading wire over the loop and back through the crimp bead. Crimp the bead to secure. Attach a crimp cover over the crimped bead.

STEP 6: String on 5 Swarovski XILION Beads article 5328 4 mm and then add 3 XILION Beads 5 mm Crystal. Repeat this step 4 times and add 5 more XILION Beads 4 mm Crystal.

STEP 7: String beaded wire end through a crimp bead, then through the 6 mm jump ring and back through the crimp bead. Pull to take up slack in wire, but make sure the beads are not too tight – the beaded wire should be flexible. Crimp the crimp bead to secure and cover with crimp cover.

STEP 8: Repeat steps 6 and 7 for the other side of necklace. Open the jump ring and attach the lobster clasp. Close the jump ring to secure.

“Irish Flag Pendant Necklace”, page 2

IRISh FLAG BRACELET



SwAROvSkI ELEMENTS



Beads 5328 27 pcs. 6 mm white Alabaster 281


Beads 5752 1 pc. 12 mm Crystal 001

Supplies: 2 Tierra Cast 3 to 1 Connector (94-3055) 2x2 crimp beads (6) 30” beading wire 2” headpin (1) Magnetic Clasp (1) 6 mm jump rings (2)

Materials

STEP 1: Cut wire into 3 equal pieces.

STEP 2: String one wire end through a crimp bead then through an end loop in the Tierra Cast 3 to 1 connector and back through the crimp bead. Crimp the crimp bead to secure wire.

STEP 3: String on 9 XILION Bicone Beads article 5328 6 mm Sun from the SWAROVSKI ELEMENTS assortment. Next, string on 9 Swarovski XILION Beads in White Alabaster. Finally string on 9 Swarovski XILION Beads in Fern green.

Instructions

Continuation on next page


STEP 4: Then attach the crimp to the corresponding loop on the opposite Tierra Cast 3-1 connector. Crimp the bead to secure the wire.

STEP 5: Repeat steps 2 – 4 two more times to create all three strands of bracelet. STEP 6: Slide the Swarovski Clover Bead article 5752 12 mm Crystal to the headpin. Turn a loop on the headpin near

the top of the Clover Bead. Attach to one wire end and make sure loop is securely closed.

STEP 7: Attach magnetic clasps to both end of 3 to 1 connector with jump rings.

“Irish Flag Bracelet”, page 2

CELTIC CLOvER NECkLACE



SwAROvSkI ELEMENTS




Beads 5752 12 pcs. 8 mm Peridot 214


Supplies: 1 Tierra Cast Celtic Square Bead (94-5524) 4 Tierra Cast Celtic Diamond Bead (94-5526) 2x2 crimp beads (2) Lobster Clasp (1) 6 mm jump rings (2) 30” beading wire

Materials

STEP 1: String beading wire through a crimp bead, through a jump ring and back through the crimp bead. Crimp the bead to secure the wire.

STEP 2: String on the following one Swarovski XILION Bicone Bead article 5328 4 mm Fern green, one XILION Bead 6 mm Fern green, one XILION Bead 4 mm Fern green, one Clover Bead article 5752 8 mm Peridot, one XILION Bead 4 mm, one Clover Bead 12 mm, one XILION Bead 4 mm, one Clover Bead 8 mm, one XILION Bead 4 mm, one XILION Bead 6 mm, one XILION Bead 4 mm and one Tierra Cast Celtic Diamond Bead.

STEP 3: Repeat step 2 two more times, but the second time omit the last XILION Bead 4 mm and add one Tierra Cast Celtic Square Bead instead of the Celtic Diamond Bead.

STEP 4: Reverse pattern starting with the XILION Bead 6 mm to complete other side of necklace.

STEP 5: Repeat step 1 to finish necklace. Open jump ring and add lobster clasp. Close jump ring securely.

Instructions

CLOvER CROSS EARRINGS

STEP 1: Center the Clover Bead article 5752 8 mm Crystal from the SWAROVSKI ELEMENTS assortment on one headpin. Bend head pin on both sides to secure Bead in center.

STEP 2: Attach one end of headpin to loop in bottom of ear wire, turn a loop and wrap wire around headpin.

STEP 3: Repeat step 2 using the loop in the top of the Tierra Cast Small Celtic Cross.

STEP 4: Repeat steps 1 - 3 to complete other earring.

Instructions



SwAROvSkI ELEMENTS



Supplies: 2 Tierra Cast Small Celtic Cross (94-2089) 24 gauge 2” headpins French Ear wires (2)

Materials

CLOvER DROP EARRINGS

SwAROvSkI ELEMENTS




Beads 5752 2 pcs. 12 mm Emerald or Fern Green 205 or 291

STEP 1: Using one of the head pins, string on one Clover Bead article 5752 12 mm Emerald (or Fern green) from the SWAROVSKI ELEMENTS assortment, one XILION Bead article 5328 4 mm Sun and one Clover Bead 8 mm Peridot.

STEP 2: Center Swarovski Beads on headpin. Bend head pin on both sides to secure Beads in center.

STEP 3: Attach one end of head pin to loop in bottom of ear wire, turn a loop and wrap wire around head pin.

STEP 4: Repeat step 3 using the loop in the top of the Tierra Cast Clover pendant.

STEP 5: Repeat steps 1 - 4 to complete other earring.

Supplies: 2 Tierra Cast Clover pendant (94-2219) 24 gauge 3” headpins (2) French Ear wires (2)

Materials

Instructions



CLOvER DROP BRACELET



STEP 1: Attach all SWAROVSKI ELEMENTS to headpins.

STEP 2: Turn a loop on all headpins near the top of all Beads.

STEP 3: Attach the three 6 mm jump rings to the three Tierra Cast Celtic Cross pendants.

STEP 4: Attach all beaded headpins by wire wrapping in place and Celtic Cross pendants to the chain in random order skipping one to three links in between each depending type of chain.

STEP 5: Open both jump rings. Attach to both ends of chain. Attach lobster clasp to one jump ring. Close both jump rings to secure.

Instructions

SwAROvSkI ELEMENTS





Beads 5752 2 pcs. 8 mm Sunflower 292



Beads 5752 2 pcs. 12 mm Sunflower 292

Supplies: 2 Tierra Cast Clover small Celtic Cross (94-2089) 1 Tierra Cast Medium Celtic Cross (94-2193) 24 gauge 2” head pins (16) 7” Chain 6 mm jump rings (5) Silver lobster clasp (1)

Materials

create your style mini projects st. patrick‘s day

Documents